Certified tire technician training


Certified Automotive Tire Service (ATS) Technician

Professional passenger and light truck tire technicians will earn their Certified ATS.

Certified Automotive Tire Service (ATS) is a 300 and 400-level certification program that provides in-depth and comprehensive instruction on the recommended procedures for servicing modern automobiles and light trucks.

Certified ATS is designed for the professional passenger and light truck tire technician so the subjects range from the relationship between torque and clamping force to the TPMS relearn procedures on domestic and import vehicles.

Certified ATS also includes an exclusive module on Tire Conditions Analysis that uses images from TIA's Passenger and Light Truck Tire Conditions Manual to educate technicians on the most likely reasons for common irregular treadwater patterns.

Course Topics

The following is a list of the 15 Modules that make up the Certified Automotive Tire Service (ATS) Program:

  • Module 1 – Introduction: Covers personal protective equipment (PPE) and general shop safety practices.
  • Module 2 – Tires: Covers tire construction, nomenclature, sizing, application, and replacement guidelines.
  • Module 3 – Wheel and Fasteners: Covers wheel and rim nomenclature as well as fastener and bolt hole identification.
  • Module 4 – Raising the Vehicle: Addresses the step-by-step procedures and safety guidelines for lifting a vehicle with an above-ground lift or floor jack and jack stands.
  • Module 5 – Tire and Wheel Assembly Removal: Covers the procedures for removing the assembly from the vehicle including wheel locks and wheel covers.
  • Module 6 – Torque and Clamping Force: Explains the relationship between torque and clamping force including laboratory tests that show the effects of lubricants.
  • Module 7 – RIST: Covers the step-by-step procedures for wheel installation.
  • Module 8 – Demounting, Mounting, and Inflation: Covers the step-by-step procedures for demounting, mounting and inflating tires on rims with valve stem and bandmounted sensors.
  • Module 9 – Balance and Run-out: Address the basic principles of balance and run-out including the use of pin-plates to secure the assembly to the balancer.
  • Module 10 – Puncture Repair: Covers the general industry guidelines for puncture repairs in passenger and light truck tires as well as the step-by-step procedures for installing one-piece and two-piece repair systems.
  • Module 11 – Tire Conditions Analysis: Uses images from the Passenger and Light Truck Tire Conditions Manual to show technicians the signs of common problems that may require removal from service.
  • Module 12 – TPMS Identification: Explains the different types of TPMS currently in use and how they can be identified.
  • Module 13 – TPMS Service Requirements: Covers the step-by-step procedures for servicing valve stem and band-mounted sensors.
  • Module 14 – TPMS Relearn Procedures: Uses the TPMS Relearn Chart to explain the relearn requirements for the most popular domestic and foreign vehicles.
  • Module 15 – TPMS Diagnostics: Covers the necessary steps to correct a malfunction with common electronic scan tools including the replacement of a sensor on popular Asian models.

ATS Technician Certification Includes:

  • TIA Automotive Tire Service (ATS) Manual
  • TIA Certified ATS Technician Certificate
  • 13 TIA Certified ATS Technician Uniform Patches

Certification is valid for two years, at which time you will receive notification from TIA that it is time to re-certify. The re-certification exam is available online allowing for easy access anytime and anywhere within the window of availability.

CLASS OFFERING 

» View Course Schedules for dates.

REGISTRATION 

» Registration Form

Janet Lail

CE Enrollment Manager

Enrollment Management

Email: Janet Lail
Phone: 828-327-7000 x4116

Office Number: SS 819

Susan Blake

Director of Business & Technology

Workforce Development Innovation Center

Email: Susan Blake
Phone: 828-327-7000 x4330

Office Number: CDC 103

9 Best Tire Technician Certifications in 2022: : EPA Amusement Operators Safety Certification

Certifications can be a powerful tool to show employers you know your stuff. However, not all certifications are created equal.

We've compiled a list of the most common certifications for tire technicians. Not only will obtaining these certifications give you a leg up for job hunting, they will also increase your overall value.

9 Best Certifications For Tire Technicians

Rank  Certification  Organization  
1EPA Amusement Operators Safety Certification (EPA)EPA
2Emergency Medical Technician (EMT)NREMT
3Certified Auto Glass Technician (AGT)AGSC
4Certified Pharmacy Technician (CPhT)PTCB
5Commercial Tire Service - 300 Level (CTS)TIA
6Master Collision Repair & Refinishing TechnicianASE
7Basic Automotive Maintenance CertificateDelaware Tech...
8 Transit Bus Technician: Heating Ventilation & Air Conditioning (HVAC)ASE
9Certified Phlebotomy Technician (CPT)NHA

9 Best Tire Technician Certifications

1.

EPA Amusement Operators Safety Certification (EPA)

A comprehensive, equipment specific safety program designed to provide operators and their employees with a thorough understanding of best risk management practices. Industry accidents, which serve to put a spotlight on potential issues, can often be avoided through the utilization of proper risk management techniques.

A comprehensive, equipment specific safety program designed to provide operators and their employees with a thorough understanding of best risk management practices. Industry accidents, which serve to put a spotlight on potential issues, can often be avoided through the utilization of proper risk management techniques.

  • More than two years of education or training after high school required? No
  • More than two years of work experience required? No
  • Oral or Written Exam Required? Yes
  • Renewal Required? 

Event Planners Association

  • Lube Technician
  • Oil Burner Technician
  • General Service Technician
  • Technician

2.

Emergency Medical Technician (EMT)
  • More than two years of education or training after high school required? Yes
  • More than two years of work experience required? No
  • Oral or Written Exam Required? Yes
  • Renewal Required? Every 2 year(s)

Emergency Medical Technician

National Registry of Emergency...

  • Tire Changer
  • Lube Technician
  • Oil Burner Technician
  • General Service Technician

3. Certified Auto Glass Technician (AGT)

The Auto Glass Safety Council's Certified Auto Glass Technician certification examination is an online examination consisting of 70 multiple choice questions; allowing 90 seconds per question to answer. Requirements: knowledge in OSHA regulations, all types of auto glass replacement, NAGS and custom cut laminated glass parts will help in taking the examination.

The Auto Glass Safety Council's Certified Auto Glass Technician certification examination is an online examination consisting of 70 multiple choice questions; allowing 90 seconds per question to answer. Requirements: knowledge in OSHA regulations, all types of auto glass replacement, NAGS and custom cut laminated glass parts will help in taking the examination.

  • More than two years of education or training after high school required? No
  • More than two years of work experience required? Yes
  • Oral or Written Exam Required? No
  • Renewal Required? Every 3 year(s)

Auto Glass Safety Council

  • Lube Technician
  • Oil Burner Technician
  • General Service Technician
  • Technician

4. Certified Pharmacy Technician (CPhT)

PTCB's pharmacy technician certification program enables technicians to work more effectively with pharmacists to offer safe and effective patient care and service. Certification is achieved by meeting specific eligibility requirements and earning a passing score on the Pharmacy Technician Certification Exam (PTCE). The PTCB certification program is accredited by the National Commission for Certifying Agencies (NCCA).

PTCB's pharmacy technician certification program enables technicians to work more effectively with pharmacists to offer safe and effective patient care and service. Certification is achieved by meeting specific eligibility requirements and earning a passing score on the Pharmacy Technician Certification Exam (PTCE). The PTCB certification program is accredited by the National Commission for Certifying Agencies (NCCA).

  • More than two years of education or training after high school required? No
  • More than two years of work experience required? No
  • Oral or Written Exam Required? Yes
  • Renewal Required? Every 2 year(s)

Certified Pharmacy Technician

Pharmacy Technician Certification Board

  • Lube Technician
  • General Service Technician
  • Technician

How To Become A Certified Pharmacy Technician (CPhT)

View Details on Udemy

5. Commercial Tire Service - 300 Level (CTS)

  • More than two years of education or training after high school required? Yes
  • More than two years of work experience required? Yes
  • Oral or Written Exam Required? Yes
  • Renewal Required? Every 2 year(s)

Commercial Tire Service -. ..

Tire Industry Association

  • Lube Technician

6. Master Collision Repair & Refinishing Technician

The ASE Collision Repair Test Series includes one test for paint refinishers and three other tests for repair technicians, covering non-structural damage repair, structural damage repair, and vehicle mechanical and electrical system repair. These tests are all intended for hands-on collision technicians. ASE also offers a test specially designed for collision damage estimators. The Collision Repair and Refinish test series is available in either Paper/Pencil or Computer-Based Testing format.

The ASE Collision Repair Test Series includes one test for paint refinishers and three other tests for repair technicians, covering non-structural damage repair, structural damage repair, and vehicle mechanical and electrical system repair. These tests are all intended for hands-on collision technicians. ASE also offers a test specially designed for collision damage estimators. The Collision Repair and Refinish test series is available in either Paper/Pencil or Computer-Based Testing format.

  • More than two years of education or training after high school required? Yes
  • More than two years of work experience required? Yes
  • Oral or Written Exam Required? Yes
  • Renewal Required? Every 5 year(s)
  • Lube Technician
  • Technician

7. Basic Automotive Maintenance Certificate

Certificates are awarded upon successful completion of each class. Students are required to pass 6 courses to earn a Basic Automotive Maintenance Certificate.

Certificates are awarded upon successful completion of each class. Students are required to pass 6 courses to earn a Basic Automotive Maintenance Certificate.

  • More than two years of education or training after high school required? Yes
  • More than two years of work experience required? Yes
  • Oral or Written Exam Required? No
  • Renewal Required? No

Basic Automotive Maintenance Certificate

Delaware Technical Community College

  • Lube Technician

8.

Transit Bus Technician: Heating Ventilation & Air Conditioning (HVAC)

To identify and recognize those Transit Bus Technicians who demonstrate knowledge of the skills necessary to diagnose, service, and repair various systems on transit buses.

To identify and recognize those Transit Bus Technicians who demonstrate knowledge of the skills necessary to diagnose, service, and repair various systems on transit buses.

  • More than two years of education or training after high school required? No
  • More than two years of work experience required? Yes
  • Oral or Written Exam Required? Yes
  • Renewal Required? Every 5 year(s)
  • Oil Burner Technician
  • Technician

9. Certified Phlebotomy Technician (CPT)

A Certified Phlebotomy Technician (CPT) draws blood from patients or donors in hospitals, blood banks, or similar facilities for analysis or other medical purposes.

A Certified Phlebotomy Technician (CPT) draws blood from patients or donors in hospitals, blood banks, or similar facilities for analysis or other medical purposes.

  • More than two years of education or training after high school required? Yes
  • More than two years of work experience required? Yes
  • Oral or Written Exam Required? Yes
  • Renewal Required? Every 2 year(s)

Certified Phlebotomy Technician

National Healthcareer Association

  • Lube Technician
  • Technician

What is the best certification for a Tire Technician?

The EPA Amusement Operators Safety Certification (EPA) certification is most common among tire technicians. This certification is awarded by the Event Planners Association. This certification is great to have as it shows an improvement in your competency to perform your role. You can earn this certification at the beginning of your career, as it often doesn't require a minimum education level and work experience. To become a certified tire technician with EPA Amusement Operators Safety Certification (EPA), you need to pass the exam. Lucky you - certification doesn't require more than two years of work experience. Renew certification every year.

Tire technicians are most likely to hold a combination of the following certifications: EPA Amusement Operators Safety Certification (EPA), Emergency Medical Technician (EMT), and Certified Auto Glass Technician (AGT).

Check Jobs That Match To Your Education

High School / GED

Associate

Bachelor's

Master's

Doctorate

online courses for Tire Technicians that you may like

If you are not ready to pass the certification program but still want to improve your skills, these online courses may help.

Advertising Disclosure

Customer Service

(4,889)

How to Approach New Customers and Maintain Existing Ones...

View Details on Udemy

Start Improving Customer Service

(2,025)

Creating a Customer Service advantage in Your department or business through communication and Customer Management. ..

View Details on Udemy

Customer Service Mastery: Delight Every Customer

(11,073)

Master Customer Service using this practical customer care course...

View Details on Udemy

The Customer: Build a Customer Service Strategy (BITE SIZE)

(4,141)

For you and your team to be successful in providing great customer service, start by putting your customer first...

View Details on Udemy

Customer Service: Keep 'em coming back!

(1,980)

How to give the best customer service in your industry and keep those customers raving about your business...

View Details on Udemy

Fundamentals of Logistics, Supply Chain & Customer Service

(1,048)

Learn Logistics, Supply Chain and Customer Service. 3 Courses in 1...

View Details on Udemy

Brilliant Customer Service: How to Impress your Customers!

(9,347)

Enhance your customer support and truly differentiate yourself from your competition!...

View Details on Udemy

Customer Service Training Keys To Satisfy Your Customers

An introduction to customer service and its importance in any business. ..

View Details on Udemy

Customer Service, Customer Support, And Customer Experience

Customer service, customer support, and customer experience training. Loyal clients through world-class customer service...

View Details on Udemy

[2022] Customer Service 2.0: Learn Digital Customer Service

(1,962)

Used by Chase, Intel, & more! Learn soft skills, social media customer service, diagnosing user problems, & more...

View Details on Udemy

Your Customer Service Toolbox: Best Practices for Beginners

Excel as a front-line customer service agent using problem-solving & relationship-building skills, etiquette, and more...

View Details on Udemy

SAP Customer Service (CS/SM) - Service Management module

Real World SAP CS and SD, Repair Orders, Service Orders, Service Contracts...

View Details on Udemy

Customer Service Success: Take Your Skills to the Next Level

Excel at customer relationship management Improve your soft skills Create positive experiences to wow your customers. ..

View Details on Udemy

Customer Service: Soft Skills Fundamentals

(14,400)

How to keep your head when everyone else is losing theirs...

View Details on Udemy

Customer Service English Essentials

(3,879)

Learn the English phrases, sentences, and tips you'll need to handle customer service situations over the phone...

View Details on Udemy

Zendesk for Customer Service Agents Training Course

How to provide great customer support using Zendesk, a course for beginners...

View Details on Udemy

The Complete Guide to Service Portal in ServiceNow

(1,278)

Learn how to configure, customize, and build Service Portals in ServiceNow!...

View Details on Udemy

Customer Service: How to sell more without advertising

Learn how to create a customer experience that earns you customer loyalty and creates word of mouth advertising...

View Details on Udemy

The Customer: How to Understand Their Needs (BITE SIZE)

(21,113)

Be guided on understanding the modern customer and how their needs have changed over time. ..

View Details on Udemy

Java Web Services

(8,063)

Learn how to design, create, consume and secure SOAP and REST web services from scratch in easy steps...

View Details on Udemy

Updated September 9, 2021

Business training centers on Butlerova street - Moscow

5 places and 8 more nearby

  • training centers for business professions - establishments in the city of Moscow;
  • we have found 5 training centers for you on Butlerova Street;
  • training centers for business professions - addresses on the map, user reviews with ratings and photos.
  • Professional courses

  • metro area
  • Rating

  • There are promotions
  • Online appointment
  • Next to me
  • around the clock
  • Open now
  • Will be open for 2 more hours
  • With reviews
  • With photo
  • Rating 4+
  • Street: Butlerova street
  • Sorting DefaultBy price ➚By price ➘Best firstBy distance
  • 0Other filters

  • A

  • S

  • R

  • R

  • W

  • D

  • B

  • M

  • T

  • D

  • M

  • and

No more places matching the filter conditions

Tire training | Tire fitting courses

Tire fitting courses are in high demand, as are tire fitters themselves (tire fitters). Individual specialists are increasingly required for straightening and rolling discs, changing tires, and repairing them.

Universal tire fitters and tire fitters who know how to find an approach not only to cars, but also commercial vehicles, including special equipment, buses, "heavyweights" - trucks, road trains, tractors, are especially valued.

Tire fitting services are relevant in a variety of situations, for example:

  • A tire has been punctured.
  • Tire "makes friends" with a nail or other sharp object.
  • Uneven tire wear detected.
  • Worried about tire imbalance.
  • It is necessary to straighten cast or steel rims, seal the rim sides.

Common mistakes in tire fitting and balancing

Responsible training in tire fitting and balancing helps to avoid a number of mistakes, among them:

  • Incorrect vehicle lifting.
  • Error 1. One powerful rolling jack is used ... and the geometry of the car changes. Security and manageability are at risk.
  • Mistake 2. Two regular rhombic jacks are used. Synchronizing their work is unrealistic. But to “kill” both the lifting equipment and the vehicle at once in this way is elementary. Common breakdowns of equipment in this case are “demolished” steps, and the wings and thresholds of a car can simply “fly”.
  • Tire markings. It's no secret that according to the tire fitting technology, it is impossible to rearrange not only the rear and front tires, but also the left and right tires. This is due to the fact that the old rubber has already formed the so-called "run-in" contact spots with the roadway. If the contact patches are broken, riding becomes unsafe. But inexperienced tire fitters or those who are in a hurry and do not attach importance to this detail often, alas, ignore this point.
  • Wrong inflation pressure. You don't have to bother and download "dvoechka" on any wheels. But this is a very unprofessional tactic. Each vehicle has its own wheel inflation scheme. Most often, it is indicated by the manufacturer on the gas tank flap. By the way, an under-inflated rather than an over-inflated tire is the most dangerous, since it is a low-pressure tire that is most vulnerable to punctures, it bulges and becomes a kind of “magnet” for nails and other objects with a sharp “character” that may meet on the way.
  • Use of poorly calibrated machines. Even if the load on the balancing equipment in the workshop is not very high, it is recommended to calibrate the machines at least once a season. If the loads are serious, then the calibration frequency should be increased altogether. If calibration is not performed, accuracy, and hence the proper result when performing tire fitting work, should not be expected.

Ideally, a specialist who has undergone comprehensive training in tire fitting and wheel balancing should have the following things bounce off their “teeth”:

    • Rules, specific operation of lifting, tire fitting, balancing equipment, tools, "consumables". Including, the study of the specifics of interaction with machines, boosters for explosive tire inflation, jacks, vulcanizers, weights, harnesses, fungi for tire repair.
    • Tread and blade cutting technique.
    • Types and marking of wheels, tires.
    • Methods for diagnosing wheel defects.
    • Technology of dismantling and installation of wheels on vehicles.
    • Wheel restoration technology (discs, tubes, tires), balancing, re-studding tires, rolling and straightening disks, including explanatory tire fitting courses - this is a mandatory training in vibration diagnostics, dynamic balancing (imbalance correction).

      Online courses

      One of the problems, if you want to get comprehensive knowledge and improve your skills in the field of tire fitting, is to find a suitable training center. Still, the direction is highly specialized, and it is not so easy to find it near the house. But thanks to modern technology, there is no need to look for tire fitting courses in Tyumen, a specific area of ​​\u200b\u200bthe vast St. Petersburg, or even more so Moscow. You can purchase access to the electronic interactive program Tires, wheels and tire fitting on the ELECTUDE platform. Classes are available from anywhere in Russia, and not only in Russia, but also in other countries (the course organizers have representative offices in Belarus, Kazakhstan, Ukraine).

      The software product is focused on modular learning. The program includes 16 training modules. Particular emphasis is placed on the arrangement of vehicle wheels, service operations, including maintenance and operation of discs, tires, tire pressure monitoring system. Estimated time for studying the material is 10 hours. But please note: this is an average time. Everyone can work at the most convenient rhythm for themselves and master the program at a more intensive or “stretched” pace.

      In addition, it is important to understand that this is not just training, but a comprehensive certification system. Therefore, service station training centers have every opportunity to not only train specialists, but also organize an objective assessment of their competencies, and select worthy personnel for the tire repair area.


      Learn more