How to find tire size on truck


How to Read & Determine Tire Size for Your Vehicle

Home > Company > Tire Safety > Choosing Tires > Determining Tire Size

How To Determine Tire Size

Once you have determined it’s time to buy tires, you’ll need to know what size tires are correct for your vehicle. Depending on what you drive, you may be interested in how to find the right tire for your…  

  • Sedans or CUV
  • Light Trucks or SUV
  • Motorcycle
  • RV

This information is usually inside your car’s doorjamb, in your owner’s manual. To ensure your current tire or a replacement tire you may be looking at matches your vehicle’s requirements, it will be good for you to understand how tire sizing works. You may have never paid attention to the string of numbers and letters on every tire, but it’s a gold mine of information.

If you’re unsure of how to read tire measurements from your tire walls, the information and graphics below will tell you how to read tire size, understand and interpret it. If you decide you want to substitute a new size or tire type, consult an authorized tire retailer who can expertly advise you, because many optional tire sizes may have different load capacities and could require wheels of a different rim width or diameter and different inflation pressure.

Not sure you need new tires? Our Tire Replacement Guidance article will help you determine whether it’s time to retire your tires.

Metric Sizing

Most passenger cars, SUVs and light pickups (1/2 ton and smaller) will come with tires that are either P-Metric or Euro-Metric. For P-Metric tires, you’ll see the letter “P” before the number sequence begins: P225/70R16 97H. P-metric is a designation standardized by the Tire and Rim Association for a “passenger car” tire type. For Euro-Metric there will be no preceding letter before the number sequence begins: 225/70R16 98H. Euro-Metric is a designation standardized by the European Tyre and Rim Technical Organization for a “passenger car” tire type.  Both P-Metric and Euro-Metric size tires are designed to primarily be used on passenger vehicles, which can include cars, minivans, SUVs, and other light duty pickup trucks.

If your vehicle is an SUV, Pickup truck or van, you might see a different type of size designation on your placard that is specific for heavy duty light trucks and vans, especially common on ¾ ton and larger pickup trucks and vans. There are two common size types in this category, LT-Metric and Euro-Metric Commercial (aka C-type). Both size types are metric and so use the same structure as P-Metric and Euro-Metric but have some different characters in the size that differentiate them from their passenger car cousins. LT-Metric tires will have the letters “LT” before the size number sequence: LT245/75R17 119/116R Load Range E. Notice that there are two load index numbers and a Load Range, see the section on Load Index for more info.  LT-Metric is a designation standardized by the Tire and Rim Association for a “light truck” type tire. Euro-Metric Commercial or C-Type tires will look very similar to a passenger Euro-Metric size except that there will be a “C” right after the rim size: 23/65R16C 121/119R. Notice that the C-type tires also have two load index numbers. Euro-Metric Commercial, or C-Type is a designation standardized by the European Tyre and Rim Technical Organization for a light truck type tire. Light truck tires are designed to be used on vehicles capable of carrying heavy cargo and are usually only specified by a vehicle manufacturer on vehicles exceeding a certain load capacity.

Other types of tires that fall into the Metric sizing type are Temporary Spares, they start with “T”. If you see a size that starts with “ST,” that means “special trailer” and is only for use on a trailer.

Regardless of whether you are looking at a P-Metric, Euro-Metric, LT-Metric, Euro-Metric Commercial, T or ST tire the numbers in the size mean the same thing.

Width

The first number to appear in your tire size information is the width, in millimeters, of the correct tires for your vehicle: P225/70R16 91S.

Tire width always refers to the measurement from one sidewall to another. Thus, a tire with the measurement “P225” is for a passenger vehicle and has a nominal width of 225 millimeters.

Aspect Ratio

After the slash mark, the next number you see is for the tire’s aspect ratio, which essentially tells you how tall your tire’s profile is: P225/70R16 91S. Aspect ratios are delivered in percentages. Tire makers calculate the aspect ratio by dividing a tire’s height off the rim by its width. If a tire has an aspect ratio of 70, it means the tire’s height is 70% of its width.

Lower aspect ratio tires, such as a 60 series, generally offer vehicle handling performance advantages over higher aspect ratio tires, such as a 75 series, but a typical trade off can be ride harshness.

Construction

After the aspect ratio comes a letter that indicates the type of internal construction maintaining your tire’s stability: P225/70R16 91S.

There are two types of construction that you may see on the sidewall of a tire:

  • R – Radial
  • D or “B” or “-“ – Diagonal or Bias Ply

Radial tires are the most common tires on the road in the United States today; thus “R” will usually be shown in the tire size designation. Radial construction means the tire’s internal ply cords are oriented in a radial direction, from one bead over to the other, essentially perpendicular to the direction of rotation. You may also occasionally see RF indicating a run flat tire or ZR indicating a tire that is a speed rating higher than V.

Rim Diameter

The next number is the diameter code, in inches, of the rim onto which the tire can be mounted. For example, a tire with the P225/70R16 91S would fit a rim with a 16-inch diameter.

Load Index

Load index can be a confusing subject because there are so many different caveats, but we will try to explain everything here.

The next figure after the rim size in the sequence is your tire’s load index, which tells us how much weight, in pounds, the tire can support when fully inflated: P225/70R16 91S

We call it the load “index” because the number doesn’t tell us the precise number of pounds the tire can carry, at least not by itself. However, the number does correspond to a specific load capacity listed in an index. Beginning with 1 and ending with 150, numbers in the load index represent carrying capacities of 99 to 7385 lbs.

There are two types of load types for passenger tires though, Standard Load and Extra Load. If a tire is Standard Load there will be no markings indicating it but if it is Extra Load the letters XL will appear after the size and load index.

Standard Load Euro-Metric: 215/55R17 94V

Extra Load Euro-Metric: 215/55R17 98V XL

Passenger car tires like P-Metric and Euro-Metric will only have one load index number where LT-Metric and Euro-Metric Commercial (C-Type) will have two numbers separated by a slash. The first number is the load index if the tire is used in a single application, the second number is the load index if the tire is used in a dual application. Passenger type tires cannot be used in a dual application. Light truck tires will also have a Load Range that is indicated by a letter, such as Load Range E. Load Range is an older term that is still commonly used in the industry so you may hear your tire dealer reference it but the load index numbers are the best way to ensure you have the proper tire.

One important but often misunderstood facet about load index is that the load index numbers between standards organizations (P-Metric vs Euro-Metric) are not necessarily on the same scale. Meaning that two tires in the two different systems that have the same load index number could have different maximum load capacities. This is why it’s important to not only look at the load index number but also verify the actual load capacity.

Speed Rating

The final figure in a tire size sequence is the speed rating, which is indicated by a letter: P225/70R16 91S. Just as your load index number corresponds to a specific load, your speed rating letter corresponds to a particular speed capability based on a standardized laboratory test.

For example, a tire with speed rating “S” is rated for up to 112 mph, while a tire rated “R” is up to 106 mph. Remember that this isn’t a recommended cruising speed. Of course, you should always follow legal speed limits on roadways.

Replacement tires must have the same or higher speed rating as the vehicle’s Original Equipment to maintain vehicle speed capability. If a vehicle has tires with different speed ratings, it is the speed rating of the “slowest” tire that dictates the vehicle top speed.

Flotation Sizing

There is one last sizing type that you should know about, especially if you are in the market for off road tires for a light truck or SUV. It’s called a Flotation size and the numbers in this sizing format are very different from the Metric formats. Flotation sized tires are similar to LT-Metric tires in application except for a few important points. Number one, they cannot be used in dual applications and number two, an equivalent size tire may have different load capacity than its LT-Metric counterpart.

Overall Diameter

The first number in the Flotation tire size is the overall diameter in inches. Pretty straight forward.

Section Width

The second number is the section width (sidewall to sidewall) measurement in inches. Again, fairly simple.

Construction

After the section width comes a letter that indicates the type of internal construction: 33X12.50R17LT 120Q.

This is the same as is found in the metric sizing systems.

There are two types of construction that you may see on the sidewall of a tire:

  • R – Radial
  • D or “B” or “-“ – Diagonal or Bias Ply

Radial tires are the most common tires on the road in the United States today; thus “R” will usually be shown in the tire size designation. Radial construction means the tire’s internal ply cords are oriented in a radial direction, from one bead over to the other, essentially perpendicular to the direction of rotation.

Rim Diameter

The next number is the diameter code, in inches, of the rim onto which the tire can be mounted. For example, a tire with the 33X12.50R17LT 120Q would fit a rim with a 17-inch diameter.

LT type

The letters LT will be after the Rim Diameter indicating that this tire type is intended for Light Truck vehicles similar to the LT-Metric and Euro-Metric Commercial (C-Type) tires.

Load Index and Speed Rating

Load Index and Speed Rating have the same meaning and format as the tires using the metric sizing system. Note that since flotation tires cannot be used in a dual application there will be only one load index number instead of two.  

Uniform Tire Quality Grading

Another group of stamping on certain types of tires is the Uniform Tire Quality Grading or UTQG. This grading and stamping is required for passenger car tires (i.e. P-metric and Euro-metric) in the all season and summer categories. Dedicated winter tires, Light Truck (LT-Metric, Euro-Metric Commercial, Flotation) and Motorcycle tires are excluded from this requirement.

Quality grading is designed to make the tire purchase decision easier for you. Ideally, the system is intended to provide simple, comparative data so you can make an intelligent buying decision. However, the ratings are based upon test results achieved under special conditions. This means it’s possible to misinterpret the comparative data as it relates to your individual driving habits, conditions, etc. You should still rely on your service or tire professional for assistance. 

Quality grading designates the comparative performance levels of a tire based on government-specified tests but commissioned by the individual tire manufacturers. All tire manufacturers are required to grade regular and all-season passenger tires in three categories:

UTQG

  1. Treadwear
  2. Traction 
  3. Temperature

Treadwear
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course for 6,000 miles (9,600 km). For example, a tire graded 150 would wear one and a half times as well on the government course as a tire graded 100. However actual tire performance depends on driving habits, road characteristics, service practices, and other factors that can influence the outcome. 

Traction Grades AA, A, B and C 
The traction grades from highest to lowest are AA (the highest), A, B and C. They represent how well tires stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. C-rated tires will have the lowest traction performance.  

WARNING: THE TRACTION GRADE ASSIGNED IS BASED ON A WET BRAKING (STRAIGHT AHEAD) TRACTION TEST AND DOES NOT INCLUDE CORNERING (TURNING) TRACTION.

Temperature Grades A, B and C 
The temperature grades A, B, and C represent the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the tire’s material to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a performance level all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades A and B represent higher levels of performance on the laboratory test wheel than the minimum required by law. 

WARNING: THE TEMPERATURE GRADE IS ESTABLISHED FOR A TIRE THAT IS PROPERLY INFLATED AND NOT OVERLOADED. EXCESSIVE SPEED, UNDER INFLATION, OR EXCESSIVE LOADING, EITHER SEPARATELY OR IN COMBINATION, CAN CAUSE HEAT BUILDUP AND POSSIBLE TIRE FAILURE.

DOT Quality Grades 
All passenger car tires must conform to other federal requirements in addition to these grades.

Learn about our mission, our achievements, and our ongoing commitments

Read Our Origin Story

How to Read Tire Size

Installing the right tires on your vehicle is essential to the overall performance and safety of your vehicle. Your tire choice should reflect the conditions in which you drive and your preferences for vehicle response and handling. To make the most informed decision, though, you must understand how to read tire size when it's time to buy tires.

Thankfully, determining the correct tire size for your vehicle is relatively simple. All the information you need is immediately available either in your owner's manual or somewhere on the vehicle itself. Already know how to read tire size numbers? Skip the explanation and find the right Bridgestone tire for your vehicle online or by visiting a Bridgestone tire dealer near you.

While actual, physical measurements like width and diameter are factors in finding the right tire size, there are additional details to consider. Knowing how to read car tire sizes also means understanding terms like load index and speed rating that affect your vehicle's overall capabilities.

WHERE TO FIND A CAR TIRE SIZE

No matter what vehicle you drive, finding the manufacturer-recommended tire size should be easy. The best place to start looking is the owner's manual.

Don't worry if you can't locate the manual; you may also find a tire fit guide in these locations:

  • The driver's side door jamb
  • Inside your glove box door
  • Within your gas tank hatch

You can also find tire size data on the sidewall of your current tires (assuming they're the proper size). However, no matter where you find your tire size, you will have to decipher a sequence of numbers and letters. Don't worry if it looks confusing at first — every letter and number has a straightforward meaning. Let's break down how to read car tire size.

HOW TO READ TIRE SIZE

Let's take a look at what each number or letter stands for, one by one, in the order they appear in your tire size data. We'll be using this tire size as an example: P225/70R16 91S.

THE LETTERS "P" AND "LT"

For most vehicles, you'll see the letter "P" before the number sequence begins: P225/70R16 91S. The "P" is short for "P-metric," which is a designation by the Tire and Rim Association for a "passenger car" tire type. A "P" signifies the tire was designed to primarily be used on passenger vehicles, which can include cars, minivans, SUV's and other light-duty pickup trucks.

If you see "LT" instead of "P," it's because you need "light truck" tires – "LT" is short for "LT-metric," which is a designation by the Tire and Rim Association for a "light truck" type tire. Light truck tires are designed to be used on vehicles capable of carrying heavy cargo or pulling trailers.

Similarly, "T" stands for "temporary" and is for your spare tire. If you see "ST," that means "special trailer." A special trailer tire is never installed on the drive or steer wheels. It's only intended for use on trailer axles.

WIDTH

The first number to appear in your tire size information is the width, in millimeters, of the correct tires for your vehicle: P225/70R16 91S.

Tire width always refers to the measurement from one sidewall to another. Thus, a tire with the measurement "P225" is for a passenger vehicle and has a nominal width of 225 millimeters.

ASPECT RATIO

After the slash mark, the next number you see is for the tire's aspect ratio, which essentially tells you how tall your tire's profile is: P225/70R16 91S. Aspect ratios are delivered in percentages. Tire makers calculate the aspect ratio by dividing a tire's sidewall height by its width. If a tire has an aspect ratio of 70, it means the tire's height is 70% of its width.

Lower aspect ratio tires, such as a 60 series, generally offer vehicle handling performance advantages over higher aspect ratio tires, such as a 75 series.

CONSTRUCTION

After the aspect ratio comes a letter to indicate the tire's construction: P225/70R16 91S. "R" refers to the internal structure of your tire and gives you a general idea of its stability.

There are two types of construction that you may see on the sidewall of a tire

  • R - Radial 
  • D - Diagonal or Bias Ply

"Bias-ply" tires were used on automobiles and light trucks until the '70s," reports the classic car site, Hemmings. But radial tires represent the vast majority of tires on the road in the United States today. In fact, you will almost always see the letter "R" on tires as radial tires have been the industry standard for over 40 years. Radial construction means the tire's internal ply cords are oriented in a radial direction (at 90 degrees to the centerline of the tread).

RIM DIAMETER

The next number is the wheel’s diameter. For example, a tire with the P225/70R16 91S would fit a rim with a 16-inch diameter.

Take note: if you decide to change your rims' size, you will also need to get new tires that are compatible with the change in size. Tires designed to fit a 16-inch wheel diameter will not stretch to fit on new 18-inch rims.

View Other Common Diameter Sizes:

    14-Inch Diameter Tires

    15-Inch Diameter Tires

    17-Inch Diameter Tires

    18-Inch Diameter Tires

    19-Inch Diameter Tires

    20-Inch Diameter Tires

    21-Inch Diameter Tires

    22-Inch Diameter Tires

    LOAD INDEX

    The next figure needed to read tire size numbers is your tire's load index. The load index tells us how much weight, in pounds, the tire can support when fully inflated: P225/70R16 91S.

    It is called the load "index" because the figure doesn't tell us the precise number of pounds the tire can support, at least not by itself. Instead, the number corresponds to a specific load capacity listed in an index. Beginning with one and ending with 150, numbers in the load index represent carrying capacities of 99 to 7385 lbs.

    Additionally, you may not find this number present on all tires. This is because the load index is not required by law to be printed on tires. If there is no load index measurement on your tires, check the owner's manual or contact your local Bridgestone tire dealer for more information.

    SPEED RATING

    The final figure in a tire size sequence is the speed rating indicated by a letter: P225/70R16 91S. Just as your load index number corresponds to a particular load, your speed rating letter corresponds to a specific speed capability based on a standardized laboratory test.

    For example, a tire with a speed rating "S" is rated for up to 112 mph, while a tire rated "R" is up to 106 mph. Remember that this isn't a recommended cruising speed, but rather the maximum speed that tire type can withstand. Of course, you should always follow legal speed limits on roadways.

    Here are the most common letters for speed ratings and their corresponding maximum speeds:

    • Q: 99 mph
    • R: 106 mph
    • S: 112 mph
    • T: 118 mph
    • U: 124 mph
    • H: 130 mph
    • V: 149 mph
    • W: 168 mph
    • Y: 186 mph
    • ZR: 186+ mph

    Tires with higher speed ratings tend to offer increased handling performance. Replacement tires must have the same or higher speed rating to maintain vehicle speed capability. If a vehicle has tires with different speed ratings, the speed rating of the "slowest" tire dictates the vehicle's top speed.

    Like the load index, the speed rating is not required by law to be listed on all tires. If your tires do not have the speed rating listed, your owner's manual will have the relevant information for your model's stock tire type.

    SEVERE SNOW CONDITIONS

    You may find "M+S" or "M/S" after the main tire size sequence on some tires. This indicates that the tire has some capacity to handle snow and mud conditions. This indication is common on most radial or "R" type tires.

    USDOT TIRE IDENTIFICATION NUMBER

    You may notice another set of letters and numbers on your tire's sidewall beginning with "DOT." This is not an indication of tire size, but rather that the tire complies with Federal Motor Vehicle Safety Standards. The "DOT" stands for Department of Transportation and is followed by the tire identification number.  

    The first two letters or numbers after DOT refer to the manufacturing plant where the tire was produced and the last four numbers indicate the week and year the tire was made. The numbers 4318, for instance, indicate that the tire was manufactured during the 43rd week of 2018.

    CAN I PUT LARGER TIRES ON MY CAR?

    While it's certainly possible to upgrade your tires' size, it's usually best to stick to your manufacturer-recommended tire size for optimal performance. Increasing the size of your tires may give your car more ground clearance, but it may also affect handling, drivetrain performance and fuel economy. Keep in mind the changes to key figures mentioned above, such as load index and speed rating, and how they may affect your vehicle's capabilities if you decide to increase tire size.

    SHOP TIRES BY SIZE

    Once you know how to read the numbers on tires, you can explore tires by size and narrow down your tire options quickly. Compare tire sizes online or visit a Bridgestone tire dealer near you for help.

    Truck Tire Markings: Deciphering Performance Designations

    Choosing the right truck tires is essential to safe and trouble-free operation of your vehicle. Therefore, it is necessary to know how the features of the marking and designation of rubber. This will help you understand the nuances and choose the most suitable set of wheels for current operating conditions.

    Contents:

    • 1 Tire designations
    • 2 Meaning of the tube markings
    • 3 Rim tape identification
    • 4 regulatory requirements and standards GOST 5513-97
    • 5 Speed ​​index
    • 6 load index
    • 7 designation of American Supply
    • 8 Color Tags
    • 9 Additional inscriptions

    SINS


    marking indicating the required parameters. In order to understand the specification of rubber, you should read the letters on the sidewall of the wheel, located around the entire circumference. The name and logo of the manufacturer, the brand of rubber, the direction of rotation of the wheel, and the dimension of the product are printed in large letters.

    In the Russian market, in the marking of tires, European examples of dimension designation are most often found. For example, the size 286*75*R15 is deciphered as follows:

    • the first digit indicates the tread width;
    • the second is the ratio of the height of the pattern to the width of the rubber. It is noteworthy that this indicator is not constant - the profile height of tires 165 * 40 * R16 or 195 * 40 * R16 will be different;
    • the third digit is the diameter of the seat rim in inches, i.e. 16;
    • the letter R indicates that the tire has a radial construction. Older examples have a diagonal cord weave.

    Meaning of the tubes

    As a rule, wheels for light vehicles are tubeless. This means that the rubber is simply put on the disc. Such products are labeled Tubeless. However, you can often find older models or domestically produced truck tires with TT (Tube Type) symbols. In the presence of this inscription, the tire is considered chambered.

    The cameras themselves also have their own symbols. Their decoding is very simple - the first number indicates the profile width in inches, and the two digits at the end indicate the bore diameter. There may also be symbols indicating the scope of the camera:

    • LGA - passenger car or lt;
    • GA - trucks and dump trucks;
    • LA - cars and minibuses.

    Keep in mind that tube tires require special rims for tubes. Therefore, attention should be paid to their designation. Signs LK, GK or RK are deciphered as: cars with a camera, trucks with a camera, adjustable tube tire. On the disks of this manufacturer, you can install chamber rubber.

    Rim tape marking

    Sometimes cargo kits are installed using rim tape. It consists of durable elastic rubber and is worn under the tire itself. This allows you to better protect the sidewall from abrasion and damage to the cord on the surface of the disc.

    The tape has its own marking consisting of two numbers. The first number is the band width and the second is the rim diameter. Sometimes two values ​​​​are indicated in the marking of the rim tape for the wheel - in inches and millimeters for ease of use.

    Regulatory requirements and standards GOST 5513-97

    A complete list of compliance with the requirements of truck tires is described in GOST 5513-97. The document regulates all the standards for such tires and the required parameters. All markings must be on the outside. A height of 1.6 mm is the minimum indicator for a tire tread. When these indicators are reached, the kit must be replaced. Winter tires have completely different standards - here the critical number is 2.5 mm of residual tread height.

    This document also regulates the ply rating of tires. Plying - the number of layers of cord on the sidewall of the rubber. For diagonal truck tires, the designation starts with 8 plies, and the maximum figure is 18. Radial wheels are more durable and modern.

    Speed ​​index

    Another important characteristic of truck tires is the maximum speed index at which you can continue driving. In the marking of truck tires, this indicator is indicated by the letter of the Latin alphabet. The closer it is to the end of the alphabet, the higher the speed category. Truck tires are produced with indices J, K, l, M, N, P, Q, R corresponding to speed indicators from 100 to 170 km/h in 10-point increments.

    Load index


    In addition to the speed category, the tire load index for SUVs and trucks is indicated. These two numbers are adjacent to the maximum speed indicator. The higher this indicator, the greater the maximum allowable load on each wheel. This parameter is calculated at the maximum allowable tire pressure (kPa). This indicator is indicated on the sidewall of the tire.

    The minimum index for trucks is 119 for single wheels and 116 for twin wheels. If the letters EL or Reinforced are applied to the rubber, then this indicates a reinforced structure and an increased number of Radial layers. This inscription indicates that the load capacity of the wheel is 3 units higher.

    Tire markings
    Index Maximum wheel load
    116-120 1250-1400
    121-130 1450-1900
    131-140 1950-2500
    141-150 2575-3350
    151-160 3450-4500
    161-170 4625-6000
    171-180 6150-8000
    181-190 8250-10600

    US size designation


    There are two markings for American tires. The first one is very similar to the European one, only letters are added in front of the standard size indicating the scope of the product. For example, P 195 60 * R17, in addition to the profile height and landing diameter, says that the tire is installed on passenger cars (P - passanger), and the letters LT or T indicate the cargo direction (Light Track, Track).

    The second way to label light truck tires uses a different approach and inch system. If there are numbers on the product, for example, 30 * 10 * R16, then 30 is the outer diameter of the tire in inches, 10 is the tread width, and 16 is the diameter of the inner rim.

    Color markings

    Sometimes there are color markings on the tire. This means that there are reinforced places in the tire design. These inhomogeneities are completely normal and are designed to facilitate editing on the disc and achieve balance.

    The yellow triangle indicates the heaviest part of the tyre. Such a mark must be aligned with the letter L on the stamped disc itself.


    The red dot marks the stiffest part of the wall and aligns with the same mark on the alloy wheel. Colored stripes or a white stamp with a number may also be present. The first ones help to find the necessary kit in the warehouse, and the second one gives information about the number of the inspector at the factory who evaluates the kit.

    Additional markings

    Some manufacturers add additional markings to their products. The production date is very common. It is expressed in four digits. The first indicate the serial number of the week, and the last two indicate the year of production. The date of manufacture with the following figures 1710 is the 17th week of the 10th year.

    You can often see the sign Outside. Such rubber has an asymmetric tread pattern, and the badge should be directed outward. This will ensure that the kit behaves correctly under all conditions. If there is no such inscription on the sidewall of the tire, then it can be installed on any axle by any side.

    Standard kits are designed for safe driving on normal surfaces. If you need improved cross-country performance, then you should take a set of size M + S. If these characters are deciphered for trucks, then they stand for Mud + Snow. Such wheels are considered all-weather and can provide good cross-country performance even when driving on muddy or snowy roads.

    New cars > Tires >

    Truck tire calculator

    (831) 262-1-262 retail
    (831) 262-1-176 for legal entities persons
    [email protected]

    Truck tire calculator

    Attention! This calculator is only for truck tyres, please use the tire calculator for passenger tyres.

    Why do you need a truck tire calculator:
    With the help of a truck tire calculator, you can easily calculate how the outer dimensions of the wheel, ride height (clearance), speedometer readings and other characteristics will change when you install tires with a different size on your truck.

    How to use the truck tire calculator:
    First enter the size of truck tires installed on your car, and then the one you want to install and click "calculate". The table below shows the calculation results.

    When you decide on the size you need, you can pick up and buy truck tires in our store.

    Dimensions Old New Difference
    inch see inch see see
    Profile width (A)
    Profile height (H)
    Tire size (R)
    Tire outer diameter (D)
    Speedometer (km/h)
    Actual speed (km/h)
    Speedometer difference (%)

    .


    Learn more