How to remove spare tire ram 1500


Where to Find a Dodge Ram 1500 Spare Tire

The Dodge Ram 1500 comes equipped with a spare tire located under the truck bed. You’ll need a wheel wrench and a jack extension tube to remove the tire from its mount.  Both tools are stored under the front passenger seat. 

The

Dodge Ram 1500

is known for being a luxury half-ton truck, and that’s because it combines performance (like sophisticated suspension) with stylish interior features (like premium leather surfaces). Those looking to purchase a new Dodge Ram 1500 can expect to pay around $37,700 for the base trim level, the Tradesmen. 

Another perk of the Dodge Ram 1500 is that it includes a spare tire, meaning you won’t have to rely on a tire repair kit to

fix a flat

. For more information on the 1500’s spare tire, including tips on how to remove and install it, reference this handy guide made by

car insurance

comparison super app

Jerry

.

Are you overpaying for car insurance?
Compare and find out in 45 seconds.

ZIP Code

ZIP Code

Find Savings!

No long forms. No spam calls. Free Quotes.

4.7/5 App Store Rating, 8,100+ Reviews
Trusted by 1.5+ Million Customers.

Is there a spare in a Dodge Ram 1500?

Yes, the Dodge Ram 1500 comes with a spare tire located under the truck bed. You’ll need a wheel wrench and a jack extension tube to remove the tire from the bed. 

The Dodge Ram 1500 spare tire isn’t a full-size tire. A full-size tire is too wide to fit under the vehicle. What you will find is a smaller version of the 1500’s other four wheels, which can safely get you to a mechanic if you run into any troubles on the road. 

To access the spare tire, follow the simple steps below: 

Note that the winch mechanism on your Dodge Ram 1500 is designed to work with the jack extension tube only. Using another tool, like an air wrench, will damage the winch mechanism. 

If you don’t feel comfortable swapping out a flat tire with a spare, call

roadside assistance

—they’ll be able to get you back on the road in no time. 

Once your spare tire is properly installed, you’ll want to drive to an auto shop as soon as possible. Driving on a spare can damage your truck, including essential components like the transmission.  

How to use the spare tire on a Dodge Ram 1500

Flat tires happen, and should you get one while driving your Dodge Ram 1500, the best thing to do is remain calm and safely steer your truck to the side of the road

Once you are as far away from oncoming traffic as possible, place your truck in park and engage the emergency parking brake. Next, turn off your engine and turn on your hazard lights

Remove the spare tire by using your wheel wrench and jack extension tube. The spare tire is located under your truck bed and the tools are located under the front passenger seat.

Jack the car up, remove the flat tire, and install the spare tire onto your truck’s axle. Make sure to tighten the spare tire properly. This will ensure that the tire is locked into place. 

Drive to a mechanic immediately. While spare tires are meant to function like regular tires, they can’t handle traveling long distances or going over certain speeds. 

How to save money on car insurance

A flat tire isn’t just an annoying inconvenience—it can lead to some major repair expenses. A single tire replacement could run you $100 or more, and if you roll up to the mechanic to discover that your rear tire blew because all four are dangerously worn, you could be looking at a hefty repair bill.  

Fortunately, there’s an easy way to save money on car-related expenses. All you need to do is download the

Jerry

app and shop for a new low rate on

car insurance

.  

As a licensed broker and the #1 rated insurance app, Jerry partners with 50+ top companies to find you the lowest rates on the insurance you need. 

Sign-up takes about 45 seconds, and getting your rate locked in is almost as quick! And the savings average out to over $800 a year. That’s enough to buy a full set of brand-new tires for your Dodge Ram 1500, with money to spare! 

“I was looking for a liability insurance plan for my truck until I can afford more coverage.

Jerry

made it simple to shop around for the best deal for me. Thank you!” —Jake L.

RECOMMENDED

Compare auto insurance policies

No spam or unwanted phone calls · No long forms · No fees, ever

ZIP Code

ZIP Code

Find insurance savings (100% Free)

FAQs

How to Get a Spare Tire Down Without the Tool

Whether you’re going on a road trip or making a quick stop at the community center, it’s crucial that your car has a functional spare tire at all times.

It’s equally important that you’re able to get the tire down from under the vehicle when you need it. Some cars come with specialized tools to lower the spare tire and quickly make the change.

However, if the tool is unavailable for some reason, you can still bring down the tire and be back on the road in no time. Let’s take a look at how to get a spare tire down without the tool.

Removing a spare tire without the factory tool is easy when you follow these steps:

  1. Get under the truck.
  2. Pull off the guide tube.
  3. Pull out the key with pliers.
  4. Insert crank into the new hole.
  5. Turn the crank counterclockwise to lower the tire.

How to Remove Spare Tire From Ford Trucks Without the Tool

Removing a spare tire without a tool might appear daunting at first. However, with the right equipment and process, it’s not too difficult a task.

There are two methods to lowering a spare tire on a Ford truck. Each method uses different tools. As such, your choice will depend on the equipment you have to hand.

Method One

This method involves pulling out the key from the spare tire drop assembly and using stock spare tire tools to lower the tire.

To make up for the lack of the factory key, you will need some standard tools like joint pliers, small pieces of wood and an optional helping hand.

After you’ve collected the tools, follow the steps below to remove the spare tire.

Step #1: Get Under the Truck

As you already know, the tire hangs from the truck’s underside toward the vehicle’s rear. As such, you will need to go under to gain access.

Before you get under the truck, remember that safety comes first. Therefore, ensure that you park the vehicle properly, on a surface that’s as flat as possible, with all brakes engaged. These precautions are to prevent the vehicle from moving while you work under it.

Step #2: Locate and Pull off the Guide Tube

Locate the guide tube under the vehicle. This is a long, black, plastic pipe near the tire. Twist the tube back and forth while pulling it in the direction of the vehicle’s rear to reveal the drop mechanism for the spare tire.

Step #3: Put a Wedge Between the Tire and the Vehicle

Still under the truck, move to the passenger side and pull down the tire on this side, putting the wood in the gap between the top of the tire and the truck bed frame.

At this point, you may need that optional helping hand to put in the wood while you hold the tire down.

The reason for putting in the wood is to give you easy access to the drop mechanism without having to move the tire away from the truck bed continually.

Step #4: Use Pliers to Pull off the Key

Put your hand through the space created by the wood and feel for the key to the spare tire drop mechanism. The key roughly resembles a wheel lug nut, and when you find it, pull it out using the jack or working pliers.

Sometimes, just pulling the key may not be enough, and you may need to wriggle the pliers as you pull.

Step #5: Lower the Tire to the Ground

With the key out, the hole left behind is almost identical to the jack crank. Thus you can use the stock tire tools to lower and remove the spare tire. Insert the jack crank into the hole and turn counterclockwise to lower the tire.

Method Two

The second method differs considerably from the first. Accordingly, you need a different set of tools, including:

  • 14mm socket.
  • Hammer.
  • Extender.
  • Socket wrench.
  • Flathead screwdriver.

With the tools above, you can bring down the spare tire by following the steps below.

Step #1: Fix the Socket to the Extender

Attach the 14mm socket to the extender. You don’t need to use a high-quality socket, as any low-end one will do. It’s also best to use an extender long enough to reach from the bumper to the spare tire. Aim for an extender that’s around 60–70cm long.

Step #2: Pass the Socket Through the Back Bumper

Insert the socket into the hole located on the left (or right, in some trucks) of the license plate. The hole leads directly to the key.

Step #3: Hit the Extender a Few Times With the Hammer

Use a hammer to strike the extender when you feel the socket touching the key. Hitting the extender pushes the socket over the key, providing a better grip.

Four to five blows from the hammer should be enough. Additionally, do not apply too much force to the hammer to prevent damage to the drop assembly. You don’t necessarily have to use a hammer; any object large and tough enough can serve.

Step #4: Turn the Socket Counterclockwise to Lower the Tire

With the socket firmly in place, use a wrench to turn the extender counterclockwise. The drop assembly key is similar to the one used on wheel lug nuts. Thus, it will turn as the socket turns.

It may be hard to turn the wrench at first, but it becomes easier as you continue turning, and the tire gets closer to the ground.

Step #5: Remove the Key From the Socket

By the time the tire hits the ground, the key will be loose and you can remove it. Withdraw the extender from the hole, and use a flathead screwdriver to pry the nut out of the socket.

Step #6: Detach the Tire From the Hoist

While the tire is now on the ground, you can’t use it until you detach it from the hoist. To disconnect the tire, reach into the large opening in the middle of the wheel. Next, locate the metal flange connected to the cable and turn it from a horizontal to a vertical position, pulling it out of the rim vertically.

Finally, the hole left behind by the key can fit a jack crank. Put the crank through the opening near the license plate till it gets to the hole vacated by the key. Turn the crank clockwise to raise the hoist back up

How to Remove Spare Tire From Chevrolet Truck Without Tool

While Chevys store spare tires under the truck bed like other trucks, the removal process differs. So, if you’re wondering how to lower spare tire on Silverado without tool, follow the steps below.

You will need a couple of tools, including an ignition key and a jack kit to make a chevy spare tire removal tool.

Step #1: Locate the Spare Tire Access Hole

Like other trucks, the access hole is on the rear license plate’s right side and covered with a rectangular shaped plastic.

Newer models may have a lock over the hole as a security measure. In such cases, use the ignition key to remove the lock assembly covering the hole.

Step #2: Assemble the Extension Rod

Open the jack kit and select the rod with the broader end and flanges on all sides. This rod is the “female” rod and the one you’ll insert into the now open keyhole.

Get another rod from the tool kit, and attach it to the end of the female rod to make it long enough to reach the spare tire from the bumper. Ensure that the press locks enter properly to prevent the rods from disconnecting while you’re turning it.

Step #3: Insert the Rod into the Hole

Insert the composite rod into the spare tire hole. Press and turn the rod simultaneously until the end locks into the cable crank.

Step #4: Turn the Rod Anticlockwise With a Wrench

Put a wrench on the other end of the extension rod and turn counterclockwise. The tire will begin to drop as you turn. Continue turning until the tire touches the ground when you can remove the cable flange from the rim.

Furthermore, you can use the procedure above on different models of Chevrolet trucks. As such, you can follow the steps if you’re wondering how to remove spare tire from Chevy suburban.

Final Thoughts

It’s always an unpleasant experience when you get a flat tire. It’s even worse when you can’t get the spare down for lack of the specialized factory tool.

However, there are other ways to bring down the spare tire even without the tool. These methods are straightforward and use common tools like extenders, flathead screwdrivers, sockets, ignition keys, chunks of wood, pliers and hammers.

Thus, with or without a factory tool, you can get the spare tire out in minutes and be back on the road quickly.

 

Where is the jack located on a Dodge Ram?

In this post we will talk about a topic that will be useful to everyone. Whether it's a flat tire or you want to replace your brake pads, knowing where the jack on the Dodge Ram is needed. Truth be told, without a jack you won't be able to lift the car and therefore change the wheel, or access the components behind it, like the brake pads, for example. To do this, we will first show you the different types of jacks, then where the jack is located on the Dodge Ram, and finally how to use the jack on your vehicle.

What are Dodge Ram jacks?

So we start our article with the various jacks that exist. In truth, although in general most Dodge Rams will be equipped with the same type of jack, there are still different styles with different uses, here they are: of all, usually installed on entry-level models or with a few options. This type of jack has only one articulated arm that sits under the vehicle and allows it to be raised. This type of jack is light, easy to use, but does not allow you to lift large loads. 9dodge ram lift a higher payload. dodge ram These jacks are heavier, generally less bulky, and have the advantage of being much easier to use and able to lift a larger load. Their purchase will cost from 20 to 50 euros, here is a simple and effective model from Oscaro.

.

Where is the jack for the Dodge Ram?

Now we'll start with the part that definitely made you come to this post, where's the jack on the Dodge Ram? This may seem simple, but depending on the make and model of the car, the location of the jack varies. Please note that most Dodge Ram vehicles are equipped with a jack, otherwise you will have to find a puncture protection spray or a compressor. Whether you bought your Dodge Ram or borrowed it, you may not have this information. We are going to provide you with various jack locations on your vehicle, these locations may vary depending on the year and trim of your Dodge Ram:

  • The jack is usually found in the trunk of your Dodge Ram. To get to it, just lift the carpet in the trunk and you should find it and the spare tire.
  • In the rear wheel well: In a similar but less common location, your jack may be in the trunk, but on the side of the trunk, you just need to open the hatch on the right side of the trunk to get to it.
  • The last place to jack your Dodge Ram is under your car. If you still have the spare wheel, you will place it under the trunk, in most cases you will have to unscrew the nut to be able to free it and the spare wheel.

How to use a jack on a Dodge Ram?

Finally, we'll quickly show you how to use the jack on your Dodge Ram. Whether your Dodge Ram's wheel or brake pads need to be replaced, the procedure remains the same. This procedure may seem complicated, but you just need to follow a few guidelines to use the jack safely:

  • Before lifting the Dodge Ram, be sure to apply the handbrake as well as the gear to block the wheels.
  • Unscrew the wheel nuts of the wheels you want to work on before lifting the vehicle, otherwise you risk damaging the transmission.
  • Start raising the jack (approximately 20 centimeters) and place it under the vehicle at floor level; in most cases, you will find a notch to place it in the right place.
  • Raise your Dodge Ram, don't worry about it, if your tire is three inches off the ground, that's enough.

If you have any further questions about the Dodge Ram, do not hesitate to contact us. Dodge Ram category.

used and new - Zapchasti

Dear customers, using Viber or Telegram, we ONLY advise on the purchase. You can place an order ONLY on the website or by phone!

Spare parts filter

Dodge group categories All models

Hide model list Open model list

Didn't find the model you were looking for in the list? Use the search in the catalog

Recommended products

Spare parts for cars - this is the product that will always be in demand, because cars break down, beat, require preventive maintenance.

Online store Zapchasti.lviv.ua offers to buy Speakers in a car for Dodge (Dodge). Spare parts for the most popular brands and models of cars are available for purchase. We offer used and brand new original parts.

Genuine New Parts - Car Speakers for Dodge (Dodge)

It is often very, very expensive to buy original new parts, like Car Speakers for Dodge (Dodge) from an official representative. But what if you don't want to exchange for used ones? One possible option is an online auction like Allegro.pl. The online store Zapchasti.lviv.ua provides such an opportunity. You will be able to choose from several advantageous offers for Speakers in cars for Dodge (Dodge) at once. We will save you from any risks of buying spare parts abroad.

When is it better to buy used Speakers in cars for Dodge?

In cases where the speakers in the car for Dodge (Dodge) are really in good condition, without physical damage and signs of wear. The Zapchasti.lviv.ua online store offers real photos of spare parts, and also facilitates communication with a Polish seller.


Learn more