How much does it cost to replace tire sensors


A Guide about Low Tire Pressure

Spread the love

How much does the tire sensor replacement cost for my car? Many drivers have this same question about their car, as tire pressure sensors will differ depending on the manufacturer. It is very important to know about the tire health of your car as it can be a serious hazard.  

You are on a happy drive to a vacation destination, and suddenly the message ‘Tire Pressure Sensor Fault’ or the low-pressure warning light shows up on the dashboard. Even for experienced drivers, this can be tricky, so it is advised that a technician is the best person to deal with tire sensor replacement.  

Back in the old days, one needed to use a tire gauge to measure tire pressure. But now, monitoring technology is used to ensure the tire pressure values are ideal. In this blog, you can learn more about tire pressure management, how the sensors work, the symptoms, and how to fix them.  

Contents

What is a tire pressure sensor? 

Tire Pressure Monitoring System (TPMS) is in charge of measuring and estimating tire pressure at any moment. The tire pressure sensors are fitted in the tire valve systems, measure the actual values, and communicate with the onboard computer. 

via GIPHY

TPMS can be one of the following, depending on how pressure is measured.  

  • Indirect TPMS: Makes use of wheel speed sensors which are part of the anti-lock braking system. It uses the idea that underinflated tires have less diameter than others. This system measures the tire rotations, and the onboard computer interprets whether the tire is inflated properly or not. If not, the low tire pressure light on the dashboard will become active.  
  • Direct TPMS: As the name suggests, this system uses tire pressure sensors that measure and send the value to the computer. These battery-operated sensors measure each tire’s pressure and send it to a central control unit. Some of these sensors also measure the tire temperature. 

What are the symptoms of low tire pressure? 

You must wonder, ‘How do I know that the tire pressure sensor is faulty?’. Your car may show different symptoms during a drive, but it is important to figure out the specific signs that it is time to get a tire sensor replacement. 

  • Low tire pressure light 
  • Check Engine Light On 
  • Increased tire wear 
  • Poor fuel economy 
  • Uneven driving experience 
  • Poor traction 

What are the causes of a faulty tire pressure sensor? 

The lifetime of a tire pressure sensor depends mainly on how long the batteries will run. In general, the batteries will run for around 5 to 7 years. But the sensor’s life will also depend on how many miles the car was driven. The more the car has been driven, the faster the batteries will drain. 

via GIPHY

Here are a few reasons for a faulty tire pressure sensor: 

  • Service life expired: As you read above, a sensor lasts as long as the battery functions. So, generally, change the sensors when the vehicle covers 80,000 miles or after 5 to 7 years.  
  • Corrosion: Dirt, dust, and other contaminants can corrode the inner part of the valve stem. Wear and tear and corrosion are responsible for faults in both rubber and aluminum tire pressure sensors. 
  • New Tires: Each time you add a new tire to the car, the system has to be reset after adding the wheels.  
  • Weather: The tire pressure sensors will see different values for summer and winter. This is because the air temperature influences the tire pressure. 

How long do tire pressure sensors last? 

As you read above, tire pressure sensors have a different service life, and it will depend on a few other factors. But the average life is between 5 to 10 years. This is because the sensor needs battery power to send signals to the onboard computer. This transmission only occurs when the vehicle is moving; continuous transmission does not occur. 

In most cases, the batteries are incorporated into the sensor. So, replacing them is impossible once they run out of juice. The tire sensor replacement cost will depend on the type of sensor and the labor charges. 

How to solve tire pressure sensor faults? 

When the low-pressure light stays on the dashboard, use a tire pressure gauge to measure the current pressure. After obtaining the value, find the optimal tire pressure from the car’s user manual. If the pressure is less than the ideal value, pump air into the underinflated tire. 

via GIPHY

Once you have done this, check whether the pressure light is still on. You will have to reset the low tire pressure light if it is on. Usually, driving the car for a short distance will automatically reset the light. There are three steps to reset the light: 

  • Turn the key ‘on’ but do not start the car. Press and hold the TPMS reset button until the pressure light blinks three times, then release it. 

Can you keep driving with a tire pressure sensor light? 

No. Unless you want your car tires to explode and leave you stranded in the middle of the road, do not drive if the low tire pressure light is active. If the tire is underinflated or overinflated, there is a chance for the tire to blow out, which is bad for your car and you.  

via GIPHY

Driving long distances with low tire pressure will increase and accelerate the wear and tear on the rubber. Besides, you will not be able to control the car due to complete tire failure.  

How much does it cost to replace a tire pressure sensor? 

As you read earlier, the cost of tire sensor replacement will depend on labor costs. Therefore, it is always the best choice to get help from a technician to replace the sensor, so it fits perfectly. On average, you will have to spend between $30 to $75 for a sensor and around $10 to $35 in labor costs. Thus, the average cost of replacing a tire sensor can cost between $40 and $100.


Here’s more info on top-rated airport parking, the best parking spots in your city, affordable auto insurance, easy auto refinance, and high-quality car washes near you.


 

How Much Does It Cost To Replace Tire Pressure Sensor?

What's In This Guide?

  • How Much Does It Cost To Replace Tire Pressure Sensor
  • What Is A Tire Pressure Sensor?
  • Why Do We Need Tire Pressure Monitoring Sensors?
  • Can I Drive Without A Tire Pressure Monitoring System?
  • How Long Should A Tire Pressure Sensor Last?
  • Is It Possible To Repair A Tire Pressure Sensor?
  • Why Is My Tire Light On But Tires Are Full?
  • Conclusion

How Much Does It Cost To Replace Tire Pressure Sensor

It takes less than one hour to change all four TPMS modules if you take your car to a credible tire shop. This means that the costs of TPMS replacements include a minimal labor fee in addition to the componentry that tends to cost somewhere in the neighborhood of $30-$50.

Added up, it should cost you between $70-$150 per wheel. Granted, this also depends on the make and model year of your vehicle and the availability of parts. You may be able to replace a single sensor, but if the remaining three sensors are more than 10 years old, you should replace them all at once.

What Is A Tire Pressure Sensor?

A TPMS (Tire pressure sensor) is an intricate piece of engineering designed to constantly monitor the air pressure within the tire. Most tire pressure monitoring sensors are designed to detect when the tire air pressure falls below a certain threshold and then alert the driver via a dashboard warning light.

These sensors are placed inside the tire and are commonly being powered by a small battery. Back in 2000, the US government made the use of TPMS a legal requirement for all cars sold past the year 2000. This means that all cars nowadays come with tire pressure monitoring sensors as they are an essential aspect of on-road safety.

Why Do We Need Tire Pressure Monitoring Sensors?

Poorly inflated tires are unable to properly support a car’s weight, they increase your braking distances and make the car less maneuvrable, especially at high speeds. According to a prominent TPMS manufacturer Schrader, more than a quarter of a million accidents are being caused by under-inflated tires each year.

Back in the early 2000s, NHTSA stated that tire-inflation-related issues cause more than 10,000 injuries each year, so it’s rather obvious why we need functioning tire pressure monitoring sensors. These sensors tirelessly monitor the air pressure within the tire while also communicating with the car’s ECU through low-frequency radio waves.

Whenever the system deems the air pressure is way too low, you will be alerted which means that you will either adjust your driving style accordingly or completely pull over. These sensors also ensure that you always use the correct amount of fuel because under-inflated tires also use more fuel due to increased levels of tire rolling resistance.

Can I Drive Without A Tire Pressure Monitoring System?

Driving without a tire pressure monitoring system is certainly a risky thing to do, especially if you often drive at higher speeds. As these sensors tend to wear out, they need to be replaced in due time. However, most people out there use their cars for daily driving purposes and it’s not always easy to cancel everything and take your car in for a service.

If you are in a pinch, you can drive the car even without a tire pressure monitoring sensor. However, always keep a sentient eye on your tires and be sure to adjust your driving style accordingly. If you are positive that your tires are properly inflated, you may be able to drive the car and nothing should ever come of it.

Nonetheless, if you are not in a hurry and you can take your car in for a TPMS replacement, be sure to do so at your earliest convenience. While driving without a tire pressure monitoring sensor, be sure to read this article if you want to find out how you can tell if your tires are too low while behind the wheel.

How Long Should A Tire Pressure Sensor Last?

Most TPMS’s tend to last about 5-10 years, but given the fact that they are not the easiest nor the cheapest components to replace, most people tend to swap them whenever it’s necessary. This means that they tend to replace them only when the battery dies or when other TPMS components fail.

Is It Possible To Repair A Tire Pressure Sensor?

A TPMS fix is only possible if the reason why it failed in the first place can be resolved without needing to replace the whole unit. There were instances where owners complained about their brand-new tire pressure monitoring sensors failing only after a year or two of use.

A common reason why is if the sensor was damaged beforehand, it used a faulty battery, or because it came with a manufacturing defect. Sometimes a brand new battery can replenish your old sensor and give it a brand new life, but you should not use the same sensor for more than 10 years max.

Why Is My Tire Light On But Tires Are Full?

This can be caused by either a faulty sensor, a slow puncture, swift ambient temperature shifts, recent tire replacement, or because your wheel speed sensors are malfunctioning. These sensors are not designed to last a long time and the reality of it is that you are eventually going to experience some form of issues with them.

If your tire pressure monitoring sensor light stays on, but you are 100% positive that your tires are absolutely fine, the best thing you can do is to replace the sensor. Indeed, you can also repair it in some instances, but the price differences between repairing them and replacing them are marginal, so it’s always better to just get a brand new one.

Conclusion

Most tire shops out there are going to charge you anywhere between $70 to $150 for a TPMS replacement per single wheel. This is because the components such as batteries, sensors housings, and chips tend to cost somewhere around $30-50 while the labor costs can cost up to $100.

It also depends on which type of car you are driving, the type of TPMS, and the availability of parts. If your sensors are already more than 10 years old, it’s always better to replace them all rather than one by one, even if the remaining three are not showing any signs of old age.

Installation of pressure sensors in Kaliningrad

Home / Service / Installation of pressure sensors

Professional pressure transducer installation services

Prices

Sign up

Prices

Sign up

Installation of pressure sensors is carried out in Kaliningrad by specialists from the Shindorado tire center. Vehicle handling and fuel consumption are directly related to tire pressure. Modern tubeless tubes and rims create a closed space for air. Any slit that occurs at the junction of the tire and rim leads to air leakage and a decrease in pressure in the wheel. Another source of air leakage is the spool. You can install the control device yourself. But the specialists of "Shindorado" will install the sensor for monitoring tire pressure quickly, efficiently and at a low price. Find out the cost of the service from our price list or by phone: +7 (4012) 505 -120.

In the auto center "Shindorado" masters install external (but rarely) and internal special sensors to check the pressure and temperature of the air in tires. The readings are transmitted to the indicators on the side panel. When there is a critical change in readings, an alarm sounds. Clients of "Shindorado" were convinced that the installation of monitoring devices in the tires prevents wear of tires, body, reduces the consumption of gasoline or gas.

Our auto center provides car owners with unique services for the selection, installation and programming of pressure sensors in car tires.
The main advantages of using such devices:

  • pressure and temperature controlled;
  • increases the "life" of rubber;
  • tires wear out less by 30%;
  • reduced fuel consumption;
  • ensures the safety of the car at any speed.

Shindorado tire service offers a wide range of tire pressure sensors and repair kits. Experts advise on the methods of binding devices to your car and provide technical support during the life of the vehicle. All works of the master are performed on professional equipment. Contact Shindorado if you have problems with the tire pressure sensor:

  • Stopped working, battery needs to be replaced.
  • Broke while mounting/removing tires.
  • It is required to register the tire pressure monitoring system.
  • A defective device needs to be replaced.
  • The sensor needs to be restored.

For the convenience of customers, payment for the service is carried out in cash or non-cash payment. The cost is indicated without taking into account the work of removing / installing the wheel, mounting / dismounting the tire and final balancing. Need help or advice on tire fitting or other related services? Write to the online chat or call our operator by phone: +7 (4012) 505-120

Service

Price

Service for installing pressure sensors on the wheel R12-14

165 rub.

Service for installing pressure sensors on the wheel R15

165 р.

Service for installing pressure sensors on the wheel R16

165 р.

Service for installing pressure sensors on the wheel R17

165 р.

Enroll

Tire pressure sensors, TPMS sensors. Installation, cloning and configuration in Moscow

from 2250₽
from 3200₽

You can buy TPMS sensors from us for any car.

Both original and universal analogues of the sensors are available, which with a 99% probability will fit your car and will work as well as an original spare part.

In our store, the cost of tire pressure sensors is much cheaper than original TPMS kits.

Sensor Catalog

+7 (495) 790-11-24

Top 8 Best TPMS Sensors in 2021 Review | Professional Opinion

Most modern cars have built-in TPMS sensors, but there are some that don't. If your vehicle does not have a built-in tire pressure monitoring system (TPMS) sensor, you have nothing to worry about. It is still possible to buy a TPMS sensor to keep your car's tires from being compromised while driving. These are systems that are designed to detect low tire pressure in your vehicle and alert you immediately. Thus, they guarantee your safety on the roads.

Not only will you save your life, but you will also save on towing and repair costs. Finding a quality TPMS sensor can be a daunting task, especially if you are buying one for the first time. You need to make sure you choose one that is compatible with your vehicle's wheels and ECU. In this article, we have reviewed 8 of the best TPMS sensors available on the market. Here's a quick guide before continuing.

Best TPMS Sensors List in 2021

#8. Autel MX-Sensor TPMS

Manufacturer: Autel

We start this review with the Autel TPMS sensor, which comes in a set of four. It will work just as well as the OEM and it's possible at a minimal cost. In addition to the affordable price, it is very easy to use. It also promises to last a long time, which means you'll save on frequent repairs to your car.

Programming and setting up the device is another thing you will appreciate about this device. It is powered by a battery with a 5 year lifespan. You also need to have enough confidence to buy as the manufacturer offers a 2 year warranty. The price of this essential is relatively high, but you will definitely get value for money.

Sensor Features:
- This is a system that is very easy to install and program.
- Comes with a 2 year manufacturer's warranty.
- Rugged and durable construction with 5 years of battery life.
- This is an economical and easy to use system for cars.

No. 7. Launch RF TPMS, original equipment replacement

Launch

Tire Pressure Sensors Manufacturer: Launch

This is a set of four sensors designed to monitor your vehicle's tires. The device comes pre-programmed, don't forget that its installation is very simple. The battery of this device is of good quality, it will last for 6 years. In addition to monitoring car tire inflation, the sensor also sends temperature information like factory sensors.

This is a device that works so well that it doesn't take long to install. It is also pre-programmed which means it will be ready to use right out of the box. The manufacturer provides a 2-year warranty on this product to cover any manufacturing defects. Again, there is a money back guarantee in case of dissatisfaction.

Sensor Features:
– Battery life 5 to 6 years.
- Easy installation and reset of iDrive.
– 80% customer satisfaction guarantee.
- TPMS comes with a 2 year warranty.

No. 6. Tire Pressure Monitoring System Sensor ORO-Tek

Manufacturer: ORO-Tek

This sensor works in the same way as the original equipment sensor. You will never have to worry about your limited budget as this one comes at a very affordable price. Another unique feature of this sensor is that it does not require programming. What you will need to do is use the OEM relearn procedure.

Its two-piece stem design makes maintenance easy. This is because it becomes very easy to replace the stem regardless of the electronics. Four sensors are required for best performance. Oro-Tek is a brand that offers unparalleled products and the educational resources you need to deliver a high level of customer satisfaction.

Sensor Features:
- Designed to match the original equipment sensor.
- This TPMS sensor does not require programming.
- 35 degree adjustable stem.
- Uses the OEM relearn option.

No. 5. Tire Pressure Monitoring System Sensor Schrader

Manufacturer: Schrader

On average, there are 59 million vehicles equipped with TPMS sensors in Russia. Approximately 19 million vehicles enter the market every year, increasing the demand for these sensors. You need to purchase a sensor that does not use dead batteries or electronics as these can compromise your safety. To this end, Schrader offers direct mount TPMS sensors.

This is a brand that has managed to integrate more than 200 million sensors into the world's automotive platforms since the launch of TPMS in 1997. You will appreciate the universal compatibility of this sensor as it is used in most car models. Since this is a sensor from a well-known brand at an affordable price, you have every reason to buy.

Sensor Features:
is the world leader in TPMS design and technology.
- Patented Schrader technology built into every OEM sensor.
- More than 200 million sensors are in operation worldwide.
- Offers a direct OEM sensor replacement.

No. 4. TPMS Sensor VDO 433.92 MHz

Manufacturer: VDO

If you are looking for a sensor that will not hinder your work while still providing maximum coverage, this is a very good choice. It is not only versatile, but also reliable for any trip. The gauge has a strong clamping rod that helps expand your vehicle's wheel armature. Since you are made by a famous German brand, you will have every reason to buy this system.

This sensor comes pre-programmed and designed to follow the re-learning procedures for all vehicles. You will also have a very easy time when it comes to installation. REDI-Sensor is going to replace many original sensors, including latching sensors. The best thing about this sensor is that it comes at a very affordable price despite its outstanding performance.

Sensor features:
- Includes all parts for easy installation.
- Robust swivel stem design with clamp.
- This sensor is approved by the original manufacturer.
- Sensor is pre-programmed to perform OE relearn procedures.

No. 3. VDO REDI-Sensor

Manufacturer: VDO

In fifth place, according to our research, is another sensor from a well-known brand. When buying, you must be sure of yourself, because this sensor has a great track record. It comes in a set of two and comes with installation instructions to ensure a hassle-free installation. You will also appreciate the fact that no programming is required for this sensor.

In addition to being manufactured by renowned manufacturers, this sensor performs flawlessly just like the original equipment. The price for it is relatively affordable so that everyone can afford it, regardless of their budget.

Sensor Features:
- Sensors are supplied as a set of two.
- No programming required.
- Works just like the original equipment.
- Comes with installation instructions to ensure easy installation.

#2. Tire pressure monitoring sensor Denso

Manufacturer: Denso

If you want to be sure that your safety on the road will not be compromised, this is the sensor you need. The advantage of this device is that it is ideal for most car models. It is powered by polymer batteries that have been proven to last for a very long time. You will love installing this device in your car.

You have nothing to worry about even if you are shopping on a very limited budget. This is because this device comes at a very affordable price to ensure it fits all budgets. The fact that it comes from well-known manufacturers gives you the confidence to buy.

Sensor Features:
- Clamp Mount Design.
- Powered by a lithium polymer battery.
- This is a great OEM replacement.
- Ideal for most car models.

#1. ACDelco - Tire Pressure Monitoring System Sensor

Manufacturer: ACDelco

Finally, we have the ACDelco TPMS sensor, which is battery operated. It will help you check your car's tire pressure and alert you when it's 25% below the recommended level. Using radio frequency, this sensor will flawlessly send pressure data to the on-board computer in the vehicle. The battery is good because it will last you up to 8 years.

However, you should know that this unit will work well for General Motors vehicles. Therefore, it is not recommended for some other manufacturers. However, this sensor works flawlessly and is easy to install as advertised. So, if you want to stay safe on the road with the right tire inflation, this is the one you should choose.

Sensor Features:
- Offers quality, reliability and durability.
– Increases vehicle safety.
- Batteries last up to ten years.
- Designed for flawless communication with the GM TPMS module.

TPMS sensor buying guide which will work on a wide range of cars regardless of make or model.You will get some TPMS sensors that will not work on Japanese cars.To get good value for money, the sensor you choose should work on all car models.

- Ease of use: As with any tool you buy, it's good to pick one that's easy to use. You need to get a TPMS sensor that will serve you, not you. If you find yourself always consulting the Internet on how to use the sensor, you can be sure that this will give you difficulties.

- Reliability: It is always recommended to choose TPMS sensors from reputable brands. This ensures that you can get a timely response if you get stuck somewhere. You also need to check if the manufacturer has given a warranty for the tool you are going to purchase. This inspires confidence that the instrument is of good quality.


Learn more