1 inch tire gun

- FORCE-VOLGA

Tool and car accessories

payment and delivery warranty and return contacts

Volgograd, Khorosheva 77, Mon-Fri: 8:30-19:00, Sat: 9:00-17:00, Sun: 9:00-16:00

Minimum mark-up
. 29433 items
in stock. Free delivery of
around the city when buying
from 1000R. 15 years on the market.

• CATALOG
• Car service equipment

Select subcategory

• Jacks and related pumps
• Compression gauges, fuel gauges, oil gauges, manometers and vacuum gauges
• Compressors
• Cranes, traverses, hydraulic stands, stands, lifts

Sort: DefaultName (A - Z)Name (Z - A)Price (low > high)Price (high > low)Rating (highest first)Rating (lowest first)Model (A - Z)Model (Z - A)

Display: 255075100

Sandblast gun FORSAGE F-2375

Nozzle: 4.5, 5mm Hose with probe for sand-1m Air consumption 160 l/min Dimensions gun L 21.5 cm x..

2093 р.

Movili pistol "KINGTUL" KT-2374

Type: remote with bottom tank, professional Purpose: chemical processing. composition under pressure R.

845 R. nine0003

FORSAGE blow gun 130mm F-2373

TYPE: AIR BLOW GUN FUNCTION: AUTOMOBILE, PRODUCTION, HOUSE (FOR CLEANING FROM DUST, STR..

410 r.

Oil for hydraulic system OIL RIGHT 1L

Highly refined distillate oil with additives that improve antioxidant, antiwear.

290 р.

Blow gun "DG-10-2"

Blow gun with compressed air DG-10-2 with 50 mm nozzle...

254 р.

Pneumatic drill 1600 rpm JTC-3837

JTC-3837 Angle pneumatic drill, chuck 10mm, rotation speed 1600 rpm. Flow rate 300l/min...

88080021 p.

AIR WRENCH WRENCH 1/2 720Nm ROTAKE-5270

Air Wrench Rotake RT-5270 Fitting 1/2" Maximum rotation speed 7000 rpm. ..

6111

JACK (RAIL) CLUTCH AvtoDelo 43601

Rack jack hook for lifting the car by wheels or elements of a power body kit. Auto..

2710 r.

FORSAGE F18/35 PNEUMATIC STAPLER

FORSAGE F18/35 PNEUMATIC STAPLER can work with both staple and nail...

15609 р. nine0003

Showing 1 to 75 of 1587 (total 22 pages)

ASK A QUESTION

Question text:

features, loads and uses

A cable or rope clamp is a rigging product that fixes loops on steel ropes or splices ropes. It would seem that everything is very simple, but:

1. These rigging elements are used in highly loaded structures, which implies that they must be made of metal that is resistant to friction, transverse and longitudinal deformations. How is this achieved? nine0021
2. In construction work, for example, several clamps are attached to the cables, located one behind the other. It may be that the load is higher than that allowed for the attachment unit. A simple increase in the number of weak fasteners will not help to fix the structure. Why?

These and other details are laid out on the shelves in the article.

Types of clamps

what is the beast, briefly - by pluses and minuses

For simplicity, we divide the clamps conditionally into three categories, and in each category we denote the most important subspecies:

Traditional, used for splicing ropes and creating loops on them:

• Disposable
• Staples
• Cam
• Flat (tire)
• Cylindrical (DOUBLE)
• Crimp

Flat, used as traditional:

• Single (SIMPLEX)
• Double (DUPLEX)

Special, the range of use of which is narrow and makes them indispensable:

• Phillips
• Stoppers
• Collet
• Lanyards

Disposable

Short cylinders made of aluminum or other soft metal. It splashes along with the threaded ends of the rope, squeezing it tightly. Least reliable and cheapest design. nine0003


Plus	Cons
+ Cheap	-Unreliability
+Quick installation	- Disposable

Staples

The most common traditional type of clips in the form of a U-bracket. Easy to install and dismantle, reusable, no loss of performance. nine0003

The nuance of use is almost complete unsuitability for high loads. A small contact patch with the rope causes cutting deformation - a break or damage to the rope at the attachment point.

Plus	Cons
+ Cheap	-Small contact patch
+Quick installation nine0170	-
+ Reusable	-

Cam

Bracket analogs, two mirrored seats with integrated threaded bushings. More convenient than the U-shaped, rarely found on the Russian market.

Like the older brother, it has a small contact patch with the cable.

Plus	Cons
+ Cheap	-Small mounting spot
+Quick installation	-
+ Reusable	-

Flat (bus)

A clamp, the cross section of which is a Latin W. The counterpart is similar to a pipe spread along. Places of adjoining to a cable - corrugated, provide good fixing.

With such a clamp, cutting deformations can not be feared.

Plus	Cons
+ Reliability nine0170	- Expensive
+Easy to install	-
+ Reusable	-

Cylindrical (DOUBLE)

It is also a ring in Africa - a ring (well, or two half-cylinders with coupling screws).

It is produced in small sizes (cable 3-4 mm), i.e. you can fasten cables up to the thickness of the wire (within reasonable limits). Stainless steel - as the main material of manufacture - allows the use of the ring in tandem with ropes made of non-ferrous metals, stainless steel. Harsh environments, in short, do not threaten your designs. nine0003

Plus	Cons
+ Reliability	- Expensive
+ Reusable	-

Crimp

In the common people - a barrel. Two embossed plates with cylindrical grooves for laying the cable, which are tightened with a screw. We can say the king of elevators and other lifting mechanisms. nine0003

It is produced both from non-ferrous metals and from steel, depending on the purpose.

Plus	Cons
+ Reliability	- Expensive
+Easy to install	-
+ Reusable nine0170	-

Flat Single (SIMPLEX)

As mentioned above, the larger the contact patch with the cable, the more secure the mount, this clamp is a direct confirmation of this.

At its core, two plates (with and without sides), fixed with a bolt and nut. The presence of the sides prevents the cable from slipping sideways under load, which also has a positive effect on the maximum allowable loads. nine0003

Plus	Cons
+ Reliability	- Relative high cost
+ Reusable	-

Flat double (DUPLEX)

Two spliced ​​single (SIMPLEX) products. nine0003

As Ellochka the Ogre would say, ironically! Installation of stretch marks on high-voltage poles of power lines and TV antennas - time to spit. To fix the load when it is lifted to a great height - too. And it's not a figure of speech.

Plus	Cons
+ Reliability	- Relative high cost
+ Reusable	-

Phillips

Let's say you need to connect two lines at right angles. You need a cross! Not Orthodox, of course, but we advise you to pray, because such a fastener cannot be called ultra-reliable. However, there is enough reliability for the rope mesh. As they say, who studied for whom.

It is made in the form of a cylinder in which steel ropes are stacked on top of each other and fixed with a screw. nine0003

nine0167 -

Plus	Cons
+ Indispensable when creating intersecting structures	- Expensive
+Easy to install	-Small range of applications
+ Reusable

Stoppers

Just a stopper - that's all. Doesn't splice anything, doesn't support anything. Its task is to tightly grasp the cable and prevent the movement of loads suspended on it, roughly speaking, it thickens the line at a selected point.

Plus	Cons
+ Indispensable when creating a stopper nine0170	- Narrow range of applications
+Easy to install	-
+ Reusable	-

Collet

A tip whose task is to accurately dock the rope with the structural elements to which it is attached. It does not provide 100% reliability. I'll tell you a secret, it's better to make a loop. nine0003

Plus	Cons
+Easy to install	-Unreliability
+ Reusable	- Narrow range of applications

Lanyards

A typical industrial climber's quick release. They hang all sorts of loads for him. The product consists of levers that fix it on the line when a load is applied to the mounting ring. nine0003

Plus	Cons
+Easy to install	- Expensive
+ Reusable	-

What materials are used for

clips

what is your saddle made of, wanderer? nine0119

The three main materials from which cable clamps are made are (very predictably!): stainless steel, hot dip galvanized and zinc coated mild steel. Consider the example of a saddle.

Stainless steel A2 and A4. Your choice for outdoor and harsh environments. Corrosion resistance out of the box.

Hot dip galvanized steel. Feel free to take it if you want to save money. Use in adverse environments is limited, but more than meets the required loads. Corrosion resistance is less than that of stainless steel. nine0003

Soft galvanized steel. According to deshman, that means, according to deshman. The material is not resistant to corrosion (however, you cannot pick off the galvanization with your finger). If you need something for everyday life, the best option.

However, remember that when building highly loaded structures, it will be necessary to check the attachment point at least once every three months for complete eating by rust. Hehe. Joke.

Clamp dimensions

Size matters! Everyone needs a reliable and safe design, but how to ensure it? nine0003

Rope without sheath? This means that the clamp is selected according to the diameter of the cable.

Cable in a braid? Nuance! The workload limit of an assembly or trunk will be reduced by 30-35% if the braid is not removed because the clip body will be in contact with soft and pliable vinyl.

The use of such a connection on heavily loaded cables is unsafe!

As a result: fasteners to the braided rope are selected according to its diameter without braiding. From the points of the highway where the clamps will be located, I will remove the braid. That is life? No, technology nine0003

Clamp classification according to DIN

• DIN 741. Standard, not designed for lifting applications.
• DIN 1142. Reinforced fastener equipped with two hex nuts and washers for better clamping. It has a long operational reserve even in conditions of constant temperature fluctuations.
• DIN 3093. By its design, this is an aluminum sleeve that allows you to connect several cables to each other to achieve the required total length. nine0021

DIN 741

The DIN 741 standard is fasteners with two hex nuts. This product is widely used in all industries.

Features:

• Used with ropes from 3 to 40 mm in diameter.
• The length is 21-88 mm, the width is 10-45 mm and the height without detachable lug is 10-55 mm.
• Eye rod diameter - 4-16 mm, center distance between its ends - 9-58 mm.
• Male Hex Nut Thread - 1/8 to 1 in.
• Weight standard: 100 pieces of these products, depending on the size, can have a mass of 1.4 to 104 kg.

Made of steel or A4 stainless steel. Products with a protective zinc coating applied by galvanic or hot method are common. The reinforced analogue of DIN 741 is marked DIN 1142.

DIN 1142

nine0002 The DIN 1142 standard is used for the manufacture of rigging devices used in conjunction with lifting mechanisms. DIN 1142 is of great importance in construction, where it can be used as an element of rope stretching.

Features:

• The case is 12 to 68 mm long and 13 to 49 mm wide.
• Product seat height - 13-77 mm.
• Total height of part including U-bolt can be from 25 to 159mm.
• Thread for fixing nut - M5-M24.
• U-bolt spacing 12-68mm.

The product DIN 1142 is a critical structural element, and strict requirements are imposed on the material from which it is made. These clamps are produced from galvanized steels or A2 and A4 stainless steels.

DIN 3093

The DIN 3093 standard is an aluminum sleeve. It is a flattened hollow cylinder. It is used for splicing steel ropes together, as well as for making loops at the ends of the rope. nine0003

Features:

• Rope diameter used - 1.5 to 40 mm
• Hole width B - 3.6 to 88 mm
• Sleeve length L - 5 to 140 mm
• Material thickness S - 0.5 to 17 mm

Clamp Installation Instructions

As mentioned above, clamps are widely used for creating loops and splicing cables. When carrying out such work, it is required to comply with technological standards, since improper installation can reduce the maximum working load of the backbone node by 40%. nine0003

First you need to make sure that:

• No nicks, dents or cracks on the product.
• The size of the product corresponds to the size of the cable.

Traditional Clamps

Step one. The first fastener element is located at a small distance from the free end of the loop. Nuts or bolts are tightened alternately until the required torque is reached.


nine0002 Step two. The second is placed closer to the loop, so that it has a minimum deformation course. Travel can be checked by flattening the loop towards the clamp after installation.



Step three. The third is positioned exactly between the first two. This takes into account that the mating parts of the clamps (those from which the nuts or bolts are tightened) must be directed upwards.




Step four. A section of the highway is loaded with a load equal to or greater than the required one. The tightening of nuts or bolts is checked and, if necessary, increased. nine0003

When splicing, the algorithm for installing clamps will be the same.

Flat - Simplex and Duplex

They are used in the same cases as traditional ones, but they have a different design. Consider below their installation on the example of DUPLEX.

Step one. Make sure that the product is complete, the parts are in good order, the nuts do not go tight on the thread.

Step two. When creating a loop, place the product closer to its beginning, when creating a loop or splicing, position the cable inside the clamp as shown in the figure. nine0003

Step three. Install the mating part and tighten with nuts. Apply a load to the structure equal to or greater than necessary. Check the tightness of the nuts, tighten if necessary.

Installation of the SIMPLEX clamp

Installing the DUPLEX clamp

Special clamps

With regard to special types of clamps, it is impossible to give a general algorithm of actions, however, since it is not possible to position them except for their intended purpose, tight tightening of the fasteners solves the issue of their reliable installation. nine0003

Frequently Asked Questions (FAQ)

- Is it possible to fasten a rope with a clamp?

- No, we get the same situation as with the braid. The rope is made of easily deformable material, and therefore it is almost impossible to carry out high-quality fastening.

- If I want to install a cable to protect my parking space, does it make sense to buy expensive clamps? nine0169

- The need for expensive products arises when high tension or displacement loads are applied to the cable. It makes no sense to buy expensive clamps to build an unloaded cable structure.

- Is a special tool required to install this fastener?

- Depending on its type, the following set of tools may be needed: a hammer, a sledgehammer, a screwdriver of the required size (flat, Phillips or hex), pliers or a wrench of the required size. nine0119

- Can traditional clamps be used with a steel cable to tow a car?

- In 80% of cases it is impossible, and it is good if such an experiment does not end in failure.

- Why doesn't increasing the number of weak clamps increase the working load of the cable structure?

- The main load that is applied to the rope is longitudinal tension. Consequently, under critical loads, the cable either bursts if the clamps are designed for the load, or slips out of any number of weak fasteners. nine0119

Chains, slings, rigging Updated: 14.07.2022 15:35:01

Maxim

Specialist in the field of fasteners and rigging products.

---

Learn more

• 
  How to fix a tubeless tire off the rim
• 
  Metal valve stem installation instructions
• 
  How to make an atv disc harrow
• 
  How to make a tire snowman
• 
  How to put air in a lawn mower tire
• 
  How to make a flat tire look like an accident
• 
  How to fix tired looking skin
• 
  How to remove tire marks from pavement
• 
  Tire damage pictures
• 
  How to reset tire pressure on hyundai elantra
• 
  Liquid tube tire sealant chart