How long should i charge a new atv battery

How Long To Charge ATV Battery: All You Must Know

No matter how big, strong, and capable your all-terrain vehicle’s battery might be, it still needs a recharge every once in a while. Now, the most popular questions online are “how long to charge ATV battery” and “how can I charge the battery on my own”. Well, that’s exactly why I decided to write this post – to guide you through the process of charging. This isn’t rocket science, but there are still some rules to follow.

Unless you do it properly, you can end up damaging the battery and even the entire powertrain (mostly, the engine). Yep, you heard it right. So, without further ado, let’s get right to it. We’ll start by learning the ideal charging time for ATV batteries and then talk about the actual charging process in more detail, including smart chargers, voltmeters, and more.

Perfect Charging Times

The big question is – are there any ideal charging times for ATV batteries, or not? Here are the facts: a full charge usually takes between three to ten hours. This depends on the battery (how old it is, how well you take care of it) and the charger. If you’ve got a high-grade charger, it will need very little time to recharge the battery. Now, it’s important to understand that a “high-grade” unit isn’t the one that transmits a strong current.

It’s actually the other way around. Say, you’ve got a charger that puts out 2 amps. That device will fully recharge an ATV battery in less than four hours. In contrast, a 5-amp charger will get the job done in 9-10 hours. Some chargers have different operating modes. By switching to the float/drip mode, you can expect the battery to reach a full charge in 4.5-5 hours.

Safety Precautions

The most important thing to remember when dealing with ATV batteries is to make sure you’ve got the right device for charging. I’m talking about voltage, of course. Keep in mind that four-wheeler batteries are pretty fragile. So, if you were wondering – how to charge an ATV battery with car charger – here’s my answer. You shouldn’t really use a regular car charger to “fire up” an ATV battery.

The reason: it usually has a rather high power output (up to 10 amps, or more). That kind of charge will, most likely, cause a quad vehicle’s battery to overheat, which leads to permanent damage and maybe even a malfunction in the engine. Only consider using a car charger if it’s a customizable device that allows limiting the output. If that’s the case, put the threshold/limit at 2-3 amps, and give it a try.

How long do Batteries Last?

Again, this largely depends on the quality of the battery unit and your maintenance routine. If you want to know the average lifespan, it’s 3 to 4 years. There is little point in buying some of the more expensive batteries because their life expectancy won’t be significantly higher compared to the cheaper options. Some experts claim that the more you charge a battery, the less reliable and durable it becomes.

That doesn’t mean you shouldn’t charge it at all, of course. What I would recommend is to constantly check on the charge levels. There are actually pretty clear instructions for this: only consider charging the battery when its voltage drops below 12.4 volts. If it’s higher, there will be little use in “refilling” the charge. I also want to say that the quality of the charger affects the lifespan of the battery as well.

Charging an ATV Battery: Looking for the Right Device

Alright, so, by now, we’ve talked about the right charging times for quad batteries, learned how long the average battery lasts and familiarized ourselves with some safety precautions. We still have one “stop” to make. With the basics out of the way, let’s go ahead and learn how to charge ATV battery. The best way to do this is to invest in a decent-quality smart charger. These are available for 70-80 US dollars and last for many years, if not decades.

The best thing about smart chargers is that they are compatible with a long line of four-wheelers and have wires-connections for pretty much every single ATV battery on the market. Another big pro: most reasonably-priced smart chargers have a built-in system that stops the charging process once the battery reaches a full charge. That prevents it from damaging the battery (yes, overly long charging times are known to cause overheating, among other things).

The less expensive chargers don’t have this feature, and you’ll have to turn them off manually.

Charging an ATV Battery: a Step-by-Step Guide

Don’t worry: there’s nothing hard about using a smart charger. You will, however, need a screwdriver (or, at least, a wrench) to remove the plastic side panel and access the “insides” of your quad vehicle. In some cases, the seat will have to be removed as well. At this point, you’ve got a choice to make: either leave the battery where it is or remove it. I recommend taking it out completely.

That way, it will be much easier to disconnect it from the ATV. This is important: make sure every single wire is disconnected before charging the battery! Next, use the clamps provided with the charger to connect to the battery unit. The positive lead is colored red and should connect to the positive terminal of the ATV battery. The negative lead, in turn, is usually black and is used for grounding.

A clean, bare metallic surface will do just fine. I usually connect the negative to my all-terrain vehicle’s frame. The connectors should always be sparkly-clean – even the tiniest dust particles can cause some trouble. Plus, don’t forget to get a pair of protective gloves and eyewear. The acid inside of batteries is pretty toxic for the human skin.

Once you’re done, disconnect the charger and give the battery a try. I always let it sit for at least a couple of hours before using a voltmeter to measure the charge. If the battery can’t hold the charge properly, chances are, you’re dealing with a dead unit that needs to be replaced.


Ok, that concludes my guide into the world of ATV batteries. If you don’t want to spend big bucks on a new battery or pay a mechanic to charge it, you need to at least know the basics of proper charging. As we learned today, all-terrain-vehicle batteries are pretty fragile and sensitive, which means they need chargers with a specific power output to work correctly. Once you get to know the basics, it will be much easier to do everything on your own.

It’s all about following the rules and using the right equipment and techniques for charging. And if you still have some questions left, don’t hesitate to reach out to me! Or, use the comments section to share your thoughts, tips, and tricks for the less experienced readers. Take care of your ATV, and happy travels!

How long it takes to charge ATV or UTV battery

Charging and maintaining your ATV battery properly is a very important thing you need to do because if you do it incorrectly, you can do a lot of damage to it.

It is important to know how to recharge it properly and to give it the time needed so as not to damage and shorten its life.

Today I will show you all the things you need to know about your ATV battery and how to recharge it properly.

(must read)!!! Before you keep reading 
if you are a beginner ATV rider you must go check out the new book of our site (rxridersplace) The Complete Beginner ATV Rider Guide that will show you step by step all the tools and basics for the Beginner rider (Especially for children(Especially for children) only 6.99 dollars Click here to view

How long does it take to fully charge an ATV battery?

A full charge will take between 3.5 hours to 10 hours however, the charge time varies from battery to battery, and it all depends on the quality of your charger.

For example, a small ATV battery, using a charger that transmits a current of 5 amps, can fully charge in 10 hours.

If you use a 2-amp charger, your battery can be recharged fully within 3.5 hours.

If you use a charger that has a drip or float mode, your charger will roll upstream and it will take a little longer to fully charge your battery, so it may take 4. 5 hours to charge. in addition, if you want to get a very fast charge for your ATV battery I highly recommend this amazing ATV charger that is the best you can find on Amazon that sold this week for sale in a very cheap price. Click here to view.

Also, your ATV battery should not be charged for too long because it can damage its life span. It is very important to read the manufacturer’s instructions and see the recommended recharge time for your battery.

How long do ATV batteries last?

The average life span of an ATV battery is between 3 to 4 years, maybe more in rare cases. It depends on a lot of different factors such as the quality of the battery, the quality of the charge, the level of use and many other factors, which I will introduce to you now.

Battery quality – The life of your ATV battery depends mainly on the type of battery you use. For example, if you use batteries from popular companies like Honda, the battery will be of a good quality and you can expect a long life span.

For example, my friend had the battery model King Quad 300 Yuasa that managed to survive for 9 years, even though it was used many times.

Battery usage – Another factor that greatly affects the battery’s life is how much you use it. In fact, if you use your battery daily or weekly its life will be significantly shortened. On the other hand, if you rarely use your battery, it can last for a very long time.

Temperature – Temperature is a super important factor that significantly affects batteries. If your battery is often used in very cold or very hot weather, it can decompose its acids and internal components, which damages the battery and shortens its life. Because of this, I recommend keeping your battery where the temperatures are not too hot or too cold, a closed room for example.

Also, if you live in a very cold place in the winter, I recommend that you cover your battery with a blanket or towel to help keep it warm. On the other hand, if you live in a place where it is very hot in the summer, I would recommend that you turn on the air conditioner at an average temperature to help keep the battery cool.

Charger quality – If you use a cheap and low-quality charger, you can definitely shorten your battery life very quickly. In fact, the best charger to use is the original one that came with your battery when you bought it because it is already compatible with its components.

It’s very important that you pay attention to each of these factors to help ensure your battery has a long life.

Tips to make your ATV battery last longer!

If you want to maintain and extend the life of your ATV battery, these are some of the things you can do.

Clean your battery

Cleaning your ATV battery can significantly help and impact its lifespan.

To clean your ATV battery, you need to make sure the terminals are clean. Dirty terminals could damage your battery and significantly shorten its life.

Keep it warm

As I said earlier in the post, temperature is one of the factors that most damages the life of your ATV battery.

Cold temperatures are significantly more damaging to battery life than hot temperatures. Also, a cold battery can deplete your engine’s energy and make it even worse for your ATV engine’s life.

To help keep your battery safe from the cold, I highly recommend you put it in a warm garage or even in a plastic or rubber protector to keep it warm.

Keep it fully charged

Keeping your battery fully charged can significantly extend its life expectancy.

Also, I recommend that you take a portable charger with you when you ride your ATV so that you can charge it while riding. That way you will be able to keep the battery charged.

In addition, it is very important to be careful not to overcharge it so that you don’t overheat the battery, which can damage it.

How to know if your ATV battery needs changing

If you do not know if you need to replace your ATV battery, this is your lucky day. I will give you a few examples to help you know if your battery needs replacing.

  • The ATV does not start, and the lights do not work – the simplest way you can know if your battery needs replacing is if you start your ATV and you see that the lights do not work or if your ATV doesn’t even start. This means you have to replace the battery.
  • Strange noises from the engine – another sign that can tell you if your battery needs replacing is when you hear strange noises from the engine. Also, if there are some strange noises from the engine while riding, it can indicate that there is a problem with the battery.
  • The battery is not charging – this is one of the simplest ways you can know if your battery needs replacing. If you notice that your battery is not charging, it might mean that it needs replacing. However, it may just be that your battery is not charging because of a bad charger. Try recharging the battery with another charger to be sure if it really needs replacing.


To summarize today, I have shown you all the things you need to know about charging your ATV and UTV battery.

If you want to know how to recharge your ATV or UTV battery properly, I highly recommend you go and read the post I wrote on the topic. Click here to view.

Thanks for riding. Until next time.

how to properly charge, how long does it take to charge an ATV for children

Electric ATVs are rapidly gaining popularity due to their efficiency and environmental friendliness. But many riders still do not know how to charge an ATV on a battery. Improper charging reduces the battery life or the battery loses its capacity quickly. Therefore, let's figure out how to charge a children's ATV and consider the key recommendations of experts.

ATV charging methods

There are two ways to recharge the ATV battery. The first and easiest is to connect the charger to the appropriate connector. All electric cars and scooters are charged in a similar way, although not all quadrics have a similar socket.

If the ATV does not have a charging port, the rider will have to connect the battery directly to the charging station. To do this, you need:

  • Determine the appropriate current value.
  • Disconnect and remove the battery. nine0014
  • Connect the terminals of the device to the battery.
  • Set charging current controller to minimum.
  • Enable automatic mode on the device.
  • Plug the charger into a socket.
  • Select the appropriate charging current for the battery.

It is important to note that lithium batteries have a charge control board. This means that after a full charge, the process stops. Although overcharging the battery is still not recommended. nine0003

Another important question many riders are wondering is how to charge an ATV battery with an in-car charger. Yes, such a procedure is possible, but you need to properly configure the charger. For recharging, you can only use devices with adjustable charging current and the ability to set its minimum level (0.5-0.7 A).

Important : The optimal current for charging the battery is 1/10 of the battery capacity (in Amps).

How long does it take to charge an ATV battery? nine0005

Each vehicle's user manual lists the optimum battery charging time. On average, this figure is 6-12 hours. The charging time depends on the generation of the battery, its capacity and the characteristics of the charger. Don't forget to charge the battery, though. If the battery has 30-40% capacity left, the recharging time should be reduced.

But what if you don't know how long to charge your ATV battery? In this case, you need to almost completely discharge the battery and charge it for 8 hours. After that, the battery should be installed on the quadric, and the charge level should be assessed. If the indicator shows 100%, next time you need to charge the battery for 6-7 hours. In this way, you can determine the optimal recharging time. nine0003

Also remember that overcharging is the main enemy of batteries. It is strongly not recommended to leave the battery connected to the network for 15-20 hours. This leads to a decrease in battery capacity and, accordingly, a decrease in the operating time of the quadric.

Knowing how long it takes to charge an ATV, you can make a schedule for recharging it. For example, the battery can be connected to the network in the evening or after each trip. You can also purchase a replacement battery, thereby increasing the riding time on the ATV. nine0003

Key recommendations for battery charging and maintenance

The battery of any electrical equipment must be properly maintained. Violation of the recommendations may lead to a decrease in battery capacity or damage to it. To avoid such problems, it is recommended:

  • Do not recharge the battery.
  • Do not fully discharge the battery (to 0).
  • Store the battery only in a warm and dry place.
  • Run in a new battery.
  • nine0013 Charge the battery with a suitable device.
  • Periodically charge the battery if the equipment is idle for a long time.
  • Give the battery time to equalize the temperature if it has been exposed to the sun or frost for a long time.

Separately, it is worth mentioning the "buildup" of the battery. Immediately after purchasing the equipment, you will need to fully charge and charge the ATV several times (2-3 times).

How to properly charge the ATV battery before storage? nine0005

Most riders store their bikes before winter. And in order for the device to be ready for operation in the spring, it must be properly preserved. Preparing an electric quad bike for wintering is quite simple, you just need to find a warm and dry place to store the quad.

Another important conservation point is battery preparation. Before wintering you need:

  • Fully recharge the battery (up to 100%).
  • Slightly reduce the charge level (it is not recommended to store a fully discharged or fully charged battery). To do this, you can ride a quadric for 10-15 minutes. nine0014
  • Remove the battery from the vehicle. It is best to store the battery at home, in a warm and dry place.
  • Recharge the battery every 1-1.5 months. You do not need to perform a full charge cycle, 4-5 hours will be enough.

Note : If you leave the quad battery in the cold, the battery will simply "leak" and stop working.

11/16/2020 8183

How to properly charge your ATV battery

Buying a children's ATV or its adult counterpart is not just about being a rider. This technique requires special attention. As a rule, the owners of this motorcycle often do not pay enough attention to charging the battery, which can cause it to fail almost every season. Remember, if you charge your ATV battery correctly, it will last you many times longer.

To avoid premature battery failure and reduced capacity, follow these guidelines:

  • do not recharge the ATV battery;
  • do not bring the vehicle to a complete discharge of the battery;
  • only a warm room with a low level of air humidity is suitable for storing the battery;
  • charge the battery regularly while the ATV is idle;
  • use a suitable charger;
  • let the battery recover after a long exposure to the sun or frost. nine0014

Always follow the connection diagram when installing the battery in the ATV. You need to start by connecting the positive terminal. Be careful not to reverse the polarity as this can cause both the fuse to blow and the battery to explode.

Why was the charge on the Stealth ATV gone?

If the vehicle battery suddenly stops charging, there may be several reasons for this:

  • ATV battery is damaged; nine0014
  • charging burned out;
  • the relay-regulator has broken;
  • The generator is not working.

The first signs of regulator relay failure are when the ATV battery starts to drain too quickly. Diagnosis of such a breakdown is carried out by measuring the resistance with a voltmeter at the battery terminals. Repairing any electrical equipment of an ATV is a rather complicated process that a true professional should perform.

Often the best solution when a battery or regulator fails is to replace it with a new one. It is much easier to prevent this kind of breakdown than to fix it later. That is why it is necessary to charge the battery of motor vehicles in strict accordance with the requirements of the manufacturer.

How to properly charge a children's ATV?

There are two ways to charge the child's ATV battery with the charger. The easiest of them is to connect the charger to the appropriate connector on the motorcycle. True, such a nest is not available on all models of ATVs. If there is no such connector, then the battery should be connected directly to the charger. The battery is charged as follows:

  • determine the correct amperage for your ATV battery;
  • disconnect and remove the battery from the vehicle;
  • connect the charger terminals to the battery;
  • set the current level to minimum;
  • activate auto mode on the device;
  • Plug the charger into an outlet.

Lithium ATV batteries usually have a board that monitors the battery level. But even in this case, it is strongly not recommended to charge the device longer than necessary. nine0003

How do I charge an ATV gel battery?

Each ATV gel battery manufacturer provides detailed charging instructions. It is very important to choose the right charger with the ability to adjust the amperage in order to avoid overcharging the battery. On sale you can find specialized chargers for ATV gel batteries.

It is necessary to charge such a battery as follows: