Item Number: TRT105
Price is per EA:
$5.50
TECH COLOR CODED INJURY MEASURE TOOL quantity
Weight: 0.15 lbs
| Item Number | Unit of Measure | Box Quantity |
Shelf Life | ||||||
|---|---|---|---|---|---|---|---|---|---|
| TRT105 | EA | 1 | N/A | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Commonly used with: UL6S UNI-SEAL ULTRA STEM 1/4″ (6MM), BOX OF 20, UL6 UNI-SEAL ULTRA 1/4″ (6mm), BOX OF 14, CARBIDE CUTTER 3″ (75mm), 1/4″ (6mm) INJURIES
Color-coded injury measuring tool made of the highest quality materials and designed to make tire repair jobs easier and faster
Measures the size of the injury allowing for proper sized tire repairs
UPC: 743813005991
INJURY MEASURE TOOL
Other related results:
products. techtirerepairs.com
TRT105 - TECH COLOR CODED INJURY MEASURE TOOL - TECH ...
TRT105 - TECH COLOR CODED INJURY MEASURE TOOL · Color-coded injury measuring tool made of the highest quality materials and designed to make tire repair jobs ...
products.techtirerepairs.com
931 - WIRE BUFFER FOR RIM & BATTERY TERMINAL - TECH ...
TECH974 - TECH WIRE BRUSH - TECH Ecommerce TECH Tire & Wheel Solutions | Vol. 80. Repair Tools & Accessories. TECH. TRT105. 931. Miscellaneous Hand Tools.
products.techtirerepairs.com
TECH974 - TECH WIRE BRUSH - TECH Ecommerce
TECH974 - TECH WIRE BRUSH - TECH Ecommerce TECH Tire & Wheel Solutions | Vol. 80. Repair Tools & Accessories. TECH. TRT105. 931. Miscellaneous Hand Tools.
techtirerepairs.com
TECHNICALLY SPEAKING
THE YELLOW BAND OF THE TECH TRT105,. THE TIRE MUST NOT BE REPAIRED. Note: There are brands of Sound Suppression tires that have an adhesive layer under the .
..
techtirerepairs.com
TECHNICALLY SPEAKING
THE TIRE MUST NOT BE REPAIRED. THE YELLOW BAND OF THE TECH TRT105,. Uni-Seal Ultra repair. Determine the size and angle of the injury using ...
Home
/
Wheel and Tire
/
Wheels and Accessories
/
Wheel Installation Kits
/
Part # 91603280
Wheel and Tire
/
Wheels and Accessories
/
Wheel Installation Kits
/
Part # 91603280
#91603280
by
Speedway Motors22 Reviews
|
Ask a Question
5, 5x4.75, 5x5, and 5x5.5See More
$99.99
each
In Stock
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Steel, Bare
See more details
Key Specs
| Brand | Speedway Motors |
See more specs
Need To Know
Free Shipping on Orders Over $149
Shipping Policies & FAQs
Need help?
855.
313.9176
View the Help Center
Quick and Easy Returns
Return Policy
Much like wiring, measuring for proper wheel and tire fitment is considered a stressful adventure in the automotive hobby.
It’s nothing for most enthusiasts to bolt on some performance go-fast bits, or even weld up an exhaust system, but when it comes to figuring out what wheel dimensions will work (or that aforementioned wiring) all bets are off and the second guessing starts in earnest.
Sure, some will throw a spare wheel that is lying around the shop on the car and check fitment, or even borrow a wheel from a friend. Still others will ask total strangers on social media what “should” fit and hope they’re correct. Why not take the stress and inaccurate guesswork out of your wheel and tire fitment with our new Wheelfit wheel fitment tool on your next project?
Confirming your wheel specs, including backspacing and offset, to order new or custom wheels can be accomplished in no time with our wheel backspacing tool. Simply assemble the wheel fitment calculator tool extensions inside the tire you plan to run and secure the sidewall clamps.
Bolt the hub mounting plate to the extensions and you’re ready to mount your tire and take some measurements with our wheel offset measuring tool! It’s that easy!
Our wheel fitment tool is made from 10 gauge steel and laser etched with pertinent measurement points. The wheel offset tool is much sturdier than plastic models that have been on the market (that don’t use an actual tire) and is a much better value than the cast aluminum models as well with precise wheel bolt pattern mounting options in all major five-lug bolt patterns using 1/2-inch studs, plus 5x4.75 with 7/16-inch studs. These specific wheel bolt patterns and stud hole sizes create a much more accurate mounting versus universal slots that inject slop into your fitment check.
Everything you need is included in the wheel fitment tool kit to measure for 14 to 20 inch wheel diameters from 7 to 17 inches wide! Just supply the front and rear tire sizes you will be using, assemble and mount the tool with tire secured to your axle flange or front hub.
Once secured with at least two wheel lug nuts you can check for frame and suspension clearance by cycling your suspension up and down with a floor jack (unbolting or removing your shocks/coilovers may make this easier). Turning your front wheels from lock-to-lock will confirm steering angle changes will not create tire to frame/sheetmetal interference as well. Easily loosen the wing nuts and adjust the tool’s backspacing for optimal tire clearance and then lock the adjustment down. Remove the wheel backspacing tool and measure your final backspacing needs to order your new or custom wheels.
Specs
Wheel offset and backspace are two of the most misunderstood wheel terms, but they are at the center (no pun intended) of your wheel measurement needs to ensure your custom wheels fit your application. Our new wheel fitment simulator tool helps immensely, but you still must do some basic math. The tool verifies a specific tire size and placement, and then you take some final measurements from this tool and input them into some basic math formulas (see our Installation Tips section).
First, let’s provide a few quick definitions here to help you:
Overall Wheel Width: This is the total width outside of the wheel lip flange, usually 1-inch wider than the inside “stated width” wheel lip measurement the tire seats. This is measured without a tire mounted using a ruler or measuring tape across the wheel and is expressed in inches.
Wheel Centerline: This is the overall wheel width measurement divided by 2 to halve the dimension, giving us the true centerline dimension of the wheel, expressed in inches.
Backspace: This is simply the distance from the wheel mounting face (where it sits on your brake rotor or drum) to the rear outside wheel lip flange. This is measured using a straight edge across the back of the wheel (without a tire mounted helps) and a ruler or measuring tape from the mounting face to the straight edge and is also expressed in inches.
Offset: This is the measurement between the wheel mounting face and the centerline of the wheel’s width.
This one is a little harder to measure, especially on wheels that are solid or have small window openings between the spokes, and confusing enough to some it is expressed in millimeters that can be either a positive or negative dimension.
| KEY SPECS | |
|---|---|
| Brand | Speedway Motors |
| GENERAL | |
| Notes | Supports all common 5-lug wheel bolt patterns, does not support 4-lug or 6/8-lug vehicles |
| Material Type | Steel |
| Sold in Quantity | Each |
| Finish | Bare |
| Warehouse | Supply | Info | Balance | Price BYN | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AS Minsk | In stock | % AND | 2 pcs | 21. 60 | |||||||||||
| Moscow | 03.03 15:45 | AND | 1 pc. | 18.61 | |||||||||||
| Moscow | 03.03 16:45 | AND | 3 pcs | 18.61 | 4719152111385 | ||||||||||
| Country of manufacture | TAIWAN (CHINA) bestseller Description Pressure gauge for monitoring tire pressure and inflation. Dial diameter 75 mm. Two-scale graduation allows you to control the value in terms of PSI (external scale) or BAR (internal scale). The pressure gauge is equipped with a rubber-polymer protector, which prevents damage to the device in case of careless handling. Application area Pressure control, release and inflation device is used to service pneumatic tires of wheeled vehicles, construction and agricultural machinery in the operating pressure range from 0 to 12 bar (12.24 kgf/cm²). The product is equipped with an analogue pointer pressure gauge of class 2.5 GOST 2405-88, equipped with a deformation type mechanism. Specifications
download manual CONTENTS
WARRANTYSpecial purpose tools and fixtures manufactured by JONNESWAY® ENTERPRISE CO., LTD. repair and maintenance of engineering products, strictly by personnel with appropriate qualifications, familiar with safety regulations, operating conditions and skills in working with special tools and fixtures. JONNESWAY® branded special purpose tools and accessories are covered by a “limited warranty” due to reduced life due to increased wear on some parts during use. The service life of the product with the declared characteristics is defined as 12 months from the start of using the tool. Start of operation is determined by the date of sale indicated in the JONNESWAY® warranty card or fiscal document confirming the purchase of a particular product. Claims for a tool that fails within the warranty period will be considered by an authorized representative of JONNESWAY® ENTERPRISE CO., LTD., in accordance with the Consumer Protection Law. Warranty-free products that failed as a result of:
In this regard, the manufacturer strongly recommends:
1) Select and use the tool in accordance with the work performed and strictly for its intended purpose. 2) Do not hit the body of the tool or the elements of the product with other objects, if this is not provided for by the design. 3) Do not drop the tool from a great height onto a hard surface. 4) Do not store the tool for a long time in conditions of high humidity or other environments aggressive to the materials of the product. 5) Do not allow yourself to repair and adjust the tool during the warranty period. 6) Proper and timely maintenance of the tool. 7) When using special devices and diagnostic tools, be guided solely by the manufacturer's recommendations for the repair and operation of the serviced equipment. 8) Correctly and timely clean the tool from dirt. . Claims under this warranty will not be accepted if the qualifications of the user cannot be verified, there are signs of unauthorized repairs to the products, design changes, or self-installation of non-genuine components and parts of the products. The manufacturer reserves the right to determine the cause of product failure (due to poor quality materials, assembly errors, human error or other reasons).  |
