How to change spare tire on toyota sienna


Toyota Sienna 2010-2022 Owners Manual: Replacing a flat tire - If you have a flat tire (vehicles with a compact spare tire) - Steps to take in an emergency

Toyota Sienna 2010-2022 Owners Manual: Replacing a flat tire - If you have a flat tire (vehicles with a compact spare tire) - Steps to take in an emergency - When trouble arises
  • Manuals
  • New
  • Top
  • Sitemap
  • Contacts
  • Search

Toyota Sienna 2010-2022 Owners Manual / When trouble arises / Steps to take in an emergency / If you have a flat tire (vehicles with a compact spare tire) / Replacing a flat tire


  1. Chock the tires.


  1. Slightly loosen the wheel nuts (one turn).


  1. Turn the tire jack portion A by hand until the notch of the jack is in contact with the jack point.

    The jack point guides are located on the side of rocker moulding.

    They indicate the jack point positions.


  1. Raise the vehicle until the tire is slightly raised off the ground.


  1. Remove all the wheel nuts and the tire.

    When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.

WARNING

Replacing a flat tire

  • Do not touch the disc wheels or the area around the brakes immediately after the vehicle has been driven.

    After the vehicle has been driven the disc wheels and the area around the brakes will be extremely hot. Touching these areas with hands, feet or other body parts while changing a tire, etc. may result in burns.

  • Remove the spare tire before jacking up the vehicle. If the spare tire is removed after jacking up the vehicle, the tire carrier and the spare tire may interfere with the jack and cause a serious accident.
  • Failure to follow these precautions could cause the wheel nuts to loosen and the tire to fall off, resulting on death or serious injury.
  • Have the wheel nuts tightened with a torque wrench to 76 ft•lbf (103 N•m, 10.5 kgf•m) as soon as possible after changing wheels.
  • When installing a tire, only use wheel nuts that have been specifically designed for that wheel.
  • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer.
  • When installing the wheel nuts, be sure to install them with the tapered end facing inward.
  • For vehicles with power sliding door and/or power back door: In cases such as when replacing tires, make sure to turn off the power sliding door main switch and/or the power back door main switch . Failure to do so may cause the sliding door and/or the back door to operate unintentionally if the power sliding door switch and/or the power back door switch is accidentally touched, resulting in hands and fingers being caught and injured.
    Taking out the spare tire

    Slide the front passenger’s seat to the frontmost lock position and the right side second seat to the rearmost lock position so they will not interfere with the jack handle. Open the ri ...

    Installing the spare tire

    Remove any dirt or foreign matter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing ...

    Other materials:

    On-vehicle inspection
    1. INSPECT STEERING PAD (VEHICLE NOT INVOLVED IN COLLISION) Perform a diagnostic system check. With the steering pad installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad with a new one: Cuts, minute cracks or marked ...

    Concept, General information, Safety information
    Concept The system can help prevent accidents involving pedestrians and cyclists. In the event of an accident, the system may reduce impact speed. The system sounds a warning in the city speed range before an imminent collision and activates brakes independently, if needed. General information The ...

    Check component status
    (a) Compare the test value with the minimum test limit (MIN LIMIT) and maximum test limit (MAX LIMIT). (b) If the test value is between the minimum test limit and maximum test limit, the component is functioning normally. If not, the component is malfunctioning. The test value is usually sign ...

    © 2011-2022 Copyright www.tsienna.net

     

    Toyota Sienna 2010-2022 Owners Manual: Taking out the spare tire - If you have a flat tire (vehicles with a compact spare tire) - Steps to take in an emergency

    Toyota Sienna 2010-2022 Owners Manual: Taking out the spare tire - If you have a flat tire (vehicles with a compact spare tire) - Steps to take in an emergency - When trouble arises
    • Manuals
    • New
    • Top
    • Sitemap
    • Contacts
    • Search

    Toyota Sienna 2010-2022 Owners Manual / When trouble arises / Steps to take in an emergency / If you have a flat tire (vehicles with a compact spare tire) / Taking out the spare tire


    1. Slide the front passenger’s seat to the frontmost lock position and the right side second seat to the rearmost lock position so they will not interfere with the jack handle.
    2. Open the right side sliding door and you will find the flap on the floor. Pull back the flap to find the spare tire clamp bolt.


    1. Attach the adapter socket over the spare tire clamp bolt.

      Connect the jack handle and the adapter socket. Turn the jack handle.

      The tire will be lowered completely to the ground.


    1. Take the spare tire out from underneath the vehicle and remove the holding bracket.
    WARNING

    When storing the compact spare tire

    Be careful not to catch fingers or other body parts between the compact spare tire and the body of the vehicle.

      Taking out the jack and tools

      Remove the cover. Remove the adapter socket. Remove the jack. Remove the wheel nut wrench. ...

      Replacing a flat tire

      Chock the tires. Slightly loosen the wheel nuts (one turn). Turn the tire jack portion A by hand until the notch of the jack is in contact with the jack point. T ...

      Other materials:

      Overview
      Button in the vehicle Intelligent Safety Radar sensors The radar sensors are located in the rear bumper. Always keep the bumper in the area of the radar sensors clean and unobstructed. Switching on/off Switching on automatically Blind spot collision warning is automatically activated after depart ...

      Side Airbag Sensor Assembly LH Circuit Malfunction
      DTC B1141/33 Side Airbag Sensor Assembly LH Circuit Malfunction DESCRIPTION The side airbag sensor LH circuit consists of the center airbag sensor assembly and side airbag sensor LH. If the center airbag sensor assembly receives signals from the side airbag sensor LH, it judges whether or ...

      Installation
      1. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER (a) Install a new bearing spacer. 2. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING (a) Install the tapered roller bearing. 3. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER (a) Install the oil slinger, as shown in the i ...

      © 2011-2022 Copyright www.tsienna.net

       

      How to remove a disc from a Toyota Sienna?

      In this article we will try to help you solve all the problems that you may encounter with the wheels of your car. And, basically, how to remove a car rim? If you want to change your flat wheel or tires, you will find all the information you need on this page. To do this, we will first see how to remove the tire from the car rim, and then, in the second step, how to remove the stuck rim of the car , then how to remove the flat rim from place to put the spare tire, and finally, how to unlock the jammed rim nuts .

      How do I remove a tire from a rim from my car?

      So we start our article by explaining how to change a car tire. You may have made a good deal by buying your tires online, but it's quite difficult to find mechanics who will agree to install tires bought elsewhere than at home on your car's rims. Therefore, the question of the desire to install them yourself is more than legitimate.

      It is technically possible with a lot of force and a crowbar to change the tires of your car yourself, however, even if you manage to remove both sidewalls of the tire, loosen it and reinstall a new tire, you will not be able to balance the tire without a special machine, and without it your tires will wear out prematurely . Keep in mind that very often installation and balancing costs only about twenty euros. If you want to buy tires online at a discounted price, please note that many sellers offer free installation at a partner car center.

      How do I remove a rim stuck to the hub on my car?

      Now we move on to the part that you are certainly most interested in, namely, how to remove the car rim stuck to the hub, or rather, a rather classic case of a rim that has not been removed for a long time and which, due to rust stuck to your wheel hub. Indeed, many motorists find themselves in this situation and do not know what to do. This can be especially frustrating if you have a flat tire and need to change the rim on your car. Here are the various solutions available to you:

      • If you have something on hand, after jacking up the car and, if possible, on the spark plugs, and then removing the nuts from the rim, use an anti-seize agent that you inject into the holes of the nuts and let it work for about ten minutes . . After that, try removing the rim from your car again.
      • Use force: although this is rarely the best solution, in this case you are faced with hard objects that are not much of a risk, and with a hammer and a wooden wedge you can hit the edge of your car's rim and this should unlock it and allow you to remove .
      • Baste the joint between the rim of the anti-corrosion sleeve and wait a few hours before trying to unlock it again.

      How do I remove the rim from my car to replace a punctured tire with a spare?

      Now we are going to explain to you the most classic procedure, but which no one knows about, how to remove the rim from its place if you have a punctured wheel and want to replace it with a spare tire? This procedure is simple, here are a few steps to follow:

      • Stay away from traffic so you don't endanger yourself.
      • Park the vehicle on a level surface.
      • Apply the parking brake and shift into first gear.
      • If you don't know where your car's jack is, feel free to refer to our article to help you find it.
      • Before lifting the vehicle, loosen the rim nuts so that you do not have to force the transmission after lifting.
      • Jack up the car and finish removing the car rim nuts.
      • Remove the flat rim from the machine.
      • Put on the spare wheel, install the nuts, tighten them all by hand, balanced, before starting the car again.
      • Complete the nuts with a socket wrench.

      How do I remove stuck nuts from my car's rim?

      Finally, it may happen that in order to remove the rim of your car, you have to deal with jammed nuts. In this case, you will have more or less the same solutions for the case of rim sticking to the wheel hub. The best solution would be to use Rust Protection Grease or Rust Protection Grease and let it run for several tens of minutes before loosening the nuts. Another possibility, try to find, some are battery powered stun wrenches, they create much more torque than your hand plus a socket wrench and will help you loosen the nuts.

      If you have any further questions about the Toyota Sienna, do not hesitate to contact us. Toyota Sienna category.

      How to change a Toyota Sienna wheel. We repair and repair


      How to Replace Wheel Bearing & Hub 91-02 Ford Escort


      Steering wheel (steering wheel) UAZ Patriot (UAZ Pickup)


      Wheel painting Renault Megane 3, R17

      e-Nissan
    Evalia Crash Test Euro NCAP


    2019 VW Multivan T6 2.0TDI | Review


    VAZ for ram bumper


    2019 Toyota Sienna LE AWD (All-Wheel Drive) - review of features and full walk around


    So You Want a Nissan 370z


    2019 Nissan Almera 1. 5E - Exterior & Interior Review (Philippines)


    Old School Cool: 1978 Toyota Century (VG35)

    4 wheel nuts 98 Faridun ... year of manufacture 2001, rear-wheel drive and 3s-fe engine ... depends on the configuration or what?

    Vage

    I love Lincoln! your car is just a dream!

    Peter Alybetsky

    Which stamped wheels are better - DK, Steel Steger or Kremenchug?

    Isroie

    3.7 on simple tires ... on sliks 1.2 ??? Woodpeckers

    Alevtina

    Bauyrym Kasyna Baryp Bagasyn Tusirshi Cormiegesin Ayyypka Buyyrma

    9000

    men, one of the cross -country cross -country criteria is a passage of passability lightening its weight, not making it heavier. I think instead of 1850 kg he now weighs at least 2500. This is a huge minus!!!

    Muslim

    put a powerful diesel in a loaf!

    Nurtai

    . .. Muscovite collective farm ...

    Denis

    puller for weaklings

    Albay

    First you need to distinguish the radius from the diameter :)

    Daniyal

    who at what if?

    Malyshek Rasul

    Piece of iron had to be installed... This tool is needed for calipers with electronic handbrake

    Medford

    successfully confused land with sea, if the obvious is so visible and so confused, is it worth believing the rest?

    Garrett

    Pasha, I really like your work!! Keep going, very interesting.

    Dato

    Berlingo, no questions at all...!!

    Ain

    And with a dynamometer he stretched the nut, as it should be! But our collective farmers, they tighten the nut with the help of a pipe and they don’t care, and that’s why they change bearings every year, monkeys!

    Bin Veliskin

    it is not necessary to teach schoolchildren the wrong way, because they will grow up, become bloggers and will carry this nonsense to the masses.

    Ara

    your videos are great, shoot, tell, interesting , at least from what I dream of America. I advise you Alex to watch the film Lincoln for a lawyer there was such a 9Ilgizar

    How to throw a weapon

    Tomik

    Woomer is cool on these slippers

    Eisen

    Once in your life there was a diesel German ... go to f ... th with a reliable and proven diesel fuel, only gasoline.

    Risi Kurichenkov

    You need a double motorhome on wheels, hooked on the hitch and housing is always behind you. Thanks for the video, everything is very interesting. Good luck!

    Garnet

    Thank you! And you do not know if you can set the tweeter to a different speed !?

    Parviz

    Excellent?! But the bouquet is not complete without Nokian

    Islam

    Bolts are lubricated and those who think that they will unscrew are deeply mistaken.


    Learn more