How to make your tires black again

How to Make Tires Black Again? Step by Step Guide

How to make tires black again is always a concern of many customers for their car. Because after a period of use, under the influence of friction and weather, the tire gradually loses its inherent glossy black appearance. It entails inevitable consequences such as reduced elasticity and longevity.

How to Make Tires Black Again?


  • What causes tire surface damage?
  • Why do we have to blacken tires?
  • What to blacken tires with?
    • 1. Blacken tires with young rubber
    • 2. Use tire polish
    • 3. Polish tires with oil
    • 4. Car interior cleaning solutions
  • How to make tires black again at home in 2023
  • Tips to blacken tires naturally
    • Why should I use tire polish?
    • Tire polishing process
    • A few notes to remember
  • Conclusion

What causes tire surface damage?

For vehicles, tires are one part that often comes into contact with the road surface, so they are subject to the most wear. This point and the impact of weather, dirt, and rain also causes the tire to fade.

A mistake by users is the perception that the blacker the tire, the better the quality. It inadvertently abets businesses and traders of used cars and used tires using solutions and chemicals in the plug list to blacken. They make the tires blacker than all specialized polishes currently available on the market.

The purpose is to attract customers, hitting the blacker mentality. But in return, using too many coloring chemicals for tires will cause the young rubber layer to age. Therefore, after a short time of use, it will lead to tire failure. Then, we must replace them.

Why do we have to blacken tires?

Tires are the part that is in direct contact with the road surface, and the durability of the tires affects the safety of vehicle drivers. Blackening your tires is not only aesthetically pleasing but also offers many other practical benefits:

  • Prevent rubber tire cracking.
  • A well-cared, well-protected tire will increase its toughness and durability throughout use.
  • Blackening the tire will help you move freely without worrying about tire explosion, flat tire, or lack of elasticity.

What to blacken tires with?

Currently, there are many forms of simple tire blackening at home. Car owners can completely manipulate to take care of their car. Here are some of the most common methods of blackening tires:

1. Blacken tires with young rubber

Young rubber (silicon), used in patching and pressing tires, is available at auto repair shops. In addition, silicon also has another use as many people will soak it into a solution to create gloss and elasticity for the tire. However, car owners need to be careful when using this method. Using too much silicon can cause the tire to stiffen and reduce its service life.

2. Use tire polish

It is a commonly used optimization method today. Uses of the solution:

  • Tire polishing
  • Tire blackening
  • Aesthetics increasing


Polish tires with oil

It is one of the simplest and most used tire blackening methods today. The advantage of this method is that it is easy to implement. We need to clean the tires, wait for them to dry, and apply a layer of oil to the wheels.

However, the oil is easily washed away by water. The grip is not long. If done incorrectly, it can cause dangerous slippery phenomena when moving. Besides the ways to blacken tires we mentioned above, there are many other simple forms you can refer to manual blackening of tires with toothpaste or blackening with shoe cleaner. These are materials available at home that are easy to find.

4. Car interior cleaning solutions

The car interior cleaning solution is the accessory you should have to clean your car at home. The cleaning and polishing solution helps to clean and blacken the tires, making them like new and maintaining their shine for a long time.

They also restore the elasticity of rubber and reduce the noise. They are caused by the friction of the tire when the vehicle is rolling on the road and prolong the life of the tire. Cleaning and polishing car tires can prolong the service life and increase the aesthetics of your car. They also help you better observe the silent damage of the tires.

How to make tires black again at home in 2023

  • Step 1: Wash the tires with a specialized tire cleaning solution to remove long-standing stains.
  • Step 2: Mix specialized tire polish according to the manufacturer's instructions.
  • Step 3: Use a specialized brush to sweep the solution onto the tires slowly. So, the solution penetrates and can shine the tire.

When polishing and blackening tires, users must use specialized brushes with hardness and certainty. If you use a brush that is too hard, it will cause the rubber of the tire to be worn away, directly affecting the life of the tire. In addition, when cleaning the tire, remember to wash the dirt track. If there is residue, the solution cannot penetrate the inner tire to create blackness and gloss.

Tips to blacken tires naturally

Avoid using coloring chemicals, glass cleaners, and solutions of unknown origin are essential things for blackening tires. Tire polishing wax is the most appropriate choice.

Why should I use tire polish?

  • Maintenance and prevention of tire corrosion
  • Create a certain blackness, create a glossy and beautiful look for the tire
  • Add an extra layer of protection to the tire surface, helping to prevent harmful UV rays on the surface of the tire
  • Resistant to dust while moving.

Tire polishing process

  • Step 1: Wash the tires. The purpose is to clean the stains, long-standing dust on the car. You can use a specialized tire cleaning solution.
  • Step 2: Mix the solution with water at a certain ratio (recommended rate of the supplier). Or there is a type that does not need to be mixed into the container and used directly.
  • Step 3: Using a dedicated brush, put in the amount of polishing oil, then gently rub it on the tire cover. Let the oil absorb and clean the stain. It only takes about 2-3 minutes for you to complete the maintenance work for the tires.

A few notes to remember

  • Do not use a specialized product to polish motorcycle tires to apply to car tires
  • When you have just applied the solution, it takes time for the solution to dry and soak into the inside of the tire. Then run the car, avoiding the situation that the solution sticks to the body of the car.
  • Do not abuse the chemicals that make the tires black quickly. The cleaning solutions for the windows, car washes for regular cleaning will affect the tire's service life.


Through the above article, we hope that customers have grasped the most basic and accurate tire blackening principle. If you need any further advice or support, please leave a comment below.

How to Make Tires Black Again

Daily travel and long road trips can make the tires black and shiny go dull and gray in no time. Car fans know that untreated and sloppy tires can trigger risk in driving, whereas grey and faded tires compromise the presentation of your amazing vehicle.

Here in this article, we will address how you can make your tires black again without changing them.

Page Contents

Make Tires Black – Why should you?

Tires remain in friction with the road while driving. This friction causes discoloration, cracking and makes the tire lose its spikes. In contrast, the tire’s rubber material loses its elasticity, resulting in the tire losing its durability to friction.

Making tires black means taking routine care of your tire, which also comes with technical benefits. Such as;

  • You can prevent the rubber from cracks early
  • Increasing tire’s durability and toughness
  • Preventing tire from exploding and flattening

Worn-out tires not only look bad, but they also compromise the presentation of your vehicle. Not only that, but it can be life-threatening for the driver as they lose their grip over some time.

Read on to know more because, in today’s DIY tips, you can become a pro at how to make tires black again!

Things to make tires black again – What will you need to follow this tutorial?

Here is a shortlist of what things you need to make your tires brand-new.

  • A water spray, a pipe or a hose, store-bought tire cleaner like dish soap, a microfiber towel, and a scrub brush is essential to clean the tires and rims.
  • Oil is the old-school method to make tires black in one go. Although simple to apply, and cost-effective it is not durable. It makes them slippery once in contact with water, grease on the rims, and can make the drive highly unsafe. This is why oil adhesion is not so popular anymore.
  • Water-based dressings are an alternative to the oils available in markets and car shops, and it also comes with a UV protectant.
  • Silicone or rubber instantly makes the tires black and patch up the punctures. However, they are used in a specific dosage at every car repair shop, and if you have no prior experience, the wrong dosage can make the tires hard and less flexible.

Thus, it is crucial to be equipped with the proper knowledge and products to make the tires black the right way!

How to make tires black again? A step-by-step guide to newness!

Browsing through the internet about easy-to-use products, you can make the tires black again without much hassle. Here are the steps that you should follow while making your tires black.  

1. First things first, clean up the tire.

Nothing, no product or polish will make the tires black unless the dirt-cakes sitting on the tires are cleaned first. The rim, wheels, grooves, every nook, and cranny of the tire should be cleaned using high-power water sprays (special nozzles).

You can also use a hose to clean up the dirt from the tires, as it ensures a high-pressure water supply, so the dirt, dust, and grime go away instantly.

You can also use dish soap as a tire cleaner to ensure effective cleaning. Many people tend to use a scrub brush to clean between the grooves; however, it is not recommended to damage the tires. Look out for microfiber towels instead.

2. Let the tires dry

Once thoroughly cleaned, let each tire dry so that the tire dressing or blackening agents gets uniformly applied on the tire’s evened-out surface.

**Pro tip: Before you apply the tire blackener, coat the tires with a gel or tire balm after cleaning and drying, it will act as a liner/protection and enhance the durability of the blackening agent. Just make sure that you dry the tire again.**

3. Time for a tire dressing or, as you may call it, a tire blackener

From oils to water-based solutions, you can find many chemicals with different features. However, water-based solutions with UV protectants applied on the tire with brushes or cloth are the top choice as they are safe, easy to use, and keep the tire black for more extended periods.

It is essential to follow all the instructions on the product’s pack, as their overuse can damage the tires. Buy good-quality products and specialized tire blackener brushes because the tires are the fundamental of your car.

4. Wait for the tires to dry again, and see the magic

Please wait for the tires to dry because most of the blackening chemicals show results once they are dry. So be patient, as the results are worth the wait!

Do not fall for the market tactics or cheap products; your tires need the best.

Products you can buy for enhanced shining

Here are a few products that will not only make your tires black but will help them get the desired gloss and shine.

TriNova Tire Shine

TriNova Tire Shine Spray

Check Prices

We earn a commission if you click this link and make a purchase at no additional cost to you.

A water-based tire shine spray that gives long-lasting results with no grease on drying, TriNova Tire Shine is a popular choice amongst car-enthusiasts and detailers.

It comes in a gel-based or spray form. The spray is easier to use. Once the tire shine is applied, use the applicator pad that comes with it to dab it and wipe it away evenly.


  1. High-gloss shine with finesse
  2. Durable and protect the tire against aging
  3. Resilient to dirt and grime

CAR GUYS Tire Shine

CAR GUYS Tire Shine

Check Prices

We earn a commission if you click this link and make a purchase at no additional cost to you.

With a polymer additive, it not only makes the tires shine but can also be used effectively on other car parts such as plastic and vinyl surfaces. Although easy to use with eye-pleasing results, it is not water-resistant and can get easily washed off, killing the satin look.

It comes in a spray form with its applicator pad and instruction guide to ensure a hassle-free process.


  1. Best-rated quality shine
  2. Durable, and has a UV protectant
  3. It can be used on other car parts
  4. It can be applied multiple times without any damage.

Turtle Wax T-10 Black

Turtle Wax T-10 Black Tire Coat

Check Prices

We earn a commission if you click this link and make a purchase at no additional cost to you.

Rainstorms or multiple car washing, this product is resilient to all. It not only makes the tire shiny but cleans away all the dirt and grime. It is available in spray or gel form with microfiber applicator pads or wipes; it is easy to use and cost-effective.


  1. Bonds well to sidewall rubber
  2. Non-greasy
  3. Durable, flexible high-shine coating
  4. Repels dirt and grime

For people with a knack for doing everything from scratch, DIY hacks have been a lifesaver during this pandemic when going out for car detailing or tire blackening is unsafe.

Here are some easy DIY tire shine solutions for your cars!

1. Baby oil:

Homemade baby oil is easy to prepare with zero harmful chemicals and will make your tires look glossy and your car as good as new. You can use it every week.

List of what’s needed:

  • 1 cup of any baby oil
  • 1/2 cup water
  •  A few drops of dish soap
  •  Clean towels or clothes

Cleaning method:

  • Take half a cup of water in a spray bottle
  •  Add in a few drops of dish soap with 1 cup of baby oil
  •  Shake vigorously to mix it well
  •  Spray it on the towel and the tire, clean well

2. Castor oil and alcohol:

Castor oil not only makes your hair shine but your tires too. When combined with alcohol, this DIY shine solution gives an excellent glossy look to the tire.

List of what’s needed:

  • 30 ml dish soap
  • 100 ml castor oil
  •  300 ml rubbing alcohol
  •  2 gallons or 7 liters of water
  •  Clean towels

Cleaning method:

  • Wash the tire with water first and then with alcohol
  •  Clean the tire with 30ml dish soap mixed in lukewarm water
  •  Use the clean towel to apply alcohol uniformly
  •  Lastly, take a new towel and apply castor oil

3.  Lemon Oil:

Who doesn’t know the excellent benefits of lemon oil, but what you do not know is that you can prepare a homemade lemon oil tire shine with a few ingredients. It not only acts as an excellent tire shiner but works as a rubber conditioner and tire wax, too, protecting the tires against aging.

List of what’s needed:

  • 15ml lemon oil
  •  30 ml dish soap
  •  50ml borax
  •  2 gallons of water
  •  A cleaning brush

Cleaning method:

  • Take a bucket and pour all the ingredients into it
  •  Give it a good stir
  •  Apply the mix on the tires
  •  Clean thoroughly with the brush
  •  Dip the tire in the mixture, squeeze the liquid and let it dry

4. Homemade Pledge Furniture Polish:

Furniture polish is not only for your bed set. It can bring back the glossy appearance of the tires of your car, and we are not kidding. If out of stock, or when you do not want to visit the store in this pandemic to avoid human contact, preparing a homemade Pledge furniture polish is a lifesaver – or should I say a car saver?

List of what’s needed:

  • Half a cup olive oil
  •  20 drops of lemon oil or one-fourth of lemon juice
  •  A microfiber cloth

Cleaning method:

  • Take a spray bottle
  •  Put the ingredients in it
  •  Shake well
  •  Spray on the tires
  •  Wipe down the surface with the towel


Can you use WD40 as a tire shine?

Used as an effective cleaning agent, lubricant, and penetrative oil, WD40 can be used on the rubber (silicone) of the tires to make them appear clean, shiny, and glossy. It is safe and easy to use and acts as a lubricant for the tire, increasing its efficiency with smooth running on the roads.

Although people get skeptical about using WD40 as a tire shine, there is nothing to worry about. It can also be used to keep spark plugs at bay from corrosion. wd40 works effectively in removing the hard tar deposits on the rims of the wheels.

Why is it so essential to protect your tires?

Summing it all up, making the tires black not only revives the car’s beauty but it makes its life longer and the driver safe on the roads. Bad tires can be dangerous, as they can lose their grip on the streets while sloppy sideways.

Tires are one of the most noticeable features of your car’s appearance. Your car says a lot about you, so let it reflect your best side.

Now that you have come to an end with us and have equipped your minds with the proper knowledge to roll up your sleeves, tires are waiting for your attention!

Make the tires black again, so next time you take your car on the road, you feel the drive!


Related materials

5 cool and inexpensive Chinese car ideas for autumn

You don't have to go to a car wash or a spare parts store to get your tires back to a deep black color. You can get by with improvised means, and some of them are sure to be found in almost every home.

There are several ways to blacken tires that are safe and do not affect traction. In the absence of special means for restoring color, for example, shoe polish, glycerin, silicone oil, and even laundry soap and household chemicals are used. Each substance has its pros and cons, but it should be remembered that none of them fully possesses the qualities inherent in special solutions: neither long-term effect, nor protective properties, nor ease of use.


Related materials

11 factors that the driver needs to remember in the fall

Blackening tires with shoe polish or other shoe care product is the first thing that comes to mind. At the same time, the processing process itself is no different, only instead of a brush it is better to use a sponge so that splashes of shoe polish do not stain the body. We simply rub the sidewall of the washed and dried tire with shoe polish and let it dry.

To be honest, the result does not look very good, even when using the product with wax: there is neither shine nor color depth. The application process itself is also inconvenient - imagine what it would be like to process four wheels. The downside is that you have to wait for the shoe polish to dry completely before driving. Otherwise, road dust will quickly stick to the treated surface, reducing all the efforts made to nothing. Of course, there are also quick-drying paint creams, but their cost is such that it will still be cheaper to buy a special product for blackening tires.


Due to its consistency, glycerin creates a stunning jet-black shiny tire effect, and the degree of "greatness" can be adjusted by diluting the product with plain water. For one procedure, only one hundred grams of glycerin and the same amount of water are enough. We mix them, taking into account the fact that the less water in the composition, the more "fat" the effect will be. But it’s better not to spare water, otherwise dust will stick to the tires, as in the case of wet shoe polish. The composition is applied with a simple sponge without rubbing. By the way, unpainted black plastic body parts can also be processed with this composition.

The advantage of this method is its low cost and the availability of glycerin in any pharmacy. The disadvantages overlap all the advantages: glycerin quickly ages rubber, causing it to crack. In addition, the composition is very well washed off with water - the very first rain or driving through a puddle will not leave a trace of glycerin. In dry weather, tires will only stay black for a couple of days.

Silicone oil

Related materials

How to sit behind the wheel - check your fit

Blackening tires with silicone oil is not the cheapest way because it is not sold in small containers and you will have to buy an annual supply of funds right away. This method is the simplest, most efficient and less labor-intensive than the others. It is better to use medium viscosity oil, which will also come in handy for treating tires before winter or summer storage - this is the only substance described that somehow protects rubber from cracking, drying out, ultraviolet radiation and moisture.

The effect after treatment with silicone oil is long-lasting and the tires look blacker than new. Silicone oil is also treated with door seals and trunk lids so that they do not freeze.

Laundry soap

Laundry soap is perhaps the cheapest product suitable for blackening tires. It can be applied with a pre-soaped brush, or by dissolving a crumb of soap in water, apply the composition with a sponge. There is no need to rinse off the soap: when it dries, the rubber will acquire a beautiful and deep black tint. Like most artisanal methods, blackening tires with laundry soap has its drawbacks. Rubber because of it, as in the case of glycerin, ages faster and may begin to crack, so we do not recommend this method of blackening.

Other methods

Related materials

Preparing the car for winter: what needs to be done first

Household chemicals are often used in car washes. This is a cheap, effective and harmless method for rubber and its adhesion to an expensive method, which can be offered as a bonus or "gift". It is mainly used for washing glasses, as well as dishes. The first is sprayed onto the sidewall of the tire and rubbed quickly, while the second is applied with a damp sponge. It is not necessary to wash off the compositions.

Also on the forums it is advised to blacken tires with drinks. More often than others, Coca-Cola is mentioned. But because of the sugar in the composition of the cola, it creates a sticky layer, on which dust quickly settles, and is easily washed off in the first puddle.


All of the listed products, of course, are inferior to the special compounds sold in auto chemical departments. Their blackening effect is short-lived and does not look so beautiful. In addition, most of them can harm rubber by affecting its chemical composition and reducing its service life. Nevertheless, the described methods are in demand due to their availability and spontaneity, because most motorists do not need to blacken tires every day.

However, the safest alternatives to professional tire blackeners are silicone and household chemicals. The latter is usually also cheaper.

  • More helpful tips can be found here.


Our new video0003

Dongfeng Captain video test: like a GAZelle, but cheaper

Did you like the article? Subscribe and you will always be in the know!

Driving in Zen


Three ways to blacken tires at home

In this article, we will analyze with you three ways to blacken rubber and why it is needed, as well as how often these methods can be used and how this can be done at home and without much effort. Most often, blackening agents are not very cheap, and the purchase of this drug costs a pretty penny. And in this article, we will tell you how you can save money and keep the color of your car's tires vibrant.

  • Why you need tires
  • How often you can use rubber inks
  • Tire blackening, we study methods
    • Eplamping aging
    • Using gutaline
    • Blackthrise by glycerin
9004 9004 before proceeding to reading this section, it is worth understanding what rubber blackening is. Rubber blackening is the treatment of car tires with a special tool that gives them a jet black color.

When you use a car, the wheels suffer the most. It all depends on rough roads, salts and chemicals and other factors. And it is because of this that the rubber loses its original appearance.

You don't need to spend money on buying new tires to get your old tires back. For this there is a blackening of rubber. This is an effective procedure that gives the tires their original black color. Also, blackening of rubber can be done at home.

In addition to the original black color, these methods will give the rubber protective properties. The tires will have a protective silicone layer. This will protect them from dirt and dust and cracking. Basically, tire blackening is used before a solemn holiday, for example, a wedding.

How often can the blackening of rubber be used?

You can apply tire blackening every day, depending on which method you choose. Sometimes there are costly means of blackening wheels. It is best to do this procedure when the color begins to fade. Be sure to treat tires in this way before seasonal storage. Modern rubber is susceptible to cracking under normal conditions. But the methods that will be discussed later will save your rubber, and give the tires a rich black color.

Tire blackening, learning how to do it

Tire blackener can be used to fix the tires on your car and do it yourself. Blackening of rubber should be carried out after washing the car. And in this section, we will tell you in what three ways you can restore the black color of your tires.

Blackening agent

This method is mainly used in workshops. But you can make it at home Many motorists are wondering what is the best way to blacken the rubber on the car and not harm the tires.

For example, Turtle Wax . This is a black gloss that improves the color of the tires and prevents them from drying out, cracking and discoloration. Tires acquire a permanent color, a protective coating and prevent pollution and dust that settles on the surface of the rubber.

The benefits of this preparation are as follows:

1. Prevents dust and road grime from settling;

2. Water and mud run off the tire surface due to its hydrophobic properties;

3. Spray pack.

The method of application is very simple. A wheel blackening agent is applied to the side surface of the tires and left for 10 minutes until completely dry. You do not need to wipe the tires after this.

Use of shoe polish

This method is used in the army for rubbing the tires of trucks or military vehicles. Gutalin is not the kind of tool that should be blackened with rubber on a car. This product will certainly make tires bright black, but it will dry out the tires and shorten their lifespan.

How to use

Shoe polish is poured into an iron bowl, filled with solvent and heated to a boil. After that, it is applied to the tires with a brush and we wipe our hands with a solvent from the product. The wheels become like new, but this is enough for one trip.

Blackening rubber with glycerin

The next way to blacken rubber is considered a folk method and this is glycerin. This tire ink does not contain dyes like shoe polish.

Learn more