Everyone who has at least dabbled into vehicles and vehicle care knows how important it is to own a good floor jack.
This useful tool allows you to lift your vehicle to perform necessary repairs and changes on it, as well as provides the necessary help on the road if you have it in your trunk.
What if you cannot accommodate the floor jack under your vehicle because it sits too low? No matter how compact your floor jack is, it simply won’t fit underneath!
This can be quite frustrating and common, especially if you own a sports car that is only a few inches above the ground.
What you need is the best low profile floor jack that will account for all such cases.
Top 10 Best Low Profile Floor Jacks In 20221. Arcan 2 Ton Low Profile Quick Rise Steel Floor Jack XL20View Today’s Deals
Unlike traditional floor jacks, the Arcan 2-ton low profile jack is one of those jacks for lowered cars – precisely, those that weigh 2 tons and less.
One of its main attributes that I liked is how user-friendly it is. Firstly, there is a universal joint release mechanism that provides precise and easy control of the jack enhanced with dual pump pistons that quickly raise the floor jack saddle in order to load it.
Also, I felt perfectly safe while using it – there is a protective rubber saddle and a foam handle bumper on a two-piece handle, which allows for easy storage. It doesn’t occupy a lot of space, and the overall dimensions are 26 x 13.2 x 6.3 inches.
I want to praise the high-quality construction of the jack, as well. The wheels and body of the jack are made of stainless steel, and the lift range of the jack goes from 3.5 to 18.1 inches.
My thoughts on safety have been backed up with the fact that this jack compiles with rigorous ASME PALD safety standards.
The only negative thing that I need to mention is this is a heavy jack, although they advertise it as lightweight.
Pros:
Cons:
I can’t say anything more but sing praises to Arcan for producing such a quality jack for low cars!
2.
Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel Floor JackView Today’s Deals
Speaking of a jack that can take any professional heavy-duty job, I cannot skip Pittsburgh Automotive – a 3T-capacity beast!
Right out of the box, I perceived how good it looks, although this is not of prime importance to me. But the sleek red design cannot go unmentioned!
What is crucial for it to enter my best floor jack for lowered car list, though, is how satisfied I was with the performance of this low profile floor jack.
I’m a witness that this jack is exceptionally safe. However, it does not come with jack stands (just like all of the automotive low profile auto jacks), and it serves for a temporary lift of the vehicle.
Before exposing any part of your body underneath a car for a more serious repair than a change of a tire, always use jack stands.
Once you connect the jack, the Rapid Pump dual pump system lifts your vehicle almost effortlessly.
Even for the highest lift, you’ll need only around six pumps. The maximum height it can reach is 19-¾’’, and it sits as low as 2.75 inches above the ground.
Lastly, I must admit that this jack is big and heavy (around 70 lbs). I wouldn’t carry it in the trunk.
Pros:
Cons:
All in all, this jack is a real bang for the buck in the category of low profile jacks for low cars.
View Today’s Deals
Another low profile floor jack from Arcan?
What can I say, they have devoted their carefully utilized line of products to cater to every user’s needs!
Straight off: if you’re looking for a lower-priced low profile racing jack, search elsewhere. However, if you’re in for a premium model that includes everything a driver dreams of, keep reading about the ALJ3T by Arcan.
I was pleased to learn that it is made of lightweight aircraft-grade aluminium.
Now, there has always been a dilemma – Are steel floor jacks more durable and quality than aluminium ones?
As a rule of the thumb, yes. But always?
Certainly not. And this one is the sole proof of that!
The fact that it is made of such a high-quality aluminium means that it is not only resistant and sturdy, but also very lightweight, and that’s the main difference. This floor jack can be your companion on the road, too!
It is both made for professional use and any car service, but it is also easy enough to use for regular users. Namely, the reinforced lift arm and a side-mount two-piece handle allow for convenient jack positioning and effortless lift.
As I noted, its only downside is the fact that you’ll be paying a steep price for it (but it’s well worth it).
Pros:
Cons:
During the testing period, this floor jack outperformed in all fields.
If you want to invest in a premium low profile jack, this is the one!
View Today’s Deals
Next up is the hydraulic automotive jack, Pro-Lift F-767, that offers a lot of functionality and reliability with surprisingly low price.
I was pleased to discover that this extra-low profile jack has a lifting range of 3-1/2 to 14 inches, and it can hold 2 tons.
Of course (as I always do), I had to put it under a little test – what will happen if I slightly overload it?
The built-in safety valve immediately was activated, so that you can rest assured that the F-767 is 100% safe, even if you accidentally overload it.
Just like with all quality steel floor jacks, you can expect durability. What I want to add is that this jack is not bulky and heavy like some can be – it weighs around 30 pounds, which cannot be considered light, of course, but it is less compared to other steel jacks.
Still, I cannot guarantee it is compact enough to fit in each trunk, but it’s a great choice to have in your garage.
Bonus points for the package – the box that the jack comes in is pretty sturdy. Once you remove the cardboard, the jack easily slides back in the box, so you can use it for storage and protection.
In comparison to my other picks, this floor jack has a bit higher clearance – 4 inches – but still satisfactory enough for it to be called a low profile floor jack.
Pros:
Cons:
View Today’s Deals
I can tell that there is some kind of stigma surrounding products that are not made in the USA but in China – and I cannot really see why.
A wide variety of best items (including floor jacks) is produced there and tested in the US so that it is assured that they meet our safety standards.
The Sunex 66002LP is no different – it is on a par with most low profile steel floor jacks that are durable and will serve you for a long time.
It also happens to be the lowest car jack on my list, with only 2.75’’ minimum height. To lift it up to the maximum height, 24’’, you need around six to seven pumps with dual pump pistons. This height is enough for cars, pick-ups and SUVs. No more crouching!
What also makes it adaptable to various vehicles is its versatile construction and easy-to-access connecting points.
Another benefit I want to tackle is safety. Namely, the rubber saddle and a foam handle bumper prevent any vehicle damage, and wide front wheels, along with swivel rear casters are stable.
The quality of the handle disappointed me a bit; I think that it’s not as durable as the rest of the jack. Kudos to its length, though (45.25’’)!
Pros:
Cons:
As a seasoned mechanic, I can wholeheartedly recommend the Sunex 660LP to all semi-professional drivers!
Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Quick LiftView Today’s Deals
Another gem I found in the overflowing market is the Liftmaster ultra-low steel floor jack.
What you will enjoy as much as I did is the power that this sleek jack offers – 3 tons, with a 3-inch low profile!
Just like most of the premium picks on the market, it is equipped with the dual pump system for lifting. I want to say that I had no problems with jammed pistons, that I saw as something that customers mentioned, so I particularly paid attention to it.
When I tested it, I estimated that the time it needs to lift the vehicle is 40 seconds sharp (wow)!
Not only its speed is impressive, but the height, as well. It can go as high as 17 inches.
Safety? Checked! The two-piece knurled handle has the foam bumper, and the rubber pad is strengthened for minimal friction.
I was also satisfied with the quality of the wheels. They seem expensive and stable.
My experience with maintaining this car jack was a bit of a pain in the neck – you need to protect it and clean it regularly, more often than you would typically do with a floor jack.
Pros:
Cons:
In spite of the time it consumes to be properly maintained, this low profile steel floor jack is one of the best heavy-duty tools that you can currently buy!
View Today’s Deals
This jack by Pittsburgh is the kind of a low-profile car jack that everyone wants to own because it is extremely portable, versatile, and useful.
Let’s break down the things that I liked and disliked about this model.
First and foremost, when I compared all of the floor jacks that made its way to my list, this one deserves to be crowned the most compact low profile floor jack.
Along with its compactness, the whole construction is impressive, as well. It was made of lightweight aircraft aluminium with a sapphire anodized finish.
Not only its body is made of premium materials, but the handle, as well. It is a knurled aluminum handle with foam bumper for a comfortable grip and safe user experience.
It can go as high as 14 – ¾ inches in only three and a half pumps. That’s less than 30 seconds! I also liked how the universal joint release provides a precise load control in any handle position, which means that beginners can also use this jack.
All these advantages come at the expense of this tool’s power. It can lift vehicles that are up to 1.5 ton heavy. Still, this will cater to many users!
Pros:
Cons:
If you’re stuck in the process of selecting a low-profile floor jack that you can bring with you on any travel, this is the one!
Powerbuilt 620479E Xtra Low Profile Floor JackView Today’s Deals
One of the best 2-ton low profile floor jacks that I’ve tried out is the Powerbuilt 620479E.
What distinguishes this floor jack from the others is that it has the capability to raise and hold vehicles without the support of a jack stand. It has a built-in safety bar that should be put under the lift arm for this purpose.
At first, I suspected it would be a problem to release the safety latch safely, but it’s quite simple to pump up the jack a little and lift the latch while you’re lowering it. Unfortunately, this is a bit awkwardly explained in their manual.
If you’re looking for the best low profile floor jack for racing and sports cars, search elsewhere. Because of its clearance and construction, I recommend it for SUV’s, Jeeps, trucks, etc.
To further make this jack user-friendly, the manufacturers made sure it is compatible with most kinds of hydraulic oil.
I’ve installed and used hundreds of floor jacks, and I’ve read the same amount of manuals (though I usually don’t use them).
This one wasn’t really clear or intuitive, though it is not difficult to install the jack and use it.
Pros:
Cons:
If your needs are such that you need a low profile jack for semi-professional use, I can confirm that the Powerbuilt 620479E is a great choice.
View Today’s Deals
Investing in the best jack doesn’t just make all the repairs more convenient, but it can prevent any unforeseen circumstances on the road.
Initially, it wasn’t clear to me why this floor jack is that expensive. However, I soon found myself amazed with a number of its features.
Namely, it was constructed from durable, industrial-grade aluminum alloy.
This equals ultra-lightweight design for a floor jack while it remains reliable and stable.
The whole process of lifting, every time I tested it out, was flawless. From the dual plunger system that is fast and efficient, to the safety valve that stopped the jack immediately when I tried to overload it, I have only praises.
The other parts don’t skimp on the quality, either. The rubber dotted saddle protects your vehicle from any scratches and dents, and the swivel rear casters enable for easy positioning and use.
Again, there is the elephant in the room – this low profile floor jack costs over $200. But the price is there for a good reason!
Pros:
Cons:
This low profile floor jack does come with a steep price tag, but it is more than a worthy investment if you will use it often, or if you’re a professional in this field.
View Today’s Deals
As we approach the end of today’s quest, there is one more slim jack for cars I want to introduce you to, the Blackhawk B6350.
I saved the most powerful for the end – as a 3.5-ton low profile floor jack, this beast can lift anything that you want.
Let’s talk about safety first. The universal joint release enables a precise load control in any position of the handle, and the extra-wide steel caster wheels guarantee the necessary stability.
Additionally, there is a built-in safety valve that reacts when you overload the jack, and I can report that it works flawlessly.
If something goes wrong once you receive the jack, it’s good to know that you’re backed with a one-year warranty.
What makes this jack a valuable purchase are not only well-met safety standards but also its functionality. You can lift it up to the maximum height of 22 inches, and it has a very smooth let-down afterwards.
As you can assume, the only downside is that this jack is a bit heavy and large. However, in case you’re wondering, you can detach the handle for easier storage if you loosen a 9/16 bolt.
Pros:
Cons:
The biggest reason why I liked the B6350 that much is its power. It will surely leave you without words!
How to choose the Best Low Profile Floor JackAnd now that we took a good look at all the units competing for the title of the best low profile floor jack currently sitting on the market, let me quickly go through some considerations and features I used to sort them out.
You see, every customer has different needs so the opinion what makes the “ideal unit” depends on who is buying the jack. Knowing all the relevant info about this type of car gear will help you find the ideal match for your four-wheeler.
This is, by far, one of the most important considerations regarding this range of products. Since you are looking for the low profile floor jack I can assume that the floor of your vehicle sits very close to the pavement.
But, what can be considered “low profile” these days. Well, anything less than 3.5 inches should work for most of the contemporary low profile vehicles.
As for the maximum range it really depends on what you want to do with the vehicle. For instance, I managed to perform most maintenance duties with 20 inches of lift so you should be able too.
Weight CapacityThis is yet another, very important thing to take into account. In order to be safe or for that matter even functional, the jacks should be able to effortlessly support the full weight of your vehicle.
So, check your vehicle’s specs before making the final pick. If you are buying the jack for your repair shop or multiple family cars go as far as you can.
Your investment will pay off in the long run.
Based on the materials they were made from, most commercially available floor jacks can be divided into three groups:
Steel – Steel is very robust and durable material perfectly suited for heavier cars. Also, these units are usually very cheap. On the other hand the material’s weight makes it a poor choice for on-the-go repairs.
Aluminum – Aluminum is less durable and far more expensive than plain old steel. However, the light weight is ideal for permanent storage in the trunk and effortless usage.
Hybrid – As the name suggests, the hybrid jacks are made both from steel and aluminum. Hence, they represent the perfect middle ground between the two. Ideal for mechanics who take house calls.
Saddle SizeSaddle size (or platform size) refers to the surface of the jack that comes in the direct contact with the vehicle.
How does this affect the performance? Well, the bigger platform equals to more stable and safe lift.
This feature becomes especially critical if you are planning to lift the vehicle to 16 inches or above.
Bottle jacks provide safe and reliable performance regardless of the saddle size.
Regulatory Compliance and WarrantyThis one is pretty self-explanatory. The floor jacks are the tools that sustain a lot of pressure and attrition over their lifetime. You want your unit to be covered by the manufacturer’s warranty for as long as possible.
Also, all jacks you consider buying should meet ASME or some other relevant regulatory standard.
Frequently Asked Questions1. What is a low profile floor jack?A low profile floor jack serves to lift up the car when there is very little room underneath the car.
It may sound unbelievable to you, but they need only around from 2.5 to 4 inches of clearance underneath a vehicle.
So, a low profile floor jack can basically slide wherever you want it to! It is most popular with racing cars and sports cars, but also with car enthusiasts who own a dropped car.
It is very straightforward to use a low profile floor jack, just like the traditional one:
Remember: safety always comes first, and only when you take these measures are you certain that you’ve used a low profile floor jack correctly.
ConclusionAfter testing more than thirty products, I am adamant that the Arcan 2-ton is the best low profile floor jack overall.
If the low cost is higher on your priority list, I recommend my budget pick, the Pro-Lift F-767. It still has all of the required capabilities, but it is made from slightly cheaper materials.
Until next time!
EcoDrivingUSA.com
Dave McCurdy
I am Dave McCurdy I am the content developer on the ecodrivingusa.com website. I have 6 years of experience in marketing as an automotive major.
Every vehicle owner deserves a dependable hydraulic jack to lift automobiles to change a flat tire or fix issues underneath the car. Although most people pick a bottle jack because it’s compact, lightweight, and affordable, I prefer a floor jack because it’s more stable and effortless to position under the automobile. Unfortunately, there are many floor jack choices.
For me, the ideal trolley jack must have an impressive lifting height range, allowing me to raise any vehicle from a road-hugging convertible to a terrain-conquering lifted truck. Only the best low profile floor jack fits this requirement to the tee. If you’re also looking for such a floor jack, I’ve reviewed ten of the market’s best options to help you determine the best low-profile trolley jack to use in your vehicle.
One disadvantage of low-profile jacks is their price compared to conventional bottle hydraulic lifts. This trolley jack won’t hurt your budget while giving you commendable vehicle lifting performance.
Any automobile with a 2.75-ton maximum gross weight should be compatible with this 2-ton floor jack. Owners of sedans, small-sized pickup trucks, and SUVs will find this service jack more than capable of lifting their vehicles 13 inches off the ground.
It’s comforting to know that underneath its shiny blue paint is a solid steel alloy construction, allaying any fears about this trolley jack failing after only several uses. Each component is as robust as high-end brands, adding to the confidence in this device.
Positioning this service jack under the car is a breeze because it has oversized front wheels and the rear casters never snag.
Its lever is long enough to facilitate precision maneuvering, while the saddle is adequately broad to guarantee correct lift point alignment.
I’m also impressed with this service jack’s quick-start technology. Most floor jacks require at least 20 pumps to raise the lifting arm. This product’s proprietary system ensures three times faster lift arm elevation, allowing operators to finish faster.
Although this trolley jack has an admirable lifting performance, its minimum lifting height might be insufficient for low-clearance cars. At 5.125 inches, you’ll find it challenging to slide this floor jack under a Porsche, Ferrari, or other ground-hugging, ultra-low cars.
Still, it should be perfect for most standard-clearance automobiles, such as SUVs, vans, and small-sized trucks.
It’s not as low-profile as most people would want, but its lifting performance and affordability make this hydraulic floor jack a good option for average vehicle owners.
Pros
875-inch lifting rangeCons
This low-profile service jack is a beast in any home garage and professional auto repair shop.
I call it the best low profile floor jack for the money because of its unbeatable lifting performance, exceptional craftsmanship, and sweat-free maneuverability.
Sliding this three-ton floor jack under a Ferrari, Porsche, Mustang, or other low-clearance sports cars is a cinch with its 3.125-inch minimum lifting height.
Raising trucks, vans, SUVs, 4x4s, ATVs, and trailers 20 inches off the floor is also never a problem, making this floor jack as handy in the home garage as it is in professional auto shops.
Its lifting height range isn’t this trolley jack’s only admirable attribute. Its load capacity also deserves mention.
Capable of lifting any 4-ton vehicle, this floor jack is the last device you’ll buy if you have a thriving auto repair shop.
Two precision-engineered piston pumps guard the hydraulic cylinder, pushing high-performance oil to the lifting arm to raise vehicles with minimal effort.
The extra-wide saddle facilitates precise lift point positioning and guarantees a non-marring surface for the vehicle’s under-chassis. Maneuvering this service jack is sweat-free, thanks to its swivel casters and two-foot jack lever.
Sadly, some retailers don’t know how to package products properly, with some customers complaining of a few missing parts and poorly-handled elements.
It’s not Torin’s fault, but third-party sellers must do everything they can to take care of these products. I suggest checking your order after receiving the item and contacting the seller if something’s amiss.
Torin never fails to impress with its thoughtfully designed products. This low-profile trolley jack continues the brand’s untarnished reputation in cutting-edge vehicle-lifting technologies.
Pros
Cons
Something is comforting about Torin’s BIG RED trolley jacks. They’re stockier than most floor jack brands, giving you confidence in their use.
This 4-ton hydraulic jack delivers exceptional vehicle-lifting performance like any other Torin device. It’s like the Torin TCE ATZ830026XU but with a higher load capacity.
It might not have an ultra-low lifting height like the Torin TCE ATZ830026XU, but 3.875 inches is low enough for most low-clearance vehicles. For instance, the Porsche 911 has a ground clearance of 4.29 inches, while the Lamborghini Aventador’s ground clearance is 4.
92 inches. I don’t see why you can’t use it on other vehicles.
This floor jack is also perfect for SUVs, trucks, vans, and trailers, raising them 20 inches off the floor. Any automobile with a 5.35-ton maximum gross weight should be compatible with this vehicle-lifting device.
Maneuvering and operating this floor jack is hassle-free because of the carefully designed wheels, handle, safety valve, and lifting arm. Its steel alloy frame offers confidence in its use, while its dual piston pump guarantees more effortless pumping.
Although this low-profile floor jack is impressive, it’s hefty. At 100.8 pounds, I wouldn’t dare put this in my trunk. The truck bed should be more suitable for this device, although leaving it at home sounds more reasonable.
You can still buy this low-profile floor jack if you don’t mind its heft. It should make roadside emergencies more manageable with its superior lifting performance.
Its heft is the only thing preventing this low-profile floor jack from earning five stars.
You should still give it a thumbs up if weight isn’t an issue.
Pros
Cons
I love steel hydraulic trolley jacks because their heft offers confidence and stability better than lightweight floor jacks.
However, I also recognize some vehicle owners who might want a lither-weight option without undermining the device’s vehicle-lifting capabilities.
This low-profile aluminum trolley jack fits the bill like a glove.
With an impressive 15.75-inch lifting range from 3.5 to 19.25 inches, this floor jack can accommodate a power-hungry Ford F150, a road-hugging Mustang, and every high-performance machine in between.
Four-ton vehicles will sit nicely on this floor jack’s extra-wide saddle, relying on its robustly-constructed steel-reinforced lifting arm to elevate vans, trucks, SUVs, off-roaders, trailers, and sedans.
Its impressive vehicle-lifting capabilities make this aluminum trolley jack worth having in any automobile, home garage, and auto repair shop.
Tipping the scale at only 58 pounds, handling, maneuvering, and storing this trolley jack isn’t a concern. The lever is extra-long, and the wide-track wheels offer excellent maneuverability.
High-quality rubber seals protect the device’s hydraulic chamber against contaminants, while the safety bypass valves prevent over-pumping. Although marketed as an aluminum trolley jack, this automotive tool has steel reinforcements to increase its structural strength and rigidity.
Unfortunately, this aluminum trolley jack has a few quality control issues. Some units have uneven wheels and off-centered lifting arms.
You might want to check your order before use and inform customer service of any defect.
You deserve only the best low profile aluminum floor jack for your needs.
Quality control issues aside, this aluminum floor jack impresses vehicle owners with its lifting performance and sturdy craftsmanship. If these don’t soothe you, you might want a low-profile jack from American brands.
Pros
Cons
Most of the low-profile trolley jacks on this list have a maximum lifting height of 20 inches.
If you require a trolley jack with a higher lifting height, you’ll need this best low profile high lift floor jack.
With a lifting arm that extends two feet into the air, this hydraulic floor jack makes its case as one of the best vehicle-lifting devices for backyard auto shops and home garages.
Small trucks, vans, SUVs, dirt machines, and tiny campers will be up in the air without a glitch.
Surprisingly, its minimum lifting height also blows the mind. You can slide this trolley jack under a sports car with a three-inch ground clearance. Even the Torin TCE ATZ830026XU’s 3.125-inch ultra-low-profile design cannot match this floor jack’s 2.75-inch ground clearance.
The Bugatti Veyron’s under-chassis sits 3.54 inches above the ground, putting this into perspective. On the other hand, the 2010 Mercedes-Benz E-Class has an astonishingly low ground clearance of three inches, and this trolley jack will still handle it.
I’m impressed with this low-profile trolley jack’s unusually lengthy frame and 45.25-inch pump handle, making it one of the best on this list. Sliding this service jack under a 2.75-ton or 6,060-pound vehicle shouldn’t make you sweat.
Bypass and load-limiting safety valves are a standard with this trolley jack, ensuring device safety and longevity.
Unfortunately, this two-ton device has a hefty 98-pound form, potentially impacting its portability.
However, I feel confident about heavy-weight tools because they reflect a thoughtful construction.
I don’t mind stowing this low-profile floor jack in my trunk because its lifting capabilities are beyond comparison. It’s one of those products that never reneges on its “low-profile” labeling.
Pros
Cons
Torin returns to our list with another 3-ton trolley jack, competing with the TCE ATZ830026XU for car owner attention.
This low-profile floor jack has a slightly higher minimum lifting height than the TCE ATZ830026XU at 3.
7 inches and a somewhat lower maximum lifting height of 18.7 inches. Still, you shouldn’t have any problems sliding this device under your low-clearance vehicle.
Its 3-ton weight limit translates to the effortless lifting of vehicles with a 4-ton maximum gross weight, such as SUVs, mid-sized pickup trucks, trailers, campers, vans, and off-roaders. It can be a dependable automobile-lifting device for shops and garages.
Like many Torin floor jacks, you’ll never break a sweat to maneuver this trolley jack into position. The extended lever allows operators to position the extra-wide saddle underneath the vehicle’s lift point, wherever it is. I like the foam padding on the handlebar for more comfortable positioning.
I’m surprised to learn this steel alloy trolley jack has an aluminum frame reinforced with premium-quality steel. That’s another reason to get this low-profile hydraulic jack for automobiles.
I have two issues with this low-profile floor jack. First, it’s 9.
1 pounds heftier than the Torin TCE ATZ830026XU. Second, its single-piston pump design makes this floor jack’s price seem more unreasonable than other 3-ton trolley jacks.
Of course, you can always ignore my opinion at any time.
This product would have been the best 3 ton low profile floor jack on this list if not for its single-piston pump design and hefty build. Hence, I recommend the Torin TCE ATZ830026XU because it has a broader lifting range and a lighter-weight form.
Pros
Cons
Here’s another two-ton trolley jack to extend your choices alongside the Aain AA51G and K Tool International KTIXD63105.
Although this low-profile floor jack’s lifting range isn’t as impressive as the K Tool International KTIXD63105’s 2.75- to 24-inch limits, it should still be invaluable for owners of vehicles with a ground clearance of at least 3.5 inches.
Two tons might seem inadequate for most people, but the average household only has an average-sized sedan. This trolley jack is sufficient in such instances, allowing car owners to lift their vehicles and perform under-chassis repairs or change a flat tire.
The craftsmanship looks solid, and its design is more modern than other floor jacks I have seen. I trust this trolley jack will last many years, giving vehicle owners the chance to pass it down to their kids and grandkids.
I’m astonished to learn this trolley jack only weighs 30 pounds, 68 pounds lighter than the K Tool KTIXD63105 but 8.8 pounds heftier than the Aain AA51G. Keeping this floor jack in the trunk shouldn’t be a concern, and neither is carrying it around the house.
Surprisingly, this floor jack is four times more affordable than the K Tool International KTIXD63105, making it an excellent option for thrifty yet quality-minded vehicle owners.
I don’t mind this trolley jack’s 14-inch maximum lifting height. However, some vehicle owners might consider the attribute wanting.
Placing a few wood or metal blocks on the saddle should improve this trolley jack’s lifting height.
If you’re after a two-ton low-profile floor jack with a more impressive lifting range, I recommend the K Tool International KTIXD63105.
Pros
Cons
Is a 3-ton trolley jack too much for your vehicle-lifting demands, while a 2-ton floor jack is somewhat short? If you’re in such a dilemma, I recommend this 2.
5-ton low-profile floor jack.
Liftmaster redesigned and reengineered its 2.5-ton low-profile jack to make it more durable while increasing its lifting capabilities.
This second-generation low-profile trolley jack can slide under vehicles with a ground clearance of 3.15 inches, making it almost at par with the 3.5-ton Torin TCE ATZ830026XU’s 3.125-inch minimum lifting height.
Sedans, small vans, compact pickup trucks, and similar vehicles should be a cinch to lift with this 2.5-tonner.
I’m surprised this 2.5-ton trolley jack only weighs 28.66 pounds, 70.34 pounds lighter than the 2-ton Sunex 6602LP.
Its re-engineered hydraulics make this floor jack ten times more durable than the first iteration, making its three-year warranty more plausible.
Sadly, I found some customer complaints about the lifting arm not lowering slowly and safely. This action can be dangerous because you could cut off your fingers if you’re not cautious. Its 14.5-inch maximum lifting height might also not accommodate high-clearance vehicles.
I recommend testing the low-profile jack after unboxing to check the lifting arm’s operation. You don’t need a replacement if everything works fine. As for its low maximum lifting height, wood blocks on the saddle should do the trick.
A bridge between a 2- and 3-ton low-profile floor jack, this trolley jack is worth having if you have a vehicle that weighs no more than 3.25 tons. In hindsight, I would still recommend a 3-ton unit for your automobile.
Pros
Cons
This trolley jack competes with the K Tool International KTIXD63105 for being the lowest-profile and highest-lifting floor jack on this list.
There’s little difference between this ultra-low-profile trolley jack and the K Tool KTIXD63105 because both have an impressive 21.25-inch lifting height range. The minimum lifting height is 2.75 inches, extending to two feet.
Operators can lift exotic supercars, hypercars, and similar low-clearance vehicles within seconds. Raising compact SUVs and lightweight trucks only requires as few as 6.5 pumps to reach the 24-inch maximum jack height.
I don’t question its superlative construction featuring premium-quality steel alloy. It feels as sturdy as the K Tool KTIXD63105, although I might say even better.
It’s also safer to operate than other low-profile floor jacks I’ve tested and didn’t make the cut in this list. This device won’t slam in your face.
This floor jack’s principal advantage over the K Tool KTIXD63105 is its reach. The latter only has a 45.45-inch handle, while this product has a 50-inch lever for better maneuverability under a low-clearance car.
Its three-foot-long frame and 19-inch throw also span a vehicle’s cross-section more efficiently, making it the best low profile long reach floor jack on this list.
Unfortunately, this low-profile floor jack is heftier than the K Tool KTIXD63105 by 5.8 pounds. It’s also more expensive by several tens of dollars.
Disregarding my opinion is always your prerogative, of course.
As the K Tool KTIXD63105’s direct competitor, this floor jack’s slightly steeper price and heftier form make it less appealing. Regardless of which floor jack you choose, I’m confident you’ll be the winner.
Pros
Cons
PT Performance Tool W1645 3.5 Ton Low Profile JackThe tenth low-profile floor jack on this list is this 3.5-ton vehicle-lifting device from PT Performance Tool.
It’s an excellent compromise between the 4-ton Torin BIG RED AT84007R and the 3-ton floor jacks we featured on this list.
Its weight rating should make it a cinch to lift vehicles with a maximum gross weight of 4.7 tons or 10,300 pounds, such as campers, trailers, pickup trucks, sedans, SUVs, and others. This versatility makes this low-profile floor jack an excellent choice for shop owners and professional mechanics.
Although its lowest lifting height is not as noteworthy as the K Tool KTIXD63105 and Sunex 6602LP’s 2.75 inches, its 3.5-inch minimum lift is still commendable. It should still fit under many low-clearance automobiles, including sports cars, hypercars, and exotic supercars.
Pumping this to 20.5 inches shouldn’t take more than ten strokes, thanks to its dual piston-pump design. Operators won’t feel the strain in their arms as they raise their vehicles.
The trolley jack’s steel frame and lifting arm look solid. It should give vehicle owners peace of mind about this floor jack’s durability. Maneuvering it under the automobile is also more convenient than other trolley jacks because it has a 15-inch-wide body and wide-track wheels.
I understand this floor jack’s 90.6-pound heft because of its 3.5-ton weight capacity. Although it’s more reasonable than the 2-ton Sunex 6602LP’s 103.7-pound heft, it’s still heavy for most vehicle owners.
You might want to consider lighter-weight options if this floor jack is hefty for you.
Perfect for shops, this low-profile trolley jack never fails to impress. It offers a good blend of lifting performance, maneuverability, and durability, as any reputable floor jack should.
Pros
Cons
A low-profile trolley jack is a mechanical device that allows operators to lift or raise low-clearance vehicles to facilitate tire replacements or under-chassis repairs. It’s ideal for coupes, convertibles, sports cars, and other automobiles with a ground clearance of not more than four inches.
Professional pit crews and racing mechanics use low-profile service jacks because they are more convenient to maneuver under long-slung race cars and other professional vehicles. These devices have a tapered front and an extra-wide saddle to facilitate more efficient vehicle lifting.
Is a low profile floor jack better?Everything depends on your car. Indeed, a low-profile floor jack is better for low-clearance vehicles, such as sports cars, muscle cars, roadsters, coupes, convertibles, and similar automobiles. The device’s slim-tapered front section allows for nearly effortless sliding and positioning under the car’s jack points.
It would be impossible to slide a standard-height floor jack under such vehicles. The device’s leading edge will hit the automobile’s underside and damage it.
The good news is that a low-profile floor jack is versatile, accommodating other vehicles within the trolley jack’s load capacity and maximum lifting height.
US Jack makes the best low profile floor jack made in USA. It’s an authentic American-made trolley jack, unlike other brands with American-sounding names yet sources their products overseas, mainly in China.
However, US-branded low-profile floor jacks made in China can still be of good quality. Excellent examples are Torin, JEGS Professional, K Tool International, Liftmaster, Pro-Lift, Sunex, and PT (Performance Tool).
Just look at Apple and other American brands with Chinese sources, and you’ll see how “Made in China” no longer equates to poor quality.
How do you use a low profile floor jack?Using a low-profile floor jack is similar to operating a standard-height trolley jack. Start by determining your vehicle’s lift points and maneuver the floor jack to ensure its saddle is directly underneath the automobile’s jack point.
Next, pump the floor jack lever to raise the lifting arm, slowing down as it reaches the vehicle’s lift point. Align the saddle to the frame sill and continue pumping the trolley jack to raise the car.
When you’re ready to lower your vehicle, slowly twist the trolley jack’s hydraulic pressure release valve.
ConclusionThe best low-profile floor jack depends on your vehicle’s gross weight and ground clearance. You could escape with a low-profile trolley jack specific to your automotive parameters if you have several automobiles of similar tonnage and clearances. On the other hand, auto repair shops require a versatile low-profile floor jack to accommodate as many vehicle types as possible.
It’s a toss-up between the Sunex 6602LP and the K Tool International KTIXD63105. Both devices can lift 2.75-ton vehicles from 2.75 inches to 24 inches off the ground, limited only by their 2-ton weight capacity. However, the KTIXD63105 is slightly lighter and more affordable, making it a likely choice for most vehicle owners.
The 3-ton Torin TCE ATZ830026XU is always an excellent choice for most vehicle owners because of its 3. 125- to 20-inch lifting performance.
These are my honest assessments, and you’re welcome to try these low-profile floor jacks for yourself.
Very often, the choice of a car jack by users occurs according to typical preference, bypassing design nuances, and also, in a series of cases, even load capacity parameters. It is worth noting that this approach does not at all guarantee that the model you have chosen can last a long time and become a reliable element in your personal toolkit. In this regard, the journal "Expertology" recommends paying attention to the following criteria:
Any car owner knows that certain tools and equipment must be in the car . This, for example, is a first aid kit, a warning triangle, a spare tire, a fire extinguisher, an emergency cable, and, of course, a jack.
On the road, any unforeseen situation can occur when you need to change the wheel yourself. In this case, it is unlikely that you can do without a jack. But how to choose the right rolling jack? What requirements should be presented when choosing a jack for a car?
There are many varieties of jacks . Which of these tools is the most practical and convenient? What is the easiest to use and lightest in weight? Let's consider. The choice of a jack should occur only after you know exactly the weight of your car, the height of the clearance and determine the required lifting height.
Mechanical constructions . These are compact, reliable and simple rolling devices. They are widely used as on-board tools and are found in passenger car kits. They have excellent mobility, but have a low carrying capacity.
Simplest design. It is made of the main vertical frame with gearing teeth along which the lifting rack (pickup) moves with the help of a gear or lever transmission. To hold the car in a raised position, there is a fixing dog.
Different types of rack jacks are used not only for machine repairs, but also for lifting various loads at construction sites, warehouses and depots. That's why they come in different load capacities and sizes . The main advantage of these jacks is the ability to lift low-lying loads.
The disadvantages of rack jacks are:
| Pocrat type | Advantages | Disadvantages |
| – Low stability due to narrow footprint - the ability to break the screw at the upper lifting point - low carrying capacity - uneven distribution of efforts on the handle | ||
| bottle | + good load ability + simplicity of manipulations (the force is transmitted through the pumping lever) + Highly high degree stability due to wide footprint + Medium cost | – Periodic maintenance required (decontamination, seal checks and valve opening) - Inability to pick up cars with low ground clearance - Destruction of seals over time and, as a result, leakage of oil with the need for periodic topping up |
| Rolling | + Huge variety of drive mechanisms (pneumatic, hydraulic, mechanical, etc. + High stability + Low profile and low lift start + High rigidity + Uniform transmission of force | - Highest cost in the segment - Large weight and dimensions of the structure - Must be placed only on flat surfaces (due to the possibility of tilting) |
Rolling jacks have wheels and due to their fast operation and mobility, they are widely used in car repair shops and service stations. Rolling jacks are effective where their operation is quite active. The main advantages of hydraulic lifters are:
The disadvantages of the hydraulic lifting mechanism are:
This design is an inflatable cushion that is inflated with exhaust gases or compressed air. It has excellent stability due to its large footprint.
To lift the machine, the pneumatic device requires a supply of gas or air at high pressure. For this, car exhaust pipes or gas cylinders are used.
Under the pressure of the connected air, the chamber quickly expands and raises the machine. In this case, the driver almost does not make much effort to directly raise the car. Unlike other types, pneumatic jack provides the lowest labor costs for lifting work. The lifting speed is also quite high.
This jack is widely used in construction, in service stations, and has also found application for the evacuation of cars stuck in a swamp or mud. Its advantages include:
The disadvantages in the operation of pneumatic jacks include:
| Nomination | 9000 WIEDERKRAFT WDK-81885Rating: 4.9
German-made low profile jack designed for use in service stations and car inspection points. It has two working cylinders, which increases the reliability of the moving part and allows you not to be afraid of a possible breakdown. With dimensions of 640×342×174 mm, the WIEDERKRAFT WDK-81885 lifts a vehicle (or other bulky load) to a height of up to 455 mm, which is a good result, especially for low profile jacks. The only weak point identified by consumers was the mass parameter: moving 34 kilograms of metal in space is a rather difficult task. In other aspects, this model is beyond praise, justifying the price tag with excellent performance. Advantages
Disadvantages
Reviews of the best brands
TOP—7.Author Roman Ignatiev Reading 8 min. Views 41.6k. Posted by Updated Hello everyone! Today we will talk about rolling jacks - lifting mechanisms that will be useful to those who prefer to repair and maintain their own car on their own. Compared with hydraulic bottle jacks and mechanical screw jacks, the rolling jacks feature a large stroke and high productivity. Today, there are many rolling jacks from various manufacturers on the domestic market, which quite naturally causes difficulties in choosing the right model, especially for untrained users. That's why we've selected seven of the best rolling jacks up to 3 tons available for purchase in 2020. Contents
Ombra OHT203 is a hydraulic type rolling jack with an increased lifting height, which allows it to be used when carrying out repairs and maintenance of massive crossovers and SUVs. Due to its small size, the model is ideal for use in garages and other small areas. The maximum carrying capacity of the model is three tons. This is enough to lift any cars. Reliable hydraulic system provides smooth lifting of the load and its precise fixation at the exact height with minimal effort from the operator. The model is equipped with transport wheels made of wear-resistant materials, designed for intensive use. The body of the jack is made of steel profile coated with paint to protect against corrosion. During operation, the device practically does not require attention from the owner. Maintenance is reduced to periodic lubrication of moving parts, as well as an annual change of hydraulic oil, followed by bleeding the system to remove air. STELS 51131Today's review is completed by the Stels 51131 rolling jack, a compact rolling jack designed for domestic use in garages, car parks or road conditions. The model is designed for operation at temperatures from -25 to +45ºС, which allows you to use it at any time of the year, regardless of weather conditions. The lifting capacity of the device is two tons - this is enough to lift any cars. The relatively low pick-up height makes it possible to service vehicles with low ground clearance. Designed for use on a hard, level and stable surface. It is worth recalling that moving a lifted load with a jack is strictly prohibited - the device is intended exclusively for lifting cars. Upon completion of lifting operations, the vehicle must be fixed using special racks or stands.  |
