Tire technician tools

ESC-10543

Esco 10543 Calcium, Liquid Transfer Pump

$1,285. 00

Tire Fitter's Handbook | Technobook

9000

Tire calculator 2

Nut tightening torques Wheel weights

Tire pressures 1

Tire pressure 2

Tire pressure 3

Truck tire pressure

Typical technological processes of tire fitting, wheel balancing, tire and tube repair

Warranty obligations

Workflow technology for tire fitting

Documentation workflow

information

Normative documentation

Tire Fitter's Handbook

On this page you will find all the necessary information for a tire shop, including the technology for performing tire fitting work - a typical technological process for removing the installation of wheels, a typical technological process for tire fitting, a typical technological process for balancing wheels, a typical technological process the process of repairing local damage to tires and tubes, reference information on tire dimensions and designations. Tire marking, car tire pressure reference books, wheel nut and bolt torque references, tire calculator, data on truck tires and wheels including load indices, pressure, wheel nut tightening torques, tire applicability on different brands of cars, trucks, buses and trailers to them. Also here you will find information about the requirements for warranty obligations for the repair of tires and tubes, lists of regulatory documents necessary for a tire shop. Here you will also find our training information for tire specialists including presentations and video courses. You can get paid access to the technology and workflow programs of a car service. Everything and in one place! nine0003

• We invite you and your employees to courses for tire fitters.

• We can prepare and carry out the certification procedure for your tire service with the involvement of state certification bodies in the shortest possible time and with a guarantee.

• We will offer you equipment for your tire shop.

Contact phone: 8(044) 77-88-907

Courses for tire fitters, training in tire fitting, wheel balancing, repair of local damage to tires and tubes

LIST OF EQUIPMENT FOR TIRE MOUNTING (equipment of a tire shop):

EQUIPMENT for tire fitting

• balancing stands

• tire changers

• wheel straightening equipment

• tire lifts

• cranes and trolleys for truck tires

• compressors

• air hoses

• air handling units

• nitrogen plants

• safety stands

• wheel chocks

• jacks

• magnetic plates for nuts

• trolley for wheels

• washer and dryer for wheels

• sprayers and bathtubs

• tire racks

• waste containers

• side expanders

• vulcanizers

• safety cages

• local exhaust ventilation

CONSUMABLES

• vulcanizing liquid

• adhesives

• sealing pastes

• bead paste

• hand paste

• valves and spools

• adhesive weights

• rammed weights

• patches of all kinds

• spools

• nipples

• wheel covers

• disposable gloves

TECHNOLOGY and DOCUMENTATION

• torque manuals

• tire pressure manuals

• typical technological process

• equipment maintenance procedures

• orders

• instructions for OT

• register of oral applications

• certificate of completion of work / coupon

• price lists

• safety plates

  nine0054

• signs with the name and mode of operation

• labor protection corner

• customer information stand

• testing of lifting equipment

• normative documentation (package) STB, TKP, GOST

SPECIAL TOOLS

• carrying lamps

• locksmith tool set

• brushes

• harness installation kits

• patch kits

• Mushroom installation kits

• tire inflation guns

• lock release kit

• thread restoration kits

• power head sets

• nutrunners and crosses

  nine0054

• valve tightening tool

• pneumatic grinders

• weight hammer tongs

• knives

• Stuck Remover

• awl

• scraper

• Patching tool

• brushes for applying glue and paste

nine0051

dryer for drying patches and heating discs

MEASUREMENTS

• tire gun pressure gauge

• torque wrenches

• Caliper

• metal ruler

• compressor gauges

• pressure gauges for air handling units

To order equipment, leave a request, call or come to our office:

Minsk, Nekrasov St. 5, office 201

Call us!

(017) 290-20-35

+375(44) 77-88-907

VIEW EQUIPMENT

Easy Gripper Crane Module B

Scroll

Professional mobile tire changers with truck cranes

Unique 3-point grip

Quick wheel change. High security.

OTR/EM and AGRO Tire Mobile Service

The Easy Gripper product range is designed to help tire professionals in a variety of conditions and situations. Using the Easy Gripper allows you to manage tires faster and safer while preventing damage to tires, rims and equipment. nine0003

Mounted on a truck crane, the Easy Gripper provides optimum flexibility, allowing the driver to both transport and mount large tires and OTR or AGRO wheels - and even with one hand.

With capture, very risky and time-consuming situations become safe and easy.

Capabilities

Clamps working range Ø2.400 mm, lifting capacity 2 tons. With a grip length of 550mm, this wheel puller can handle tires up to 37.25R35. When working with wheel assemblies as well as dual wheels, the wheel puller can be used for tires up to 24.00R35, depending on the type of tires and rims. nine0003

If you do not handle complete wheel assemblies over 1 ton and a grip range of Ø2.160 mm, you can opt for a configuration with our Easy Gripper 2160, where on request we can also increase the grip diameter to Ø2.400 mm to handle even the largest AGRO tires.

Standard features

• Handles both Easy Grippers 2160 and 2400-2T.

• Unique and secure 3-point grip
  Avoid accidents. nine0442

  • LED task light (2400-2T only)

  • Integrated IR camera for optimal visibility
    Automatic activation of IR function in low light.

  • Anti-slip replacement grips
    Flat grip (lever) for working in narrow spaces.
    Telescopic grippers for working with twin wheels.

  • Tire ring safety tools
    to help tire workers with difficult and dangerous work.
    Easily attaches to the end of grip tubes.
    Can press on the tire and hold and place rings.

  • Customization

  Downloads

  Brochure

  Contact us

  Request more information

  Phone: +45 72 344 344

  Safe 3-point grip

  Unique 3 position grip for optimum grip and control when working with tires and wheels. Combined with precise pan and tilt functions, you can avoid heavy and dangerous work, as well as damage to tires, rims and equipment.

  Quick change and remote control

  The Easy Gripper Crane Module mounts quickly and easily on a truck crane with a quick change system. In addition, the remote control system can be easily integrated into the crane control system. nine0003

  Narrow space solution

  Limited clearance around tires and fenders can be quickly resolved. With just one bolt loosened, the top tube can be replaced with a flat top arm, and the two down tubes will carry the tire under the fender.

  Lightweight and compact The

  Gripper has a lightweight and compact design to optimize the center of gravity and load capacity of the crane and the entire solution. The crane module gives the configuration a tilt function of up to 180°.

  Wheel puller specification

  Easy Gripper Wheel Puller 2160

  Clamp diameter: 700 - 2.160 mm (28 - 85")
  Standard tubes: Ø89 x 600 mm (3.5 x 24")
  Load capacity: 2.2004 kg (6) lbs. Weight: 905 kg (1.995 lb)
  (A) CoG Total block: 785 mm (31")
  (B) Gripper face: 1.280 mm (50")
  (C) CoG load: 1. 780 mm (70")

  Easy Gripper 2400-2T

  Clamp diameter: 850 - 2.400 mm (34 - 94")
  - with special handles up to: 1.080 mm (43")
  Standard pipes: Ø115 x 650 mm (4.5 x 26")
  Load capacity: 2.000 kg (4.400 lbs)
  Weight: 1.110 kg (2.447 lbs)
  (A) CoG Total unit: 900 mm (35")
  (B) Gripper face: 1.330 mm (52")
  (C) CoG Load capacity: 1.880 mm (74")

  Specifications

  Mounting insert: Special for faucet
  Load capacity: Individual calculation
  Power supply: 12/24 V

  Hydraulic

  Flow: max. 50 liters/min

  One or preferred two hydraulic proportional valves to control the crane module and grapple.

  Auxiliary tools and accessories

  While the Easy Gripper is an incredible tire changer, it can't do all the tire changing work on its own. That's why we offer you the following high quality tools and accessories to support other parts of your tire fitting process.

  ---

  Learn more

  • 
    What is a tire plug
  • 
    How to make your body tired
  • 
    How to do front alignment for 110 atv
  • 
    How wide are tires
  • 
    How fast does a 110cc atv go in mph
  • 
    How to change a split rim truck tire
  • 
    How long are atv trails open in wisconsin
  • 
    Plug kit for tires
  • 
    Popped tire repair
  • 
    Tyre puncture mechanic near me
  • 
    How tall is a 295 55r20 tire