How to polish aluminum atv rims


Polishing Stock Wheels?? [Archive] - ATV Riders Forum

ATV Riders Forum > Sport ATV Model Information > Honda TRX 400EX & 400X ATV Info > Polishing Stock Wheels??


PDA

View Full Version : Polishing Stock Wheels??



PaRedneckRiders

08-09-2010, 01:03 PM

My stock wheels dont really look the greatest as of now, is there a way i could polish them and make them shiny again

ill get some pics of them and some pics of the polish i have but it wont work on my wheels it just sorta cleans them and not polishes them

This stuff worked AMAZING on my cr250 frame but i dont think its what i need to do my wheels

Since im looking at a polished axle a-arms and swingarm i might as well do my wheels just not sure how to do them

Give me a couple minutes and ill go take some pics of my wheels and tell me what u think i can do


PaRedneckRiders

08-09-2010, 01:16 PM

heres the rears and ya i would wash them before i polish them but i would like to get them to an almost mirror finish if possible


PaRedneckRiders

08-09-2010, 01:17 PM

rears again


PaRedneckRiders

08-09-2010, 01:18 PM

fronts
I know im missing lug nuts i dont have them on right now because i put 2 on each side, wasnt riding it and have to take them off again anyway


PaRedneckRiders

08-09-2010, 01:19 PM

polish i used on my cr250 frame but i just think i need something a little bigger or stronger to polish these


HondaRacing83

08-09-2010, 01:23 PM

ahhh i do this all the time its super easy!theres 2 different ways you can do it. WAY #1-When your washing your 400ex(powerwasher)put degreaser on your rims(which is basically kerosene with some kind of addative or sullative)my dad gets it free from work to but spray it on your rims and wait like 5-10minutes and powerwash it off and they will be very nice and shiny(you can also use degreaser on your plastic,bumper,nerfs,anything,etc.)and then there is WAY#2-If you cant use degreaser this works just as well if not better.After you just simply powerwash it off,put Aromor All Wheel Cleaner on them,then wipe it off and it will also be very nice and shiny.(The wheel cleaner will also work on your axle.i.e. my axle was very dirty no matter how much i washed and then i put wheel cleaner on it and it and scrubbed and it made it just as polished as my bumper/nerfs)i hope this helps you out!


PaRedneckRiders

08-09-2010, 01:26 PM

i might try the degreaser ive got like 5gal of the stuff sitting in the garage


CJM

08-09-2010, 01:27 PM

Turtlewax chrome polish, it will remove and shine quite well.


HondaRacing83

08-09-2010, 01:35 PM

Originally posted by PaRedneckRiders
i might try the degreaser ive got like 5gal of the stuff sitting in the garage ahlright cool,it works quite well,and like i said if you spray some on your plastic and other things it will shine it up quite well also


PaRedneckRiders

08-09-2010, 01:37 PM

Originally posted by HondaRacing83
ahlright cool,it works quite well,and like i said if you spray some on your plastic and other things it will shine it up quite well also
Well i use pledge floor finish with future shine on my plastics lol

Seems to work pretty well with the silver maier and QT CF hood


HondaRacing83

08-09-2010, 01:44 PM

ohh ok then lol


4reeds

08-09-2010, 07:29 PM

stuff called neverdull works awsome.I hadn't polished anything on my quad since 2004.This stuff takes off rust,baked on mud,clay,you name it. Just tear off some of the fabric and rub and everything comes off.Then wipe down with a microfiber cloth and its polishes.


NacsMXer

08-09-2010, 07:30 PM

I never had much luck trying to polish stock wheels...I think they are anodized clear or something. The rag never turned black much when I tried. Might have to sand first with high grit sandpaper to knock down the coating first.


Ian400ex

08-09-2010, 07:33 PM

Lol, I have those same stem caps :p

and I always use my pressure washer then a rag on my rims and they tend to look nice after that (but these are 08 rims).


Napalm Nate

08-10-2010, 06:02 AM

to get a mirror like finish on stock wheels you will have to sand the brushed coating off def a ton of work. go for it if you have the patience if not just buy some .190s

these are my stock wheels


PaRedneckRiders

08-10-2010, 07:57 AM

Originally posted by Napalm Nate
to get a mirror like finish on stock wheels you will have to sand the brushed coating off def a ton of work. go for it if you have the patience if not just buy some .190s

these are my stock wheels

Man those look pretty good but i think im not gona waste the time im prob gona have to cut back on the mods i want because my buddu wants me to buy his 03 crf450 for 1300 cash today so he can go put a down payment on a new one cause thats all the dealer will give him
So have to wait till i can flip that deal and then go back to putting money in the EX


MidnightBlade

08-10-2010, 12:27 PM

i can guarentee you mothers mag and aluminum polish, my exhaust looked white before and i smeared some on rubbed it around, whiped it off and it honestly looked like it was chromed. id do the nevrdull then the mothers as the finishing touch. oh and it gets rid of the factory clearcoat too


PaRedneckRiders

08-10-2010, 12:58 PM

Originally posted by MidnightBlade
i can guarentee you mothers mag and aluminum polish, my exhaust looked white before and i smeared some on rubbed it around, whiped it off and it honestly looked like it was chromed. id do the nevrdull then the mothers as the finishing touch. oh and it gets rid of the factory clearcoat too

Ive used some of the mothers polish before but i got all that x-treem stuff i have for free it 12$ a container and i got about a dozen for free lol


HondaRacing83

08-10-2010, 03:59 PM

so have you tried anything yet?and sayy how far is ARMAGH from Meadville?


PaRedneckRiders

08-10-2010, 07:29 PM

Originally posted by HondaRacing83
so have you tried anything yet?and sayy how far is ARMAGH from Meadville?
Its almost 4 hours your on the south eastern part of PA on on the south western
But ive got some buddys of that way (meadville and Lancaster)


HondaRacing83

08-10-2010, 08:29 PM

Originally posted by PaRedneckRiders
Its almost 4 hours your on the south eastern part of PA on on the south western
But ive got some buddys of that way (meadville and Lancaster) uhhh ur wrong im in north western,PA (below erie)


MidnightBlade

08-10-2010, 09:45 PM

how far from johnstown, look it up on bing


HondaRacing83

08-10-2010, 10:20 PM

im to lazy to right now


PaRedneckRiders

08-11-2010, 08:23 AM

Originally posted by HondaRacing83
im to lazy to right now
Oh sry i thought u were from Lancaster county, but your in crawford county so im like 2 and a half hours away


MidnightBlade

08-11-2010, 08:24 AM

im in cambria so you are like 2 hrs away


sc400ex_rider

08-11-2010, 09:07 AM

yes the stock rims are clear anodized. an easy way to remove it is to mix a solution of 1 tsp of lye (drain cleaner) to a gallon of water and immerse the item. let it sit for 5-10 min and lightly scrub with a scotch brite pad. use gloves cause its caustic and will burn your hands. the wheels are big so you might need a med. size tub and 2-3 gals of water. you can do 1 side at a time. then just polish with mothers or flitz or simchrome. you can use this to strip any faded anno to spruce up old parts. great for cars bikes R/C stuff.


HondaRacing83

08-11-2010, 11:02 AM

Originally posted by PaRedneckRiders
Oh sry i thought u were from Lancaster county, but your in crawford county so im like 2 and a half hours away me,you,and midnightblade should put a ride together,maybe we could all go to a harescramble or poker run,i here theres some nice poker runs in houtzdale,maybe a couple other riders that want to come?


MidnightBlade

08-12-2010, 07:31 AM

ah probably not, i already beat the balls of my quad in 4-5 other 40-80 mile rides. and id probably kill my self in a harescramble... but maybe. oh and i cant drive yet :confused: , so that might pose a problem


HondaRacing83

08-12-2010, 10:20 AM

Originally posted by MidnightBlade
ah probably not, i already beat the balls of my quad in 4-5 other 40-80 mile rides. and id probably kill my self in a harescramble... but maybe. oh and i cant drive yet :confused: , so that might pose a problem i cant either!im sure my dad would drive me,im only 12 lol,dnt underestimate me lol i ride the wheels off my 400ex


MidnightBlade

08-12-2010, 10:35 AM

my dad works and my mom can usually take me but she wouldnt want to make 2 hour and a half trips there and back, my cuz should be able to bring me and him and his bro might ride too.


HondaRacing83

08-12-2010, 05:49 PM

cool man!theres some poker runs in geneva, ever heard of it?


MidnightBlade

08-12-2010, 09:22 PM

nope


HondaRacing83

08-13-2010, 11:52 AM

ah ok then


Powered by vBulletin® Version 4. 2.1 Copyright © 2023 vBulletin Solutions, Inc. All rights reserved.

Tip: Make aluminum rims shine again quickly!

tuning blog 10 July 2021 Tips, products, information & Co.

Shiny alloy wheels are for car lovers Got to. So that you no longer have to deal with dirt and burnt-in brake dust as often in the future, we have put together a few household remedies for you to clean aluminum rims. Brilliantly shiny aluminum puts your car in a better light. But so that the alloy wheels are always clean and shiny, you have to invest some time and update them regularly Dirt and brake dust to free. Especially Brake dust, which tends to stick to the rims due to the heat when braking, is usually difficult to remove. Thanks to a few home remedies, you can get this problem under control much better. In this article we will show you which home remedies they are and how you should use them:

In principle, the rims can of course also be fitted with a conventional one wheel cleaner to be cleaned. To do this, you first have to attach the rims to a Pressure Washer hose down thoroughly or with a wet one sponge clean. You can then spray the rim cleaner on and let it work for a few minutes. Finally, run a brush or a cotton cloth over the aluminum rims and you're done. Before wintering, the rims should also be coated with a special rim sealant be sprayed. The following articles deal with the topics just mentioned:

  • Tip: rim cleaner - this is how it is used correctly!
  • All tips for washing your car with a pressure washer!
  • Tip: What to watch out for when sealing the rim!

Which rim cleaner is the right one?

Rim cleaners with a high acid content are bad for aluminum rims. On the other hand, they are more suitable All Purpose cleaner from specialist retailers, which are usually sufficient to remove dirt from the rims. However, it is crucial to use the right product for the right rims. Avoid cleaning agents acetone, as these attack the paint.

Insider tip: clean aluminum rims with oven spray!

Instead of using a special cleaner, rims can also be polished to a shine using simple household remedies. Cleaning is quick and easy if you have one Oven spray use. As soon as the coarsest dirt has been removed from the rims, you can dry the rims and then apply the spray. The oven cleaner should be used for 15 to 30 minutes act. After that, the rims only have to be hosed down with a hose or wiped off with a wet sponge. The following articles deal with the topics just mentioned:

  • Which household remedies you can use to clean aluminum rims!

Clean the rims with toothpaste!

Surprisingly, you can with Toothpaste not only clean your teeth, but also the rims of your car. But the toothpaste is allowed no friction particles included if you also want to use them to clean aluminum rims. To clean the rims, simply rub the toothpaste over the rims with a cloth. You will see the dirt come off quickly and mix with the toothpaste. During cleaning, it is best to dip the sponge in clean water and squeeze it out. The sponge is allowed be neither too wet nor too dry. After thorough cleaning, simply rinse the rims with clean water. The following articles deal with the topics just mentioned:

  • Simply clean dull headlights yourself?
  • Fight light scratches in the vehicle paintwork with home remedies!
  • Which household remedies you can use to clean aluminum rims!

more tips and tricks for cleaning aluminum rims:

  • use powerful cleaners like oven spray
  • apply a protective sealer after cleaning
  • choose the right cleaner
    – Rim cleaner to remove dust and dirt
    – Rim cleaning spray is usually sufficient (for the care of aluminum rims, the can should be enough for three to four cleanings)
  • Tip: applying conventional rim cleaners can damage the rim
  • use oven spray for stubborn grease and stains (oven cleaner)
    – Apply spray
    – Dirt dissolves in a few minutes
    – Oven cleaners are available in all supermarkets and drugstores for a few euros
  • Vinegar and lemon juice as cleaning options
    – Put distilled water in a spray bottle and add white vinegar or lemon juice
    – spray the mixture onto the rims
  • Tip: remove particularly dirty rims and soak with household cleaner for 10 to 20 minutes
  • Use cleaners effectively
    – Pre-wash the wheel
    – at best with a hose and high-pressure attachment or adjustable nozzle
    – Spray the wheel with cleaning product
    – Remove wheel hubs with plastic covers beforehand
    – Allow the cleaning agent to take effect for one to two minutes
    – Spray all wheels in one go
    – scrub and rinse them off one at a time
    – clean with a soft-bristled brush (in small circles)
    - alternatively clean with a rim brush or rim brush (alternatively old toothbrush)
    – Clean the brush in a bucket of warm water every few minutes
    – Rinse the wheels thoroughly
    – Wipe the wheels dry with a microfiber cloth (from top to bottom)
  • protect clean rims with a seal
    – use sealing products for aluminum rims
    – the product must be demonstrably suitable for aluminum rims
    – Rim seals are available as a spray and as a wax
  • Tip: Use high gloss finish
    – Apply sealing to the rim surface with a car polishing pad
    – for a spray seal, hold the can about 15 centimeters away and spray evenly
    – use a soft car sponge or microfiber cloth to help (if no polishing pad is available)
    – Allow the sealing compound to harden for 30 minutes
    – always work outdoors or in an open garage
    – Polish the rims with a microfiber cloth (small circular movements over the surfaces)
  • Clean aluminum rims every week or two (or as often as possible).
  • do not use brushes with hard bristles or steel wool

Of course, that wasn't the end of it!

tuningblog has countless other articles on the subject of car and auto tuning in stock. Do you want to see them all? Just click HERE and look around. In part, we would like to provide you with news but also off the tuning. In our category Tips, products, information & Co We have reviews of car or accessories manufacturers, new ones Tuning Wiki Terms or one or the other Leak veröffentlicht. Following an excerpt of the last articles:

"Tuningblog.eu" - we keep you up to date on the subject of car tuning and car styling with our tuning magazine and we present you the latest tuned vehicles from all over the world every day. It's best to subscribe to ours Feed and will automatically be informed as soon as there is something new about this post, and of course also to all other contributions.

Polishing of aluminum cast car wheels Kyiv and region

Tel: (063) 041 06 04 Novoststannovskaya, 1-in

Car service

Motorcycle service

ATV service

Bicycle service

Service service

Universal services

Useful information

Each car owner strives to ensure that his car retains a beautiful appearance and looks like new for as long as possible. Over time, even with the most careful attitude, scratches or scuffs inevitably appear on car rims, the wheels look sloppy. You can solve this problem by resorting to polishing car rims.

In addition to the fact that polishing gives the discs in use the effect of novelty, it also helps to protect them from environmental influences and aggressive substances. As a result, polishing prolongs the life of discs, improving their external qualities.

Wanting to save money, many people try to polish their car wheels themselves, but in fact it is better not to do this. Discs should not be treated with gasoline or thinner, and contactless washing should not be used - all this degrades the surface properties of the disc.

The professional polishing process is carried out using various chemicals. If the disc is slightly scratched, then by polishing it, you can easily give it the appearance of a new one. For polishing use:

  1. Polishing pastes;
  2. Mixed grit sandpaper;
  3. Sanding tool equipped with attachments and attachments.

If the scratches on the discs are significant, argon-arc welding is additionally used.

Our company offers mirror polished discs. Such car care is available to all car owners both in Kyiv and in Ukraine, the price of our services is very attractive. For high-quality polishing, our craftsmen use professional polishing machines equipped with felt and special pastes. During polishing, the wheel disk is also treated with dirt-repellent compounds. It is this approach to disk maintenance that is favored by disk manufacturers.

The technically most difficult stage is the processing of the disc sides and their flanges. Our masters successfully cope with this, while eliminating aluminum deposits, chips, scratches. Polishing gives the rim its original appearance.

Residents of the city of Kyiv and all comers, our company provides high-quality services for polishing cast and aluminum wheels is not expensive. Excellent mirror polishing is available to every car owner thanks to the work of our specialists, the availability of special equipment in the company and the right choice of the necessary processing technology. We do the work quickly and efficiently!

For car owners who value their cars, we offer reasonable prices and an indispensable polishing guarantee. Our masters will do the job perfectly in a short time. Regular customers have discounts in our company.

How to polish aluminum car wheels at home | Lifestyle

No matter how much dirt there is on the wheels of your car, you can make them shine again. To perfectly polish the wheels, you need to follow a few simple steps. To do this, you do not have to look for special equipment or buy expensive funds. In this article, you will learn how to update the look of your wheels in less than an hour.

Wheel cleaning

This is the first and obligatory stage, it is also preparatory. If you have the opportunity to do this with a pressure washer, use it. The stronger the water flow, the better the cleaning will be. If you do not have such a device, a regular hose and a spray nozzle will do.

Rinse the wheels and adjacent areas, treat with water and the inside of the spokes of the aluminum wheel. It is important to clean the dirt from the very surface of the rubber tire and around the lock nuts.

Aluminum cleaner

Spray the wheel surface with cleaner. Ideally, special substances are used that are designed to act on aluminum. Among them, it is worth noting Bauset No. 60, Moreman, Wurth, but, in principle, any non-acid aluminum wheel cleaner will do. It should be sprayed onto the surface of the wheels, spokes and lug nuts, or thoroughly lubricated with a sponge. All work must be done with gloves!

But if you are not ready to spend money on buying a cleaner, you can create an analogue of such a product yourself at home by mixing lemon juice and soda. In case of heavy pollution, abrasive material, which in this case is soda, cannot be dispensed with. Even ordinary salt will help remove old plaque on the aluminum surface.

Toothbrush

Once you've prepared your cleaning solution, use a soft bristle brush (you can use an old toothbrush) dampened with water and start cleaning the surface of the wheel, inside the spokes and around the nuts. Due to the length and small head with a toothbrush, you can reach even hard-to-reach places. If the wheel starts to dry out, add more water to the cleaner. Otherwise, you risk scratching the surface.

Wheel bolt wells do not need to be cleaned with soft brushes. On the contrary, here it is better to use an all-purpose cleaner and stiffer bristles. Wheel wells always collect plaque and dirt, so it's best to use a hard-bristled brush with a long handle that will penetrate deep into the hole.

After brushing the rim, rinse thoroughly and wipe with a clean cloth to remove any remaining dust. Now that you've removed the dirt and buildup, use the hose to rinse out the whole wheel. Direct water onto the spokes and into the holes for the lug nuts. Let the wheel sit for a few minutes. After it dries, use a clean, lint-free cloth to remove any remaining dirt particles.

Sanding

This step can only be skipped if there is no damage to the discs and you just want to restore their shine. You can use any of the grinding methods. The most time-consuming, little-used and insufficiently effective grinding is considered to be manual.

If you have a power tool (an ordinary drill, hammer drill, grinder will come in handy), on which you can attach a rotating nozzle, it will save time and make life easier. Your task is to make the sanding disc rotate by applying slight pressure to the surface.

Process description, consumables

Begin grinding with a coarse abrasive, the choice of which depends on the type of defect, and then continue with fine-grained tools. Keep in mind that during the grinding process a powder is formed - it must be removed from the surface to avoid new damage. Carry out the work at low speeds, without excessive pressure, evaluate the intermediate results.

Flat surfaces should be sanded with flat sanding sheets, and various recesses, including wheel wells, should be sanded with fine abrasives.

Aluminum polishing

Today you can buy anything in the market for motorists. Polish is no exception. However, some car owners prefer to save money and use home-made compounds. You do not need to do this, because professional polishing products have a number of undeniable advantages:

  • they do not contain ammonia, so they are gentle on aluminum surfaces;
  • fill scratches and other minor damage on the surface of the rim;
  • restore car hubcaps and spokes to their original shine;
  • contribute to the formation of a layer that protects against oxidation.

Polishing should be started according to the same principle as grinding: first go through the surface with a coarse polish, and then with a homogeneous paste. The most popular tool is GOI paste, which can be bought at almost any specialized store for motorists. If diamond paste will be used as a polishing agent, buy two types of this substance in advance.

Wipe the surface thoroughly with microfibre before starting the initial polishing. The main thing is to avoid the appearance of black stripes and overheating of the surface - in this case, you will have to remove the entire polishing mass and do the manipulation again. Polishing wheels with aluminum rims requires skill and care.

Polishing tools

In principle, the set of polishing tools is no different from those used in the grinding phase. The difference lies in the nozzles: you need to polish with softer ones. When using a coarse-grained polish, take a hard polishing sheet, and for a fine-grained polish, use a softer one.

Experts recommend felt nozzles, thanks to which the polish stays on the surface for a long time, or felt nozzles. Hard-to-reach places can be polished only with rag stitched circles.

Finishing

After polishing, the disc is thoroughly washed and wiped with a rag. To keep the mirror surface of the disc fresh for a long time, it is recommended to apply additional protective layers of varnish or wax to the surface. If you neglect this step, you will have to wash the discs more often and polish them.

Waxing

Since this method is the least expensive and quite easy, it should be given more attention.


Learn more