Your Tire Pressure Monitoring System is a valuable tool, but only if you pay attention when the Honda TPMS Warning Light comes on. When the tire light alerts you to low tire pressure – you will need to address the problem and reset the light.
Please remember that the tire pressure sensors are not a substitute for checking your tire pressure regularly. It won’t light up unless the problem is becoming serious. Underinflated tires can be a safety hazard.
Honda Tire Pressure Monitoring Systems vary, depending on the model type and model year. Furthermore, TPMS systems are not uniform across the spectrum of car brands.
In addition, the technology changes from time to time, meaning that older models may not have the same capability found on new ones. Here’s some good information that may answer some of your questions about TPMS and your tire warning light.
The tire pressure light isn’t required to come on until the tire is 25 percent below recommendations. Therefore, you should never ignore it. The manufacturer’s recommended air pressure is in your owner s manual.
The most likely trigger is cold. Tire pressure drops about 1 psi with every ten degree drop in cold weather. As your tires heat up, the pressure stabilizes. That’s why there are winter and summer standards for properly inflated tires.
Try driving the vehicle at over 28 miles per hour for a few minutes. At that speed, the TPMS will get little or less interference from other sensors and radio frequencies. This allows it to update through the serial data bus, sending the proper tire information to the TPMS sensor.
According to the National Highway Traffic Safety Administration, systems may flash or stay on longer to indicate a problem with the TPMS system rather than the tire.
After checking that your tires have the proper pressure, you may need a mechanic to read the code and tell you what’s happening.
The spare tire does not have a sensor for the TPMS system to read. The system may register nothing where the tire should be. As long as you are confident that the spare has the correct tire pressure, it should not represent a problem.
Unfortunately, human eyesight cannot detect that a tire is low until the problem is really severe. . Your manufacturer’s recommended pressure is in your owner s manual.
Some people try to clear codes by disconnecting the battery. Generally the system saves all codes and doesn’t reset them just because the battery is removed. This is actually a fail-safe feature because mechanics need those codes to determine what is wrong with a vehicle.
If you are able to clear the TPMS code, you will be overwriting it with a new code.
Unless the system triggers the sensor again, your mechanic will not find the important code.
According to the automotive journalists at Edmunds, a mere 5 PSI can cause a tire to fail. An underinflated tire generates heat as it struggles to keep up with the job it has to do. This causes faster degeneration.
Furthermore, an underinflated tire affects the accuracy of steering and handling. Thus, the vehicle declines in performance and fuel economy.
Direct TPM sensors are attached to the valve for the most accurate reading. With indirect TPMS, the anti-lock brake system assists in determining approximate pressure. Although a good system, it is not as fast as a direct system.
Starting with the 2008 model year, every Honda has TPMS. All cars made before the 2018 probably don’t have this feature.
If you don’t have a light to turn on and warning you, it’s all the more important to carry a gauge to check and add air as needed.
Explore the Earnhardt Honda inventory today to find a Honda car, truck or crossover with TPMS!
Learn how to reset the tire warning light with this step-by-step guide and get back to normal. Instructions To Reset the Honda TPMS Warning Light
Posted in Features, Model Information, Service, Tips and Tricks | No Comments »
This guide explains how to reset the tyre pressure monitoring system for the Honda CR-V fourth generation (Mk 4, 2012 – 2016) and the current fifth generation (Mk 5, 2017 – present).
The tyre pressure monitoring system (TPMS) requires resetting, or ‘recalibrating’ each time:
To allow calibration to take place, before resetting the TPMS:
Use this guide to reset the tyre pressure monitoring system for the Honda CR-V forth generation, Mk 4, 2012 – 2016.
The tyre reset calibration process now takes place automatically and requires approximately 30 minutes of cumulative driving at speeds between 25−62 mph (40−100 km/h).
For models with colour audio system, use this guide to reset the tyre pressure monitoring system for the Honda CR-V fifth generation, Mk 5, 2017 – present. The TPMS can be reset from the customised feature on the driver information interface.
If the ‘Failed’ message appears, repeat steps 4 and 5. The tyre pressure monitoring system will automatically be reset and calibrated after around 30 minutes of driving at speeds between 25 to 62 mph (40 to 100 km/h).
For models with Display Audio system, use this guide to reset the tyre pressure monitoring system for the Honda CR-V fifth generation, Mk 5, 2017 – present. The TPMS can be reset from the customised feature on the audio information screen.
If the ‘Failed’ message appears, repeat steps 4 and 5. The tyre pressure monitoring system will automatically be reset and calibrated after around 30 minutes of driving at speeds between 25 to 62 mph (40 to 100 km/h).
Select other helpful guides for your Honda CR-V.
You are the proud owner of a recent car, the benefits of tactile devices, integrated technologies should bring you the convenience of using your Honda CR V, which is important because the technology is talking about electronic, and as we all unfortunately know quite often that problems, to fix it.
Today we will focus on the tire pressure sensor and specifically on how to reset the tire pressure sensor on the Honda CR V so that this indicator never appears on the dashboard again. To do this, we will divide our article into two parts: first we will focus on the typical circumstances when the tire pressure indicator appears and the procedure to follow, and then on the fact that the tire indicator remains on even when inflated. tires so how to reset this tire pressure sensor on Honda CR V.
First, we will look at the typical methodology for resetting a tire sensor on a Honda CR V, which, if it lights up, is the basic simple steps:
Now that you have completed the basic procedure for removing the tire pressure sensor on the Honda CR V and that didn't work, we'll move on to the second solution, which is, the tires on my Honda CR V are well inflated and I still want that light to go out.
This probably means you have Faulty tire pressure sensor. This trouble will require to reset the value on your car's dashboard. However, be careful not to do this while driving as pressure fluctuations will interfere with the pressure sensors. In most cases, you need to look at the vehicle's configurations, then you should look for an option to detect inflation or "deflate detection". While on this tab, you must hold the select button or reset button depending on the year of your Honda CR V until you see a message on the car console confirming that the reset has been taken into account (usually takes a few seconds). You can now turn off the ignition and restart your Honda CR V to see if the tire pressure indicator has gone out.
the garage is probably the Tire pressure sensor on the valve that is defective or faulty on your Honda CR V .
Keep in mind that usually the unit price is around 120 euros. Another solution that some choose to take as the issue may recur in some series is to disable the sensors with your carrier and diagnose your vehicle. However, this method is not recommended as it can result in mishandling and malfunctioning of your Honda CR V. You now have all the keys in your hands to know how to reset the tire pressure sensor on your Honda CR V.0005
If you have any further questions about the Honda CR V, do not hesitate to contact us. Honda KR B category.
| DIY
| |||
Honda CR-V - Video Lesson Model: Honda CR-V MK 4 - Years 2012-2017 In this video tutorial, we will see how to reset the tire pressure warning light on a 2012 Honda CR-V by following these simple and quick steps; Before performing this operation, any problem related to pressure changes in one or more tires must be resolved. Then we get into the car and turn on the ignition; now press the button indicated on the steering wheel to scroll the instrument panel menu to the tire pressure item as shown in the video. Published on 20 December 2021 by ScegliAuto | How to remove the airbag on the steering wheel Dodge Journey? How to disassemble the Dodge Journey steering wheel airbag? We see in this video how to proceed. Before disassembling the steering wheel of the car, disconnect the battery terminals located in the engine compartment. Remove the control plugs at the rear of the steering wheel, then use a socket wrench to unscrew the airbag mounting pins. After the driver's airbag has been released, disconnect the power terminals and remove it from the steering wheel. To assemble the airbag: connect the power terminals, then press them on the steering wheel with your hand and screw in the rear pins at the same time.  |
We can only confirm the reset of the tire pressure indicator by watching the video to the end! 
