Technical repair standard

I-CAR Repairability Technical Support Portal

*Results are compiled from matches in OEM Partial Part Replacement, OEM Restraints System Part Replacement, and OEM Hybrid and Electric Vehicle Disable. Use the search bar at the top of the page to find relevant Collision Repair News articles.

What does the vehicle maker say?

The information that matters.

Does it need to be calibrated?

Can that part be sectioned?

What parts need to be replaced?

Where's the high-voltage disable procedure?

What are the OEM glass requirements?

What's the best practice for repairs?

How do you navigate the RTS portal?

Have a collision repair question?

Army Repair and Return - S&K Logistics Services

Employee Portal

U. S. Army prime contract: W91CRB-16-D-0007
U.S. Army prime contract: W91CRB-19-D-0028

The U.S. Army has contracted with S&K Logistics Services for management services to sustain a broad range of standard and non-standard components of military end-items owned by Army Foreign Military Service (FMS) Customers.

The quotes submitted shall in no way obligate S&K Logistics Services for work performed. After a mutually acceptable agreement, S&K may issue Repair Orders for work to be performed on the items quoted.

NOTE: Vendors MUST review the Quote Requirements listed below PRIOR to submission.

Download RFQ Listings (CSV file)

Submit Quotes and Documents to: ArmyR&[email protected]

REPAIR SOURCE QUALIFICATIONS

Must provide proof of successful repair history:

Invoices, redacted contract showing Part Number/NSN
Similar Item, provide explanation and provide invoice or contract
SOF/CSI must be repaired by the ESA Approved Source, OEM or OEM repair Source.
ISO 9001, AS9100, and other applicable certifications.

INITIAL BID SUBMISSION

Must provide the following:

Evaluation Fee and Turnaround Time
Average Repair Price and Turnaround Time
Any historical information on Over and Above
Provide Cage Code and Shipping Address
Price Justification
With your quote, please state if your repair facility is certified with ISO 9001 or AS9100 Quality Management Systems requirements for aviation, space and defense organizations and supplemental requirements imposed by this contract. If not, please state your current quality certification.
ANTI-LOBBYING CLAUSE FAR 52.203-12 Signed Statement (applicable over SAT):
- The offeror, by signing its offer, hereby certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress on its behalf in connection with the awarding of this contract.
- If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

WARRANTY

All units require a 1-YEAR WARRANTY on repairs.

A Salish & Kootenai Tribally Owned Business

Library of technical documentation

Designation	Introduction date	Status
GOST-283 Maintenance and repair system Basic provisions	01.01.1984	Valid
Scope: This standard establishes the purpose and composition of the set of standards "System for the maintenance and repair of equipment" (STOIRT) and the rules for designating related state standards. The complex of standards STOIRT is intended for normative support of the system of maintenance and repair of equipment. nine0010
GOST 18322-78 Equipment maintenance and repair system. Terms and definitions	01.01.1980	Replaced by
Scope: The standard establishes the terms and definitions of basic concepts used in science, technology and production in the field of types, methods and indicators of maintenance and repair of products. The terms established by the standard are mandatory for use in all types of documentation, scientific and technical, educational and reference literature. nine0026 Replaces: GOST 18322-73 “Maintenance and repair system for equipment. Terms and definitions»
GOST 20334-81 Maintenance and repair system for motor vehicles. Indicators of serviceability and maintainability	01/01/1983	Valid
Scope: semi-trailers for regulated operating conditions. nine0026 Replaces: GOST 20334-74 “System of maintenance and repair of automotive equipment. Operational manufacturability indicators and evaluation procedure»
GOST 20793-86 Tractors and agricultural machines. Maintenance	01/01/1988	Superseded by
Scope: This standard applies to all agricultural tractors, self-propelled chassis and agricultural machines in use. nine0026 Replaces: GOST 22870-84 “Technical diagnostics. Agricultural tractors. Diagnosis rules” GOST 20793-81 “Tractors and agricultural machines. Maintenance”
GOST 20831-75 Maintenance and repair system. The procedure for assessing the quality of repaired products	07/01/1976	Valid
Scope: The standard establishes the procedure for assessing the quality of repaired engineering products that are commercial products of the enterprise.
GOST 20857-75 Equipment maintenance and repair system. Procedure for collecting and recording information	07/01/1976	Replaced by
Scope: The standard establishes a unified procedure for collecting and recording information on maintainability, manufacturability during maintenance and repair manufacturability of engineering products. nine0010
GOST 21623-76 Equipment maintenance and repair system. Indicators for assessing maintainability. Terms and definitions	01.01.1977	Valid
Scope: The standard establishes terms and definitions of concepts in the field of indicators for assessing the maintainability of products in all industries that are objects of maintenance and repair.
GOST 21624-81 Maintenance and repair system for motor vehicles. Requirements for operational manufacturability and maintainability of products	01.01.1983	Valid
Replaces: GOST 21624-76 “Automotive maintenance and repair system. Requirements for the operational manufacturability of product designs»
GOST 21758-81 Maintenance and repair system for automotive vehicles. Methods for determining indicators of operational manufacturability and maintainability during testing	01/01/1983	Valid
Replaces: GOST 21758-76 “System of maintenance and repair of motor vehicles. Methods for determining the indicators of operational manufacturability during testing”
GOST 23660-79 Maintenance and repair system for equipment. Maintenance of maintainability in product development	07/01/1980	Valid
Scope: The standard establishes general rules and procedures for ensuring the maintainability of products of all industries that are objects of maintenance and repair, at all stages of their development.
GOST 24408-80 Maintenance and repair system for construction machines. Rules for handing over for overhaul and issue from overhaul of machines and their components. General requirements	01/01/1982	Valid
Scope: The standard establishes general requirements for construction machines and their components handed over for overhaul and returned from repair, as well as the procedure for handing them over for repair and issuing from repair.
GOST 24826-81 Maintenance and repair system for construction machines. The procedure for carrying out work on assessing the quality of repaired construction machines	01.01.1982	Expired
Scope: The standard establishes the procedure for assessing the quality of overhauled construction and road machines and their components, which are commercial products of the repair contractor.
GOST 25826-83 Industrial tractors. Maintenance	01.01.1985	Valid

GOST 26679-85 Maintenance and repair system for construction machines. Motor graders and their components handed over for overhaul and issued from overhaul. Specifications	07/01/1987	Introduced for the first time
Scope: The standard applies to motor graders of domestic production of light, medium and heavy types and their components. The standard does not apply to motor graders multi-engine, four-axle, with active bodies and special purposes. The standard establishes technical requirements for motor graders and their components handed over for overhaul and issued from repair. nine0010
GOST 27792-88 Automatic rotary and rotary conveyor lines. Maintenance and repair	07/01/1989	Introduced for the first time
Scope: The standard establishes the procedure for carrying out and standardizing the indicators of maintenance and repair of automatic rotary and rotary conveyor lines.
GOST 28470-90 System for maintenance and repair of technical means of computer technology and informatics. Types and methods of maintenance and repair	07/01/1991	Introduced for the first time
Scope: The standard applies to technical means of computer technology and informatics (hereinafter - TS VTI) and establishes requirements for the types and methods of maintenance and repair of TS VTI in a set of standards.
GOST R 56935-2016 Production services. Services for building a monitoring system for automatic fire protection systems and outputting signals to the centralized monitoring console "01" and "112"	01.01.2017	Introduced for the first time
Scope: The standard establishes the procedure for the design, installation, commissioning and provision of services for diagnostics, maintenance, repair and performance monitoring of automatic fire protection systems and signal output systems to the centralized monitoring console "01" and "112". The provisions of this standard apply to legal entities of all forms of ownership and individuals providing services for the design, installation, commissioning, diagnostics, maintenance, repair and monitoring of the operability of the system for outputting signals to the CMS "01" and "112". The provisions of this standard also apply to fire departments, organizations of the federal fire service of the Ministry of Emergency Situations of Russia authorized to receive messages about fires by a telephone number designated by the federal executive authority in the field of communications, as well as to EDDS operating on the basis of the telephone "112" in part placement and operation of the monitoring station as an integral element of the monitoring system. nine0010
GOST R 56936-2016 Production services. Technical security systems. Stages of the life cycle of systems. General requirements	01.01.2017	Introduced for the first time
Scope: The standard establishes uniform requirements for the list, sequence and main content of production services at the stages of the life cycle, common to all technical security systems of industrial and civil protection objects . The standard applies to works and services for the creation of technical security systems, including the following installations, complexes, systems and technical means for ensuring the safety and life support of an object. nine0010
GOST R 57329-2016 Industrial automation systems and integration. Maintenance and repair systems. Terms and definitions	06/01/2017	First introduced
Scope: The standard establishes the basic terms and definitions used in maintenance and repair work, while covering technical, organizational and managerial aspects. The terms established in the standard cannot be used for software maintenance. nine0010
GOST R 57330-2016 Industrial automation systems and integration. Maintenance and repair systems. Key performance indicators	06/01/2017	Introduced for the first time
Scope: The standard defines a system of key technical and economic indicators for measuring maintenance and repair indicators from an economic, technical and organizational point of view, as well as for evaluating and improving production efficiency and achieving the optimal state of maintenance and repair facilities. nine0010
GOST R 57369-2016 Production services. Terms and definitions	07/01/2017	Introduced for the first time
Scope: The standard establishes the terms and definitions of the basic concepts used in the field of production services for use in all types of documentation and regulatory documents included in the scope of production services , including in the field of fire safety or applying the results of these works (services). nine0010
GOST R 57839-2017 Manufacturing services. Technical security systems. Design assignment. General requirements	06/01/2018	Introduced for the first time
Scope: The standard establishes the composition, content and design, the procedure for developing, agreeing and approving a task for the design of technical security systems in accordance with GOST R 56936. The requirements of the standard apply to tasks for designing for newly created technical security systems, as well as for previously built systems during their reconstruction and overhaul. nine0010
GOST R 57974-2017 Manufacturing services. Organization of performance testing of systems and installations of fire protection of buildings and structures. General requirements	05/01/2018	Refurbished
Scope: The standard establishes requirements for the organization of performance checks of systems, fire protection installations and their elements put into operation and operated in buildings and structures (hereinafter referred to as the object of protection) (hereinafter referred to as PPP systems). The requirements of the standard apply to the organization of performance testing of the following PPP systems: - automatic fire extinguishing installations; - autonomous fire extinguishing installations; - autonomous fire extinguishing devices; - automatic fire alarm; - warning and evacuation control systems; - smoke protection systems; - internal fire water pipelines; - ladders of firemen external stationary and protections of a roof; - means of fire protection. nine0010
GOST R 58202-2018 Production services. Personal protective equipment for people in case of fire. Norms and rules of placement and operation. General requirements	02/01/2019	Refurbished
Scope: The standard establishes requirements for the standards for equipping, placing and operating personal protective equipment for people in case of fire in buildings and structures at the stages of design, equipping, placement, operation and withdrawal out of operation. The provisions of the standard do not apply to buildings for special purposes (for the production and storage of explosives and explosives, military purposes, mine workings). nine0010
Letter 19-2-3-186 on the application of GOST R 58202-2018	01/22/2019	Information document

R 50-57-88 Procedure for acceptance of devices for repair and issuance out of repair	07/01/1988	Introduced for the first time
Scope: The recommendations establish the recommended procedure for receiving devices for repair and issuing them from repair at enterprises of the USSR State Standard system. nine0010
RD 50-204-87 Guidelines. Reliability in technology. Collection and processing of information about the reliability of products in operation. Basic provisions	06/24/1987	Canceled in the Russian Federation
Scope: Guidelines establish the main provisions for the collection and processing of information on the reliability of national economic equipment at the operational stage. The guidelines are intended for development organizations, manufacturers and consumers of equipment and repair organizations. nine0026 Replaces: GOST 20857-75 “Maintenance and repair system for equipment. Procedure for collecting and recording information” GOST 17526-72 “Reliability of engineering products. Information collection and processing system. Requirements for the content of forms for accounting for operating time, damage and failures” GOST 19490-74 “Reliability of engineering products. Information collection and processing system. Forms of accounting for the results of processing operational information” GOST 20307-74 “Reliability of engineering products. Information collection and processing system. Product Failure Report" RD 50-204-80
... A list of organizations that have a significant impact on industry and trade sectors	07/07/2015	is not determined by the legislation

... List entities with a significant impact on industries and trade	13.04.2015	Valid

Valkoinen apartment renovation and construction standards

Interior and exterior decoration of the dwelling becomes unusable after some time. Whether it is a house or an apartment, the rate of degradation of materials and coatings remains constant. Our experts are ready to make a good repair. It can be "cosmetic" when you need to paint the floor and baseboards, replace the wallpaper. There is another option: "capital" - carrying out complex work. We use Russian and European repair standards. We take the best of both systems.

What is renovation

Strict acceptance rules

According to Russian regulations, developers put housing into operation with laid communications, with a rough or fine finish. Usually a basic set of plumbing is installed in the bathroom, and a sink is installed in the kitchen. Cover the flooring. In this form, the property is transferred to the owner for acceptance.

In Europe, it is customary at the first stage to show the customer "bare walls" without plaster, communications and plumbing. This makes it easier to notice and evaluate defects. nine0460

Russian standards allow deviations from the norm much larger than European ones. Therefore, we take as a basis the documents developed for the European Union. DIN EN 18202 states that the angular deviation cannot exceed 8 mm per 3 m plane. In the Russian Federation, this value can be multiplied by 2.

The same situation with the corners of the walls. Domestic standards allow deviations, and European ones set the exact value - 90 ° for square and rectangular rooms.

There are rules for electricians. In EU countries, it is necessary to install one machine for two light bulbs or sockets in the electrical panel. Domestic standards do not regulate the number of traffic jams.

European standards

Finnish quality

In 2014 Valkoinen Construction became Russian. But we continue to use Finnish and European standards in our work on a voluntary basis. Here is the list of regulations:

European Union Regulations

In addition to Finnish standards, in some cases we use Swiss, German and Austrian standards.

Examples of documents

As in the best houses in Europe

We offer you to get acquainted with the list of construction and repair quality standards. Let's start with the main ones.

ÖNORM DIN 18202

"Tolerances in building construction - buildings and structures"

SIA V414/10

"Tolerances in building construction"

Below are the general rules. nine0460

DIN 18202

"Tolerances in high-rise construction - buildings and structures"

ÖNORM DIN 18202

"Plaster and plaster layers"

Now we give examples of standards related to plaster work.

EN 13914-2

"Calculation, preparation and execution of external and internal plastering works"

EN 15824

"Internal and external plasters with organic binder"

DIN 18550

"Plaster and plaster systems"

Let's note the Swiss documents. On the first floors in houses with a cold basement, you need to insulate the floors. SIA 251 gives a clear idea of how to cast floating screeds. They are mounted not on a concrete base, but on an intermediate layer of insulation. If you need to equip a floor covering on a large area with heavy traffic, we are guided by SIA 252 - “Industrial floor coverings”.

Specify the standards for floor screed. The main one is the German DIN 18560 called "Screeds in construction". In the work we use parts 1-4, 7 of the document. Without good materials, a decent coating will not work. Therefore, we take as a basis DIN EN 13813. Official name: "Solutions and compositions for the installation of screeds, screeds." It will not be superfluous to know technical terms. DIN EN 13318 is responsible for their explanation.

In Austria, no less up-to-date documents are issued. For example, ÖNorm B 2232. It shows the steps for forming screeds. In cold climates, in addition to radiators, you can install a system of underfloor heating. The compilers of ÖNorm B 2242-4 explain how to do this correctly.

Let's imagine the European standards of apartment renovation related to electrics. German DIN 18015 with the designation "Electrical installations in residential buildings":

Part 1 - from 05.2020
Part 2 - dated 11. 2010
Part 3 - from 09.2016
Part 4 - from 05.2014
Part 5 - from 07.2015

Regulations are not published in the EU in the public domain. They are developed by commercial structures. Therefore, they are distributed on a paid basis. To receive the current text of DIN 18560 in electronic format, you need to pay at least 77 euros. nine0460

Would you like to know more about what standards we apply in a particular type of work? You can ask our project managers and foremen.

Ask a question

Russian standards

Legality of technical documentation

Since the beginning of the 2000s, most of the RF regulations have been finalized to ensure compatibility with European documents. But there are also specialized national standards. SNiP that have lost their legal force are changed to the current SP. nined. This technical regulation ensures safety for buildings and structures.

There is a set of rules that can be used to control plaster work. This is SP 71.13330.2017. Specify the parameters of the standard in the table.

These parameters are close to the European standards for apartment renovation. They can be used to get the job done. The result will be worthy.

Examples of standards

Russian quality

The main document in the private sector is GOST R 52059-2018. This is a national regulation that regulates the standards of construction and repair, when it comes to individual orders.

There are other standards related to reliability, electrical, finishing materials.

joint venture 76.13330.2016

“Electrical devices”

GOST 27751-2014

“Reliability of Construction structures”

SP 71.13330.2017

“Insulation and finishing coatings”

9, . nine0460

joint venture 64.

Hyundai	Does Hyundai have a sectioning procedure available?
Kia	Does Kia have a sectioning procedure available?
Chevrolet	Does Chevrolet have a warning against sectioning when there is no procedure?
BMW	Can I-CAR send me BMW repair procedures?
Honda	What does Honda say about repairing damaged airbag system wiring harnesses?
Hyundai	Does Hyundai have part replacement procedures available?
Mercedes-Benz	Can I-CAR send me Mercedes-Benz repair procedures?
Honda	What does Honda say about straightening front lower rails?
Subaru	Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan	Is there a wiring repair procedure for the airbag connector?

	What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
	What does I-CAR say about straightening a kink?
	Can I-CAR General Sectioning Guidelines be used?
	What does I-CAR say about repairing damaged door intrusion beams?
	What does I-CAR say about the decision to use recycled parts?
	What does I-CAR say about replacing suspension parts in pairs?
	What does I-CAR say about repairing damaged bumper reinforcements?
	What does I-CAR say about repair tolerances?
	What does I-CAR say about using recycled airbags?
	What does I-CAR say about repairing damaged crush boxes?