Emma Davies
If the tire pressure monitoring light comes on in your Hyundai Sonata, it means one or more of the car’s tires are under or overinflated. Car tires need to be inflated to a specific PSI to keep you safe whilst driving on the road and to prevent any damage to your tires.
The recommended PSI for a Hyundai Sonata is 34. If the tire pressure monitoring system finds the tire pressure to be too high or too low it will trigger the tire pressure light on your car dash to turn on. Once your tires have been inflated to the recommended PSI, the tire pressure sensor will need to be reset.
If you do not know how to reset the Hyundai Sonata tire pressure sensor, we have all the information you need in this article. Keep reading for our step-by-step guides on how to reset the TPMS in all Hyundai Sonata models from 2007 to 2020.
When the TMPS sensors find one or more of your tires do not have the correct air pressure, a warning light will illuminate your car dashboard. The tire pressure warning light looks like a horseshoe with an exclamation mark in the center. Depending on what model and specification Hyundai you own, you may also get a warning message displaying which tire needs the air pressure correcting.
If your tire pressure light has been illuminated, it is important that you check your tires as soon as possible. If you cannot stop your car safely straight away, you should take the following steps –
Whilst a TPMS is a very useful system to have installed in your vehicle, regular tire maintenance and observation should not be ignored.
The TPMS can detect when your tires do not have the correct air pressure but it is important that drivers continue to check the tread of their tires, especially in the colder months.
Resetting the TPMS sensors on your Hyundai Sonata is only necessary after inflating your tires if the system hasn’t automatically reset itself and the tire pressure light remains illuminated on the dashboard.
However, it is important to always reset the TPMS after changing or rotating your tires, this is so the sensors are able to accurately monitor the air pressure of the new tire/newly positioned tires.
Leaving your TPMS light on after inflating your tires, means you may not be aware of any problems with your tires in the future. Drivers can get used to having the tire pressure light on at all times, therefore not knowing exactly if and when a tire needs attention.
Keep reading for our step-by-step guides on how to reset the Hyundai Sonata tire pressure sensor.
The easiest way to reset the tire pressure sensor in all Hyundai Sonata cars is to drive the car for at least 10 minutes at a speed of 50mph or more.
If after traveling for 10 minutes the tire pressure light is still on, you will need to perform a manual reset. The method below will work in all Hyundai Sonata models from 2007 right through to 2018.
Step 1: Turn the key to the ON position but do not start the engine.
Step 2: Locate the TPMS reset button (usually underneath or to the side of the steering wheel).
Step 3: Press and hold the tire pressure monitoring reset button until the tire pressure warning light flashes 3 times.
Step 4: Release the TPMS reset button.
Step 5: Start the car and leave the engine running for 20 minutes to completely reset the sensor.
Step 6: Once the TPMS sensor has been manually reset, the tire pressure light should turn off.
If you can not find a TPMS reset button in your Hyundai Sonata, this may be because the system can not be manually reset and there is no button to be found. The TPMS in the Hyundai 2020 and 2021 models should automatically reset after you have driven for approximately 10 minutes at speeds of 50mph or more, after inflating the car tires.
However, if you have recently added new TPMS sensors to your tires, you may need to relearn the new sensors to your vehicle’s tire pressure monitoring system. Most Hyundai vehicles will automatically program new sensors but in some cases, the TPMS light may stay on and a relearn may be necessary.
Here is a step-by-step guide on how to relearn new TPMS sensors for your Hyundai Sonata.
Step 1: Keep the vehicle stationary for 15 minutes after fitting the new sensors.
Step 2: Follow instructions in your car user’s manual to put your Hyundai into “relearn” mode – this can be done by using the dashboard controls. You may need to use a scanner to scan your sensors and update the ID codes into your car’s computer, check with your local Hyundai dealership if you are unsure.
Step 3: Drive above 20mph for around 20 minutes to allow the new sensor IDs to be learned by the vehicle.
TPMS stands for Tire Pressure Monitoring System. The TPMS is used in the majority of modern car models, including cars manufactured by Hyundai.
The tire pressure monitoring system monitors the air pressure in the car tires and sensors will automatically transmit a warning (the tire pressure light turning on) to the driver. The tire pressure light will activate when a tire is under or overinflated.
Where is the TPMS reset button on a 2017 Hyundai Sonata?The TPMS reset button in a 2017 Hyundai Sonata is located to the right of the steering wheel.
The TPMS reset button in a 2013 Hyundai Sonata can be found under the steering wheel.
If your tire pressure light stays on after filling the car tires there may be issues with the tire pressure monitoring system. There may be a slow leak in one of your tires that is triggering the TPMS lights or it may be a sign that your car battery is low on power or there is a broken sensor in the system.
Where is the TPMS reset button on a 2015 Hyundai Sonata?Like in the 2013 model, the tire pressure reset button is found under the steering wheel in the 2015 Hyundai Sonata.
What is the tire pressure for Hyundai Sonata?It is important that you inflate your car tires to the ideal pressure, driving over or underinflated can be dangerous and damaging to your tires. The ideal tire pressure for a Hyundai Sonata is 34 PSI.
Resetting the TPMS sensor in a Hyundai Sonata is a quick and easy process. If after inflating your new tires you notice the TPMS sensor light is still on, by following just a few simple steps you can have the system reset in no time.
If you need to reset the TPMS sensor in your Hyundai, we hope you have found the information in this article useful. In most cases drivers do not even have to manually reset the TPMS, the sensors and light should all automatically reset after the car has been driven for approximately 10 minutes.
Check out some of these Hyundai car guides from us:
Can I Take My Hyundai To Any Dealer For Service?
Where Is The TPMS Reset Button On A Hyundai Elantra?
How to Reset Tire Pressure Light on the Hyundai Tucson – TPMS Sensor Reset
by Liam Dare
Hyundai Sonata is a modern car model with the latest tech devices and settings. This allows people to drive comfortably while its modern signaling systems keep them updated about any warning or fault in the system.
The tire pressure monitor system is also an integral part of modern cars, including Hyundai Sonata, allowing you to know the tire pressure status in the car tires. The tires must remain inflated to a specific pressure to keep the car safe and prevent damage to life and the car.
Hyundai Sonata manual recommends a constant pressure of 34 PSI for the tires. The TPMS can find the tire pressure and indicate if it is too much or lower than the prescribed in any tire.
The light of the TPMS goes on when it finds any discrepancy and then has to be rested after inflating the tires to the recommended pressure. Here are the simple steps to reset the TPMS in your Hyundai Sonata, but before that, you must know some more aspects about the same.
Contents
The TPMS must be reset to the original reading after checking the tire pressure and inflating the tire. The system can reset automatically in many cars, and the warning light will go off.
That is not the case with the Hyundai Sonata, and the system may not revert to the original reading even after you have inflated the tires, and the warning light may also remain on. This means the sensor is not reading the tire pressure of newly inflated tires. This may also happen after tire change and rotation of tires.
The TPMS resetting will help it detect the tire pressure changes again and signal to the drivers. If the light is always on, they may not even check the tire pressure until it is too late and a major incident happens due to low tire pressure.
TPMS can signal to the driver through a bright light on the dashboard. This may look like an exclamation mark with an inverted U-shaped light.
When it detects low or high tire pressure, the mark becomes bright red to warn you. The latest cars also indicate the tire- front/ back/ left/ right tire too.
It would be best if you immediately reduced the speed of the car.
Then stop at a safe place and get down. Check the tire pressure and refill using a portable air pressure machine if you have one or go to the nearest gas station/ service center.
If it fails, then it is time for a manual reset.
You may not find a TPMS button in more recent models of Hyundai Sonata, and the system is supposed to take care of the rest on its own. For example, the latest models have an automatic system that will turn off the warning system after ten minutes of driving at 50 miles per hour in the last few years.
Similarly, the new TPMS systems in the older models also may not be manually reset. But they will need to relearn the system in your car. The system must follow a few steps to relearn the new TPMS.
TPMS or the tire pressure monitoring system in the car may be automatic. But even then, the car may have to relearn the new sensor system when it is changed.
If the sensor system is automatic, you do not have to worry. But if it does not reset automatically, you must reset the warning system using the above tips.
The TPMS is an important warning system to detect and warn about the pressure in tires. The reset button is located within easy reach below the steering wheel.
The TPMS must be reset every time you inflate the tires to optimum pressure. It may occur automatically after driving for a few minutes. But if it doesn’t reset, you must use this button to reset the system manually.
Similarly, the TPMS must be reset when replacing the sensors with a new one.
The steps must be followed meticulously to ensure that the system resets quickly. These steps are effortless to follow and you can reset the TPMS on your own.
If the system does not reset, it will remain on, and the warning light will stop bothering you. But you will never know when the tire pressure is not correct again. Reset the TPMS in your Hyundai Sonata and check tire pressure often.
As CEO of ReplicarClub.com, my passion for the automotive world motivates me to build online businesses that provide information and entertainment to users. I am proud to contribute in a positive way to the automotive community.
...
Errors › How to reset a tire pressure error?
Generally you need to go through the car configurations, then you should find the option to diagnose inflation or "detect deflation" when in this tab you should hold the select or reset button according to the year of your Hyundai Sonata.
4 ways to turn off the low tire pressure indicator (TPMS):
Not needed Tire pressure light came on while driving and does not go out What is happening on the dashboard: the icon on the tidy turns on and stays on. What it means: Air pressure is low in at least one tire. What you should do: Check your tire pressure with a pressure gauge as soon as possible.
What to do if this error lights up? It's simple: turn on the ignition and press the sensor initialization button, hold for a few seconds (4-7) and voila ... the setup is complete.
How to activate the TPMS sensor?:
The triggering occurs when the magnet is brought close to the sensitive area of the sensor. In this case, you can do the following:
Use the +/- keys to scroll to the bus you are working on; Shake the sensor to wake it up; Hold the sensor so that it physically touches the driver's monitor just below the SET button, gently press the CODE key and immediately release it.
To do this, bring the device to the left front wheel (as close as possible to the sensor/nipple) and press/hold the activation button on the device. A horn will sound. Then repeat the procedure in the following order - front right wheel, rear right wheel, rear left wheel.
How to identify a faulty tire pressure sensor The first step is to check the operation of the sensors. To do this, you need to start the engine and see if the tire pressure warning light on the dashboard is on or off.
In some cars, the ECU is responsible for this directly.
DIRECT TIRE PRESSURE MONITORING SYSTEM
Sensor life is 6-8 years or 180,000 kilometers. The vehicle receives readings transmitted at 433 MHz or 315 MHz from each of the sensors and locates them using special unique identifiers stored in the vehicle's memory.
Increased pressure is an overstrain of cord threads, increased wear of the middle part of the tread. In addition, when driving on a bad road, the shocks that are transmitted to the suspension and body will become more noticeable for riders. When hit in a hole, the likelihood of a tire rupture increases.
It is enough to install a resistor. To lower the output voltage and make the motor think it's up in the mountains. When the “XX sign” disappears, the sensor will switch to the intake manifold pressure measurement mode.
The manufacturer recommends that the air pressure in the recommended tire sizes be 2.2 bar on both front and rear wheels.
What happens if DBP is disabled? Fuel will be unnecessarily consumed, which leads to additional costs. Disabling the absolute pressure sensor, the signs of a malfunction of which make themselves felt, is not an option. It is recommended to check the DBP yourself or seek help from the master.
If the sensors are already installed in the wheels and there is no way to find out the ID using the equipment, it remains to remove the wheel, bend the tire and see what is indicated on the body.
The procedure for programming wheel pressure sensors (TPMS) is carried out when replacing faulty sensors with new ones, or when replacing a set of wheels seasonally (winter/summer).
When replacing only a set of tires with old wheels, reprogramming of the pressure sensors is not required.
The procedure for linking a new tire pressure sensor is carried out in the following order:
Changes in air temperature, as well as heating of the tire itself, lead to a change in tire pressure. The clutch drops, maneuverability deteriorates, the frame deteriorates, and fuel consumption increases.
Low tire pressure also leads to rapid tire wear, reduced mileage and even bursting. If the tire pressure is approximately 30 percent lower than required, tire life will be cut in half.
With the right pressure, the tires steer precisely and roll easily. This reduces fuel consumption and improves driving comfort.
The outer sensor is mounted on the outside of the wheel valve. The internal sensor is located in the place of the standard wheel valve, while its sensory part is located inside the tire. The tire pressure sensor is installed on each wheel and has an independent power supply.
The tire pressure lamp can be operated in several modes. If it just blinks, this means that the initial basic installation of the system and sensors has not been completed.
The lamp lights up when the pressure reducing valve is broken. If the oil level is insufficient, this valve closes. If this part sticks, the pressure in the system drops, the light comes on. Low pressure is due to clogging of the mesh through which oil enters the pump.
The pressure in the engine oil system is constantly monitored by an oil pressure sensor. Therefore, if this device fixes the value of pressure below or above the permissible value, the oil pressure light on your dashboard lights up.
This is a tire pressure monitor. If the tire pressure indicator lights up, you need to check their condition and pump up, if necessary. And, then, you press this button and hold it for 4-5 seconds, you will see an indication on the display so that the system remembers this state of the tires.
TPMS vehicle tire pressure and temperature monitoring system.
Hyundai Creta tire pressure sensor reads the tire diameter and identifies the situation with the change in the number of revolutions at a certain speed. The system constantly monitors the situation by checking with the ABS.
When the machine is parked, measurements are not taken.
Also, the performance of the oil pressure sensor can be checked by another method. So, you need to remove the power wire from the sensor and short it to ground. If the sensor is working, then the signal light on the dashboard should not light up. Otherwise, the sensor is defective.
Sensors mounted on the nipple of the car wheel, measure the pressure and temperature of the air in the tire and transmit information about the pressure value via radio to the display. When the tire pressure changes, the system transmits information with sound signals and displays it on the display.
To check the electronic pressure sensor you will need a multimeter and a pump (preferably with a pressure gauge). Before starting the test, it is necessary to remove the sensor from the car and switch the multimeter to the “open” circuit diagnostic mode.
Connect the sensor to the pump and connect a multimeter to it.
When "re-shoeing" the car in winter tires, you must always pump the wheels at least 0.2 atmospheres above the recommended. So we compensate for the pressure drop in them due to the cold.
To summarize, for most passenger cars, the recommended constant tire pressure ranges from 2-2.5 atmospheres. This is the norm not only for a comfortable and safe ride, but also for fuel economy. Tire manufacturers also indicate pressure on the label.
If your display shows "Low pressure" and the pressure gauge connected to the tire valve shows the correct values, you need to do the following manipulations: Drive at a speed of 80 km / h for 15 km. Then stop and turn off the engine. The onboard computer will then reset the controllers.
Reduced pressure leads to an increase in tire deformation, more heat during the rolling of the wheel, accelerated wear of the outer tread tracks.
Perhaps even a violation of the integrity of the frame. As a result, fuel consumption increases. When hit in a hole in the road, the likelihood of damage to both the disk and the tire is higher.
Tire pressure sensor reset:
Press the button (i) and hold it for 3 seconds (entering the function programming mode) - the first section of the SPEED ALARM setting will appear. Next, you need to press the button (i) and go to the tire pressure monitoring section (low pressure icon) and press the SEL / RESET button.
| DIY
| |||
(Different brands) various - Video lesson Model: (Different brands) various When the pressure in one of the four Hyundai Sonata tires is insufficient, the tire pressure warning light comes on. The pressure of each individual tire is shown on a display centrally located between the tachometer and speedometer. The correct tire pressure is indicated on the driver's door pillar: when each tire returns to the indicated pressure, the tire pressure warning light turns off automatically, without the need to perform any other procedures.  |
