This post contains affiliate links. Read the full disclosure here.
Okay, I know this sounds very creepy, to say the least, but when you think of how pissed off some people can make you get, then you will come to know that giving them a flat tire should be the least mayhem that should befall them.
Disclaimer: Before I go into any further detail on how to inflict damage to an enemy’s tire, kindly note that you are personally responsible for any trouble that might arise as a result of this action you are about to carry out.
Also, note that this website will not be held accountable in any way possible for your actions as a result of the content shared on this website. I was responsible for my actions, and so should you. (Read Also:Can You Use Jack Stands On Pinch Welds?)
Having said all that, I will be telling you the story behind my first deflating escapade in the steps below.
Table Of Contents
1 Similar PostsIn my own case, I felt the reason was more than justifiable due to the event that leads up to this act.
My neighbor had a very annoying habit of bringing home hookers every night, I mean every damn night! If bringing home hookers was the problem, then there wouldn’t have been a problem at all, but rather he would hold a mini-party before they got down to their real business (if you know what I mean).
Read Also: How To Catch Someone Putting Nails In Your Tire
I tried explaining to him that I worked remotely most time and that I did most of my work when people are asleep because of the peace and tranquility the night brings, but it all fell on deaf ears.
Their business (if you know what I mean) was very loud, and it lasted deep into the night. The only thought I could conjure then was to restrict his movement anytime he was about to go out, and what better way to go than to deflate their wheels!
Step 2: You Must Have Courage As Your Back UpCarrying this out was no small feat I tell you.
Lots of items needed to be checked, but at the top of my list was courage.
Could I really carry this out? After giving it a lot of thought, I felt I had to, at least for the sake of my sanity. My workload load was piling up, and since my neighbor wasn’t given to reason, I felt I had to go ahead with my plans. (Read Also: Can I Use Tire Foam To Clean Engine?)
If you don’t have the courage to back yourself up on your set-out plan, you might as well just forget about the whole idea, this is because you need to get every aspect spot-on.
Step 3: Get A Box Of 3-Inch NailsThe next thing I did was to get a box of 3-inch nails, I aligned some of them just underneath the front tires, and then I went inside.
I only wanted to cause minimal damage so I placed them at just one of the tires, and as you are about to find out, it turned out I made the right decision. (Read Also: How Long Does A Nail Have To Be To Puncture A Tire?)
Step 4: Wait For The Outcome Of Your Evil DeedsThen came that part of the night when my neighbor was to go on his usual whore shopping, I peeped at my window and watched as he carelessly hopped into his car, and all of a sudden, I heard a loud pop! Sound.
My neighbor got down from his truck and started cursing. He looked round to see if he could catch the miscreant who punctured his tired, but there I was, peeping from the side of my window.
Step 5: Deal With Your ConscienceAs it turned out to be, my neighbor ordered an Uber ride, which would have made all my effort in vain, but alas he didn’t return until the next morning. I had the night to myself, it was peaceful and devoid of any form of noise, but my heart was not at peace.
Read Also: How To Prove Someone Slashed Your Tires
It then occurred to me that I had been a tad selfish about the whole thing, and didn’t even think of the cost it would have on his purse.
To maintain a clear conscience, I needed for my task, I concluded within myself that I would man up to him the following day and set the record straight.
Step 6: Make AmendsWhen he walked into his apartment, I took a little time of my own to rehearse what I was going to say to him, and there I was, sweating profusely as I tried to bring myself to knock on his door.
When I finally did, he came out and we exchanged normal pleasantries.
I tried explaining the events of the night before whilst leaving the part where I was sorely responsible for the disaster I brought on his truck tires.(Read Also: Can Tire Pressure Sensors Leak Air?Find Out Now)
I really can’t remember the exact details of the whole conversation we had, but at the end of the short conversation we had, I did let him know how peaceful my night was in his absence and we laughed over it.
I offered to pay for the damage, but he declined and said he would take care of it himself.
That answer wasn’t enough for me, so I decided to drop a $200 bill in the spot where he drops his house keys, at least to clear every form of guilt I might have on my conscience.
After that ordeal, I got to discover that there are safer ways of puncturing a tire without having to destroy the tube. However, except you have lots of time on your hands, you shouldn’t consider this procedure.
Unscrew or remove the screw from the needle inside the valve stem. If you are familiar with car tires, this shouldn’t be a problem for you.
Step 2Cut off the valve stem. You can also choose to remove the stem cover and press the needle-looking core that will be exposed when you remove the stem cover, but you should note that this process will generate a lot of noise due to the air expelling from the tube, and since you wouldn’t want to be noticed, it wouldn’t be a good idea.
Once again, do note that this act is a criminal offense, and is likely to attract legal action. Learn to follow the line of peace as much as you can. No peace or satisfaction comes from carrying out evil on another man. (Read Also: Can Bike Tires Pop? Find Out Now)
Can You Pop A Tire With A Knife?Yes, you can, but before you carry out such a deed, you should note that it makes a loud sound, so if keeping your deed, a secret, then I suggest you seek another option.
You should also know that most states do not allow patches on tires, and as such, you will be sending your prey to amazon to shop for new tires after the deed might have been done. Do well to think twice before carrying out this stunt.
Watch this video on YouTube
One last thing, you also stand a very high risk of injuring yourself in the process. Puncturing a tire is not as easy as it sounds, and unless you have a very strong Swiss blade, don’t even think of the idea.
So What Kind Of Knife Will Cut A Tire?Just like I stated in the FAQ above, you will require a very strong Swiss knife to carry out this act. Using your conventional kitchen knife can break in the process of making the puncture, then injuring you in the process. You really don’t have to take that risk, do you?
Can I Go To Jail If I Get Caught Slashing A Tire?Hmmm.. I actually thought of this possibility before I carried out this act, and you should too.
You are unlikely to go to jail as the act you’re about to commit is called vandalism.
However, there is a huge possibility that you would be arrested and that on its own is a stain on your record especially if you didn’t have any.
It also wouldn’t matter if you succeed or not in the act, but the fact will remain that once you get caught in the process, there is a huge chance that you will be arrested.
You should also note that if the tires are worth close to $500, then you might be going to jail for up to 90 days and might also be required to pay a fine of $250. So you might want to think twice before carrying out such an act.
Will Slashing The Tires Set Off The Car’s Alarm?I actually didn’t consider this factor, but you should. The alarm of my neighbor’s car didn’t go off, and from the research, I have made, it is highly unlikely that a car’s alarm will go off as a result of your actions.
This is because most alarms would have to possess a sensitive tilt sensor for them to go off.
Some alarms wouldn’t even go off if you kicked at it really hard with your foot.
So as long as the car is stable all through the process, you are unlikely to set off the alarm. (Read Also: Can My Tire Fall Off With A Bad Wheel Bearing? Find Out Now)
What Will Happen If I Choose To Slash All Four Tires?Common don’t be mean. I don’t know what that fella has done to you, but all four tires? Common! Well, if you still want to go ahead and slash all four tires of your victim, you should know that the terms of your victim’s insurance policy are likely to come into play if all four tires are slashed.
So you might actually be doing your victim a long-term favor by gunning for all four of his/her tires. (Read Also: Does Tire Sealant Expire?)
Apart From knives And Nails, What Else Can Puncture Tires?Several factors come into play when it comes to having a flat tire, and some of them include the following;
1.
Damaged Valve StemValve stem issues are another common reason for tire issues. The valve stem is the minuscule bulge from your tire that you unscrew when you have to put air in it. A spoilt or eroded valve stem can make air spill out of the tire, causing it to go flat. Free or dirt-obstructed stems can likewise make tires lose air.
2. Leaks From Tire BeadsIn some cases, air will spill from the tire dot, which is the edge of the tire that lays on the rim. This leakage can make the tire flat after some time.
To check if there is an issue with the tire bead, spray your wheel framework with foamy water. If a constant flow of small air pockets or bubbles arises, you most likely have a tire bead leak.
3. Separation Of Tire And Rim Caused By CollisionThis separation typically happens when your tire hits a curb or when you rub the wheel strongly against the walkway while stopping or parking.
The tire slips somewhat from the rim, causing a moderate loss of air over the long run.
This is by and large not something you can fix all alone, but rather seek the services of a mechanic without any problem, at a little cost to your purse.
Vehicle owners with aluminum wheels are urged to check their tire pressure consistently. If the leakage continues, take your vehicle to a mechanic for an expert fix.
5. Unexpected EventualitiesAt times it’s absolutely impossible to forestall a punctured tire. Learn to drive securely and cautiously, and follow the appropriate methodology.
If you experience a startling block on the road: don’t pummel on the brakes, allow the vehicle to naturally come to a stop while steering to the roadside, turn on your risk lights, and don’t endeavor to change the tire yourself except if you are a few feet away from moving traffic. (Read Also:Can You Jack Up A Truck By The Leaf Springs?)
Conclusion – How To Give Someone A Flat Tire Without Them KnowingIs it really worth it? Is it an act you will look back and be proud of? In my own honest opinion, I strongly feel that you can easily overlook whatever grievance you might have towards your target and learn to move on.
The world would be a better place if we learn to overlook faults.
One more question, I hope you will feel cool if someone else slashed your own tires, give it a thought, will you?
If the process of cutting tires causes loud noise, it will attract attention. Focus on learning the process of cutting the tires quietly and without attention.
Cutting a tire or puncturing it is very difficult. Because tires have incredible durability. They withstand the weight of the vehicle and everything in the car, rolling at high speeds on highways or bumpy roads. So many people have tried to use power and choose the right way but nothing is sure you will damage it.
The best way to reduce tires without making noise is to puncture. It is not entirely reliable because it depends on the type of tire you want to puncture but is currently the best solution. You should go away after doing that.
The tire will look normal as soon as you puncture, the tire will keep getting flat continuously until the owner replaced a new one. Because such a puncture is difficult to find, it cannot be detected immediately.
There are many methods to repair punctured tires such as cold patch, hot patch, self-filling. The methods will have different costs. But when repaired tires are not good if the owner goes at high speed, especially highways will make things worse. Not every punctured tire can be repaired.
You can use sharp. It must be strong enough not to be bent or broken and very sharp.
The diameter must be large enough. If it is already used, sharpen it more aggressively. You want it to be easier to puncture the tire than you can put it on a fire until it glows, then dip into the engine oil about 10 times. However, this method should not be used too much as objects may be brittle.
Make it easier by lubricating it.
To carry this item you should wrap with plastic bags, paper, and tape to ensure your own safety.
You should not go by car in this case, you walk and check around you and use the item to press on the tires. Do the same thing on the other side of the car if you want. After doing so, put it in your pocket so others don’t have evidence.
We recommend that you do each one at a time, and this should be methodical and extremely careful. You have to look natural, they won’t notice what you do. For example, one hand holding the phone pretends to text and the other hand performs.
Always be careful and check your camera, check to see if anyone is around or in a car. Doing it at night would be a lot easier, with fewer people going in and out at the time. Wear a hat and mask to prevent others from knowing who you are. The area where you puncture the tires may be on watch, trying not to draw attention to them, which is not safe for you.
Be as careful as you can and don’t let the police catch you.
Because nowadays there are many automakers born with very high values. The police will rely on the damage you caused to criminal prosecution and administrative fines, or worse, you could be put in jail for your behavior.
You can also use a knife to cut the tires. But with the condition that the knife is brand new and extremely sharp. You should really sharpen 2 sides of the knife. Take off your jacket and roll it onto the tire then push the knife over it. Your coat will make noise, so this cannot be done while someone is there even at a distance.
This way, when you use a knife to cut a tire, the tire will deflate a lot faster, perhaps immediately. And it is completely irreparable. Owners will have to replace the new.
For convenience, you should have a good idea of time. The small car will take 30 minutes for the tire to deflate after you puncture, the big truck will take about 8 hours.
During this time the driver will go somewhere and think the tire is cut there.
Or the tire has trouble getting into traffic. Even if drivers stop immediately when they feel something is wrong, it is not possible to know when and where their tires were cut.
Go at high speed, the car will turn around when the tires are flat and the driver will recognize immediately. It will be dangerous for the vehicle and the person in the car.
What’s worse is that old truck tires after being punctured a number of times they can explode.
Long-term observation and monitoring will help you determine when and how to act. To make everything perfect, you need to prepare carefully. You need to use the best and most suitable item. Do not hurry or sketchy. It all affects you. The most important thing is not to let the camera save you. It will be great evidence to accuse you. The owner of the car can sue you.
After doing so, do not tell or brag to anyone. There is no explanation for your action. But you should not trust anyone, they may resent and denounce you or tell the victim.
It was worse.
Do not leave any evidence, especially the items you use to cut the tires. After done, you must bring it back. Because tires are extremely necessary and expensive, they can endanger the vehicle’s owner and those around them. People will be angry when they find out their tires are cut and of course, will alert the police.
Above we talked about how to slash tires without getting caught. Hope you have found the best solution and it is useful for you. Wish you carefully and success. Thank you for reading our article. See you again.
Vladimir Gavrilov
Estimated reading time: 4 minutes
9701
Category: Driving technique
Cars often get stuck in wet snow and begin to skid helplessly.
How to get out of the trap without resorting to special equipment, such as a winch, rope and snow chains? nine0005
Heavy snowfalls and thaws turn courtyard areas into a snow trap. The softened snow is pressed through, and the outgoing transport rolls deep ruts. The longer the winter, the deeper they get. As a result, a simple entry and exit turn into a test for equipment. On flat areas, you can skid so much that you have to tinker hard until you pull the car onto a free road. How to seamlessly bypass the rut?
Often after snowfalls you see how during slippage some motorists turn the wheels until the clutch burns out. Others are more cautious and try to rock the car. If this does not help to get out, then they put planks, branches of shrubs and rags from the nearest garbage cans under the wheels. But such devices do not always work. Experienced drivers who are well acquainted with the peculiarities of Russian winters advise getting out of captivity in a different way: on flat tires.
nine0005
If the yards are cleaned even a little and the main problem is hollows and ruts where the wheels are hopelessly slipping, then you can deflate the tires by half. Enough about 1.2-1.0 atmospheres to get a good hold. About the same pressure is used by jeepers to travel through mud and sand.
The physics of the process can be described as follows. A half-flat tire becomes limp and spreads under the weight of the car. The contact patch increases, and with it the pressure of the machine on the surface decreases. But the main thing is different. The flattened rubber forms an additional lip that works like snow chains wrapped around a tyre. The edge cuts into the ice and prevents the wheel from slipping. In addition, an additional shoulder of force is created, the rubber adheres more closely to the surface, breaks through the water film, scratches behind the ice tread and creates friction force. The larger the rubber edge, the less likely it is to break the wheels into slip.
Therefore, on half-flat wheels, the car is easier to get out of a slippery rut. nine0005
But rutting is a danger not only at home, but also on an intercity highway. The track there is much smaller and only about two centimeters high, but its tortuosity and torn edges cause problems with directional stability. Due to transverse vibrations, yaws are formed. For example, a car rushes straight, and then gets into a section with torn edges and rushes about in shaking, so much so that the steering wheel breaks out of your hands. It happens that due to vibrations, the front wheels jump out of the rut, while the rear ones remain in it. At this point, the car may skid. And it depends only on the skill of the driver whether he can straighten the car. nine0005
Yaw problems can be alleviated by lowering tire pressure. If the tires are inflated to about 1.5 atm, then they react less to buildup and, due to softness, smooth out side slips that cause yaws. True, it is impossible to accelerate on under-inflated wheels over 80 km / h.
Otherwise, a tire that has lost its rigidity during sudden braking or during lateral overloads can break and jump off the rim, which will lead to a sharp drop in pressure and loss of control.
Under-inflated wheels are also useful for driving on snow. For example, if the driveways to rural houses are skidded, but you need to get to the dacha, then you can lower the tire pressure to 0.5 atm. Then the contact patch of the wheels will increase by more than one and a half times and the pressure on the surface will decrease. The car will fall through less and be able to drive through a snowy area. The owners of off-road vehicles are aware of this technique and travel on flat tires not only on virgin snow, but also on loose sand.
True, with such pressure it is absolutely impossible to slip and accelerate over 40 km / h, since tires that are three-quarters flat cease to hold loads and can be easily disassembled if the accelerator is inaccurately acted upon. As soon as the snow-covered area has been passed, the pressure must be raised again to the values prescribed by the instructions.
tips for motorists how to survive the winter
Next article
Media news2
Look for a puncture with soap
A puncture, shoulder or side cut - experienced tire workers will detect such problematic moments quite quickly, even without removing the wheel from the car.
Another thing is hidden defects, for the detection of which it will be necessary to resort to a number of tricks.
What will the pros do? First, he pumps the problem wheel to 1.5 - 2 atmospheres and tries to determine the place of the puncture or cut by ear - it is very likely that the tire will emit a characteristic whistle at the place of the defect. If this tactic does not help, we turn to water procedures with soap. First, we will try to identify a puncture with little blood - we take a soapy solution and pour it over the tire. nine0005
If we are talking about the front wheel, you can not even dismantle it, but jack up the car and turn it slowly, spraying the rubber with soapy water. Our goal is to notice the appearance of foam and bubbles on the tire. Sometimes the problem area helps to identify the blurring and simultaneous pumping of the tire with a pump. The puncture did not give itself away again? You can try to remove the wheel and lower it entirely into a container of water, pressing on the sidewalls and again looking for bubbles.
Look for a hidden defect from the inside
However, it happens that it is not possible to find the place of damage during the water-soap procedures. There may be several reasons. For example, a tire can be etched with air due to a very small wire, needle or stud that is not visible to the naked eye, but which can still be felt.
To do this, you will have to disassemble the wheel, arm yourself with a rag or napkin and run it along the inner area of the tire. It is very likely that the fabric will catch on this inconspicuous sharp object. nine0005
Sometimes air bleeding can also cause internal damage to the cord, which happens due to careless driving on broken roads. It even happens that on a "spike" when driving through pits, the heel of a spike (mostly hand-made) pierces the tire from the inside. Be that as it may, if you find a sharp object sticking out from inside the tire, look at the situation. If the matter is in a small carnation or a needle, we repair it.
If damage to the cord is detected, as well as a hernia, it is recommended to replace the tire - further operation is unsafe. nine0005
Micro cracks
Sometimes a problem spot in a tire cannot be identified either with a foam solution or by feeling the inner surface of the tire. In this case, pay attention to the condition of the sidewalls.
If the tire is old or the owner practices parking close to the curbs, and also stores the wheels on the balcony under the scorching sun, microcracks may form on the sidewalls.
Through them, moisture enters the cord, which is fraught with deformation of the entire frame. Unfortunately, cracks, like hernias, are not repairable. Therefore, if the recesses are small, no more than 1-2 mm deep, we put such wheels on the rear axle and drive for some time exclusively in the city (not at high speeds). Or, as an option, you can contact the tire shop, where such defects will be eliminated on a special machine by melting rubber. But the office most likely will not give guarantees for such work.
If the cracks are larger than 2 mm, we already definitely throw out such a wheel and put a new one. nine0005
See nipple
It is quite common for a tire to deflate also because of a defective nipple. They can break here as metal structural elements (you can verify this by simply moistening the surface of the nipple with saliva and tracking air bubbles).
In this case, to solve the problem, it is enough to turn the metal spool clockwise.
You can also replace the spool, since the process is not difficult, although it requires skill. We unscrew the old spool and immediately install a new one in its place, and we do it quickly, overcoming the pressure of the outgoing air. nine0005
It also happens that air escapes from the rubberized nipple valve. From operation, it can be erased and this will reduce the density of its mating with a metal tube. In this case, again, the road is for you - in tire fitting. There, the wheel is disassembled, the damaged nipple is pulled out with pliers and a new one is installed.
