You may have some old tyres laying around in the garage, yard or garden. Or even there’s a bunch of them piled up at a friends house. Well, what can you do with them I hear you say?
It is possible to make chairs and tables that are fully functional and actually look great believe it or not. This being said, we are going to explore the art of tyre art and how it is used around the world to be a great way to upcycle furniture and make something fun.
So there’s a few things you can do. You can make a basic stool, a rocking chair, a backed chair and even more. There are really no limits on what you can make with these Tyres. The other great thing is that they paint well, so you can pick a colour and they look great!
You can even make an ottoman collection, along with a coffee table and some armchairs for the outdoors. We think this is great because oftentimes people buy new garden furniture but really there is not much need for this. All wooden outdoor furniture rots after a while, and plastic, as we know, is not great for the environment so rtelly we have to think about recycling and also the benefits of having a project.
These will set you back only around $20 for the materials. If you are going to buy one from a vendor, you may be looking at a lot more . $100 may be more the ballpark figure we are talking about. Give tyre decoration a go yourself! It’s super fun! And a great use for old tyres in the garden.
tyre chair painted yellow
So, for this one you have to think about materials fuirst.
For more DIY tips and tricks, find out how to paint on Jute bags. That fabric also goes great with tyre chairs. If you want a lil bit more decor, check out how to clean an oil painting.
For making a tyre sofa, this is a little different, because it obviously has to be bigger. You could begin by measuring the tyres and deciding how big you want them. After you have done this, affix your tyres together for the desired effect and there you have it! This is another great way to make and DIY lounge chairs made out of old tires. I think they look best outdoors cos they are durable and weatherproof, but they can also look quirky indoorts.
This one is easy. Do it how you started with the chair and cut some ply, then you can paint it all one funky colour such as yellow or white.
If you don’t want to do this I have also seen them with plexiglass tops which look good because you get the full effect that it is a type.
unused tyres
how to make chairs with old tires?
You may want a Stanley knife or something larger like a hacksaw if it is a particularly large hacksaw.
by Agnes Williams
In this article, you will know different methods on how to make a tire chair. There is nothing better than knowing how to make a tire chair, especially when you have old tires at home.
Creatively repurposing your tires enables you to create new furniture out of something considered trash. It does not only save money but also lets you design on your own!
How To Make A Chair From Your Old Tire
Before anything else, ensure to clean your old tires thoroughly.
Having clean materials is a must; otherwise, you can get bacteria or infections from dirty tires. You can use water and various cleaning agents for this matter.
After cleaning your tire, you can proceed with choosing which method you would prefer to do.
Method #1. Weaving the seat
Step #1. Drill holes
First, mark and drill 16 holes around the tire. The holes should be parallel and straight so that the weaving process will be easy.
Step #2. Paint
Get some paint with colors depending on your preferences. Start painting the base and the body of your tire. Painting your tire with bright colors is better!
Step #3. Weave
Grab your bungee cords, insert one of the ends onto the first hole, and tie the rope. Pull the other end to the other side of the tire and slip it inside the hole. Tug it inside the adjacent hole under the top of the tire and insert it upwards from the hole.
Repeat the process until the seat is covered.
Copy the same steps for the horizontal weaving process.
After that, attach the tire to another tire. Drill four holes on both tires and screw them together.
Method #2. Creating a chair cushion
Step #1. Cut wood
Initially, cut a circle on plywood (17 inches or 43 cm diameter). Using heavy-duty glue, glue the wood onto the top of your tire. Let it dry for approximately 8 hours.
Step #2. Cut foam
On the other hand, cut another circle on plywood (15 inches or 38 cm diameter). Trace the measurements for the foam and cut it also. Carefully glue them together.
Step #3. Wrap fabric
Wrap the foam with fabric. You can use heavy-duty staplers for this step. Cut excess fabric from the cushion.
Adding designs and painting them is optional, but they give a better look for your tire chair. You can put some buttons on the seat as a design.
Method #3. Making a round sofa from it
Step #1.
Create the lidFor the lid, cut a circle on plywood. The size may vary, depending on the diameter of your tire. Drill four holes on it, one on the top center, one on the bottom center, one on the left-center, and drill one on the right-center.
After that, wrap the lid with foam and fabric. You can use heavy-duty glue, fabric glue, or a heavy-duty stapler.
Step #2. Make the base
In making the base, wrap the tire with foam and fabric. You can use the same method on step one through using the said materials.
Step #3. Create the bottom and the legs
After making the lid and the base, you can make another circle on plywood for the bottom. Wrap the wood with fabric.
For the feet of the tire chair, create four blocks of wood. Attach the parts altogether.
Step #4. Finish with the backrest
Lastly, cut five or six pieces of wood for the backrest. Attach the woods onto the side of the tire chair.
Ensure that there are spaces between each wood.
To attach them, drill the bottom of the wood. Drill the tire also and screw them together.
Note that you should check whether the wood moves or not. If the wood moves, you can use heavy-duty glue to keep them together.
Next, cut a block of foam that can cover the woods and glue it in place. Cover the backrest by sewing fabric onto it.
Why Should You Have A Tire Chair?
Making a tire chair can give off various good things for everyone. Having a tire chair gives you a comfortable seat either indoors or outdoors. Moreover, tire chairs are not costly because you are only recycling your old tires!
Tire recycling does not only enable you to have a new seat without spending much, but it also helps everyone to take care of the environment. It reduces pollution and the volume of tires in landfill spaces.
In short, making tire chairs is the best idea because it helps everyone.
Conclusion
Creativity is all you need when you want to know how to make a tire chair.
You have different choices on what kind of look you would like to give to your old tire. You can weave to make the seat, create your cushion, or you can completely turn your tire into a comfy round sofa!
Since you have already read this guide, you can now start recycling your old tires and enjoy your new tire chair!
If you have an old tire, it is not necessary to throw it away. After all, it can be useful for cooking something useful. For example, it can be a do-it-yourself chair made from a tire.
First clean the tire thoroughly with a cleaning agent and let it dry thoroughly.
Next, the surface should be well primed. For this, there is also a special tool in a spray bottle.
Next, the tire should be painted in your favorite color, well, or suitable for the main interior, using spray paint.
Measure the diameter of the tire chair cover. Having made measurements of the wheel diameter, this size must be transferred to a plywood sheet, dense enough.
Circles should be cut out of the same plywood, or rather two. They will be the top and bottom of the chair.
As you have already noticed in the photo of chairs made of tires with your own hands, such a product must have legs. It is better that these are wheels, small in size, in the amount of four pieces. Thanks to four wheels, your product will be the most stable. At the same time, three wheels will also suffice here.
In order to attach the wheels, this must be done from below. That is, at the bottom of the resulting chair.
The bottom must be glued. Using special construction glue, the base of your chair, along with the wheels attached to it, should be attached to the tire.
After that, the structure must be turned over and allowed to settle, during this period it will dry thoroughly.
Now take the blank that is left. It needs a circle to make the top of the chair.
Also cut out a circle from the foam.
It should be the same diameter as the cut round board. By the way, a circle of foam rubber can be made not necessarily from a single piece, it can be made up of different pieces.
The foam should be sheathed with some kind of fabric. It is clear that you should like its color.
After this, the foam should be attached directly to the top of the chair by gluing the blank with the fabric containing the foam directly to the top of your chair.
Attach the top of your chair to the cover and you've got the most amazing leg stool ever!
In any case, do not throw away old, worn out car tires. After all, they can be used in a very different and interesting, original and unusual way! After all, using it you can make a children's swing, a flower bed, the most original chair ... and much more.
Yes, in fact, the easiest way to make a table out of a tire is. For example, to do this, you should glue a pair of tires, fix glass on top of all this, or choose another material for the countertop.
This variant of the table is perfect for landscaping the terrace.
A low tea table can be made even on wheels. In addition, you can make a small ottoman, or an ottoman table, in which it is convenient to store magazines, remote controls and other trifles.
You can also glue the tire with twine. Make the legs, and you will get a very stylish table, ideal for arranging a country house. In addition, you can go further by making stools and a table for it. You will get a real set!
Attach a soft cushion to the tire and get a soft ottoman. For an option, you can still fit the tires using any fabric. And if you make a little more effort, you will get not just a wonderful ottoman, but a whole real chair, or maybe even a sofa! By the way, if you have a private house and have a terrace on the territory of your backyard, as well as a swimming pool, then you can make a wonderful sun lounger or even several out of tires! Check out a selection of photos and get inspired!
There are different ways to arrange "your" suburban area. Of great interest are the ideas of creating original items from old things that have served their intended purpose.
Craftsmen make furniture from wooden pallets, polypropylene pipes, plastic and wine bottles. New applications are also found for old car tires. They make armchairs, tables, ottomans and even sofas. Practical and durable furniture is used in the garden, for arranging a garage, as an unusual accent in the interior.
Tires can be used uncoated, but more often they are dyed in bright colors, wrapped with jute, sisal, linen, cotton or hemp rope, and pulled with cloth.
Article content:
Car tire rubber contains toxic substances and should not be used in a child's room or in a poorly ventilated area.
But even without this, there is enough space for improvement: in the living room of a private house, on the terrace, in the garage and utility room, in the open air.
The simplest thing that can be made from used car tires is comfortable ottomans for relaxing and gathering with friends. They can be in the form of "pills" covered with a thick rope or with fabric upholstery on legs. Consider several manufacturing options.
First, the tire is cross-wrapped diagonally with a thick cord to block the through hole. Then completely cover the circumference. To do this, the rope is twisted in a spiral, starting from the center of the hole blocked by the cord. The rope is fastened with a glue gun.
Alternatively, 2 plywood discs of the appropriate diameter are used to close the holes in the center. They are attached with screws. Next, the structure is wrapped with a thick rope, fixing with hot glue.
You can make a soft ottoman covered in fabric. To begin with, blanks are made from plywood sheet to close the holes. Then a foam strip is glued to the side of the tire around the entire circumference.
Using a screwdriver, screw the plywood disk from below. Next, they cover the tire with a dense cloth, fastening it with a construction stapler. Legs or wheels are screwed to the bottom plywood.
The remaining disk is wrapped with foam rubber and covered with fabric. The resulting cover is placed on top. It can be fixed with glue.
Several fabric-covered ottomans can be used as a cozy seating area.
Two rails are connected with bolts or screws from the inside. Next, the structure is painted or left as is.
A wooden circle made of MDF or chipboard is nailed on top, which is also painted, and soft bedding is laid. Also, a wooden circle can be covered with foam rubber and fabric.
An excellent set will be obtained from high pouffes and a table. The table is made according to the same principle, only its height is twice as large. A casual white paint job while maintaining a contrasting black tread pattern gives the furniture a stylish look.
Small Tire Tires are wide and perfect for making designer craft boxes and storing small items. Their manufacture is similar to the creation of ottomans, only in addition to the outer skin, they also pay attention to the interior decoration.
For the interior, plain fabrics are used, and for the outer sheathing, bright fabrics with patterns and colors are used. Such cute interior items will be a good idea for a business.
Instead of simple pouffes, you can make chairs with a back and armrests. The backrest rail is also attached to bolts or self-tapping screws. Armrests can be made from strong, thick, varnished branches.
When the structure is assembled, proceed to close the holes in the center.
In addition to the methods already mentioned, weaving can be used. To do this, holes are made in a circle with a drill in increments of no more than 5 cm (more often). Later, a strong rope or cord is threaded through the holes with an awl, interlacing each longitudinal row with the transverse ones. You can experiment with the pattern, especially if you have weaving skills.
Bent steel tubes can be used as armrests. And for weaving instead of rope - soft wire.
Single chairs can be turned into a bench by connecting two sections with a common wooden frame.
You can make spectacular designer furniture from tires and improvised materials. Here are some proofs.
"Auto"-chair of 4 tires on a metal or wooden base. In the manufacture, the techniques already described above are used. All elements are connected with bolts.
Low armchairs with upholstered backs in Art Nouveau style will fit perfectly into the interior of a spacious living room. For manufacturing, one tire is cut in half in diameter. This part will serve as the back.
A strip of thick foam rubber is glued inside. In order for the back to be beautifully raised, two slats-racks are nailed in the center.
For the seat, a wooden disk is cut out, sheathed with foam rubber. Then the entire foam rubber is covered with leatherette. Screw the back and seats and the chair is ready!
The next option is done in a similar way. Only for the back is taken a wide tire, which is attached closely, without rails.
For a chair with a high back, thick wooden slats will serve as a support, which are covered with a piece of foam rubber and covered with fabric. As a result, a brutal basis is not even guessed in the product. Everything looks elegant and stylish.
For the garden, an armchair with a wooden back is left unupholstered.
Even without painting, it looks very aesthetically pleasing.
As a backrest, several tires connected together and placed on edge can be used. They can be attached to the tire serving as a seat using cables or elastic springs. Further tricks for converting waste material into a comfortable resting place can be suggested to you by fantasy or our good example.
Another interesting option for a chair for a private house made of a large tire. In this case, a segment is cut out in the tire, a soft seat is arranged below, and the inner walls are sheathed, and they serve as a back. A stylish combination of materials and a selection of trendy prints will allow you to get an excellent youth chair for watching TV.
Sofa requires car and mini truck tires. Solid tires are used for the base, and cut-off sectors for the back and sides.
Eco-leather or coarse wear-resistant material can be used as upholstery. Such a sofa can be placed in the garage or on the spacious terrace of a private house.
