How to remove spare tire toyota corolla


Toyota Corolla Owners Manual: Location of the spare tire, jack and tools - If you have a flat tire - Steps to take in an emergency

Toyota Corolla Owners Manual / When trouble arises / Steps to take in an emergency / If you have a flat tire / Location of the spare tire, jack and tools

1 Luggage floor cover 2 Wheel nut wrench
3 Jack handle
4 Jack attachment*
5 Jack
6 Spare tire
7 Tool tray

*: The jack attachment is used when raising your vehicle with a floor jack.

CAUTION

■Using the tire jack

Observe the following precautions.

Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury.

●Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.

●Only use the tire jack that comes with this vehicle for replacing a flat tire.

Do not use it on other vehicles, and do not use other tire jacks for replacing tires on this vehicle.

●Put the jack properly in its jack point.

●Do not put any part of your body under the vehicle while it is supported by the jack.

●Do not start the engine or drive the vehicle while the vehicle is supported by the jack.

●Do not raise the vehicle while someone is inside.

●When raising the vehicle, do not put an object on or under the jack.

●Do not raise the vehicle to a height greater than that required to replace the tire.

●Use a jack stand if it is necessary to get under the vehicle.

●When lowering the vehicle, make sure that there is no-one near the vehicle. If there are people nearby, warn them vocally before lowering.

    Before jacking up the vehicle

    ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (automatic transmission or continuously variable transmission) or R (manual tran . ..

    Taking out the jack

    1 Remove the luggage floor cover. 2 Take out the jack. 1 For tightening 2 For loosening ...

    Other materials:

    Maintenance
    BMW maintenance system The maintenance system indicates required maintenance measures, and thereby provides support in maintaining road safety and the operational reliability of the vehicle. In some cases, scopes and intervals of the maintenance system may vary according to the country version. Rep ...

    Canceling and resuming the constant speed control
    1 Pulling the lever toward you cancels the constant speed control. The speed setting is also canceled when the brakes are applied or the clutch pedal (manual transmission) is depressed. 2 Pushing the lever up resumes the constant speed control. Resuming is available when the vehicle speed is mo ...

    Menu list of the Bluetooth audio/phone
    To enter a menu, press and navigate menus by using : *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. ■Bluetooth audio/phone system functions Depending on the Bluetooth device, certain functions may not be available. ...

    2022 Toyota Corolla Hatchback Manuals & Warranties

    Keys to Quality Maintenance

    Toyota Owner manuals and warranty information are the keys to quality maintenance for your vehicle. No need to hunt down a separate Toyota repair manual or Toyota service manual. From warranties on Toyota replacement parts to details on features, Toyota Owners manuals help you find everything you need to know about your vehicle, all in one place.

    Detailed Toyota manuals and Toyota warranty information help with questions about your vehicle specifications and maintenance schedules. Plus, learn more about what your Toyota warranty coverage includes. What's more, Toyota warranty information helps you identify your unique vehicle needs as well as plan future service visits. Select your Toyota model to learn more about the Toyota Warranty for your car, truck or SUV. Or, get the Toyota Manual for your Toyota ride free of charge using our Toyota Owners manual free download option.

    Read More

    Read Less

    Car older than 1990?

    To view or download additional manuals for most Toyota models produced prior to 1990, you can subscribe to our Technical Information System (TIS) at https://techinfo.toyota.com.

    To purchase copies of Owner's Manuals, please call (800) 782–4356 or visit www.helminc.com.

    Create an account and get the most out of your Toyota today.

    Join Now

    If you have a flat tire (vehicles with a spare tire)

    TABLE OF CONTENTS

    Before jacking up the vehicleLocation of the spare tire, jack and toolsTaking out the jackTaking out the spare tireReplacing a flat tireInstalling the spare tire

    PREVIOUS SECTION

    NEXT SECTION

    • Before jacking up the vehicle
    • Location of the spare tire, jack and tools
    • Taking out the jack
    • Taking out the spare tire
    • Replacing a flat tire
    • Installing the spare tire
    Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires:

    Tires

    Warning: If you have a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair, which could result in an accident. Before jacking up the vehicle Stop the vehicle in a safe place on a hard, flat surface. Set the parking brake. Shift the shift lever to P (continuously variable transmission) or R (manual transmission). Stop the engine. Turn on the emergency flashers. Jack Vehicle-equipped jack Jack handle Tools Spare tire Storage location Location of the spare tire, jack and tools Wheel nut wrench Jack handle Jack Spare tire Towing eyelet Warning: Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains. Only use the tire jack that comes with this vehicle for replacing a flat tire. Do not use it on other vehicles, and do not use other tire jacks for replacing tires on this vehicle. Put the jack properly in its jack point. Do not put any part of your body under the vehicle while it is supported by the jack. Do not start the engine or drive the vehicle while the vehicle is supported by the jack. Do not raise the vehicle while someone is inside. When raising the vehicle, do not put an object on or under the jack. Do not raise the vehicle to a height greater than that required to replace the tire. Use a jack stand if it is necessary to get under the vehicle. When lowering the vehicle, make sure that there is no-one near the vehicle. If there are people nearby, warn them vocally before lowering. Taking out the jack Press the button to raise the deck board handle and then lift the deck board. Secure the deck board. When the luggage cover is installed Hook the deck board handle onto the underside of the luggage cover as shown in the illustration, to secure the deck board. When the luggage cover is not installed Hook the deck board handle onto the upper edge of the back door opening as shown in the illustration. Take out the jack. For tightening For loosening Notice: When the deck board is secured Make sure not to close the back door when the deck board is hooked onto the luggage cover or the back door opening. Doing so may lead to damage to interior parts. Taking out the spare tire Secure the deck board. (

    Taking out the jack

    ) Loosen the center fastener that secures the spare tire. Warning: When storing the spare tire Be careful not to catch fingers or other body parts between the spare tire and the body of the vehicle. Replacing a flat tire Chock the tires.
    Flat tire Wheel chock positions
    Front left-hand side Behind the rear right-hand side tire
    Front right-hand side Behind the rear left-hand side tire
    Rear left-hand side In front of the front right-hand side tire
    Rear right-hand side In front of the front left-hand side tire
    Vehicles with a steel wheel: Remove the wheel ornament using the wrench. Insert the wrench into the notch on the wheel cap.To protect the wheel ornament, place a rag between the wrench and the wheel ornament. Slightly loosen the wheel nuts (one turn). Turn the tire jack portion by hand until the center of the recessed portion of the jack is in contact with the center of the jack point. Assemble the jack handle extension. Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. Warning: Replacing a flat tire Do not touch the disc wheels or the area around the brakes immediately after the vehicle has been driven. After the vehicle has been driven the disc wheels and the area around the brakes will be extremely hot. Touching these areas with hands, feet or other body parts while changing a tire, etc. may result in burns. Failure to follow these precautions could cause the wheel nuts to loosen and the tire to fall off, resulting in death or serious injury. Have the wheel nuts tightened with a torque wrench to 76 ft•lbf (103 N•m, 10.5 kgf•m) as soon as possible after changing wheels. Do not attach a heavily damaged wheel ornament, as it may fly off the wheel while the vehicle is moving. When installing a tire, only use wheel nuts that have been specifically designed for that wheel. If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. When installing the wheel nuts, be sure to install them with the tapered ends facing inward. Installing the spare tire Remove any dirt or foreign matter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off. Install the tire and loosely tighten each wheel nut by hand by approximately the same amount. When replacing a steel wheel with a steel wheel, tighten the wheel nuts until the tapered portion comes into loose contact with the disc wheel seat . When replacing an aluminum wheel with a steel wheel, tighten the wheel nuts until the tapered portion comes into loose contact with the disc wheel seat . Lower the vehicle. Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque:76 ft•lbf (103 N•m, 10. 5 kgf•m) Stow the flat tire, tire jack and all tools. Note: The compact spare tire The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily, and only in an emergency. Make sure to check the tire inflation pressure of the compact spare tire. (

    Tires and wheels

    ) When the compact spare tire is equipped The vehicle becomes lower when driving with the compact spare tire compared to when driving with standard tires. After completing the tire change The tire pressure warning system must be reset. (

    The tire pressure warning system must be initialized in the following circumstances:

    ) When using the compact spare tire As the compact spare tire is not equipped with a tire pressure warning valve and transmitter, low inflation pressure of the spare tire will not be indicated by the tire pressure warning system. Also, if you replace the compact spare tire after the tire pressure warning light comes on, the light remains on. If you have a flat front tire on a road covered with snow or ice (vehicles with a compact spare tire) Install the compact spare tire on one of the rear wheels of the vehicle. Perform the following steps and fit tire chains to the front tires: Replace a rear tire with the compact spare tire. Replace the flat front tire with the tire removed from the rear of the vehicle. Fit tire chains to the front tires. When reinstalling the wheel ornament (steel wheels except compact spare tire) Align the cutout of the wheel ornament with the valve stem as shown in the illustration. Warning: When using the compact spare tire Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. Do not use more than one compact spare tires simultaneously. Replace the compact spare tire with a standard tire as soon as possible. Avoid sudden acceleration, abrupt steering, sudden braking and shifting operations that cause sudden engine braking. When the compact spare tire is attached The vehicle speed may not be correctly detected, and the following systems may not operate correctly: ABS & Brake assist VSC TRAC Automatic High Beam Dynamic radar cruise control with full-speed range (if equipped) Dynamic radar cruise control (if equipped) EPS PCS (Pre-Collision System) LDA (Lane Departure Alert with steering control) (if equipped) LTA (Lane Tracing Assist) (if equipped) Tire pressure warning system Navigation system Speed limit when using the compact spare tire Do not drive at speeds in excess of 50 mph (80 km/h) when a compact spare tire is installed on the vehicle. The compact spare tire is not designed for driving at high speeds. Failure to observe this precaution may lead to an accident causing death or serious injury. After using the tools and jack Before driving, make sure all the tools and jack are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking. Notice: Be careful when driving over bumps with the compact spare tire installed on the vehicle. The vehicle becomes lower when driving with the compact spare tire compared to when driving with standard tires. Be careful when driving over uneven road surfaces. Driving with tire chains and the compact spare tire Do not fit tire chains to the compact spare tire. Tire chains may damage the vehicle body and adversely affect driving performance. When replacing the tires When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly.

    Toyota Corolla | Mandatory set of tools and spare wheel

    Toyota Corolla

    Service and operation

    Manuals → Toyota → Corolla (Toyota Corolla)

    1.6.6. Mandatory tool kit and spare wheel

    GENERAL

    In order to be prepared for problems on the road, you need to read with the rules for handling the jack and with each tool, as well as know their location.

    Sedan

    1. Nut

    2. Jack handle

    3. Jack

    4. Tool bag

    5. Spare wheel

    6. Spare wheel cover

    Hatchback

    1. Spare wheel cover

    2. Jack handle

    3. Jack

    4. Tool bag

    5. Spare wheel

    6. Nut

    Estate (type A)

    1. Jack

    2. Tool bag

    3. Jack handle

    4. Spare wheel

    Estate (type B)

    1. Spare wheel

    2. Tool bag

    3. Jack handle

    4. Jack


    To get the jack, turn the tie-down shackle hairpins (indicated by an arrow) in the CONTRACT direction (to reduce) to lay and secure the jack, turn the earring in the direction of EXPAND (spread).

    Spare wheel removal

    Universal models

    Arrow indicates bolt.

    All other models.

    1. Cap

    2. Bolt

    3. Spacer sleeve

    4. Nut


    PROCEDURE
    1. Loosen and remove the nut.
    2. Remove cover .
    3. Loosen and remove the tie bolt and remote sleeve .
    4. Remove the spare wheel.
    5. On station wagon models, to get the wheel, remove the cover and unscrew the bolt.
    6. When storing the spare wheel, the outer part disk should face up.
    7. Fasten the wheel in reverse order.

    Advertisement

    Where is the spare tire on my Toyota Corolla Verso?

    It is quite possible to find yourself in a difficult situation with a flat or punctured tire when you are driving serenely. There are currently several options available to you, including the ability to change your wheel . From this point of view, before starting, it is important to know where your spare tire is. In this article, we will teach you where to find a spare tire for Toyota Corolla Verso as well as various possible repair options.

    How to Replace a Fluorescent Light ...

    Please enable JavaScript

    How to Replace a Fluorescent Light Ballast?

    How to find the spare tire on my Toyota Corolla Verso

    How to find the spare tire on your Toyota Corolla Verso may differ depending on the year of manufacture. You will usually find this under the trunk of , accessible from inside the trunk, or sometimes accessible from the outside by unscrewing the clips in the trunk of a Toyota Corolla Verso. Sometimes it happens that it is positioned under the hood but these are a few cases.

    If you need to change the spare tire on your Toyota Corolla Verso, we invite you to look at our article on this topic:
    - How to change a wheel on a Toyota Corolla Verso
    It is possible that you do not have a regular spare tire available. Here are a few options:

    Various spare wheels or repair mode on your Toyota Corolla Verso:

    Towing wheel for your Toyota Corolla Verso:

    This small wheel, also called wafer , is less bulky than a regular wheel. Therefore, it has the advantage that has less space on your Toyota Corolla Verso , but at the cost of drag. Indeed, it will only be used in an emergency, we recommend that you drive a few kilometers and do not exceed 80 km / h, because it is not designed to withstand the speed is too high . So hurry up and join the nearest garage. Also pay special attention to cornering because your Toyota Corolla Verso will lean a little. unbalanced because pancake is thinner than than the other wheels already in place. Also make sure your brake pad pressure is checked frequently so you don't leave an unused spare tire on your Toyota Corolla Verso.

    Complete wheel:

    This wheel is identical to the wheel already installed on your Toyota Corolla Verso. Without risk, you can put it in place and thus drive with peace of mind. Be careful, make sure they really look like (in a compatible way) the wheels already installed on your Toyota Corolla Verso if you want to ride them.

    Tire repair kit for your Toyota Corolla Verso:

    As the name suggests, this allows the to repair a small puncture in the (with coagulating fluid) and temporarily re-inflate (with a small compressor connected to the cigarette lighter), allowing you to get to the nearest garage in your Toyota Corolla Verso. However, be careful, you cannot ride with this device indefinitely. We suggest you do not go beyond 80 km/h and about 200 km, so as not to risk it. Obviously, if you notice a hole in the tire of your Toyota Corolla Verso that is too large, don't take too many risks, the kit will not be able to fix all the problems. If the hole exceeds 5 millimeters of it will be very difficult to connect due to too high air pressure.

    Finding a spare tire for your Toyota Corolla Verso:

    That's why various information about spare tire search for your Toyota Corolla Verso as well as various possible troubleshooting options.


    Learn more