While often forgotten about, wheel balancing is a valuable service that is necessary for the consistent performance and efficiency of your car. There are a number of things that can cause a car’s wheels to lose balance, with lost wheel weights caused by sudden impacts or damaged suspension components being among the most common reasons
If you wish to see whether your wheels need balancing just search for your local ATS Centre. We have over 250 across the UK so you can find one near you.
Wheel balancing involves matching the combined weight of the wheel and tyre so that it is even on the axle ensuring that it rotates efficiently at high speeds. This is done by counter-balancing the weight bias by placing tiny weights at specific points around the wheel.
ATS Euromaster recommends having your wheels checked or balanced every 10,000 miles or after suffering an impact from a kerb or pothole. We use the latest technology in centres to ensure wheels are balanced as accurately as possible to the nearest gram.
We make sure every new tyre bought at ATS Euromaster is balanced properly before you leave.
See all our available tyres.
Wheel balancing costs £9 per tyre and can be carried out across our network of over 250 centres. If you wish to book an appointment to have wheel balancing carried out you will need to find your nearest ATS Euromaster. You cannot book an appointment online and will need to do so by phone.
Find your local ATS Euromaster
An imbalanced wheel can cause a number of changes to your car’s characteristics, most of which are easy to spot. These changes can include:
Loss of wheel weights is the primary cause of poorly balanced wheels because it means that the wheels no longer have an even weight distribution.
Wheel weights can become lost from a sudden impact on the wheel, this is often enough to knock the weights out of place, and lose their balance.
Even though wheel balancing is a common procedure that can be required any number of times during the period you own the vehicle, the effects of imbalanced wheels can end up costing you money unnecessarily if left unattended.
Wheel balancing is available from your local ATS Euromaster and is carried out whenever you buy a new set of tyres, you can visit us in-centre.
The main benefit of having correctly balanced wheels is that your tyres with be performing as efficiently as possible. If your tyres are not correctly balanced this can lead to more serious and far more expensive, vehicle issues in the long run.
One of the first issues you will find is your steering wheel starts to vibrate at certain speeds. This can potentially make it more difficult to keep control of your vehicle and provide an uncomfortable ride for the vehicle occupants.
If your tyres are unbalanced you may also notice uneven tyre wear, which may result in you having to replace your tyres a lot sooner than you need to. This can also cause a drop in fuel economy, however, this may be less noticeable.
If the wheels of your vehicle are left unbalanced for a long period of time, the stress on the wheel bearings and suspension system can cause them to wear more quickly. Which could result in a much more expensive problem to fix.
There is often some confusion between these two services as they sound similar and both support the long term health of your tyres. However, these two services are very different.
In simple terms, wheel balancing ensures that the distribution of weight around the wheel is equal, a tyre fitter will add tiny weights to counter any imbalances to ensure the tyre rotates efficiently and evenly. Wheel alignment however looks at the position of the wheels in relation to the road and each other.
This helps ensure your vehicle drives in a straight line and are in the optimum position.
atselgi
ATS ELGi provides automatic car wash machine, wheel alignment machine, car workshop tools, wheel balancer, tyre changing machine to the customers with the best price.
Wheel Balancing Procedures
Wheel balancing is the process of balancing the weight of a tire and wheel assembly so that it travels evenly at high speeds. Balancing requires putting a mounted wheel and tire on a balancer, which centres the wheel and spins it to determine where the weights should go. Every time a wheel is first mounted onto a vehicle with a new tire, it has to be balanced. The goal is to make sure the weight is evenly distributed throughout each of the wheels and tires on a vehicle. This process evens out heavy and light spots in awheel, so that it rotates smoothly.
If there is even a slight difference in weight in the wheels, it will cause enough momentum to create a vibration in the car.
In fact, wheels and tires are never exactly the same weight all around. The wheel’s valve stem hole will usually subtract a small amount of weight from that side of the wheel. Tires will also have slight weight imbalances, whether from a joining point of the cap plies or a slight deviation from perfectly round. At high speeds, even a tiny imbalance in weight can become a large imbalance in outward force, which could cause the wheel and tire assembly to spin in a heavy and uneven motion. This usually turns into a vibration in the car as well that could cause uneven and damaging wear on the tires.
Maintaining proper wheel balance is a critical part of maintaining the life of the tire. Also proper wheel balancing ensures your vehicle has a smooth and vibration free ride.
Why wheel balancing is important for every car?
Wheels, a bit like tyres, aren’t something most of us spend much time worrying about.
But having correctly balanced wheels can make a big difference to how comfortably your car rides and how quickly components like tyres, steering and suspension joints wear out.
How do you know when your wheels are out of balance?
As your speed exceeds around 40mph, you might notice the steering wheel start to wobble in your hands. The faster you go, the greater this vibration becomes, to the point where it can be quite uncomfortable to hold the steering wheel, or – if its rear-wheel drive – the car feels as though it’s shuddering slightly.
Need a Wheel Service Equipment:
ATS ELGI is the largest manufacturer and distributor of Automotive Service Equipment in India. With our “One Stop Shop” approach, we offer the widest range of garage equipment in the country. Our Tyre Shop equipment like Wheel Aligners, Wheel Balancers & Tyre Changers utilize modern technologies to offer better reliability and precise application.
Like Loading.
..
View all posts by atselgi
Categoriesautomotive manufacturersTagsautomatic car wash machine, automatic car washer, automotive garage equipment, car lifting machine, car wash equipment india, car workshop tools, garage equipment manufacturers, paint booth manufacturers, tyre changer, tyre changing machine, wheel aligner, wheel alignment machine, wheel balancer, wheel balancing machine, workshop equipment manufacturers
Partnership program Upon
Blagoveshchensk
Catalog
Catalog of Products
Cliffs and shoes
Construction materials
Textile and leather
Textile and leather
Health and beauty
Health and beauty
Children's goods
Children's goods
Products and drinks
products and drinks
Electrical engineers
Electrical engineering
House and Garden
House and Garden
Industry
water, gas and heat
Water, gas and heat
Trade and trade and trade and trade and trade and trade and trade and trade and trade and trade and heat warehouse
Retail and warehouse
All categories
LoginFavorites
Wheel balancing with haweka adapter
62 412
Adapter set for balancing truck wheels.
VAL 40mm HAWEKA
In the price of prices and similar goods
38 161
Basic set with shaft TR28.55X3MM 124 657 033 HAWEKA
9,0003 9,000 HAWEKA Professional add-on kit for Motor System for balancing stands with electric/pneumatic clampDETAILSMore prices and similar products
81 810
HAWEKA ECO Motosystem for balancing stands with Remeded threaded shaft 40 mm Type: machine
more price and similar products
9000,000,000 Haweka Motosystem for balancer for balancing. threaded shaft 40 mm Type: machineDETAILSMore prices and similar products
115 600
200 018 405 Haweka Flange adapter set Worldkit II for a shaft with a diameter of 40mm
More prices and similar goods
67 200
adapters for machine drives with a cylindrical ramp 40 mm UNILUG without a central hole
.
16 177
Germany HAWEKA Centering cone with spacer washer 122-174mm
DETAILSMore prices and similar products
More prices and similar goods
32 040
700400005 HAWEKA , 4-X Ray adapter for Balancing Voro vehicles type:
more pricing and similar goods 9000 32 32 100000 100000 9000 9000 -174 mm for shaft 40 mm HAWEKA
DETAILSMore prices and similar products
275 400
91 220V TECO Balancing machine Type: balancing machine
More prices and similar goods
40 270 270
700400004 HAWEKA , 5 beam adapter for Balancing wheels of trucks type:
more price prices and similar goods
9000 65 69000 9000 adapters for balancing truck wheels.
For shaft 40mm Haweka Type: adapter , Type DETAILSMore prices and similar items
75 410
Balancies Balance CB1930E for wheels to 70 kg Manufacturer: Trommelberg
More prices and similar products
9000 54 564700 589 171 Adaptors Haweka Haweka Haweka Haweka Haweka 9006 Vehicle type: trucks
DETAILSMore prices and similar products
135 940
Balancing machine "semiautomatic" CB1960B (for wheels up to 70 kg) Type: balancing machine,
More prices and similar goods
24 800
cone 122-174 mm with shaft 40 mm Haweka
Read more prices and similar goods more than more than more than the Balance Haweka 0 9001 Similar items
96 039
200 018 365 Haweka Flange adapter set WorldKit II for 36mm shaft
DETAILSMore prices and similar products
24 800
cone 122-174 mm with Wall Wal 36 mm Haweka
more than prices and similar goods
71 400
Adapters for discs without the central opening for machine tools 9006 with 9006 conical cords shaft shank 40 mm HAWEKA UniLug
Balancing machine BM-200 for wheels of cars and commercial vehicles.
This model is one of the most popular among Russian-made balancing machines. The design of the support-clamping unit, as well as the dimensions of the casing, make it possible to balance wheels weighing up to 75 kg, with a rim diameter of up to 24 and a rim width of up to 20 inches. Control panel in Russian. The "Two Operators" function allows you to serve two vehicles with different wheel sizes at the same time. The reduced speed of rotation of the balancing machine shaft increases the service life of the braking mechanism of its rotation and reduces the time of measurements. Fixes the number of balanced wheels. Five balancing programs. nine0003
| Measurement range of unbalanced mass, g | 0–200 |
| Unbalanced mass measurement resolution, g | one |
| Power supply: | |
| Supply voltage, V | 220 nine0307 |
| current frequency, Hz | fifty |
| power consumption, kW, no more | 0. 8 |
| Shaft rotation speed, rpm, no more | 100 |
| Overall dimensions (LxWxH), mm, no more | 1375x1100x1462 nine0307 |
| Weight, kg, no more | 90 |
| Permissible parameters of balanced wheels | |
| maximum wheel weight, kg | 75 |
| wheel rim diameter, mm (in) | 265 - 665 (10" - 26") |
| wheel rim width, mm (in)) | 40 - 510 (1.5" - 20") |
