Spread the love
Looking to paint your wheel rims black? You can save bucks by doing it yourself at home. Here’s our step-by-step guide on how to paint your rims black.
If you’re a car enthusiast, you already know how popular black rims are. For the uninitiated, black rims have a huge fan base and are a head-turner. If you’re on the mission to make your car look cool and stylish, then black rims are the way to go. No matter what size your car is, black rims on your vehicle can never go wrong. So, if you’re looking to paint your rims black using DIY techniques, you’ve arrived at the right place. In this post, we’re explaining how to paint your rims black. Keep reading to know more.
Follow our step-by-step guide and learn how to paint your rims black.
For best results, we recommend removing the wheels. That’s because you can end up applying the pain unevenly if you don’t remove the wheels from the vehicle. Use a jack, lug wrench, and jack stand to remove the wheel from the base.
Separate the wheel from the tire. By removing the wheel from the tire, you can avoid spraying paint. If you’re looking to paint only the face of the wheel, then you can leave it as it is.
You need to first clean the wheel before painting them. After removing the wheel, clean it with a high-quality wheel cleaner. First, rinse the wheel with water, then apply the wheel cleaner. Now, use a soft brush scrub and remove the dirt and grime. Finally, rinse it off with water and dry it using a microfiber towel.
After cleaning the wheel, you will now see the scratches and bumps in it. If they are mild, you can skip this step. However, if they are deep, use sandpaper and water to smoothen the surface. Use 300-grit sandpaper and water and sand the entire wheel. Next, use 500-grit paper and repeat the same step.
Once you’re done sanding the wheel, run your finger over it, you should be feeling a smooth surface.
Now spray water over the wheel and dry it with microfiber towels.
Wear a protective glass and gloves to safeguard yourself. Next, choose a dust-free place with ventilation to paint. Place the wheel on the floor or the wall and begin the painting process.
Now tape the outline of the rim. The portion inside the tape is what you’ll be painting. Using plastic wrap, cover the entire wheel. Cut out the center of the plastic – the spot you’ll be painting – using a razor or knife. The others parts are protected from overspray.
Before painting, you need to apply primer to the wheel. You should be applying two or three coats of primer and follow the duration between each coat as per the instructions on the product. The primer will protect your wheel from rusting and make the paint look even across surfaces.
The actual painting process begins now. Shake the paint well and start spraying it on the wheel.
Like the primer, you’ll be applying multiple coats of paint. Spray the paint back and forth at a consistent pace. Don’t leave any gap. You should wait and allow the paint to dry before applying the next coat. Two thin coats followed by a thick coat should get the job done.
Once you’re done painting, check the wheel and allow it to dry. Follow the same steps to paint other wheels.
Read our blogs for information on the best airport parking and hourly parking spots near you and the most affordable insurance for your car.
Do you want matte black rims? Do you want glossy rims? Check out our guide.
If you like the look of abrasive black rims, go ahead and indulge yourself. However, you should be aware of what matte black rims entail to avoid future complications.
What could be worse than a DIY art project that isn’t expensive or intimidating? It takes a few days to finish, but it completely changes the look of the vehicle.
You can get basic black rims at a very low price.
Contents
Your choice should be well ventilated and free of emissions.
It will be a great job if your yard is green. During working hours, do not let pollutants damage the protected area.
You can also choose a parking spot with enough space to work and secure supplies. Avoid over-spraying the adjacent field. When the sky is cloudy, you can work in the store or park safely at home. When painting the tire black, keep the bucket.
Many specialists suggest removing the wheel. This will help with a fresh start. Remove all four wheels. Attempting to paint the wheels of a car will not be competitive.
Clean the wheels thoroughly, including the black, chrome, and painted rims. It is advisable to clean the back of the wheel with a degreaser. Dirt and grime will be removed between cleaning the spokes. Rinse gently with water after cleaning the discoloration.
Before applying a color coating it is necessary to polish the surface well. You have already done the basic cleaning and are ready to tackle the radii.
Scrape first with a wire brush. You can remove all the rust. Do not break it. Use elbow grease and wire scraping for satisfactory performance.
After finishing brushing, sand the wheel with 300 grit and then 500 grit. This will polish the rusty fields. Instead of steel wool, use sandpaper.
After sanding the wheel, let it dry. If it appears to be dry and smoother, smooth it with alcohol or solvent. Rub the wheels until no marks remain.
This is a technical job that must be done before painting the wheels.
Now we need to cover the entire wheel to avoid excess paint. Painter’s tape is the easiest option for protection, but we suggest using newspaper or stacks of index paper instead.
Next, wrap the tape securely around the rim of the tire. Remove the valve stem as well. This is to make it more comfortable and to prevent overspray.
Apply the primer immediately.
What does the primer do? What happens if the primer paint option is used? The primer prepares the rim for color adhesion. Without it, the color would fade quickly.
After cleaning the metal of rust, the paint will be applied smoothly; the primer will help prevent corrosion. Apply the primer after the light coat.
Once the primer is dry, apply matte black to the rim. Keep a safe distance from the can and apply the coating as directed. Do not overfill the can. Some areas may become darker. Gradually paint the colors. For best results, allow each coat to dry before adding another.
The clear coat is applied last. It is used to create a permanent color. It is recommended to apply two coats at the same distance. Helps prevent paint staining and corrosion.
Wheels should be dry for 24 hours before maintenance. After one day, remove tape or hardware. Remove the plug from the valve stem. Rotate the wheels. You can drive for an extended period of time; this is technical instruction.
Spraying is more convenient because it will give the paint a cleaner and more professional look. Brushing tools are available, but if you don’t have the skill and dexterity of a painter, remove them or send them to a specialist. Using a large brush is the fastest way to paint on tires.
A tutorial on How to paint rims black matte will almost certainly help you get the most out of them. It has no negative side effects, so it shouldn’t interfere with safe driving. I’m sure your friends will congratulate you on this beautiful job. Painting the rims professionally not only serves to brighten the bodywork but also to protect the rims from mud and clay. “Shoes make clothes, and they act like car rims,” as the phrase goes.
Hi, I'm the initiator and writer of this blog. Cars were and will be my first love, and my favorite hobby, that's why I decided to start this blog and write about my discoveries and techniques to improve my cars or repair them.
...
Disc diameter: 13 "
13" 28 "
Disc type
Monoblock2x-component 3-component
painting
In 1 color coloring 2 coloring with polishing
Additional service polishing
Painting cost:
RUB 0
The cost is estimated. exact cost check with the manager.
| work | R13-R16 | R17-R18 | R19 | r21-R28 | |
|---|---|---|---|---|---|
| Painting in one color (4 discs) | 10000 | 12000 | 13000 | 14000 | 16000 |
| Painting in two colors (4 discs) | 18000 | 19000 | 20000 | 22000 | 25000 |
| Sanding painting (4 discs) | 18000 | 19000 | 20000 | 22000 | 25000 |
| Shelf polishing (4 discs + varnish) | 12000 | 12000 | 12000 | 12000 | 12000 |
Black is a real classic! It goes well with other colors and never loses its relevance.
It is not surprising that such a service as painting discs in gloss black is at the peak of popularity today! You can order it from Kolorika.
When contacting us, be prepared for the fact that there are three options for painting wheels in black: matte, chrome and gloss. If it is difficult for you to make a choice, we will help you do it based on the appearance of the car. You can be sure that this choice will not disappoint you!
The rims are painted in matt black using the “powder” technology. It allows you to get a high-quality reliable coating that is immune to moisture. It will serve faithfully for more than one year, while maintaining excellent appearance and functionality.
Wheels are painted in black chrome using high quality imported paints. The process involves modern equipment, all work is carried out by experienced professionals. You can be absolutely sure that the results will not disappoint you!
You can find out more on our website or by calling us by phone: +7 (499) 653-50-02!
Chrome wheels for cars Here you can read reviews about our work.
our company open to clients. Reputation is the best marketing Therefore, we carefully monitor the quality of the services provided.
If you have any suggestions or complaints, you can contact our manager by mail or phone number indicated on the site.
Each situation is considered individually.
Kolorika on the map of Moscow — Yandex.Maps
Contacts
Go to contacts+7 (499) 653-50-02
Email. mail [email protected]
Wheel repair and painting
Moscow, st. Vereiskaya, 29s35g. Moscow, Novy Arbat, 32car detailing
Moscow, Novy Arbat, 32To show on the map
Content:
A car with shiny or unusually colored rims is always a delight to the eye.
However, these graceful design elements require relentless attention. And even regular thorough cleaning will not save discs from darkening and tarnishing after some time. Why do car owners have to think about restoring discs, is it possible to carry out this procedure on their own and how to paint it correctly - we will consider these and other questions in our material.
If you use your car frequently, it's almost impossible to keep your rims looking their best for long. Indeed, in the process of driving, they are attacked by small gravel, dirt or chemicals that are sprinkled on roads in winter. In addition, temperature changes affect the coating. And inaccurate parking, as a result of which you seem to have “ground in” the discs a little, can lead to serious damage to their surface. As a result, scratches and chips appear on them, which cause the growth of foci of corrosion. As a result, after a certain time you have a problem - dull discs with scratches and traces of rust.
However, knowing how to paint rims, you can handle it yourself, without the involvement of expensive specialists.
The first step is to determine the type of your disks. After all, the question of how to paint stamped wheels is easier to solve: it is not necessary to cover them with primer before painting. Cast ones require preliminary application of a special primer. Otherwise, the coloring technology does not differ.
Before proceeding with the restoration, you need to prepare the necessary materials:
Now let's figure out how to paint rims with your own hands:
1.
Thoroughly clean and clean the surface of the discs.
First of all, we need to get rid of pollution. To do this, carefully wash the discs with a special cleaning agent using a brush. Then we remove the remnants of the old paintwork from the disks, cleaning them with sandpaper. We use grit with numbers from 200 to 600. From time to time we wash the surface with water. Sanding will remove all irregularities from the discs, as well as traces of corrosion.
2. Degrease the surface.
Before applying the primer, the discs must be degreased. After all, on a clean and fat-free surface, the paint will last much longer. This will allow us to qualitatively paint the wheels without removing the rubber.
3. We cover the tire.
Now, using masking paper or film, as well as masking tape, carefully cover the tire so that paint does not get on it.
4. Apply primer.
Priming is one of the most important stages of restoration work, so it is important to choose a high-quality product for it.
Motip Standard Acrylic Primer has excellent adhesion and provides an ideal base for further paint application. Due to the presence of anti-corrosion components, this composition will protect the surface from rust. The primer should be applied from the inside of the disc, spraying the composition from a distance of about 25 cm and shaking the can from time to time. We need to apply 2-3 layers of primer, giving each of them time to dry. Now we need to figure out how to paint the rims with our own hands using paint in an aerosol can.
5. Paint car rims.
For this purpose, we use Motip Disk Enamel. It is characterized by excellent adhesion and hiding power, and also contains anti-corrosion components. After application, a durable smooth coating is formed, resistant to aggressive external factors. We shake the can vigorously for two minutes, after which we spray the paint from a distance of 25 cm. The main thing here is not to overdo it - it is better to apply several thin layers instead of one thick one.
Motip disc enamel has a short drying time, so each new coat can be applied after 2-3 minutes!
6. Lacquer coating.
The final step will be the varnishing of the painted surface - we use Motip Clear Acrylic Varnish. It will enhance the protective properties of the coating, as well as give the discs a long-awaited shining shine! We apply several layers of the composition from a distance of about 25-30 cm, waiting for each of them to dry. After the completion of the restoration work, we admire the result!
We've learned how to paint your own wheel rims, save money, and get them to shine!
Most often the rims are painted steel color, or you can paint the rims black. However, the scope for your imagination is limitless! Motip rim enamel allows you to choose any shade - from white to gold or silver.
When painting alloy wheels, it is not necessary to be limited to only one color. Combine contrasting shades for spectacular combinations!
Contrasting edging looks beautiful on stamped disks. To do this, first you need to apply the first shade of paint and let it dry. Then cover the middle with masking paper and apply the second color. Wait for it to dry, then remove the paper and enjoy the result!
Light green or purple wheels look great against the background of a silver body! In this case, you can choose both a glossy and matte shade.
You can get creative and paint the rims on the wheels of a blue car yellow, light green or even pink.
