How to paint your tires black

Tire Paint Restores Like New Appearance to Your Tires – Colorbond Paint


Faded, scuffed, or discolored tires can make a vehicle look bad. Affecting your enthusiasm for the car or truck and possibly even the resale value. The tires may still have a decent amount of service life left. So, spending money on an expensive new set of tires, just for a better appearance, may not be a good idea. In this case, what do you do? We have two words for you. Tire paint.

Tire Blooming

Tires can start to look faded because of oxidation, and “tire bloom” can cause the tires to get a brownish color. Tire bloom is caused by antiozonant, which is a chemical in the rubber that helps keep tires from deteriorating from oxidation, rising to the surface of the tire.  Tire dressings can go a long way to temporarily make tires look better, but it they don’t make the actual color of the tire darker. As well they will wash off and can sling off the tire and onto the car. With tire paint, the black color of the sidewall is restored making it appear new, and it provides a long lasting and durable shine.

Painting Tires

When painting tires, it is important to use paint that is specifically formulated for use on tires. Tire paint is designed to bond to rubber and not expand or retract with changes in heat. Tire paint is formulated to be resistant against scratching and chipping from things like gravel strikes, as well as to be resistant to sunlight, salt, and chemicals.

Inspect the Tires Before Painting

While you can paint tires to improve their appearance, be aware that signs of aging may not just be cosmetic. Inspect your tires for bulges in the sidewalls, which is an indication that a blowout is soon to follow. If a tire has bulge replace it immediately. Also, check for fine cracks in the sidewall or tread of the tire, which indicates the tire is aged and needs to be replaced. Compounds in the tire which function to keep the rubber supple, and integral have been exhausted and the rubber is drying out, becoming stiffer, and deteriorating. Which can make the tire prone to a blowout. So, painting a tire that has reached this point, and continuing to drive on it, is a bad idea. In this case, even if there is a lot of tread left, it is best to replace the tire.

What Paint do You Use to Paint Tires?

ColorBond offers Spit Shine Tire Black to restore tire sidewalls to a like new appearance. Spit Shine Tire Black bonds to the tire surface and will not sling or wash off. ColorBond is a great tire paint option as it restores color and shine to the tire without stripping the antiozoants that protect the tire. ColorBond is user friendly as it sprays on without use of primers and dries quickly. Quick dry time allows you to apply additional coats without a long wait between coats. So, you can get the job done in a short amount of time.

How to Paint Tires

Application of Spit Shine Tire Black is easy:

  1. Clean the tires with soap and water. Use a degreaser as necessary
  2. Mask off the rim of the tire (and body of the vehicle adjacent to the tire, if the wheel hasn’t been removed from the car)
  3. Spray paint tires with Spit Shine Tire Black
  4. Allow to dry for 15 minutes

ColorBond Spit Shine Tire Black comes in a 12 oz. aerosol can and covers approximately six square feet.

Why spend hundreds or thousands of dollars on a new set of tires when you can make your tires look great with tire paint?

For more information on ColorBond Spit Shine Tire Black click here.

If you are looking for more ways to detail your car with ColorBond products check this out: How to Prepare a Car for Shows – Part 2 – Colorbond Paint

Can You Use Spray Paint On Tires? (Step-by-Step Instructions)

Spray painting your tires is a very popular method of customizing the look and feel of your vehicle, but it can be tricky to get right. If you are wondering whether or not spray paint will work on your tires, then this article should help clear up any confusion.

Spray paint is one of those things you hear about all the time, but few people know how to do it properly. If you want to spray paint tires, there are some important steps you need to take for them to look good.

This article will go over what you need to consider before attempting to spray paint your tires. So, if you are looking for some tips on spray painting your tires, keep reading!

Table of Contents

Can you use spray paint on tires?

Yes, you can use spray paint on tires. However, it is important to understand that there are different types of spray paints available, and not all of them are suitable for spray painting tires.

Most of the spray paints designed for indoor and outdoor use will not adhere well to rubber surfaces, so they won’t give you the results you expect when you try to apply them to tires. Tires will come in direct contact with the ground, so if you apply regular spray paints on tires, they will peel off quickly. 

If you want to ensure that spray paint on your tires lasts longer than just a few weeks, then you need to choose a high-quality spray paint specifically made for tires. These spray paints are specifically designed for tires, and they will provide much better protection against weathering and other damage.

These spray paints will adhere well to tires and do not peel off easily. They also have a long-lasting effect because they contain special ingredients that prevent the tire from absorbing moisture. This means that your tires will stay protected for much longer than normal.

Also read: Can you use spray paint on a car?

What is the best spray paint for tires?

Since many spray paints are available for tires, it becomes quite difficult to decide which ones will perform the best. After testing many of these spray paint on tires, we found the Dupli-Color Tire Spray Paint the best option. It comes in black color. The spray paint has been specially formulated to protect your tires against the elements, and it provides excellent coverage.

Check Latest Price

Dupli-Color Tire Spray Paints are easy to apply, and they dry fast. They also offer great protection against UV rays and water. In addition, the spray paint does not require any additional preparation like primers or sealants.

This high-quality spray paint gives a glossy finish and dries quickly. Moreover, the spray paint is completely Silicon free, making it safe for humans and animals.

How to apply spray paint on tires? (Step-by-step guide)

Now that you know what is the best spray paint for tires, let us look at how you should apply this spray paint on your tires. Follow these simple instructions carefully, and you will be able to get the best results possible.

How to apply spray paint on tires?

1. Clean your tires thoroughly

First thing first, you need to clean your tires thoroughly. Remove dirt and debris from the surface of the tires using an old toothbrush. Then wash the tires using soap and warm water. Make sure that you clean the tire thoroughly and that there is no dirt and debris left on the tire after washing them.

2. Cover the rim of the tire with masking tape

The next step is to cover the rim of the tire using masking tape. Make sure that you cover the entire rim with masking tape. Otherwise you may end up getting unwanted marks on your rims.

3. Apply the first coat of spray paint

After covering the rim of the tire, apply one thin layer of spray paint on your tire. Do not overdo it, as you don’t want to face dripping issues while applying the spray paint. Just paint enough to cover the entire tire evenly.

4. Let the first coat dry completely

Once you have applied the first spray coat, wait about 15 minutes before moving on to the second coat. This is very important to let the first coat dry completely before applying the second coat. Otherwise, the spray paint will start cracking and bubbling up.

Apply 3 to 4 thin coats of spray paint to cover the entire tire with spray paint. Let each coat dry completely before applying the next coat.

5. Wait for the spray paint to dry completely

After applying several coats of spray paint, make sure that you leave the spray paint to dry for about 24 hours. If you try to speed up the drying process, you might have bubbles, cracks, and peeling issues. So just give the spray paint time to dry completely.

6. Remove the masking tape

Once the spray paint has dried completely, remove the masking tape. Now you can use your new tires without worrying about scratches and other damages. You can easily spray paint tires by following the above-mentioned steps.

Make sure that you pick the right spray paint for your tires and follow all the safety precautions while spraying the tires.

Also read: How to remove spray paint from wheels?

Things to consider before spray painting tires

There are a few things that you must keep in mind before spray painting your tires. These tips will help you avoid common mistakes and save your money too.

1. Check the tire tread depth

Before spray painting your tire, check whether the tire tread depth is sufficient. The deeper the tread depth, the more durable the tire will be. However, if the tread depth is less than 1.6 millimeters (2/32 inches), you should definitely replace the tires.

2. Ensure that the treads are even on each tire

You should also ensure that the treads are uniform on each tire. If they aren’t, you may get uneven wear, leading to premature tire failure.

3. Check if there is any damage

If you find any damage on the tire, such as cracks, punctures, cuts, etc., then you shouldn’t use those tires at all. Buying a new set of tires would be better than wasting your money on spray paint-damaged tires.

4. Check the age of the tire

Avoid spray painting tires that are more than ten years old. An old tire will not last longer, and spray painting an old tire won’t do much good either.


Spray painting tires is a great way to change the look of your vehicle. But you need to take care of the tires properly so that you don’t end up damaging them. Follow these simple steps to spray paint your tires and enjoy the benefits of a new set of tires.

Also, make sure that you choose the right spray paint for the job. And always read the instructions carefully before using it. Follow the tips mentioned above, and you will surely achieve success when spray painting your tires.

Let me know what you think about spray painting tires in the comment section below. Do share this article with your friends and family members who love spray painting.



How long does spray paint on tires last?

A good quality spray paint can last up to one year since it has been formulated to stick to rubber. The actual durability of spray paint will depend on factors like how often you use the tires, wear and tear weather conditions, and how many coats of spray paint were applied.

What spray paint to use on tires for the garden?

You can use any outdoor non-toxic spray paint to use on tires for the garden. Also, avoid black-colored paint since it will absorb sunlight and heat, which is not good for the plants. Use a light color spray paint, preferably white or yellow.

Is it safe to spray paint my car tires?

Yes, it is completely safe to spray paint your car tires. No harmful chemicals are used in these spray paints; they are completely silicone-free. All you have to do is follow the instructions given by the manufacturer.

Do I need to clean my car tires before spray painting?

Yes, you must clean your car tires before applying the spray paint. This will remove dirt, oil, grease, and other contaminants from the surface of the tires. Cleaning the tires will help the spray paint to adhere well to the tires.

How to paint tires? / Types of paint and complexity.

Summer tires 15 radius in the catalog with prices and photos.

Tuning enthusiasts often wonder how to paint tires. Such refinement significantly changes the appearance of the car. Changing the color of tires allows you to highlight your car from the traffic flow.

Tire painting problems

In fact, painted tires are not new, they have been used for a long time. Drivers who decide to paint with their own hands face a number of difficulties. First of all, we are talking about the fragility of the decor.

At the beginning of the last century, the most expensive tires were products with particulate tread. At the same time, the sidewall remained white or gray. By the end of the twenties, the tires were completely black, and the white sidewall remained a sign of an expensive car. Now this was achieved by painting.

The first problem is the wrong choice of paint. Acrylic or oil paint, which is familiar to everyone, is not suitable here. They crack quickly when used. It is necessary to choose specialized dyes, then the service life will increase significantly.

There are several reasons for accelerating the "descent" of the paint.

  • Permanent deformation. The tire constantly experiences dynamic loads, absorbing them, it deforms. Cord limits this process, but does not completely eliminate it. As a result, the paint, having less plasticity, quickly begins to crack.
  • Chemical reagents. There are many different chemicals on the road. In summer - gasoline and oils, in winter - anti-icing reagents. They gradually corrode the paint.
  • Mechanical impact. Sand, water, dirt can remove the pigment from the tire.

All of the above makes it almost pointless to use conventional dyes.

What kind of paint is needed for tires

When deciding what kind of paint the tire will be treated with, you should familiarize yourself with the features of the proposed dyes. Compounds based on rubber and polyurethane are used. Substances retain sufficient plasticity after drying. Tire paint must withstand all adverse conditions. As a last resort, buy any marked "suitable for rubber."

Such paint can be produced in the following types:

  • Aerosol can;
  • Bucket or jar;
  • Marker.

The choice in what form to purchase paint will have to be done independently, based on your own convenience. For example, it is easier to make an inscription with a marker, and it is easier to completely paint it with a brush from a can or spray can.

We list several paint options found in stores.

  • KCh-136. Created on the basis of natural rubber, contains polymers. Produced in white only.
  • Rezel+. Contains latex and acrylic. May be different colors. Produced packaged in cans or jars.
  • White Tire Pain. Produced on a polymer basis. It is found in all types of packaging.

When deciding how to paint tires, take into account the features of operation. Winter or summer tire. How will you apply the pigment?

Tire painting stages

Painting tires yourself is a simple task. As a result, your car will look like you imagine it. Let's consider the process step by step.

  • Remove the wheel. Seal the disk with paper, all parts of the tire that are not planned for painting should also be protected.
  • The tire is thoroughly washed. All dirt must be removed.
  • Degrease the surface. To do this, you can use acetone, a solvent.
  • Preparing paint. Dilute it to the optimum density, add color pigment. Shake the can vigorously enough.
  • Apply paint carefully. Especially when it comes to labels. Remove all stains of dye immediately.
  • After the first layer has dried, apply the second. This is usually enough to completely cover the black color of the tire.

This completes the painting. Wait for it to dry and you're good to go.

Lettering is best applied symmetrically.

With painted tires, the car looks very original. If you want to highlight your vehicle at minimal cost, just paint the tires, or put inscriptions on them.

Tire blackening, paint for rubber

After a certain time, the tires on the wheels lose their color - fade, affecting the overall appearance of the car. There are two ways to restore the lost shine and color of wheel tires: using blackening or paint for rubber.


  • 1 Ways to restore the color of car tires without using paint
  • 2 Making your own stains
    • 2.1 Using glycerin
    • 2.2 Laundry soap
    • 2.3 PMS-200 silicone oil
    • 2.4 Shoe cream
  • 020

Ways to restore the color of tires without the use of paint

Blackening of tires

The process of blackening tires involves covering the tires with a special liquid - blackener. You can buy such a tool at the car market or in special stores. The range of factory blacks is represented by two types of blackening mixtures:

  1. Brilliant. These substances are made, as a rule, on the basis of a lubricant that has a silicone composition. When applied to a tire, the surface of the rubber becomes glossy. At the same time, “brilliant” products are perfectly washed and are not washed off for several washes. The disadvantage of these inks is that they strongly stain the surface. If the blackener gets on the surface of the car, the body will have to be washed for a very long time. Therefore, when applying these products to rubber, safety measures must be observed (use rubber gloves, do not allow substances to come into contact with the skin).
  2. Matte. These products do not provide a mirror surface to the tires after applying the substance to the tire, but they add brightness to the shade of the tire. The appearance of tires after using these blackening agents becomes bright, better than that of new tires. Of the shortcomings, it should be noted:
  • less resource than "shiny" substances: "matte" is easier to wash off with water;
  • are quickly absorbed.

In addition to improving the appearance of tires, blackeners protect rubber from external negative effects of sunlight, water, chemicals, and so on. The protective function of these substances is possible due to the creation of a thin film on the surface of the tire.

We recommend watching a video about blackening tires at home:

Making your own blackeners

Blackening with a solution of glycerin and water

Applying blackening or paint to restore the color of rubber requires a lot of money. To save the budget, many motorists make ink at home. Consider the most common recipes for these substances.

Use of glycerin

Glycerin can be purchased at the pharmacy, the substance is sold in a bottle of 25 or 40 ml. To obtain an ink solution, you will need from 5 to 7 bottles. Glycerin is poured into a container with a sprayer (a container for washing glasses or spraying plants, and so on). Water is poured into the same container, a ratio of 1: 1, for example, for 6 bottles of glycerin you will need:

  • 6*25=150 ml water;
  • 6*40=240 ml water.

In the first version, the volume of the glycerin bottle is 25 ml, in the second, 40 ml. Before applying a mixture of glycerin and water to tires, the tires are thoroughly washed and dried. The ink mixture is applied to a sponge or rag, with which the blackening process is performed. Advantages of using a glycerin mixture:

  • low cost;
  • the ability to refresh the color of tires regularly;
  • availability and speed of the blackening process, no need to have special skills;
  • Possibility to use the specified mixture for blackening the bumper.


  • under ideal operating conditions, the car blackening film will last a week on the surface of tires;
  • blackened bumper can even be washed away by rain;
  • glycerin attracts dust;
  • the beautiful black color of the tires will disappear after the first wash.

Laundry soap

A soap bar with at least 70% fatty acids will do. The process of returning the lost color to tires consists of the following steps:

  • clean the surface of the tire from dirt, moisten the tire with water;
  • lather a brush with medium bristles with laundry soap;
  • Use a brush to rub the soap solution into the surface of the tire.

The advantages of this method:

  • ease of use;
  • low cost.

Disadvantages: Laundry soap dries out tires a lot, reducing their resource - this method of blackening should not be used regularly.

PMS-200 silicone oil

To blacken tires in this way, apply a little silicone on a sponge and use it to rub the substance into a clean surface of the tire. Advantages:

  • the effect is longer lasting than that of previous methods;
  • one bottle of this stainer is enough for a year with regular use;
  • no harm to tire surface.

Disadvantages: The cost of the product is slightly higher than previous methods.

Shoe cream

Using this method you can use:

  • Shoe cream black;
  • colorless shoe shine;
  • shoe polish.

Before applying the stainer, the tires are washed, then a little staining agent is applied to a sponge or rag and the substance is rubbed into the rubber surface with it. Benefits:

  • long-term effect;
  • if the substance gets on the car body, it can be washed off.

Disadvantages: you can not use the car immediately after blackening, you need to wait until the coloring matter hardens - from 10 to 15 minutes.

Tire tuning using paint

Car tuning option with inscription on the tire

You can restore the lost gloss to tires by applying blackening or paint for rubber. The second method allows you to achieve a longer result than the first method. In addition, painting tires allows you to tune the car, making it look original.

Please note: you need to paint the outer part of the tire, the inner side of the product is invisible, and the working surface is in contact with the roadway. Perhaps incomplete coloring of the outside of the tire, it is allowed to apply special inscriptions that differ in color from the color of the tire. For painting tires, it is better to use a special paint with the following properties:

  • rubber adhesive;
  • providing an elastic layer after drying, otherwise, when the car is moving under the influence of loads on the wheel, the paint layer will crack;
  • with increased wear resistance.
  • If you paint the tires with a special paint, you can protect the rubber from external factors and thus extend the life of the tires.

    The most popular white rubber paint, with its help, letters and inscriptions are applied to the surface of the tires, and the car acquires a retro style. If you want to use a different color scheme, you should take into account the area of ​​​​painting, since the price of colored paint is high.

    Rubber paints based on latex or rubber should be preferred. At the same time, keep in mind: ordinary latex paints for painting, for example, walls will not work, they will not be able to provide proper elasticity due to their low latex content.

    Please note: if you want to highlight a certain inscription on the tire, you can purchase a marker filled with paint - this will greatly simplify the work.

    Do-it-yourself tire painting

    Painted wheel at home

    When starting the painting process, carry out preparatory work:

    • inflate tires to working pressure;
    • wash the surface of the tire from dirt, for this purpose you can use soda diluted with water to a mushy state;
    • degrease the tire surface using alcohol or thinner;
    • let the tire dry completely.

    Required tools and materials:

    • rubber paint;
    • special brush or spray gun, it is possible to use a marker with paint;
    • masking tape;
    • rubber degreaser;
    • napkin or sponge to wipe off smudges.

    When painting, warm up the sealant a little so that it adheres better to the rubber surface. If you plan to make an inscription or a drawing on the tire, then masking tape is used to obtain a clear line. It is possible to paint over a tire well by applying several layers of paint, approximately 2-3 layers. Painted rubber can be used 24 hours after the final coat of paint has been applied.

    When applying certain lines or symbols to the rubber, keep in mind:

    1. Do not make a thick line in the middle of the tire, it will visually divide the tire into two parts.
    2. A thin line in the middle of the tire will make the wheel look smaller.
    3. To visually blur the outline of the wheel and make it fuzzy, a contrast line is applied along the outer edge of the tire.
    4. Visually makes the profile of the tire smaller and increases the size of the rims line along the inner contour of the tire.

    Of the presented options for applying the line, the most advantageous are stripes along the inner contour of the product. It should be borne in mind that such tuning of low-profile tires will make the rubber bead too thin: the tire will look ridiculous.

    Wrong combinations of several colors must also be avoided. For example, it is not recommended to tune wheels in green with red tires if the car body is gray. The best option is when the inscription matches the color of the body, or serves as its contrast.


    Using blackening or paint for rubber, first of all, it is worth considering the benefits for tires from applying certain products to tires. For example, too frequent use of laundry soap to make tires shine will reduce the life of a tire, while glycerin and silicone substances prevent the rubber compound from drying out.

    Learn more