Home > Company > Tire Safety > Choosing Tires > Determining Tire Size
Once you have determined it’s time to buy tires, you’ll need to know what size tires are correct for your vehicle. Depending on what you drive, you may be interested in how to find the right tire for your…
This information is usually inside your car’s doorjamb, in your owner’s manual. To ensure your current tire or a replacement tire you may be looking at matches your vehicle’s requirements, it will be good for you to understand how tire sizing works. You may have never paid attention to the string of numbers and letters on every tire, but it’s a gold mine of information.
If you’re unsure of how to read tire measurements from your tire walls, the information and graphics below will tell you how to read tire size, understand and interpret it. If you decide you want to substitute a new size or tire type, consult an authorized tire retailer who can expertly advise you, because many optional tire sizes may have different load capacities and could require wheels of a different rim width or diameter and different inflation pressure.
Not sure you need new tires? Our Tire Replacement Guidance article will help you determine whether it’s time to retire your tires.
Most passenger cars, SUVs and light pickups (1/2 ton and smaller) will come with tires that are either P-Metric or Euro-Metric. For P-Metric tires, you’ll see the letter “P” before the number sequence begins: P225/70R16 97H. P-metric is a designation standardized by the Tire and Rim Association for a “passenger car” tire type. For Euro-Metric there will be no preceding letter before the number sequence begins: 225/70R16 98H. Euro-Metric is a designation standardized by the European Tyre and Rim Technical Organization for a “passenger car” tire type.
Both P-Metric and Euro-Metric size tires are designed to primarily be used on passenger vehicles, which can include cars, minivans, SUVs, and other light duty pickup trucks.
If your vehicle is an SUV, Pickup truck or van, you might see a different type of size designation on your placard that is specific for heavy duty light trucks and vans, especially common on ¾ ton and larger pickup trucks and vans. There are two common size types in this category, LT-Metric and Euro-Metric Commercial (aka C-type). Both size types are metric and so use the same structure as P-Metric and Euro-Metric but have some different characters in the size that differentiate them from their passenger car cousins. LT-Metric tires will have the letters “LT” before the size number sequence: LT245/75R17 119/116R Load Range E. Notice that there are two load index numbers and a Load Range, see the section on Load Index for more info. LT-Metric is a designation standardized by the Tire and Rim Association for a “light truck” type tire.
Euro-Metric Commercial or C-Type tires will look very similar to a passenger Euro-Metric size except that there will be a “C” right after the rim size: 23/65R16C 121/119R. Notice that the C-type tires also have two load index numbers. Euro-Metric Commercial, or C-Type is a designation standardized by the European Tyre and Rim Technical Organization for a light truck type tire. Light truck tires are designed to be used on vehicles capable of carrying heavy cargo and are usually only specified by a vehicle manufacturer on vehicles exceeding a certain load capacity.
Other types of tires that fall into the Metric sizing type are Temporary Spares, they start with “T”. If you see a size that starts with “ST,” that means “special trailer” and is only for use on a trailer.
Regardless of whether you are looking at a P-Metric, Euro-Metric, LT-Metric, Euro-Metric Commercial, T or ST tire the numbers in the size mean the same thing.
The first number to appear in your tire size information is the width, in millimeters, of the correct tires for your vehicle: P225/70R16 91S.
Tire width always refers to the measurement from one sidewall to another. Thus, a tire with the measurement “P225” is for a passenger vehicle and has a nominal width of 225 millimeters.
After the slash mark, the next number you see is for the tire’s aspect ratio, which essentially tells you how tall your tire’s profile is: P225/70R16 91S. Aspect ratios are delivered in percentages. Tire makers calculate the aspect ratio by dividing a tire’s height off the rim by its width. If a tire has an aspect ratio of 70, it means the tire’s height is 70% of its width.
Lower aspect ratio tires, such as a 60 series, generally offer vehicle handling performance advantages over higher aspect ratio tires, such as a 75 series, but a typical trade off can be ride harshness.
After the aspect ratio comes a letter that indicates the type of internal construction maintaining your tire’s stability: P225/70R16 91S.
There are two types of construction that you may see on the sidewall of a tire:
Radial tires are the most common tires on the road in the United States today; thus “R” will usually be shown in the tire size designation. Radial construction means the tire’s internal ply cords are oriented in a radial direction, from one bead over to the other, essentially perpendicular to the direction of rotation. You may also occasionally see RF indicating a run flat tire or ZR indicating a tire that is a speed rating higher than V.
The next number is the diameter code, in inches, of the rim onto which the tire can be mounted. For example, a tire with the P225/70R16 91S would fit a rim with a 16-inch diameter.
Load index can be a confusing subject because there are so many different caveats, but we will try to explain everything here.
The next figure after the rim size in the sequence is your tire’s load index, which tells us how much weight, in pounds, the tire can support when fully inflated: P225/70R16 91S
We call it the load “index” because the number doesn’t tell us the precise number of pounds the tire can carry, at least not by itself. However, the number does correspond to a specific load capacity listed in an index. Beginning with 1 and ending with 150, numbers in the load index represent carrying capacities of 99 to 7385 lbs.
There are two types of load types for passenger tires though, Standard Load and Extra Load. If a tire is Standard Load there will be no markings indicating it but if it is Extra Load the letters XL will appear after the size and load index.
Standard Load Euro-Metric: 215/55R17 94V
Extra Load Euro-Metric: 215/55R17 98V XL
Passenger car tires like P-Metric and Euro-Metric will only have one load index number where LT-Metric and Euro-Metric Commercial (C-Type) will have two numbers separated by a slash.
The first number is the load index if the tire is used in a single application, the second number is the load index if the tire is used in a dual application. Passenger type tires cannot be used in a dual application. Light truck tires will also have a Load Range that is indicated by a letter, such as Load Range E. Load Range is an older term that is still commonly used in the industry so you may hear your tire dealer reference it but the load index numbers are the best way to ensure you have the proper tire.
One important but often misunderstood facet about load index is that the load index numbers between standards organizations (P-Metric vs Euro-Metric) are not necessarily on the same scale. Meaning that two tires in the two different systems that have the same load index number could have different maximum load capacities. This is why it’s important to not only look at the load index number but also verify the actual load capacity.
The final figure in a tire size sequence is the speed rating, which is indicated by a letter: P225/70R16 91S.
Just as your load index number corresponds to a specific load, your speed rating letter corresponds to a particular speed capability based on a standardized laboratory test.
For example, a tire with speed rating “S” is rated for up to 112 mph, while a tire rated “R” is up to 106 mph. Remember that this isn’t a recommended cruising speed. Of course, you should always follow legal speed limits on roadways.
Replacement tires must have the same or higher speed rating as the vehicle’s Original Equipment to maintain vehicle speed capability. If a vehicle has tires with different speed ratings, it is the speed rating of the “slowest” tire that dictates the vehicle top speed.
There is one last sizing type that you should know about, especially if you are in the market for off road tires for a light truck or SUV. It’s called a Flotation size and the numbers in this sizing format are very different from the Metric formats.
Flotation sized tires are similar to LT-Metric tires in application except for a few important points. Number one, they cannot be used in dual applications and number two, an equivalent size tire may have different load capacity than its LT-Metric counterpart.
The first number in the Flotation tire size is the overall diameter in inches. Pretty straight forward.
The second number is the section width (sidewall to sidewall) measurement in inches. Again, fairly simple.
After the section width comes a letter that indicates the type of internal construction: 33X12.50R17LT 120Q.
This is the same as is found in the metric sizing systems.
There are two types of construction that you may see on the sidewall of a tire:
Radial tires are the most common tires on the road in the United States today; thus “R” will usually be shown in the tire size designation.
Radial construction means the tire’s internal ply cords are oriented in a radial direction, from one bead over to the other, essentially perpendicular to the direction of rotation.
The next number is the diameter code, in inches, of the rim onto which the tire can be mounted. For example, a tire with the 33X12.50R17LT 120Q would fit a rim with a 17-inch diameter.
The letters LT will be after the Rim Diameter indicating that this tire type is intended for Light Truck vehicles similar to the LT-Metric and Euro-Metric Commercial (C-Type) tires.
Load Index and Speed Rating have the same meaning and format as the tires using the metric sizing system. Note that since flotation tires cannot be used in a dual application there will be only one load index number instead of two.
Another group of stamping on certain types of tires is the Uniform Tire Quality Grading or UTQG. This grading and stamping is required for passenger car tires (i.e. P-metric and Euro-metric) in the all season and summer categories. Dedicated winter tires, Light Truck (LT-Metric, Euro-Metric Commercial, Flotation) and Motorcycle tires are excluded from this requirement.
Quality grading is designed to make the tire purchase decision easier for you. Ideally, the system is intended to provide simple, comparative data so you can make an intelligent buying decision. However, the ratings are based upon test results achieved under special conditions. This means it’s possible to misinterpret the comparative data as it relates to your individual driving habits, conditions, etc. You should still rely on your service or tire professional for assistance.
Quality grading designates the comparative performance levels of a tire based on government-specified tests but commissioned by the individual tire manufacturers.
All tire manufacturers are required to grade regular and all-season passenger tires in three categories:
UTQG
Treadwear
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course for 6,000 miles (9,600 km). For example, a tire graded 150 would wear one and a half times as well on the government course as a tire graded 100. However actual tire performance depends on driving habits, road characteristics, service practices, and other factors that can influence the outcome.
Traction Grades AA, A, B and C
The traction grades from highest to lowest are AA (the highest), A, B and C. They represent how well tires stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. C-rated tires will have the lowest traction performance.
WARNING: THE TRACTION GRADE ASSIGNED IS BASED ON A WET BRAKING (STRAIGHT AHEAD) TRACTION TEST AND DOES NOT INCLUDE CORNERING (TURNING) TRACTION.
Temperature Grades A, B and C
The temperature grades A, B, and C represent the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the tire’s material to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a performance level all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades A and B represent higher levels of performance on the laboratory test wheel than the minimum required by law.
WARNING: THE TEMPERATURE GRADE IS ESTABLISHED FOR A TIRE THAT IS PROPERLY INFLATED AND NOT OVERLOADED. EXCESSIVE SPEED, UNDER INFLATION, OR EXCESSIVE LOADING, EITHER SEPARATELY OR IN COMBINATION, CAN CAUSE HEAT BUILDUP AND POSSIBLE TIRE FAILURE.
DOT Quality Grades
All passenger car tires must conform to other federal requirements in addition to these grades.
Learn about our mission, our achievements, and our ongoing commitments
Read Our Origin Story
Tire size can be confusing. Some numbers on the sidewall are listed in millimeters while others are inches. Plus, the right size for your car, truck, or trailer can differ depending on where and how you drive.
You can see your original equipment tire size in your owner’s manual or on the placard generally located on the driver’s side door jam. This is the sizing recommended by the vehicle manufacturer.
If you’re interested in switching out your tires for a different look or performance, a good place to start is the numbers and other indicators on your existing tires’ sidewall. Next, have a tire professional help you determine a tire size range that will fit your vehicle and driving needs.
Here’s what those numbers and indicators on the sidewall indicate and how to understand them:
A: TIRE TYPE The first letter in the code tells you what class of tire it is.
P stands for passenger vehicle tire. P-class tires include cars, SUVs, crossovers, minivans and smaller pickup trucks.
LT means light truck tire, designed for vehicles that are capable of carrying heavy loads, towing trailers, or for those looking for an extra heavy duty option. These are often equipped on three-quarter or 1 ton trucks and SUVs.
ST stands for Special Trailer. These tire sizes are meant for trailers, including fifth wheels and other travel trailers, as well as boat and utility trailers.
If there’s no letter before the first number, you have a metric tire most commonly referred to as European size. It’s also measured in millimeters but may have a different load capacity than a P or LT tire.
B: TIRE WIDTH The three-digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. This may also be referred to as the section width.
C: ASPECT RATIO The forward slash separates the tire width number from the two-digit aspect ratio. The bigger the aspect ratio, the higher/taller the tire’s sidewall, or “profile” as it’s sometimes called.
The aspect ratio is indicated on the tire sidewall as a percentage. It’s the height of the sidewall measured from wheel rim to top of the tread, expressed as a percentage of tire width.
In this example, the aspect ratio is 65, meaning the sidewall is 65 percent as high as the tire is wide. To get the sidewall height, take the tire width of 215 mm and convert it to inches (8.46). Then multiply this by 65% (.65). This gives you an answer of 5.5, the sidewall height in inches.
D: CONSTRUCTION TYPE This single letter tells you about the internal construction of the tire.
R is for radial tires, the industry standard for most tires today. They have better road grip, lower rolling resistance for better gas mileage, ride comfort and durability than previous generations of tires. In a radial tire, the plies — layers of strong cords made of a blend of polyester, steel and fabric and coated with rubber — are laid perpendicular to the direction of travel.
D is for tires built with diagonal (crisscrossed) plies, called bias-constructed tires. They are also called conventional, x-ply, or cross-ply tires. Some motorcycle and trailer tires still use this internal construction.
Some run-flat tires are identified with an F followed by the type of internal construction.
E: WHEEL DIAMETER This two-digit number specifies wheel diameter in inches. It’s the distance between the two bead seat areas (where a tire gets tightly sealed onto the wheel).
F: LOAD INDEX The two-digit or three-digit number that follows the gap specifies tire load index.
The load index symbol indicates how much weight a tire can support, based on the following standard chart. In our example, the load index is 89, which indicates the tire has a load capacity of 1,279 pounds, when inflated to the tire’s maximum air pressure rating.
G: SPEED RATING The last letter is the tire speed rating. This indicates the top speed it’s safe to travel at for a sustained amount of time. A tire with a higher speed rating can handle heat better and provide more control at faster speeds. The maximum operating speed of a vehicle is no more than the lowest speed rating of all tires mounted on the vehicle. (Of course, you should always abide by speed limits for safer driving.) Speed rating is usually, but not always, a single letter (see the chart).
Below you will find several charts that will help you understand tire sizing numbers, including a load index chart and speed rating chart.
A tire size calculator is a quick way to see whether the tire size you’re considering will likely fit your car, SUV, sports car, light truck or crossover.
But remember that is only an estimate. It’s important to stay within the sizing tolerances of your vehicle. Tires that are the wrong size could cause some pull in the steering wheel, rub against the suspension or body of your vehicle, reduce clearance on hills, or result in a stiffer or noisier ride.
If you’re considering mounting a different tire size on your vehicle, check with a tire expert. Find out whether the tires and wheels you have your eye on are the right fit for your vehicle’s suspension, gearing, and bodywork. And ask how any differences in revolutions per mile, tire speed, load index, and speed rating will affect your ride quality and vehicle performance.
See how new tires and rims will look on your car or truck using our Virtual Wheels simulator, available at any Les Schwab.
Find Your Store
Business
Tire marking
and tires
Registration in the Chestny ZNAK system is a necessary requirement
for all participants in the circulation of labeled products
To come in
Register in the Chestny ZNAK system and go through all the necessary steps to prepare your enterprise for marking, depending on the type of participation of your organization.
The steps are accompanied by detailed instructions and video tutorials. nine0003
Code recommendations
To ensure the necessary contrast between the background and the image of the symbol in order to guarantee its reading and recognition, the size cannot be reduced. free zone. The most preferred methods of applying means of identification, when a black Data Matrix character is imprinted in a white area, highlighted in the design. In the production of primary packaging / labels / stickers with plotted with Data Matrix symbols, it must be taken into account that the execution technological operations such as varnishing, laminating, after applying the marking symbols to the surface of the primary packaging/labels/stickers, may degrade characters Data Matrix to the level that prevents the introduction of marked goods into circulation.
nine0003
Application for posting information about the customs and logistics warehouse
Product groups Selected: 0
Milk
Water
Medicines
Tabak
Light industry goods
Shoes
fur coats
Perfumes and toilet water
Tires and pneumatic tires
Cameras and ramps
Pivo
bicycle
BAA
Antiseptics
Medical devices
Publish on the site
Customs Directorate
North-West Customs Administration
Siberian Customs Administration
Far Eastern Customs
Kaliningrad Regional Customs
Southern Customs
Central Customs
Central Activity 9000
Moscow Regional Customs
Turkey
Republic of Belarus
Latvia
Poland
Estonia
Other
Customs Administration
Location
Turkey
Republic of Belarus
Latvia
Poland
Estonia
Other
Location
Goods
Excisable goods
Excisable goods
Transportation services
Road
Sea
Rail
Air
Multimodal
No transportation service
Code method
Manual
0
By pressing the button, you agree to receive information and offers from Chestny ZNAK.
Acquainted with privacy policy
Thank you! Your application has been successfully sent!
nine0000 what to mark, how to take into account - read on the Inter ID websiteArticles
12 December 2020
Sergey Kotov
From November 1, 2020, mandatory tire and tire marking will start in Russia. Now manufacturers and importers will have to apply the Data Matrix barcode received in the Chestny ZNAK system to all products, and wholesalers and retailers will have to transfer information about incoming or sold goods to the system. Exceptions are made in cases where unmarked tires were purchased before November 1st. Distributors, dealers and retailers will be able to sell them until mid-December. Storage of unmarked tires is possible until March next year. nine0003
The primary marking medium is 2D DataMatrix barcodes printed on self-adhesive labels. The location of the labels themselves is not regulated: most often, this is the tread or side of the tires.
When aggregating goods (in boxes, pallets), the GS1 128 line code can be used. This code is applied to the general container, however, tires and tires must still be marked with the DataMatrix code.
Also in the Chestny ZNAK system, additional (in addition to labels) marking of tires and tires with RFID tags is allowed. nine0003
The Chestny Znak website states that the marking code cannot be printed on transparent wrapping film or other wrapping material, and the recommended label size is at least 20x20 mm.
At the same time, please note that:
Accordingly, the following requirements can be made to labels for marking tires and tires:
Polypropylene labels with a reinforced adhesive layer meet these requirements most fully. They are almost impossible to tear, they are not afraid of moisture, the image on them does not wear out and lasts a very long time. nine0003
Semi-gloss labels are suitable in some cases, but are more sensitive to mechanical stress and moisture.
Inter ID manufactures and supplies self-adhesive labels and ribbons for printing on thermal and thermal transfer printers. You can learn more about what consumables for label printers are, what they are made of and what properties they have, from this article. An online calculator on our website will allow you to calculate the approximate cost of manufacturing a batch of labels. nine0003
Tire marking with DataMatrix codes requires a thermal transfer label printer.
High-volume printing (manufacturers, large importers) requires an industrial-grade printer that can withstand a daily load of tens of thousands of labels and can print very quickly.
Modern models are often equipped with a touch screen, which simplifies operation. Let's take TSC MB340, Zebra ZT410/ZT411, Honeywell PX940, Godex ZX1300XI printers as examples. nine0003
If the load is relatively small, you can choose a desktop printer - Zebra ZD620, Godex G530, TSC TE200 and other similar models.
It will be important to buy accessories that will make marking easier. So, printed labels can be immediately rolled into neat rolls using external winders (Rewinder Godex T10, SB Zet SMT-01). A small roll can then be placed in this manual label applicator.
Data collection terminals (TSD) and barcode scanners with a 2D reader will allow you to check the correctness of tire marking, as well as enter product data into the Chestny ZNAK system. nine0003
For warehouse, manufacturing, or large retail applications, the Zebra MC3300 and Honeywell CK65 Android-level TSDs are ideal. More expensive TSD for a warehouse are Zebra MC9300 series terminals, more affordable - Atol Smart.
Pro. Models such as the Zebra TC26 or CipherLab RS51 are geared towards the mobile workforce, but can also be used in warehouses with rugged protection and pistol grip accessories.
Zebra DS2208/DS2278, Honeywell Voyager 1470G2D/XP 1472G2D will be universal scanners for tagged tires. Models of other popular brands are also available, including UROVO, DataLogic, Mertech. nine0003
One or two-finger Bluetooth scanners are used with data collection terminals or wearable computers. Compact and lightweight, they are designed to increase productivity.
Radio frequency identification (RFID, Radio Frequency Identification) will simplify accounting for tire manufacturers, suppliers, dealers, service centers. For example, RFID tags can be detected and recognized, that is, read, without line of sight, from a distance of several meters and up to several hundred at a time. In addition, additional information (user data) can be written to the tags - when reading it, it will also appear in the accounting system.
nine0003
Finally - and this is especially true for tire products - RFIDs can be installed inside the product, ensuring their greater (compared to barcodes on labels) safety during transportation, acceptance, shipment or storage. By the way, many tags have reliable protection against mechanical impact, moisture, chemicals, temperature changes.
Inter ID offers a wide range of body and roll tags. nine0003
A good example of a "tire" RFID tag is the Confidex TireLabel. It is a passive identifier that is optimized for strong dielectric applications and has a range of two to four meters.
Confidex TireLabel are supplied in rolls. Each tag has an acrylic adhesive for low surface energy plastics on the underside. The top side is suitable for thermal transfer printing (that is, you can add a barcode or other information).
Confidex tags can be bent. They also withstand salt water, engine oil, acids and alkalis. The temperature of use is from -35° to +85°C.
nine0003
To write and read RFID tags, use:
Tire inventory by RFID tags is performed in specialized software. At Inter ID, we have developed the Union EAM software package, which consists of versions for PC and Android. nine0003
Among its capabilities:
The program also works with barcodes. Data exchange with external accounting systems (1C, SAP) is possible through Excel tables, xml files, REST API.
Read more about Union EAM in our article.
