Tire scraper heat gun
Tire Equipment
Pit Equipment Headquarters
Dino Paoli & Red Devil Wheel Guns
Greaves 3D Engineering, GDS Motorsports
O: 704.508.1667
150 Ostwalt Amity Rd. | Bldg D-101
Troutman, NC 28166
- Our wheel baths have an aluminium framework and stainless steel bath.
- The bath is design to accommodate a range of tire sizes as well as bare rims
- Wheel rollers for ease of use
- Integrated rubber and debris filter
- Integrated hose reel.
Greaves 3D offer a range of tire heaters. The vertical tire oven utilises trollies that are wheeled into the oven.
- Hot air is fed through the centre of the rims ensuring both the rim and tire are heated evenly
- Stainless steel framework, flat packs for transportation
- Individual compartments to avoid loss of heat
- Ventilation flaps on the side of the cover
- Temperature measurement access central zip
- Direct and indirect space heaters available
- Stainless steel tire trollies. Various positions to allow transport of rims as well as fitted units
- Vertical tire trollies – suitable for use with tyre ovens
- Optional company logo
- Custom length poles and flat packs for transport.
- Improves speed and efficiency of tire cleaning
- Tire scraper holder
- Pedal to assist in tire rotation
- Improved ergonomics
- A must have for TS-03 Users
Used to accurately pump fuel in and out of your car and or fuel rig, you can clean up your garage by eliminating dump bottles and improve your accuracy with the integrated scale.
- Made from stainless steel and aluminium our fuel transfer bowser has a 100l capacity, a 30l per minute bi directional pump with automatic full tank pump shut off and is built with atex approved components
- Mass and temperature display and speed controller
- Dash 12 fuel lines – suitable for E20 and high octane fuels. Optional dry break fittings
- Storage draw for fuel lines and charging cable
- Integrated batter charger, emergency stop and automatic full tank audible alarm
- Anti-static braked castors
Below is a sampling of equipment for re-fueling the car in the paddock and pit lane!
Developed around Greaves 3D successful race program, our easy to use tire equipment is developed to improve your on track performance
- Our tire scrapers have been design and tested by tire technicians
- With a moulded handle for user comfort, the integrated heat gun has variable temperature and fan speed
- 2000W output – 100 to 600 degree temperature range
- 300-600l/min maximum airflow
- Avoid damaging tyre compound by using unsuitable tools and/or excessive temperature
- Removes pick and debris with ease leaving a smooth undamaged surface
- Adjustable handle and blade position to suit the user
- Ergonomically design to increase productivity
United Race Parts © 2018 All Rights Reserved | 704. 508.1667
150 Ostwalt Amity Rd | Bldg: D-101 | Troutman, NC 28166
Employment Opportunities
Heat Gun Scraping Rubber off of a Race S... | Stock Video
Save up to 20% on your first order •
Apply HELLO20
Related Categories
- race,
- tires,
- phantom,
- gun,
- heat,
- tire,
- slow,
- racecar,
- car,
- motion,
- camera,
- knife,
- hand,
- slow motion
Types of heat guns used for space heating
Electric heat gun
An electric heat gun warms up the surrounding air with the help of heating elements, which can be in the form of:
- conventional coil, capable of heating up to critically high temperatures, which, if not provided with additional protection, can be dangerous;
- heating element, in which all indicators are higher than that of a spiral, and it consumes electricity more economically;
- ceramic heaters, characterized by safe use and high efficiency (more than that of spirals and heating elements).
But their significant drawback is the relatively high cost.
Powerful fans are used to circulate air in the gun, thanks to which the temperature rises in a matter of minutes. As a rule, electric models are equipped with special wheels or skids that provide convenient movement and installation of the gun. This model is popular because:
- is compact: there are no large combustion chambers;
- works almost silently;
- does not require additional maintenance;
- does not require the consent of the controlling government agencies for the installation and use of the gun.
The electric heat gun is compact and only requires a mains connection
Gas heater
A gas heat gun is recommended to be installed in rooms with good ventilation, since liquefied or main propane is used for its operation. When the gas hose is disconnected, the heat gun will turn into an ordinary powerful fan.
Despite the use of gas, the unit does not emit any smoke or smell during operation, so it can be installed even in residential premises. It is important that the efficiency of the gun is at one hundred percent, which is very beneficial from an economic point of view.
The principle of operation of gas guns is the combustion of gas in a closed chamber, which heats the heat exchanger. The fan drives the air near the heat exchanger, where it warms up and exits.
A gas heat gun is much larger than an electric one, but it has a low heating cost.
The biggest advantage of gas guns is the low cost of heating, especially if the device is connected to the mains. In addition, the guns are small in size and operate almost silently. Minus - the equipment can only be installed with the permission of the gas facilities, good ventilation must also be organized.
Diesel heat guns
Diesel heat guns have a high level of efficiency at a low cost of resources. Thanks to this, they are indispensable both in the domestic and industrial sectors. There are two types of diesel guns:
- direct heating, in which the emitted gases are not separated and enter directly into the room. Because of this, they are recommended to be installed in non-residential and little-visited buildings with good ventilation. But on the other hand, they have a huge efficiency and low fuel consumption;
- indirect heating - equipped with special chimneys that allow gases to be removed outside the room. They are inferior to the previous version in performance, but they can be installed in residential buildings.
Diesel heat guns of indirect heating are equipped with a chimney
The disadvantages of diesel heat guns include rather large dimensions (even the simplest model takes up a third of the desk) and the need to obtain permission to install in the room.
Any questions you may have regarding heat guns will be answered by our managers, who can be contacted by phone: +7 (495) 540-48-00 or +7 (800) 333-13-53.
Gas heat gun Vitals GH-151
UAH 3 450
UAH 3 450
Characteristics: (Watch all)
Weight
3. 8 kg
Warranty
36 months
Maximum operating temperature
115 ° C
Power
15 KW
Power supply
in
Delivery Delivery across the country in 1-2 days. Payment Pay quickly and conveniently Cumulative discounts Collect bonuses and gifts
- Product description
- Characteristics
- Reviews0
- Questions0
Thermal gun gas vitals GH-151
main
weight
3.