How to reset prius tire pressure light

How to Reset Your Tire Pressure Light

Skip to main content

Hide Show

Sell/Trade Us Your Car | Click Here To Learn More

Your tire pressure light provides a critical reminder to restore the pressure in your vehicle's tires when it gets low. You should only attempt to reset the light after first addressing the tire pressure in every tire. Once your tires are at the appropriate pressure, the light may go off on its own. If it doesn't go off right away, driving at 50 mph for about 10 minutes should help the tire pressure sensor reset.

If the tire pressure light is still on, there are a few more tricks you can try:

  • Turn the car key to "on" but don't start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.
  • Disconnect the positive battery cable while the vehicle is off. Turn the car on and press the horn for three seconds to discharge the remaining power. When you reconnect the battery the tire pressure light should be off.
  • Overinflate all the tires (including the spare) with 3 PSI, then deflate them completely. Re-inflate the tires to help reset the light.
  • Bring your vehicle to our service center for professional assistance.

IS TPMS the Same as Tire Pressure Light?

Image via Unsplash by introspectivedsgn.

 TPMS stands for Tire Pressure Monitoring System. The tire pressure light is one component of this electronic system, providing a visual alert when your tire pressure is low. The TPMS monitors tire pressure using either an indirect or direct method.

An indirect TPMS measures the rate of revolution for each wheel. If a wheel starts spinning faster than anticipated, the system signals to your vehicle's computer that something is amiss with the tire rotation, and your tire pressure light comes on. You must manually reset the monitor in an indirect TPMS system.

A direct TPMS uses pressure monitoring sensors in each tire to monitor tire pressure exactly. This is a more accurate alternative to an indirect TPMS system. The batteries inside these sensors will last for about 10 years. Direct TPMS systems reset automatically after tire inflation or rotation. You do need to have these sensors resynchronized when you get new tires, which requires a special tool.

Can Cold Weather Cause Your Tire Pressure Light to Go On?

Yes, cold weather will affect the air pressure in your tires. Your tires lose one or two pounds per square inch (PSI) for every 10 degrees that the temperature drops. Cold air condenses while warm air expands. Therefore, the colder air in your tires will take up less space in lower temperatures.

You may find that your TPMS light is only illuminated for a short time in the morning on particularly cold days. After about 20 minutes of driving, the air will often warm up and expand, restoring proper pressure in your tires. If the light stays on after 20 minutes on the road, you should add air to your tires as needed to restore the proper pressure. Low tire pressure is hazardous for your vehicle regardless of the cause.

Why Is My Tire Pressure Monitor Light On When My Tires Are Fine?

When the tire pressure monitor light is on, the first thing you should do is check the pressure in each of your tires, including the spare. Check the manufacturer's recommendation to determine the appropriate pressure for each tire. This is typically between 30 and 35 PSI but may vary. You should measure tire pressure when the tires are cold, which means they have not been driven in the last three hours.

To check the pressure, simply unscrew the valve cap and insert a tire gauge into the valve stem. The gauge will provide a clear reading. Replace the valve cap when you're finished. If your tires are all at the appropriate pressure, there's a malfunction with your TPMS. Bring your vehicle to an authorized dealership service center to diagnose and resolve the issue.

Is it OK to Drive With My Tire Pressure Monitor Light On?

If the tire pressure monitor light is on, you should check your tire pressure as soon as possible. Low tire pressure creates a serious hazard on the road. According to the National Highway Traffic Safety Administration, 738 people died in tire-related crashes in 2017. When tire pressure is low, the tire has more contact with the road. This may cause the tire to overheat, leading to tread separation, excessive tire wear, or a blowout.

Low tire pressure also wreaks havoc on your fuel efficiency. You can save up to 11 cents per gallon simply by keeping your tires properly inflated. You'll also save money on tire replacements with adequate inflation. Keeping your tires properly inflated can add 4,700 miles to the tire's average lifespan.

The tire pressure monitor light gives you valuable information and should not be ignored.

Do I Need to Replace My TPMS When I Get New Tires?

You do not necessarily need to have your TPMS sensors replaced with new tires, but this is a good time to check them and make sure they're still in good condition. If you have an indirect TPMS system, your mechanic will need to manually reset the sensors after changing your tires. If you have a direct TPMS system, no additional maintenance is required to reset the system.

A new TPMS system will typically last for about 10 years before the batteries run out. If you have an older vehicle, you may need new sensors every five or six years. Your mechanic can advise you on the best time to replace TPMS sensors for your vehicle. When new sensors are installed, the system must relearn the location of each tire, which requires a detailed series of technical procedures. You should leave this task to a professional. 

If you need tire service for your Toyota, come to Kings Toyota for prompt, reliable service. Our highly-trained technicians are equipped to assist with any type of tire issue, whether you need new tires or have a malfunctioning tire pressure sensor light. Make your appointment today.

Make an Inquiry

* Indicates a required field

First Name*

Last Name*

Contact Me by*


How To Reset Tire Pressure Sensor TPMS Light on Toyota Prius

How To Reset Tire Pressure Sensor TPMS Light on Toyota Prius

Nick | September 18, 2020 | Guide, Vehicle | No Comments

Last Updated on September 18, 2020 by Nick

How To Reset Tire Pressure Sensor TPMS Light on Toyota Prius (2006-2021) – Toyota Prius is a hybrid car with both a combustion engine and an electric motor. A petrol engine is economical at a continuous speed and consumes more fuel at a varying pace. The reverse is true for an electric motor: it is very efficient at varying speeds and less suitable for long distances and high speeds.

The Toyota Prius has undergone a minor rejuvenation treatment for the 2006 model year. Nothing has changed in the so-called “hybrid drive.” The third-generation Prius was launched in June 2009. The latest Prius was equipped with a larger 1.8-liter petrol engine, and the other dimensions of the car were also increased.

Table of Contents

  • How To Reset Tire Pressure Sensor TPMS Light on Toyota Prius (2006-2021)
  • 2006-2015 Models (XW20/ XW30)
  • 2016-2021 Models (XW50)

Tire pressure monitoring system (TPMS) or also known as TPWS on Toyota cars is a system that provides a real tire pressure report to the driver. If the TPMS warning light appears on your 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Toyota Prius, it is necessary to reset the TPMS. Depending on the vehicle model you have, here are a few ways to reset the TPMS. 

2006-2015 Models (XW20/ XW30)

Time needed: 7 minutes.

This is the second and third generation of the Toyota Prius. In this generation, your vehicle will be equipped with a TPMS reset button. Follow these steps to do it:

  1. Stop the vehicle and turn off the engine

    Tire pressure reset process cannot be done while the vehicle is moving.

  2. Adjust the cold tire pressure in all four tires recommended on the tire placard

    The tire placard located on the door panel

  3. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal

  4. Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times.

    Each model year has a different button location

  5. Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off.


2016-2021 Models (XW50)

Unlike the previous model year, on this latest model, you have to enter the system menu to reset the TPMS. Follow these steps to do it:

  • Stop the vehicle and adjust the tire inflation pressure recommended on the tire placard
  • Turn the ignition key to the “ON” position without starting the engine
  • Go to [wp-svg-icons icon=”cog-2″ wrap=”i”] menu by using the ◄ ► navigation button
  • Scroll down and select the VEHICLE SETTINGS menu
  • Select TPMS
  • Press and hold the OK button until the “Initialization Completed” appears on the display

These instructions are based on the Toyota Prius owner’s manual. This procedure should apply to the second, third, and fourth generation of the Toyota Prius (2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Tire Pressure Sensor TPMS Light on Toyota Prius (2006-2021) can solve your problem. Good Luck!

Tags:2006 Toyota Prius, Prius Tire Pressure Reset, Prius Tire Pressure Sensor, Prius TPMS Light Reset, Toyota Prius Tire Pressure, Toyota Prius TPMS Reset

About The Author

Hi! Greetings, I'm Nick. I am an automotive technician and a vehicle enthusiast. I'm an expert in the field of engine oils and lubricants. After working at the dealer service station for more than a decade, I was happy to be the editor and author of the articles on automobiles.

report this ad

How to reset the tire pressure sensor Toyota Prius?

You are the proud owner of a recent car, the pleasure of tactile gadgets, the integrated technology should bring you the ease and comfort of using your Toyota Prius, however, which is to say that the technology is talking about electronic, and as we all, unfortunately , know that sometimes there are problems to fix. Today we will look at the tire pressure sensor and exactly how to reset the tire pressure sensor on a Toyota Prius so that you no longer have this indicator on the dashboard. To do this, we will divide our article into two parts: first we will consider the classic case of the appearance of the tire pressure indicator light and further operation, and then the case where the indicator in the tires remains on even if the tires are inflated, so how to reset this tire pressure sensor on Toyota Prius.

How to reset the tire pressure sensor on a Toyota Prius? Checking tire pressure

First we will focus on the common way to reset the tire sensor on a Toyota Prius which if it lights up, here are the basic steps:

  • As you probably know, An under-inflated tire can burst or explode if you are driving and your Toyota Prius's tire pressure lights come on, get out of the way quickly if you are driving on a highway, keep a firm grip on the steering wheel just in case.
  • Once stopped, visually check the condition of your tires , if one of them is completely flattened, change the wheel, if it is only under-inflated, go carefully to the gas station.
  • Check the tire pressure of your Toyota Prius with a pressure gauge and follow the manufacturer's recommendations. on a sticker in the driver's door.
  • If you find during this re-inflation that the tire is damaged, replace it. on the Toyota Prius. The indicator should disappear or turn off after a few seconds. . In the event that this is not the case, we advise you to review the following sections.

How to reset the Toyota Prius tire pressure sensor that stays on when the tire pressure is high that didn't work, we'll move on to the second alternative, which is that the tires on my Toyota Prius are well inflated and I still want that light to go away. Maybe it means you have

Faulty tire pressure sensor. This requires to reset the value on your car's dashboard. However, be careful not to do this while driving as pressure fluctuations will interfere with your sensors. In most cases you have to go through the vehicle configurations, then you have to find an option to detect inflation or "detect deflation", once on this tab you have to hold the select or reset button according to the year of your Toyota Prius until a message from the console appears car confirming that the reset is taken into account (usually takes a few seconds). You can now turn off the ignition and restart your Toyota Prius to see if the tire pressure light has gone out.

Additional solution for resetting the tire pressure sensor on a Toyota Prius: replace the faulty tire pressure sensor it is the

tire pressure sensor on the valve which is faulty or faulty on your Toyota Prius . Keep in mind that in general the unit price is around 120 euros. Another alternative that some choose to use as the problem may recur in some series is to disable the sensors with your carrier and diagnose your vehicle. However, this procedure is not recommended as it may result in improper handling and malfunction of your Toyota Prius. Now you have all the keys in your hands to know how to reset the Toyota Prius tire pressure sensor.

For more Toyota Prius tips, take a look at the Toyota Prius category.

Reset tire pressure sensor for Toyota Prius


Frequently asked questions about cars and motorcycles
  1. by car
  2. :
  3. Toyota
  4. :
  5. Prius
  6. : Reset tire pressure sensor on Toyota Prius

Toyota Prius - Video Lesson

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: inspection and maintenance
operation: Reset tire pressure sensor on Toyota Prius

Let's see how the tire pressure sensor is reset on a Toyota Prius. A very simple action: enter the back of the car, turn on the dashboard (we will see that the service light is constantly on). We press the button (Set), located under the steering wheel in a fixed way (as in the video) and wait for the sensor to be reset. Once the tire maintenance reset is activated, we can release the button (we will see that the warning light above the dashboard stops flashing).

Learn more