How to reset tire pressure light hyundai elantra


Where Is The TPMS Reset Button On A Hyundai Elantra? - Car, Truck And Vehicle How To Guides

Emma Davies

If you have just inflated the tires of your Hyundai Elantra, your TPMS light may not switch off immediately. If the TPMS in your Hyundai Elantra needs to be reset, the first thing you need to do is find the tire-pressure reset button. 

In this article, we cover where the TPMS reset button is on a Hyundai Elantra and also provide a guide on how to reset the TPMS. 

Where Is The TPMS Reset Button On A Hyundai Elantra?

The location of the TPMS reset button can vary between cars. The TPMS reset button in a Hyundai Elantra is usually found under or to the side of the steering wheel.  However, the exact location of the reset button can vary between models.  

2011 Hyundai Elantra

In the 2011 model of the Hyundai Elantra, the tire-pressure reset button is found in the right lower area next to the steering wheel. 

2013 Hyundai Elantra

The TPMS reset button is underneath the steering wheel in a 2012 Hyundai Elantra. However, if you want to locate the TPMS reset button in a Hyundai Elantra 2013, you will find it to the right of the steering wheel. 

2019 Hyundai Elantra

In newer models, like the Hyundai Elantra 2019, the TPMS can be found on the left-hand side, under the dashboard. 

How Do You Reset The TPMS On a Hyundai Elantra?

Once you have located the TPMS in your Hyundai Elantra, you will be able to reset the tire-pressure monitoring system.  

Here is a step-by-step guide to resetting the TPMS on a Hyundai Elantra: 

1. Put the key in the ignition and turn to the ‘ON’ position  

2. Do not start the car 

3. Press and hold the TPMS reset button until the tire pressure light blinks 3 times.

4. Release the TPMS button

5. Start the car 

6. Wait 20 minutes for the sensor to reset 

Following these instructions will reset your tire-pressure monitoring system. Resetting your TPMS after inflating your tires is very important as it helps you to maintain an accurate knowledge of your tire pressure. The tire-pressure monitoring system will inform you that you need to inflate your tires by switching the tire pressure light on when necessary. 

How To Turn Off The Tire Pressure Light In The Hyundai Elantra

If your tire pressure light stays on or continues to flash after resetting your TPMS, there are several methods you can use to turn the light off. 

Usually, the light will switch off after you have driven a few miles, following the inflation of your tires. However, in some circumstances, the light will stay on.

If the tire-pressure light in your Hyundai Elantra stays on after you have reset the TPMS, try the following: 

  1. Start the car and drive for 10 minutes. Driving for around 10 minutes at 50 miles per hour should reset the sensor in the TPMS.
  2. Deflating and reinflating all the car tires (including the spare) can reset the TPMS sensor. Inflate all the tires to 3 PSI above the recommended amount – the recommended tire pressure for a Hyundai Elantra is 33 PSI – and then let all the air out. Once you have inflated all of the flat tires the TPMS should reset and the light will switch off. 
  3. Disconnect the positive battery cable in the car engine when the car is off. Once the cable is disconnected, turn the car on and press the horn for approximately 5 seconds. Honking the horn will dispel the last of the power in the car. Reconnect the positive battery cable and the system will reset. 

If your tire pressure light won’t turn off in your Hyundai Elantra after following these instructions, check your owner’s manual or visit a mechanic for a professional diagnostic and repair.

The lights on a car dashboard are powered by a battery. If your tire-pressure light continues to flash, it may be an indication that there is an issue with your vehicle’s battery. 

FAQs

What Is the Right Tire Pressure for a Hyundai?

The correct tire pressure for a Hyundai Elantra is 33 PSI. Tires can lose approximately 1 -2 PSI per month and it is important to regularly check the pressure of all the tires on your Hyundai. The TPMS helps drivers to stay up to date on their car’s tire pressure. Drivers should check their car tire pressure at least once a week, especially during the colder months. 

Why Is My Tire Pressure Light on When My Tires Are Fine?

Sometimes the tire pressure light may stay on even when tires are fully inflated. This may be because the TPMS needs resetting. You may need to wait 20 minutes after resetting the TPMS before the light goes off, or try driving for ten minutes above 50 mph. The tire-pressure light may continue to flash if there is a problem with your car battery.  

Do You Need to Reset TPMS After New Tires?

You will need to reset the TPMS after you have new tires fitted on your Hyundai Elantra. The TPMS will monitor the pressure of your tires and inform you when a tire needs inflating. You should always reset your Hynudai’s TPMS after changing your tires, rotating your existing tires, and after adding air to your tires. 

How Does a TPMS Work?

Vehicles use either direct or indirect TPMS to monitor the air pressure in the car’s tires. If your car has a direct TPMS, there will be a sensor in the wheel which measures the air pressure. If the air pressure in the tire drops 25% below the recommended PSI level, that information is transmitted via the wheel sensor to the computer system. Once the car computer system receives this information, the dashboard tire pressure light will be triggered. 

An indirect TPMS works with a car’s Antilock Braking System’s wheel speed sensors. The dashboard indicator light is triggered when the computer system is informed by the sensors that the tires are moving at different speeds. When a tire’s pressure is low it will roll slower than the other tires. 

Hand fill air into a car tire.

Conclusion

Keeping your tires inflated is essential, not only for the health of your car but for your safety too. The TPMS needs to be reset after inflating your tires, doing so should turn the tire pressure light off and reset the monitoring system. 

If you have been driving around with your tire pressure light flashing on the dashboard, we hope this article has helped you learn where the TPMS reset button is in a Hyundai Elantra. The tire pressure light may not turn off immediately, if this happens, we have provided you with a guide on how to turn off the tire pressure light in a Hyundai Elantra. 

Check out some of VehicleFreak’s posts here:

Can I Take My Hyundai To Any Dealer For Service?

How Long Do Hyundai Accents Last?

How To Reset The Hyundai Sonata Tire Pressure Sensor

Hyundai Elantra: Reset TPMS - HiRide

by Rachel Jones

When the TPMS indicator light comes on, it could mean that your tires are underinflated. Underinflated tires can create risky driving conditions because of possible tire bursts and undue tear and wear. If you are struggling with resetting TPMS in your Hyundai Elantra, this guide is for you.

Contents

  • 2019 – 2022 Models
  • 2007 – 2018 Models
  • FAQs
    • Why is my TPMS light on even after adjusting my tire pressure to the recommended level?
    • Is it necessary to reset TPMS after fitting in new tires?

2019 – 2022 Models

  1. Turn the ignition to the on position without running the engine.
  2. Locate the TPMS button on the left-hand side of your steering wheel under the dashboard.
  3. Press and hold the TPMS button for at least ten seconds or until the TPMS light blinks three times.
  4. Release the TPMS button.
  5. Start the engine and wait for about 20 seconds.
  6. The TPMS light should turn off.

2007 – 2018 Models

You need a TPMS Relearn tool and OBDII Module to reset TPMS on these Hyundai Elantra models. You can purchase a TPMS Relearn tool online or in an auto accessories store.

  1. Adjust the tire pressure to the level recommended on the tire placard.
  2. Select your Hyundai Elantra details, including the make and model year, in your TPMS tool.
  3. On your TPMS Tool menu, select OBDII.
  4. Use the TPMS Tool to scan each sensor, beginning with the left front tire and then moving to the others in the following order, RF, RR, and LR.
  5. After storing all sensor IDs, use the TPMS tool’s up and down arrows to select On-Board Diagnostic (OBD).
  6. Press the Enter button
  7. Turn on the ignition without running the engine.
  8. Connect the OBDII connector to the TPMS tool and your car’s OBDII port. Ensure the OBDII port green light is on.
  9. On the TPMS Tool menu, select Upload Car IDs.
  10. Upload the previously-stored sensor IDs.
  11. Wait for a Relearn Complete or IDs uploaded to car message.
  12. After, turn off the ignition, then re-scan each sensor.
  13. Drive your car above 30 mph for fifteen minutes.
  14. Check to see if the TPMS light blinks.

FAQs

Why is my TPMS light on even after adjusting my tire pressure to the recommended level?

Sometimes your TPMS light can remain on even after adjusting to the required tire pressure level. In this case, it’s best to reset TPMS. You can use a TPMS Relearn tool, an OBDII Module, or a TPMS button to reset TPMS.

Is it necessary to reset TPMS after fitting in new tires?

It’s essential to reset our Hyundai Elantra’s TPMS every time you change tires, rotate, or add pressure to existing tires.

Reset TPMS warning light (tire pressure) on Hyundai Elantra MK6

DIY

Frequently asked questions about cars and motorcycles
  1. by car
  2. :
  3. Hyundai
  4. :
  5. Elantra
  6. : Reset TPMS (tire pressure) warning light on Hyundai Elantra MK6

Hyundai Elantra - Video Lesson

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: inspection and maintenance
operation: Reset TPMS (tire pressure) warning light on Hyundai Elantra MK6

Let's see in this video how to reset the tire pressure warning lamp (TPMS) on the sixth series Hyundai Elantra; Before performing this procedure, all four tires must be restored to normal pressure. Then we get into the car and remove the plastic trim, which we find to the left of the steering wheel, by turning on the engine diagnostic connector; then we plug in our tool and check for errors on the vehicle (in this case, the tire pressure warning light). Let's follow the procedure indicated by the device to perform a reset as shown in the video!

Posted on 11 November 2021


How to remove the Audi Q5 dome light

Let's see how to remove and replace the bulbs located in the roof panel dome light on the Audi Q5. With a screwdriver or a plastic lever, pry between the cover of the ceiling and the perimeter of the same (without breaking the plastic), take out the light bulbs to be replaced from the ceiling. We replace damaged light bulbs with new ones (of the same size and voltage). We collect plastic in a case with attached parts. We do the same operation with the rest of the ceiling lights placed in the etto panel. At the end of the assembly, we check the correct operation of the light.

Watch the video!

by ScegliAuto


more videos

  • Posted on 2 July 2022 by ScegliAuto
  • How to reset oil service on Fiat 500X
    Posted on 2 July 2022 by ScegliAuto
  • How to remove headlight on audi a4
    Posted on 1 July 2022 by ScegliAuto
  • How to remove the brake disc on Mitsubishi Pajero
    Posted on 1 July 2022 by ScegliAuto
  • How to disassemble the original radio for Renault Trafic
    Posted on 30 June 2022 by ScegliAuto
  • How to replace the gearbox cover for Opel Meriva
    Published 29June 2022 by ScegliAuto
  • How to disassemble the fuel pump for Hyundai IX35
    Posted on 29 June 2022 by ScegliAuto
  • How to replace the timing belt on a Chevrolet Matiz
    Posted on 29 June 2022 by ScegliAuto
  • How to remove the brush on the rear window Citroen C3
    Posted on 29 June 2022 by ScegliAuto
  • How to remove the side airbag driver (steering wheel) on the BMW 3 series
    Posted on 28 June 2022 by ScegliAuto

How to reset tire pressure sensor in Hyundai Elantra?

You are an enthusiastic owner of a recent car, the pleasures of tactile gadgets, the integrated technologies should bring you the ease and comfort of using your Hyundai Elantra, which is nevertheless important, since technology speaks of electronic, and, as we all, unfortunately, know quite often. problems to be solved. Today we will look at the tire pressure sensor and exactly how to reset the Hyundai Elantra tire pressure sensor so that this indicator never appears on the dashboard again. To do this, we will divide our content into two parts: first we will focus on the classic situation when the tire pressure indicator appears and the procedure to follow, and then on the circumstance that the tire indicator remains on despite the tires being inflated. So how to reset this tire sensor on hyundai elantra.

How to reset tire pressure sensor on Hyundai Elantra? Checking tire pressure

First, we will focus on the general procedure to reset the tire sensor on the Hyundai Elantra, which if it lights up, here are the main methods:

  • Hyundai Elantra tire pressure indicators turn on, get out of the way quickly if you are driving on the highway, hold on to the steering wheel just in case.
  • Once stopped, visually check the condition of your tires , if one of them is completely flattened, change the wheel, if it is only under-inflated, go carefully to the gas station.
  • Check the tire pressure of your Hyundai Elantra with a pressure gauge and follow the manufacturer's instructions. on a sticker in the driver's door.
  • If you notice during this re-inflation that the tire is damaged, replace it.0039 The logical process of how to reset the tire pressure sensor on a Hyundai Elantra. The indicator light should have gone out or gone out after a few seconds. . If this is not the case, we suggest that you review the next section.

How to reset a Hyundai Elantra tire pressure sensor that is still on when the tire pressure is high it didn't work, we'll move on to the second method, namely, the tires on my Hyundai Elantra are well inflated, and I still want this light to go away. This probably means you have

Faulty tire pressure sensor. This will require to reset the value on your car's dashboard. However, be careful not to do this while driving as pressure fluctuations will interfere with the pressure sensors. In most cases, you need to look at the parameters of the vehicle, then you should find an option for inflation detection or "deflation detection". While on this tab, you must hold the select button or reset button according to the year of your Hyundai Elantra until you see a message on the car console confirming that the reset is being taken into account (usually takes a few seconds). You can now turn off the ignition and restart your Hyundai Elantra to see if the tire pressure light has gone out.

Replace tire pressure sensor removal solution on Hyundai Elantra: Replace faulty tire pressure sensor

If, despite your reset, the tire pressure indicator on your Hyundai Elantra does not turn off, then the most reasonable option is to go to a workshop, probably , it is the tire pressure sensor on the valve that is faulty or faulty on your Hyundai Elantra . Keep in mind that in most cases the unit price is around 120 euros. Another alternative that some choose to do because the problem may recur in some series is to disable the sensors with your carrier and diagnose your vehicle.


Learn more