|
|
|||||
| Home -- Companies -- Hi-Tech Abrasives Inc |
|
|
|
|
 ,LtdCopyright ©Abrasivesunion 2006. All rights reserved Page rendered in 0.0240 seconds |
备案序号:豫B2-20100036-2
HI-TECH ABRASIVES INC. / ABRASIFS HI-TECH INC. is a Non-distributing corporation with 50 or fewer shareholders corporation type, which located at 295 MONTEE DE LIESSE ST-LAURENT QC h5T 1P5 Canada. It was registered on 12-Jul-1990, the corporation's bn is 122062573RC0001 and corporation number is 2625466. There is one director of this company. This corporation record status is : Active . Hi-tech Abrasives Inc. / Abrasifs Hi-tech Inc. has been running for 32 years 4 months, and 22 days since it incoporated.
Corporation Number
2625466
Business No.
122062573RC0001
Date of Incorporation
Canada Business Corporations Act - 1990-07-12
Record Status
Active
Type
Non-distributing corporation with 50 or fewer shareholders
Corporation Name History
1990-07-12 to Present
HI-TECH ABRASIVES INC.
1990-07-12 to Present
ABRASIFS HI-TECH INC.
Office Address
295 MONTEE DE LIESSE
ST-LAURENT QC h5T 1P5
Canada
updated on
2022-09-25
Item
Date
Anniversary Date (MM-DD)
07-12
Annual Filing Period (MM-DD)
07-12 to 09-10
Date of Last Annual Meeting
2022-06-15
Name
Address
GAETAN ST-LAURENT
100 Chemin des Rocailles
Laval QC H7Y 0A1
Canada
Similar name companies of other country
Advertisement
Recently established companies
Visited Companies
MIRKA world leader in surface finishing technology.
These are premium abrasives Mirka ABRANET ACE, Q.
SILVER ACE, GOLD, IRIDIUM, NOVASTAR.
Try, grind with pleasure with good material.
Recommended for purchase!
| Article: ABRANET-125/30-10-AM | ||
| Article: ABRANET-125/25-5-AM | ||
| Article: ABRANET ACE-150/35-5-AM | ||
| Article: ABRANET ACE-150/30-10-AM | ||
| Article: GOLD-150/25-5-AM | ||
| Article: Iridium-150/30-3-AM | ||
| Code: Novastar-150/30-3-AM |
| |
| Article: Iridium-150/20/5-AM |
View All Abrasives in Test Sets
View in the catalog with prices:
All Mirka 9 grinders0009
All Abrasives / Abrasives Mirka
Mirka world leader in surface finishing technology.
Wide range of sanding solutions for surface finishing and microfinishing. High-tech abrasives for professionals in any industry. Specializing in flexible loose, mesh and non-woven abrasives for dust-free sanding.
Mirka Abranet is a mesh abrasive for dust-free sanding, ideal for fillers, primers, varnishes, composites and many other materials. Compared to conventional paper-based abrasives, it has high performance. For dry machine and hand sanding.
Mirka Abranet Ace is a ceramic grit mesh abrasive with excellent cutting properties and high productivity. Specially designed for hard surfaces. When sanding hard putties, composites, plastics, hardwoods, metals, it has a higher productivity and resource compared to traditional Abranet.
Mirka Abranet Ace HD (Heavy Duty) - for sanding metal, carbon fiber, hard wood, removing old paintwork on metal, etc. Recommended for use with powerful rotary orbital machines with an orbit of 5 mm or more.
Mirka Abranet Max Flap Disc is a unique 125mm (40, 60-80 grit) flap disc with a reinforced mesh backing that provides high performance without clogging. The resource of the abrasive is higher than analogues, the action is more aggressive.
Mirka Autonet - mesh abrasive for dust-free sanding. Designed specifically for car body repair. Particularly effective in the processing of plastic parts. For dry hand and machine sanding.
Mirka Iridium is a premium paper based abrasive for efficient and high speed sanding. The unique properties of the dust-repellent coating prevent clogging and clumping. Long retains the original aggressiveness. Efficient dust removal is carried out through a combination of holes Multihole.
Mirka Novastar is a super tough premium film based abrasive designed for long lasting and productive sanding. Outstanding cutting properties in coarse grains and excellent surface finish in fine grains allow you to get the job done quickly.
Efficient dust removal is carried out through a combination of holes Multihole.
Mirka Q.Silver is a universal abrasive on a flexible and durable paper backing. Excellent for sanding wood, paintwork, putty, composites, as well as aluminum and stainless steel.
Mirka Abralon is a unique multi-functional material designed for processing both flat and profiled surfaces. The patented elastic structure makes it possible to achieve a very smooth and uniform surface profile with a high density of lines. The greatest efficiency is achieved with wet grinding. Ideal for matting plastics, lacquers, primers before applying a base coat, for preparing a top coat for polishing, sanding quartz glass, etc. For dry and wet sanding, with a machine and by hand.
Mirka Gold, GOLD Multihole, GOLD SOFT Classic paper based abrasive. Ideal for sanding operations in body repair and woodworking. Even more efficient dust extraction is achieved through the new combination of Multiholes.
Mirka Mirlon Total is an elastic non-woven polyamide fiber abrasive produced using the innovative Total Coating™ coating technology. Has increased aggressiveness compared to Mirlon material, works faster and gives a denser surface texture. It has high strength and a long service life due to its open and elastic structure and reinforced fibers. Does not clog with grinding products. Used in manual wet and dry grinding modes.
Mirka Mirlon is a flexible sanding material with aluminum oxide grains fixed on a three-dimensional polyamide non-woven fabric. Suitable for processing both flat and complex curved and profiled surfaces. Ideal for matting operations and surface preparation for the application of the next coat of paint. It is applied both in dry, so damp mode of manual or machine grinding.
View All Abrasive / grinding materials Mirka
View in the catalog with prices All HITS grinding materials Mirka
Feedback on Test kit MIX 30 pcs HIT! Mirka Novastar 150 mm 121 holes P 80, 120, 180
Mirka Novastar
Pros: Excellent quality.
Cons: Good afternoon. I am writing about Mirka Novastar. I have DEROS 680CV. This abrasive was created for this grinder. Grinds great. Not afraid of sharp edges, corners. Good on artificial stone. A well-thought-out product will serve us for a long time and the manufacturer is responsible for the quality. The kit is convenient to buy for those who do not need to grind a lot every day and 30 pieces will last me personally for a long time. Commentary: Work with a good tool and abrasive.
Grisha Star
Review for Sanding material for mesh synth. based Mirka ABRANET ACE
Thin section nets
Advantages: Durability, efficiency, not forgotten by dust, without dusty work. Weaknesses: No
Comment: I work with hardwoods oak, beech, ash. When I discovered Sanding material on a mesh synthetic basis, Mirka was pleasantly surprised by the performance of this material.
It costs a little more than Chinese abrasives, but it lasts ten times longer. Sergey
Polis with MIRKA
View in the Catalog with prices all the grinds of Mirka
View all grinders of Mirka
View in the Catalog with prices all the vacuum cleaners of the world
View all abrasive / grinding materials of the world 9000
Manufactured by Mirka (Finland).
All Mirka products are manufactured in Finland, over 90% of which are exported and sold to more than 80 countries around the world. Mirka has many years of experience in developing and manufacturing high quality abrasives and abrasives for true dust free sanding. Innovative high-tech manufacturing methods allow Mirka to create highly efficient and ergonomic sanding and polishing tools.
The news was prepared by Technical Editors Irina Kornilova and Anna Merenkova.
The sanding process accounts for approximately 45% of the time spent, and the cost of abrasives is only 2% of the total repair cost. Therefore, it is very important to select the correct, high-quality and most effective abrasive materials.
Depending on the type of work, in order to reduce grinding time and productivity, the abrasives of the Portuguese company Indasa are divided into 3 lines according to their intended purpose.
Abrasive composition:
1. Base - latex paper.
2. Abrasive particles (aluminum oxide, silicon carbide, zirconium).
3. Base layer (synthetic resin).
4.Fixing layer (bakelite hard or semi-elastic synthetic resin).
5.Anti-clogging coating (calcium stearate or zinc stearate).
Red Line is represented by the following products:
RhynoWet RedLine - abrasives for working "wet" on strong, elastic paper with a special latex coating that prevents the sheet from slipping out of the hands. "Closed" type of grain arrangement
allows the use of water technology.
RhynaLox, RhynoDry and RhynoDry Plus RedLine are high-tech materials specially designed for professional dry-clean car repair, the main advantages of which are wear resistance and excellent surface finish.
clogging of the abrasive and the unique properties of the binder provide an optimal ratio of strength and cutting ability.
Line Plus is represented by the following products:
RhynoWet PlusLine - Abrasives for wet work on waterproof, strong paper. A special latex coating prevents the sheet from slipping out of your hands. It is characterized by high wear resistance, excellent cutting properties and processing quality.
RhynaLox PlusLine - Materials designed for dry surface treatment. They have a semi-closed type of grain arrangement. The base of the paper is impregnated with latex, and a particularly elastic resin is used as a binder. This processing allows you to use an abrasive with a thinner and more flexible base without loss and effectively use the PlusLine for sanding complex, shaped elements, processing soft materials and grinders and other devices.
White Line is represented by the following products:
RhynoWet WhiteLine is a wet sander for water-resistant paper with a special latex coating to prevent the paper from slipping out of your hands.
of Employees:
hi-tech.ca/ 
