How can i dispose of old tires


Scrap Tires | Missouri Department of Natural Resources

Missouri citizens generate about six million scrap tires a year, or about one per person per year. Just what is a scrap tire? A scrap tire is a tire that can that can no longer be used as it was originally designed to be used, it has sat out in the elements for over a year, has been cut up in some fashion or someone has placed it somewhere just to be rid of it.

An environment free of scrap tires is important to the public health of all Missouri citizens. Why? Scrap tires can become homes for mosquitoes, snakes and other vermin. Mosquitoes breed in the stagnant water that collects inside tires. Because diseases transmitted by mosquitoes can be a serious health threat, removing and properly managing scrap tires is a priority in Missouri. 

Disposal Options

Do NOT burn them! It is illegal to burn tires in Missouri, except at facilities approved by the department. Uncontrolled tire burning can pollute our air, water and groundwater.

Some options for properly disposing of scrap tires are:

  • Homeowners may dispose of their tires with their household trash as long as they are properly cut first. Either cut the sidewalls out of each tire, creating two sidewalls and the tread ring, or cut each tire through the center of the tread ring (like a bagel) and dispose of the pieces with the household trash. Tires cut in either of these two ways are the only way a permitted sanitary landfill may accept tires for disposal.
  • For small numbers of scrap tires, choose the simple and easy route! Take those few tires to a tire dealer or retail store that sells tires and pay the disposal fee for each tire. These businesses will properly dispose of the used tires they collect.
  • For large numbers of scrap tires, contact a permitted scrap tire hauler to remove and dispose of the tire(s).
  • If you know of any scrap tire dumps and know of any non-governmental, non-profit organizations that might provide volunteers to help with a tire dump cleanup, the group may qualify to receive reimbursement for the disposal costs. For more information about this reimbursement program, visit Scrap Tire Cleanups by Non-Profit Groups.

The Bigger Picture

Surveyors measuring the tire piles at the RIM Tire site.

By 1990, illegal scrap tire piles had become so large and widespread in Missouri that the State Legislature passed Senate Bill 530. This legislation acknowledged scrap tires as a significant waste stream in the state and established a scrap tire fee to fund the Missouri Department of Natural Resources' scrap tire oversight and management activities, scrap tire cleanups by non-profit groups, educational programs/ curriculum about solid waste management and scrap tire surface material grants. The 50-cent scrap tire fee is applied to the retail sale of every new tire. 

Scrap tire shredding at the Bishop Tire Site, 2006.

From 2006 until 2018, the department conducted a scrap tire cleanup program called the Scrap Tire Roundup. The department partnered with the Missouri Department of Corrections to cleanup tire dump sites containing between 500 to 10,000 tires. Due to the economic feasibility of conducting these cleanups, the department shifted its focus from conducting tire cleanups to encouraging and supporting the development of alternative, beneficial uses for scrap tires. The department uses the funds generated by the scrap tire fees to create economic incentives for properly managing scrap tires in Missouri. The department also educates individuals and businesses and strives to maintain a level playing field for all industry members through permitting scrap tire processors, inspecting scrap tire businesses and taking enforcement actions as needed. For general information about managing scrap tires, visit Management of Scrap Tires - PUB2056.

Since authorization and funding began in 1990 -

  • A running track in which recycled scrap tires were used as the surface material.More than 17.6 million scrap tires from 1,386 scrap tire sites have been cleaned up, including properly disposing of all dumped tires.
    • The department estimates there are a little over 159,000 scrap tires in 132 known sites around the state that still need to be removed
    • The department estimates there may be an additional 500,000 tires remaining in dump sites statewide that have not been discovered
  • Approximately 2,000 scrap tire haulers have been permitted, with 60-70 haulers receiving new permits or renewing their existing permits each year.
  • Inspections are conducted each year at a number of the estimated 6,000-7,000 scrap tire collection centers located in the state
  • Approximately 30 scrap tire processors have been permitted for operation to process whole scrap tires into shredded tires, tire chips or crumb rubber as feedstock material for other uses.
  • By the end of 2021, the department estimates that over 40,000 tons of scrap tires will have been diverted from the waste stream and manufactured into a variety of playground surface materials, rubber mats, benches, tables, and other alternative uses for scrap tire materials.

For more information about scrap tires, visit Scrap Tire Guidance Documents and Fact Sheets.

Disposing of Tires from Your Home or Private Property - Texas Commission on Environmental Quality

Disposing of Tires from Your Home or Private Property Information for households and property owners about disposing of unwanted or abandoned tires. https://www.tceq.texas.gov/permitting/waste_permits/tires/tires-disposal-qa https://www.tceq.texas.gov/@@site-logo/TCEQ-logo-header.png

Information for households and property owners about disposing of unwanted or abandoned tires.

On this page:

    • Where can I get rid of tires I have at home?
    • Someone has dumped tires on my property. Who do I need to tell?
    • How do I get rid of tires someone has dumped on my property?
    • How do I find an authorized transporter that picks up tires in my area?
    • How do I report abandoned tires?
    • Where can I find rules about used or scrap tires?
    • Contact the Scrap Tire Program if you have other questions.

 

Where can I get rid of tires I have at home?

You may be able to dispose of your own used or scrap tires during a bulky trash collection event sponsored by your local government. A landfill may accept your tires directly, but will usually charge a fee.

Use the municipal solid waste facility map viewer to find landfill locations and phone numbers. Contact the landfill to confirm that it accepts tires for processing or disposal. If you have many tires, you may need to hire a scrap tire transporter to pick them up and haul them to an authorized scrap tire storage, processing, or disposal facility.

Someone has dumped tires on my property. Who do I need to tell?

To report abandoned tires, you can contact local city or county authorities, contact the TCEQ field office for your region, or file a complaint online with the TCEQ.

How do I get rid of tires someone has dumped on my property?

If there are just a few tires, you may be able to dispose of them during a bulky trash collection event sponsored by your local government, or take them to your local landfill. Use the municipal solid waste facility map viewer to find landfill locations and phone numbers.  Contact the landfill to confirm that it accepts tires for processing or disposal. If you have many tires, you may need to hire a scrap tire transporter to pick them up and haul them to an authorized scrap tire storage, processing, or disposal facility.

How do I find an authorized transporter that picks up tires in my area?

Follow this link to download a list of Active Used and Scrap Tire Handlers and Facilities in Texas.

How do I report abandoned tires?

Visit our Reporting Abandoned Tires page.

Where can I find rules about used or scrap tires?

Requirements (statutes and rules) for the management of used or scrap tires can be found online in Texas Health and Safety Code 361.112 361.1125 30 TAC 328, Subchapter F

Please contact the Scrap Tire Program if you have other questions about disposing of tires.

How to dispose of car tires and tires

The problem of car tires that have served their useful life is acute in all countries. The average period of operation of such products is 6-10 years, after which they must be changed. More than 25 million tons of such waste are generated annually in the world.

Since modern rubber has a complex composition and includes a metal cord, the wheels do not decompose in landfills. When stored or incinerated, they pose a threat to the environment. It is ecologically and economically correct to get rid of them - to recycle.

When choosing a recycling method, it is important to take into account the productivity of the line and the speed of the process, the energy consumption of the technology and the quality of the resulting product, and the presence of toxic emissions during processing.

Many do not know where to donate tires not for free so that they can earn money. Now almost every city has special points. Reception of worn tires is carried out every day. Where to drive up in the future to hand over waste can be found on the Internet.

Ways to dispose of tires

Shredded old rubber tires

The safest way to dispose of tires is to grind them with further use of the resulting crumb, which is also called granulate, semolina. You can hand over unusable tires at special collection points.

This technology, in comparison with pyrolysis (obtaining fuel oil from tires), has a number of advantages:

  • technical simplicity of the method;
  • no toxic emissions into the atmosphere;
  • preservation of technical parameters and chemical composition of the material;
  • wide possibilities of using the resulting crumb rubber.

Disadvantages of grinding car tires are the need for special and rather expensive equipment, as well as energy consumption. The most common methods are mechanical and shock-wave grinding of waste. Each of them has its own nuances.

Shock wave grinding

This waste disposal technology involves cooling raw materials to ultra-low temperatures in cryogenic chambers. Before the tires are disposed of, they are removed from the collection points and frozen to -80 degrees, after which the rubber is crushed by a shock wave in an armored chamber. It is produced by explosives or generated electronically. Crushing occurring in a closed system, where the shock wave circulates, involves only 2-3 technological stages. The output is a crushed mixture of rubber, steel and textile cord. Further separation takes place on the separator system.

Rubber crumb separator

Shock wave technology has a number of advantages:

  1. The method is suitable for used tires of any type and type. Using shock wave technology, it is convenient to process rubber from passenger cars, in which the specific content of steel cord is high. Also, the method is suitable for recycling tires from dump trucks with a diameter of up to 4 m. Other methods can process tires with a diameter of not more than 1.2 m.
  2. Even very fine crumbs can be obtained with this method, a special powder with a devulcanized layer for laying modified asphalt.
  3. The downtime factor for the repair and replacement of cutting elements of equipment is reduced to almost zero, while for the mechanical method this figure is 0.3-0.5. Explosive circulator has a service life of 10 years before overhaul.
  4. Low power consumption. Up to 250 kWh is required to process 1 ton of tires using shock wave technology. Mechanical recycling requires up to 1,000 kWh per ton of recycled tires.

But recycling car tires requires expensive equipment, including a special armored chamber for a safe explosion. This method is only suitable for large factories that dispose of a large amount of waste. It allows organizing the processing with a capacity of up to 30 thousand tons of tires from automobile wheels per year. It is also worth considering that this method imposes special requirements on the building.

Mechanical grinding

This is the easiest way to recycle car tires into crumbs. Such a business using this method is popular all over the world. He brings in a lot of money.

Mechanical shredding of old tires

Disposal of waste that you decide to take to a collection point includes the following steps:

  1. Waste tires are first sorted to make it easier to adjust the equipment to the dimensions of the raw material.
  2. Bead rings are cut from them using special equipment. Tires are cut into large pieces with hydraulic shears (tapes 4 cm wide). After that, the primary removal of the steel cord by a magnet can occur, or this stage is skipped in the technological scheme, cleaning occurs at the next stage and only once.
  3. Raw materials are crushed to the size of "chips" 2-10 cm 2 on a shredder, processed on a magnetic separator to separate the metal cord. The textile material is also removed from the mixture on the air separator.
  4. Chips are crushed even more (to the desired size) and passed through a sieve system for sorting into fractions.

When automating the process, this method takes a little time, is cheaper than shock wave technology, if the crushing of waste is carried out at normal temperature. In addition to standard conditions, mechanical grinding can be carried out with preheating or cooling of the raw material, using a press or an ozone knife. In cryogenic grinding, old tires are pre-cooled with liquid nitrogen, which makes it easier to separate the textile and steel cord. But the crumb turns out to be smooth, it does not bond well with binder polymers during further processing, and equipment for disposal is expensive. The ozone knife involves the use of an allotropic modification of oxygen and the conduct of the process under normal conditions. The technology is characterized by low energy consumption, no outgassing, but equipment will be required to produce ozone.

Minimum set of equipment for crumb rubber production

The most common way of processing tires is mechanical grinding under normal temperature conditions.

Tire Bead Remover

To obtain crumbs from the waste that the owners of the cars decided to hand over, you will need the following equipment:

  1. Bead Remover. It is necessary for the initial stage of waste processing. The landing ring from the tire is removed by cutting, punching or pulling out. There is practically no difference between these methods. Further utilization of the bead rings takes place on crimping machines, where the metal is squeezed out of the base.
  2. Shredders without sides. For crushing, various equipment can be used. At the first stage, it is effective to use hydraulic shears and lentozers to grind rubber tires into large fragments. The second crushing step takes place in the shredder. To obtain fine granules, a third stage and processing in roller plants is necessary.
  3. Vibrating sieve for product fractionation. This is a large table, the surface of which has holes corresponding to the size of the fraction. The crumb from the tires passes through it and is sifted due to the vibration of the table. The minimum number of vibrating sieves is 2. The first vibrating sieve separates coarse crumbs, which have not yet been fully processed. The second performs fine cleaning and sorts out the conditioned granulate.
  4. Conveyors and other machinery. Automated recycling of tires into crumbs is impossible without conveyors. They move raw materials from storage to processing, large pieces of rubber to grinding, as well as finished crumbs to bins. Such devices may be of the belt or screw type. To separate the steel cord, it is necessary to provide a magnetic separator in the line. With the help of an electromagnet, the metal is captured from the crumb, moved to a separate hopper. The textile cord is removed from the mixture by processing in an air separator. This is a cyclone in which the mixture is blown with air. In addition, the tire recycling line must have bins for raw materials and finished products.

The use of this equipment makes it possible to organize the processing of old tires even in a small factory, to obtain products of different sizes at the output: from "chips" to fine dust. With this recycling technology, there is no release of toxic compounds into the atmosphere.

Only 3-4 people are required to operate the tire recycling line, but the equipment will need to be connected to an industrial power supply to function.

What is made from recycled tires

The main properties of car rubber are preserved when it is crushed, so materials made from crumbs are highly durable and elastic, resistant to atmospheric factors, acid and alkali solutions. With the correct processing of old tires, the yield of granulate is about 70%. Therefore, handing over worn tires is the best solution.

Rubber crumb is widely used in various fields:

  1. Automotive industry. The granulate is used to make rubber elements of vehicles and new tires. It is in demand for coating in car washes and parking lots because it does not slip.
  2. Shoe production. The crumb is suitable for the manufacture of soles and rubber shoes, various rugs.
  3. Construction. Old tires should be handed over in order to produce materials for waterproofing and soundproofing. They are also used to make roofing, mastic for technical floors in factories that process chemically aggressive compounds.
  4. Mining. In oil wells, the crumb is used for plugging them.
  5. In public utilities. Tire granulate is suitable for creating a safe surface for children's and sports fields, football fields, courts, sidewalks and park paths. In the composition of such coatings, the share of granulate is more than 80%. The coating does not slip in winter, does not melt under the influence of sunlight. By adding pigments, the crumb can be painted in almost any color.
  6. In road construction. When laying asphalt, about 10% of crumbs are added to it. Speed ​​bumps are also made after the disposal and recycling of rubber. Curbs and bumpers are made from it.

Shredded old tires are also suitable for the formation of decorative garden figurines and sculptures, the manufacture of dielectrics, substrates and packaging for the safe transportation of goods. Rigid crumb in the form of granules is more often used to obtain seamless coatings. The shavings from the waste are sent to the production of pavement tiles. Fragments of a torn shape are suitable for the production of insulating materials. When arranging road surfaces, the lower layer is made of a coarse fraction (6-12 mm), and the upper one is made of fine and soft, 0.1-4 mm in size.

Playground surface made from recycled tires

Steel cord, which is recovered before grinding rubber tires, is sent to be melted down to produce rolled metal or to reinforce concrete structures. Its yield with proper processing is about 10%, another 8% is accounted for by the bead rings, which are sent for remelting. Textile cord can be used as a soundproofing material, filler for mats, sports equipment. Its output (fluff, threads) when recycling tires is within 10%.

How old tires are disposed of in Finland - Cars

  • Cars
  • Auto industry

Millions of old tires have accumulated in Russia. In legal and illegal dumps. They lie along roadsides, in wastelands, in yards, in forests and fields, even in the form of a flower bed fence. And we silently look at how a monstrous ecological catastrophe is ripening before our very eyes.

Mikhail Rostarchuk

Not only that. Every year, on the axles of new cars, from the warehouses of tire factories, about 80 million new tires are thrown into circulation - about a million tons! Which in three or four years they will “mouse” and leave. Anywhere. Despite existing but poorly functioning bans on unauthorized dumping of garbage. Including tires…

Most of the so-called civilized countries have already moved away from such a ruthless "interaction" with the environment. Including worn tires. In any case, in European countries, where since 1999 an EU directive has banned the disposal of whole or cut used tires, and a 2008 directive defines the principles of waste management in the interests of preserving the environment. And what about in Russia? There is a non-working federal law of 1998 "On production and consumption waste". There are amendments to it, which are shelved in the government of the country. All!

Meanwhile, in the development of amendments to the law, hung in the White House, one of the world's leading tire manufacturers, the Finnish Nokian Tires, a company familiar with the problem from hearsay, also took part. After all, the basis of the European tire recycling model is the principle of “producer responsibility”. And it was the three northern countries - Finland, Sweden and Norway, where they are especially reverent about the fragile and easily vulnerable Nordic environment, that back in 1993 became the culprits of civilized tire recycling in Europe.

Recycling must be transparent

What is the main point of the Finnish tire recycling model? Firstly, as a non-profit (!) institution, it is absolutely transparent, like water in thousands of Finnish lakes, although a solid financial flow flows in and out through its “vascular system”. Secondly, the state has not invested and is not investing either a euro or a cent in it, and therefore the Finnish way of recycling is not stuck in bureaucratic networks. Thirdly, it is effective - 100% of used tires are collected throughout the country, 120% (an increase due to the extraction of tires from old deposits) is either processed into secondary raw materials or used to generate electricity.

Risto Tuominen, a large, energetic man charged with an active life position in his very troublesome business, is the CEO of the non-profit Finnish Recycling Company (Suomen Rengaskierratys Oy). In addition to him, there is only one employee in the “office”. But it is they who are in charge of all this complex, but working like a clock, recycling mechanism. The founders and owners of the company are global tire brands operating in the country - Bridgestone, Continental, Goodyear, Nokian, Michelin, ARL. The system involves 289tire manufacturers, importers, tire wholesalers, used car recyclers, 2,535 waste tire collection points, 245 containers and two commercial operating companies (selected by tender) that organize tire collection, transportation, storage and disposal.

Tire tax

Who pays? That's right, buyer! On average, the price of a passenger car tire in Finland also includes 1.75 euros for recycling + 24% VAT on this amount. The Finnish car owner pays this fee even when he buys a new car. Tire sellers, as well as their manufacturers/importers, are strictly accountable for this recycling fee from each tire, which goes in full to Risto Tuominen's safe, and he already pays for the work of the operators. By the way, due to the growing revenue from the sale of secondary resources received from the disposal of tires, Tuominen reduces the amount of recycling fees paid by buyers. Characteristically: refusal to submit an application to the register of tire manufacturers / importers is punishable by a fine of 500 to 500,000 euros, "underground" import and sale of tires - from 500 to 10,000 euros. What's in the net residue? Finns don't have a headache about what to do with a worn tire, the state has no problems with the disposal of old rubber, Finnish society has one less problem related to environmental protection.

But killing an old tire is half the battle. The technology has already been developed, mobile mechanized columns have been created, wandering from landfill to landfill, deftly and quickly removing disks, steel cord from tires, shredding rubber into pieces and chips of various sizes, up to rubber crumb (depending on how this raw material will be used further ). It is especially important that the Scandinavians have learned to get considerable commercial benefits from used rubber.

What can be done with old rubber

For example, dry cement producers have mastered the combustion of not gas or fuel oil in furnaces, but chips from used tires - it turned out to be much cheaper, while the rubber burns completely, even without ash. Recycled worn tires are used to make materials for the construction of high-speed roads; noise barriers; preparing the foundation for new landfills when old ones are closed; used in the arrangement of sports fields and playgrounds, arenas for riding. Projects are being developed to use secondary resources obtained from the disposal of tires for water purification (rubber crumb removes a third of the fluorine and half of the nitrogen contained in it), the restoration of old peatlands and wasted swamps; in the fight against vibration of railway tracks....

In general, in Europe, the evolution of the tire recycling process from 1996 to 2010 led to the fact that the disposal of old tires decreased (in percent) from 49 to 4, the recovery of secondary energy increased from 20 to 40, the recovery of secondary resources from 11 to 38, while the retreading of old heavy-duty tires has dropped from 12 to 9. By the way, Risto Tuominen's company also subsidizes research and development work related to tire recycling and the search for new opportunities for their reuse, including R&D for the project increase the service life of summer tires up to 6.15 years, winter tires - up to 6.37 years, which is beneficial for both the buyer and the recycler.

... But let's get back to Russian realities. The main thing that is alarming is not only that there is again a delay at the government level in the adoption of a new recycling legislation. And not even that the recycling of tires is not solved by a separate law, but together with a long list of other industrial and household waste (the experience of Europe is not a decree for us, we are not interested in the transparency of the process). And the fact that the tire recycling fee intends to accumulate the state itself, which will then issue funds for recycling. And so, we know from experience that the games with this new "tire" tax will be opaque, with various subterfuges and tricks, which our bureaucracy is much more inclined towards. And, of course, there will appear, as we usually do, the notorious corruption component.

And why not adopt -European experience? As they say, clean? Who would answer...

Subscribe to the Avtovzglyad channel:

  • Telegram
  • Yandex. Desen

None

  • Cars
  • Social21 9002 9000 9002 Socium
  • How will the T-14 behave in a fight with Leopard 2

    336838

    • Cars
    • Autoprom

    “Mechanics” again “Rupple”

    334645

    • Cars

    BMW chose China and USA

    300996 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9,000

    Trust, verify and act

    276405

    • traffic police
    • traffic rules

    Amendments to traffic rules will again break the brains of drivers

    2750020

    Do you know how to pass a roundabout?