How do you get colored smoke tires


How To Make Coloured Burnout Tyres Smoke

9 Jul 2015, 05:40 pm

Gallery9

EVER since Henry Ford started power-sliding his 539-cube Sweepstakes racer in 1901, burnout smoke has been white. Always. But this changed a while ago when a couple of enterprising competitors rocked up to an event with expensive imported tyres that made coloured smoke, blowing everybody away.

MORE

Check out our Burnout videos

Enter Highway Tyres. They’re no strangers to the burnout scene, having supplied burnout maestro Steve Loader with his tyres of destructive choice for the past few years. And it was this relationship, combined with a competitor survey Highway conducted at the 2012 Ultimate Burnout Challenge (where more than 100 people expressed interest in buying coloured burnout tyres), that moved Highway to make these specialised tyres locally, giving birth to the Highway Max Coloured Smoke burnout tyre. Nowadays, the colour of a burnout competitor’s tyre smoke is as much a part of their signature as their machinery and array of tyre-frying tricks.

9

So what’s the secret behind coloured smoke? First, we need to explain why a regular tyre makes black smoke when you throw it onto a fire, yet produces white smoke when it’s flung around a doughnut pad.

For a tyre to ignite (ie burst into flame), it needs to be heated to at least 400 Celsius for some time. The physical act of burning the tyre not only releases the petroleum products used in its manufacture, it also releases a cocktail of toxic chemicals that includes benzene, lead, and even more esoteric toxins such as polycyclic aromatic hydrocarbons (PAHs) – all of which are extremely dangerous to breathe. It’s this concoction of burning oils and chemicals that creates the thick, dark cloud of smoke when a tyre combusts.

9

In a burnout, the tyre spins rapidly on the tarmac creating friction and so heat, though the temperatures reached are well short of what’s needed to ignite it. The heat created from the abrasive spinning action oxidises certain compounds within the rubber, which vaporise and are released as white smoke (the grey tinge often seen in burnout smoke is caused by fine rubber particles mixed in with the smoke).

MORE

Australia set to reclaim burnout world record at Summernats 32

The secret to creating coloured burnout smoke is to introduce particular compounds into the raw rubber that vaporise in a coloured plume at the temperatures created during a burnout. So what are these compounds? Well, Highway Tyres aren’t saying. Think of it as the tyre’s 11 secret herbs and spices.

9

As for how they’re made, Highway Tyres are Aussie remould specialists, and so their Coloured Smoke tyres are high-quality remoulds – which certainly helps keep costs down. To ensure they’re up to the brutality of a stout burnout, Highway specifically selects only the best carcases. The tread and sidewalls are buffed, removing just the right amount of material. A thin layer of fresh rubber is then applied to the sidewalls before the all-important, pre-coloured rubber is applied to the tread area. At this stage the tyre looks more like a slick. Also, the pre-coloured rubber looks identical to the non-coloured variety, so a coloured stripe is added to aid identification. From there the tyre goes into the segmented press where, over a period of 32 minutes at 155 Celsius, the tread pattern and sidewall are moulded.

| Watch next: The best gender reveal burnouts - Video

After a final inspection, which includes inflating to 65psi and spinning it up to check balance, it’s ready to destroy the nearest burnout pad. As Karl from the warehouse says, “This is one of the few industries where all the hard work goes up in smoke – we love it!”

Highway Max Coloured Smoke remoulds are just as tough and long-lasting as their regular remoulds – an attribute Steve Loader has proved time and again. However, Highway do not wish to promote illegal street burnouts. Therefore their coloured tyres are for competition only.

To add colour to your next skid, contact the experts at Highway Tyres. They have outlets in every state. Go to www.highwaymax.com.au to find out where.

Craig Parker

Journalist

Simon Davidson

Photography

How to Use Gender Reveal Burnout Powder to Get Colored Smoke

Table of Contents

  • Share
  • Tweet

Congratulations! Someone knows the sex of the new baby (or is about to), and now it’s time to plan the big gender reveal. Maybe the parents are really into cars, or they love those videos of big clouds of colored car smoke revealing the gender of the baby. So you know you want to do a burnout at the party. But how do you get colored burnout smoke for a gender reveal?

The answer is simple: you just need gender reveal burnout powder. But you might still be wondering how to use gender reveal burnout powder.

No problem! I’ll walk you through step-by-step how to use burnout powder. I’ll also discuss how many packs you need to get, what the best kind of powder is, and, well, how to do burnouts in general. This is one of my favorite methods of revealing a baby’s gender! It’s relatively safe and has a huge impact for a big onlooking crowd of friends and family.

via manny_oh on Instagram

What is a Gender Reveal Burnout?

A tire burnout gender reveal is quite simple, but can be done in a number of ways. You could get burnout gender reveal tires that have special colored rubber compounds that are then spray-painted black to conceal the surprise until the burnout.

However, this method is very expensive (because tires in general are expensive). The burnout also takes longer to reveal the color. This is because you have to burn through the spray paint and enough of the tire to release a bright hue.

A cheaper and more commonly used method is to use colored powder concealed in special bags. Some are designed to stick to your tire. These bags burst during the burnout, spraying the powder out behind the car in a dramatic cloud. This method produces brighter colors and usually a bigger cloud of “smoke” (dust) as well.

Some people even put the colored powder directly into their exhaust pipes, either by itself or in addition to the packs under the tires.

Are burnouts illegal?

Burnouts are illegal pretty much everywhere on public property. On private property, however (like your driveway), it isn’t specifically illegal… But you could still be charged with disturbing the peace of endangerment if a neighbor or police officer wanted to press the issue.

For this reason, it’s recommended that you do a gender reveal burnout on private property set far back from the main road. You should also do it during normal daytime hours, and not late at night when people are sleeping.

Is doing a burnout bad for your car?

If you’re using the right kind of car (we’ll talk about that later) and you’re only planning on doing the one burnout, your car will likely be fine. This is not a guarantee, though. A burnout puts a ton of pressure on a car’s transmission, axles, and driveshaft. Enough strain can cause these things to break down.

A gender reveal burnout should be done by someone with the right kind of car, with experience doing burnouts, and only long enough to throw the powdered dust out behind the car (which will only be a couple of seconds). But know that you are always taking the risk of doing damage to your vehicle when doing a burnout.

Also, burnouts tend to be bad for your tires – so if possible, use a pair of old tires to make this kind of magic happen.

Is tire smoke toxic?

Tires are made of rubber, and rubber is a Group 1 carcinogen. Burning rubber releases airborne latex along with bits of carbon black, oil, sulfur, steel, and other metallic elements.

Does this mean using a gender reveal burnout kit is going to give all your guests cancer?!

Well, not really. One of the factors in how dangerous the “smoke” can be lies in the concentration of the vapors being inhaled. Doing the burnout in a large, open, outdoor area will quickly dilute the cloud of smoke.

Also, when using colored burnout powder, you’re not going to be burning that much rubber; the powder will be creating most of the smoke before the tires even really have a chance to get hot. The powder is usually made of cornstarch – you know, the stuff you eat! Still, inhaling cornstarch has been proven to cause inflammation and even scarring in the lungs.

All of this information just means your guests – and particularly the expectant mother – should stand far away from the car while it’s performing the gender reveal burnout. Don’t worry, they won’t miss that brightly colored cloud of dust.

Do Tires Come in Different Colors?

First of all, if you’re wondering whether it might be easier and/or cheaper to just get colored gender reveal tires for your burnout, the answer is definitely not. Tires are much more expensive than colored powder packs and have to spin for a lot longer to produce a noticeable amount of colored smoke.

That being said, yes, tires DO come in different colors! Highway Max can provide you with a blue or pink burnout gender reveal tire pack in tons of different sizes (and will spray paint them black so no one knows what it’ll be until they start burning!). They are the number one gender reveal burnout tires company in the world. The smoke color is BRIGHT, too – here’s a video of a truck using some of Highway Max’s tires.

How to Use Gender Reveal Burnout Powder

What kind of powder is used for a gender reveal?

As mentioned earlier, most gender reveal powders are made with cornstarch – and those are the only kinds I recommend you use. They are safer for the environment and safer for your guests (though again, no one should be directly in the clouds and inhaling the burnout gender reveal smoke!). Colored cornstarch also won’t damage your car and should wash off easily.

Burnout gender reveal powder is usually just cornstarch mixed with concentrated food coloring. This may leave you wondering… why don’t I just make it myself? A DIY gender reveal burnout is bound to be cheaper, right?

You could, and I even have a tutorial on how to DIY gender reveal powder at home. But it takes a chunk of your time, it’s pretty messy, and it has the potential to go wrong. It’s also really difficult to get the cornstarch back to as fine a powder as it once was (you have to add water to color it). Professional companies are the best at that part!

For these reasons, I recommend you just buy premade colored powder packs. These companies have been making this stuff for years (even before gender reveals were popular) and you’ll know it’s properly colored, dried, and sifted to create the perfect cloud effect.

How much powder is needed for a burnout gender reveal?

Most packaged gender reveal burnout packs include one pound of powder per bag. Two bags (two pounds) of powder should be plenty for your gender reveal if you’re doing a rolling burnout.

If your vehicle is better suited to a standing burnout, you may want to use four bags (four pounds) of powder, directly sticking two bags to each tire. (Many products are designed with this in mind – you simply peel off a sticker and slap the adhesive part onto the tire.) One pack may decide to fly off before busting under the tire.

via ellepons_design on Instagram

How do you do burnouts?

I’m going to walk you through a couple of scenarios of how to do a gender reveal burnout. Blackout gender reveal bags can be used in a burnout a few different ways, depending on your vehicle. These are the three methods for using them, and you’ll need to figure out which one applies to your car:

  • Attach two bags directly to each tire (four bags total) and initiate a standing burnout.
  • Place one bag about three inches in front of each tire and initiate a rolling burnout. You may need to practice the burnout to see just how far the car will jump before catching.
  • Place two bags in the road (one several inches in front of each tire), initiate a burnout, then accelerate over the bags. If done correctly, this method will provide the best effect.

If you’ve never done a burnout before (though I really think you should know how to do one already before attempting one at a gender reveal), this is how it’s achieved:

  1. Make sure you have the right kind of car. It needs to be rear-wheel drive, without question. It doesn’t have to be a manual, but that makes it a lot easier. You’ll also need a lot of horsepower. 4-cylinders won’t cut it. Smoother/balder tires will work the best.

If your vehicle is an RWD manual transmission, this is what you do:

  1. Lock the handbrake.
  2. Press in the clutch.
  3. Put the vehicle in first gear.
  4. Rev the engine up to a mid-to-high RPM.
  5. Release the clutch quickly, then pound the gas and brake at the same time.
  6. Keep a careful eye on your gauges and surroundings until you’re done. If you smell anything other than rubber, stop immediately.

If your vehicle is an automatic with rear-wheel drive, you’ll need to do something like this:

  1. Lock the handbrake.
  2. Hold the pedal brake down.
  3. Put the transmission in the lowest gear possible (for example, my Civic has a D3 option).
  4. Keep holding down your brake, but not too hard.
  5. Hit the gas pedal till the tires start to spin.

No matter what car you’re using and what kind of burnout you’re going for, the key is to practice it first. Nothing’s more disappointing than a failed gender reveal burnout where the bag just pops but the powder doesn’t get thrown back in a big, beautiful blue or pink cloud.

This video is a great example of where you should place your powder bags in front of the tire ahead of a rolling burnout in order to get the best effect.

How to do a gender reveal burnout on a motorcycle or dirt bike

If the parents-to-be are more into motorcycles than fast cars, you may be wondering if you can do a motorcycle burnout gender reveal. The answer is yes – but safety is even more important if you’re going to attempt it.

A motorcycle burnout should only be attempted by a professional/someone who has experience doing them on the chosen motorcycle. Otherwise, you run the risk of an accidental wheelie and your motorcycle possibly falling on top of you. Your brakes could even catch on fire.

You’ll treat a motorcycle burnout similarly to a standing burnout in a vehicle. You’ll want to have two one-pound bags of gender reveal powder that can adhere directly to the back tire of the motorcycle.

This is how to do a burnout on a motorcycle:

  1. Make sure you have the right kind of motorcycle. It needs to have a fairly fat back tire and very strong front brakes (to avoid a wheelie).
  2. Stand straddling the bike – do not sit on it.
  3. Start the motorcycle and keep it in neutral for about five minutes, allowing it to warm up. A cold engine can cause it to sputter and move forward.
  4. Pull the clutch all the way in with all four fingers.
  5. Hold the front brake with your middle finger and rev the throttle at the same time.
  6. Put the motorcycle into first gear while keeping the clutch engaged.
  7. Slowly start revving the throttle (to ensure the bike won’t move), then rev it up to the red part of the RPM gauge – about 75% of the way to the very end of the red.
  8. While keeping your feet flat on either side of the motorcycle, lean all of your weight forward onto the handlebars as much as possible. Putting weight on the seat will cause the rear tire to gain traction instead of spinning out.
  9. Immediately let go of the clutch all at once, and the tire should begin spinning. Only spin long enough to bust the gender reveal powder bags and create a dust cloud!
  10. Reengage the clutch and release the throttle to end the burnout. Do not release the brake until the back tire has completely stopped spinning.

Now you know how to do a gender reveal burnout with powder!

How to Use Gender Reveal Powder in the Exhaust

This is actually the easiest and safest method of all for using gender reveal powder. The reason people tend to prefer doing burnouts is that the dust cloud is usually bigger and shoots up into the air instead of straight behind the vehicle.

Furthermore, putting gender reveal powder in your exhaust pipe means you can do this type of reveal with any vehicle – as long as it has an exhaust pipe. It won’t matter if your car, truck, or motorcycle is automatic or manual, front-wheel drive or rear-wheel drive. The powder will still shoot out of the exhaust pipe!

To put the powder in the exhaust pipe, someone who already knows the gender will need to open the packages of powder and funnel it into the exhaust. It doesn’t have to go in very far, and you can put a tissue or lightweight paper towel in the pipe afterward to help conceal the powder until it’s time for the reveal.

Keep in mind that the car will need to already be in place wherever you want to do the reveal because once the car starts, the powder will come out. This method also tends to cause some powder to fall on the ground during insertion, so you’ll want to be able to easily clean up or conceal any colored powder that’s in eyesight to the partygoers.

The angle of your exhaust pipe can make it difficult to put the powder inside, but as long as the pipe is long enough, it’s never really impossible. This video shows one method for inserting powder into an exhaust pipe that points down to the ground:

Once the powder is in the exhaust and you’re ready to do your gender reveal, all you have to do is leave your vehicle in park (I’d lock the parking brake just for good measure), then mash the gas pedal right as you’re starting the car. Voila!

Be sure to use plenty of powder, because the dust cloud from this method doesn’t seem to last as long as the burnout method. Put at least two pounds of powder in the exhaust – three or four if it will safely fit. (Cornstarch powder should not hurt your muffler at all, and can be fully blown out with a drive around the block after the reveal.)

Once all of the colored powder has blown out, the exhaust smoke may just be white or black (if you can see it at all), and you don’t want anyone to miss the important part!

This post may contain affiliate links. If you make a purchase after clicking one, I may receive a small commission at no cost to you.

Where to Buy Gender Reveal Burnout Powder

You don’t need to look any further than Amazon for a burnout gender reveal kit. Multiple brands and sellers offer brightly colored powder in one-pound blackout bags (so no one can see what color is inside!). They typically come in sets of two one-pound bags per order so you can use one for each wheel.

Most of these bags will come with double-sided tape on them so they are easy to stick to tires for a standing burnout. You just peel the sticker covering the tape off and slap it on the tires. Even if you’re doing a rolling burnout, you should remove the sticker so that once the tire does land on the bag, it will stay with the tire and not get flung away before it busts.

If your bags do not have sticker tape on them for some reason, the best gender reveal burnout tape for attaching it to your vehicle would be something strong but not too strong, like Duck Brand packing tape.

Whether you plan on doing a standing burnout, doing a rolling burnout, or stuffing the powder in your exhaust, I recommend buying at least four bags of powder, and 6-8 if you can afford it. A test run is always advisable because this is a big moment for the parents-to-be and their families!

Below are the brands and sellers on Amazon I recommend for getting your gender reveal tire burnout kit.


Once you know whether it’s a boy or a girl, it’s time to settle on a name! Check out our list of 1000 baby girl names or some baby boy names and their meanings (including the worst names you should avoid). And if mom-to-be isn’t already, it’s time to start using a stretch mark cream on her belly!

  • Share
  • Tweet

Why are there colored stripes and dots on tires? - Magazine Behind the wheel

There are many explanations: they say, in this way they indicate the grade of rubber or mark a defective batch, which for some reason went on sale. There is even an opinion that tires without such stripes are guaranteed substandard. All this is fiction.

Stripes are available in different widths, colors and arrangements. But they have one common characteristic. Please note: the strip always goes around the entire circumference of the tire. In this case, the paint never gets into the grooves. What kind of painter is this, who is not too lazy to draw like this “artistically” on each tire?

If a nozzle sprayed paint onto a rotating tire, the strips would fit perfectly. These are not lined up exactly. Does this mean they are applied by hand?

Who paints the stripes on the tires?

The stripes appear during the tire production stage.

7 key principles for choosing summer tires

The assembled tire then enters the curing mold. Outside, it is compressed by sectors on which a knife-like relief is applied. This relief will then form depressions, grooves and slots on the tire, cutting through the colored stripes. Further, under the influence of internal pressure and high temperature, the vulcanization of the tire occurs. And now the finished product is removed from the mold.

On the surface of the tread, colored stripes are cut with sipes. Under the influence of temperature and the displacement of layers of still raw rubber, the strips moved a little to the side. But they are, and they are closed circles.

The second time the strips are ready for storage in the warehouse. The tires are in an upright position, standing in giant rows, while the designations of standard sizes and even tire manufacturers are not visible. Therefore, instead of looking at tread patterns and arguing about their asymmetry or directionality, it is easier for warehouse workers to determine the type of tire with the help of stripes and ship the right ones. However, on some tire models there are no stripes at all.

Some manufacturers use alphanumeric characters that are not as pretty or mysterious. See the symbols in the center of the tread?

What is the use of stripes for the buyer?

Tires are sometimes sold out of order, especially in the markets - that's a fact. I met with a situation when tires produced not only in different weeks, but also in different years were sold as one set. However, it is believed that it is better to install tires from the same batch on the car. This is where tire stripes can come in handy for the third time.

If the stripes on the tires are absolutely identical, this is an indirect sign that the tires are from the same lot.

Color dots

If I change wheels, do I need to balance them every season?

There are also red dots. The myth goes that this is the heaviest part of the tire. In fact, this is the place with the largest radius. A tire is never completely perfect, and some part of the tread is slightly higher than the rest of the tread. An experienced tire fitter will try to reduce total wheel runout by aligning a small radius spot on the rim with this red dot. The task is quite complicated and requires you to first “scroll” the disk separately.

In addition to the stripes on the tire tread, there are colored dots on the sidewall. Each color has its own meaning.

Tire color markings are a kind of cheat sheet for warehouse workers, tire fitters and car owners. The main thing is to be able to read them.

  • Have you heard that obligatory marking of automobile rubber is being introduced in Russia?

Did you like this post? Subscribe and stay up to date!

Driving Zen

Smoked goggles 3M Mod.

2821

Product catalog

Product catalog

Order payment by number

Enter the order number for payment

Description

Safety goggles. Due to the open design, they are well compatible with other personal protective equipment (respirators). The convenient form and ease of a design does glasses almost imperceptible and comfortable at their wearing. They have a special coating against fogging and scratching. Color - smoky.

Characteristics