Okay, I know this sounds very creepy, to say the least, but when you think of how pissed off some persons can make you get, then you will come to know that giving them a flat tire should be the least mayhem that should befall them.
Disclaimer: Before I go into any further detail on how to inflict damage to an enemy’s tire, kindly note that you are personally responsible for any trouble that might arise as a result of this action you are about to carry out. Also, note that this website will not be held accountable in any way possible for your actions as a result of the content shared on this website. I was responsible for my actions, and so should you. (Read Also:Can You Use Jack Stands On Pinch Welds?)
Having said all that, I will be telling you the story behind my first deflating escapade in the steps below.
Table Of Contents
In my own case, I felt the reason was more than justifiable due to the event that leads up to this act.
My neighbor had a very annoying habit of bringing home hookers every night, I mean every damn night! If bringing home hookers was the problem, then there wouldn’t have been a problem at all, but rather he would hold a mini-party before they got down to their real business (if you know what I mean).
Read Also: How To Catch Someone Putting Nails In Your Tire
I tried explaining to him that I worked remotely most times and that I did most of my work when people are asleep because of the peace and tranquility the night brings, but it all fell on deaf ears. Their business (if you know what I mean) was very loud, and it lasted deep into the night. The only thought I could conjure then was to restrict his movement anytime he was about to go out, and what better way to go than to deflate them wheels!
Step 2: You Must Have Courage As Your Back UpCarrying this out was no small feat I tell you. Lots of items needed to be checked, but at the top of my list was courage.
Could I really carry this out? After giving it a lot of thought, I felt I had to, at least for the sake of my sanity. My workload load was piling up, and since my neighbor wasn’t given to reason, I felt I had to go ahead with my plans.(Read Also: Can I Use Tire Foam To Clean Engine?)
If you don’t have the courage to back you up on your set out plan, you might as well just forget about the whole idea, this is because you need to get every aspect spot-on.
Step 3: Get A Box Of 3-Inch NailsThe next thing I did was to get a box of 3-inch nails, I aligned some of them just underneath the front tires, and then I went inside. I only wanted to cause minimal damage so I placed them at just one of the tires, and as you are about to find out, it turned out I made the right decision. (Read Also: How Long Does A Nail Have To Be To Puncture A Tire?)
Step 4: Wait For The Outcome Of Your Evil DeedsThen came that part of the night when my neighbour was to go on his usual whore shopping, I peeped at my window and watched as he carelessly hopped into his car, and all of a sudden, I heard a loud pop! Sound.
My neighbour got down from his truck and started cursing. He looked round to see if he could catch the miscreant who punctured his tired, but there I was, peeping from the side of my window.
As it turned out to be, my neighbour ordered an Uber ride, which would have made all my effort in vain, but alas he didn’t return until the next morning. I had the night to myself, it was peaceful and devoid of any form of noise, but my heart was not at peace.
Read Also: How To Prove Someone Slashed Your Tires
It then occurred to me that I had been a tad selfish about the whole thing, and didn’t even think of the cost it would have on his purse. To maintain a clear conscience, I needed for my task, I concluded within myself that I would man-up to him the following day and set the record straight.
Step 6: Make AmendsWhen he walked into his apartment, I took a little time of my own to rehearse what I was going to say to him, and there I was, sweating profusely as I tried to bring myself to knock on his door.
When I finally did, he came out and we exchanged the normal pleasantries.
I tried explaining the events of the night before whilst leaving the part where I was sorely responsible for the disaster I brought on his truck tires.(Read Also: Can Tire Pressure Sensors Leak Air?Find Out Now)
I really can’t remember the exact details of the whole conversation we had, but at the end of the short conversation we had, I did let him know how peaceful my night was in his absence and we laughed over it. I offered to pay for the damage, but he declined and said he would take care of it himself.
That answer wasn’t enough for me, so I decided to drop a $200 bill in the spot where he drops his house keys, at least to clear every form of guilt I might have on my conscience.
After that ordeal, I got to discover that there are safer ways of puncturing a tire without having to destroy the tube. However, except you have lots of time on your hands, you shouldn’t consider this procedure.
Unscrew or remove the screw from the needle inside the valve stem. If you are familiar with car tires, this shouldn’t be a problem for you.
Step 2Cut off the valve stem. You can also choose to remove the stem cover and press the needle-looking core that will be exposed when you remove the stem cover, but you should note that this process will generate a lot of noise due to the air expelling from the tube, and since you wouldn’t want to be noticed, it wouldn’t be a good idea.
Once again, do note that this act is a criminal offence, and is likely to attract legal action. Learn to follow the line of peace as much as you can. No peace or satisfaction comes from carrying out evil on another man.(Read Also: Can Bike Tires Pop?Find Out Now)
Can You Pop A Tire With A Knife?Yes, you can, but before you carry out such a deed, you should note that it makes a loud sound, so if keeping your deed, a secret, then I suggest you seek another option.
You should also know that most states do not allow patches on tires, and as such, you will be sending your prey to amazon to shop for new tires after the deed might have been done. Do well to think twice before carrying out this stunt.
One last thing, you also stand a very high risk of injuring yourself in the process. Puncturing a tire is not as easy as it sounds, and except you have a very strong Swiss blade, don’t even think of the idea.
So What Kind Of Knife Will Cut A Tire?Just like I stated in the FAQ above, you will require a very strong Swiss knife to carry out this act. Using your conventional kitchen knife can break in the process of making the puncture, then injuring you in the process. You really don’t have to take that risk, do you?
Can I Go To Jail If I Get Caught Slashing A Tire?Hmmm… I actually thought of this possibility before I carried out this act, and you should too.
You are unlikely to go to jail as the act you’re about to commit is called vandalism. However, there is a huge possibility that you would be arrested and that on its own is a stain on your record especially if you didn’t have any.
It also wouldn’t matter if you succeed or not in the act, but the fact will remain that once you get caught in the process, there is a huge chance that you will be arrested.
You should also note that if the tires are worth close to $500, then you might be going to jail for up to 90 days and might also be required to pay a fine of $250. So you might want to think twice before carrying out such an act.
Will Slashing The Tires Set Off The Car’s Alarm?I actually didn’t consider this factor, but you should. The alarm of my neighbour’s car didn’t go off, and from the research, I have made, it is highly unlikely that a car’s alarm will go off as a result of your actions.
This is because most alarms would have to possess a sensitive tilt sensor for it to go off.
Some alarm wouldn’t even go off if you kicked at it really hard with your foot. So as long as the car is stable all through the process, you are unlikely to set off the alarm. (Read Also: Can My Tire Fall Off With A Bad Wheel Bearing?Find Out Now)
Common don’t be mean. I don’t know what that fella has done to you, but all four tires? Common! Well, if you still want to go ahead and slash all four tires of your victim, you should know that the terms of your victim’s insurance policy are likely to come into play if all four tires are slashed. So you might actually be doing your victim a long-term favor by gunning for all four of his/her tires.(Read Also:Does Tire Sealant Expire?)
Apart From knife And Nails, What Else Can Puncture Tires?Several factors come into play when it comes to having a flat tire, and some of them include the following;
1. Damaged Valve StemValve stem issues are another regular reason for tire issues.
The valve stem is the minuscule bulge from your tire that you unscrew when you have to put air in it. A spoilt or eroded valve stem can make air spill out of the tire, causing it to go flat. Free or dirt-obstructed stems can likewise make tires lose air.
In some cases, air will spill from the tire dot, which is the edge of the tire that lays on the rim. This leakage can make the tire flat after some time. To check if there is an issue with the tire bead, spray your wheel framework with foamy water. If a constant flow of small air pockets or bubbles arises, you most likely have a tire bead leak.
3. Separation Of Tire And Rim Caused By CollisionThis separation typically happens when your tire hits a curb or when you rub the wheel strongly against the walkway while stopping or parking. The tire slips somewhat from the rim, causing a moderate loss of air over the long run. This is by and large not something you can fix all alone, but rather seek the services of a mechanic without any problem, at a little cost to your purse.
Vehicle owners with aluminium wheels are urged to consistently check their tire pressure. If the leakage continues, carry your vehicle to a mechanic for an expert fix.
5. Unexpected EventualitiesAt times it’s absolutely impossible to forestall a punctured tire. Learn to drive securely and cautiously, and follow the appropriate methodology. If you experience a startling block on the road: don’t pummel on the brakes, allow the vehicle to naturally come to a stop while steering to the roadside, turn on your risk lights, and don’t endeavor to change the tire yourself except if you are a few feet away from moving traffic. (Read Also:Can You Jack Up A Truck By The Leaf Springs?)
Conclusion – How To Give Someone A Flat Tire Without Them KnowingIs it really worth it? Is it an act you will look back and be proud of? In my own honest opinion, I strongly feel that you can easily overlook whatever grievance you might have towards your target and learn to move on.
The world would be a better place if we learn to overlook faults.
One more question, I hope you will feel cool if someone else slashed your own tires, give it a thought, will you?
Okay, this might sound creepy but think about how angry some people can make you. They deserve it! If someone really ticks me off and I want to get revenge on them, then giving their car a flat tire would be the least horrible thing that happens to them.
Before going into detail about inflicting damage onto an enemy’s tire please note that any trouble arising out of carrying out such actions is your individual responsibility alone.
I know what you’re thinking. You’ll never be able to get away with it, right? And who in their right mind would even consider such an adventure? In my defense, I was young and dumb enough not only to think about deflating a car tire but actually go through with the action itself when given the opportunity.
My friends kept telling me how awesome driving around on underinflated tires sounded because of all that extra traction they provided (and also increased fuel economy). The way I saw it at 18 years old is if some guys were having fun doing something like this then so could we!
Table of Contents
So one night after hanging out together as usual our group ended up walking back towards town by ourselves down Main Street.
Everyone’s been the victim of a flat tire at some point in their lives, but have you ever considered how much more difficult it might be for someone who is living on the streets? In this blog post we’re going to explore why giving an individual a flat tire could really make their life a little bit easier.
Since there are so many people out there that don’t know what they’re doing when it comes to fixing tires, I want to offer up my two cents worth of advice.
If you find yourself with a spare and an air pump in your car then go ahead and take off one of your own tires. This way if someone needs help with theirs all they’ll need to do is to swap out the old for the new and they’ll be on their way.
If you’re really rustling your jimmies then take the time to do it right by putting a screw in the inner middle part of the wheel so that it can’t be unscrewed. While this will make doing tires all but impossible, at least you get to keep yourself entertained imagining how much fun this person is going to have to try to figure out how to drive around with the screw.
Not only that, it could become a pretty expensive lesson in not only messing with someone’s car but also making them pay for the damage you caused.
Getting this plan right was no easy task. There were many details to consider, but the need for courage stood out above all else. Was I really up for it? After much consideration, I felt that yes – at least in order to preserve my sanity! My workload had piled high and since reason wasn’t an option with our neighbor nearby, we decided on carrying out the plans.
If you don’t have the courage to back up your set-out plan, then forget about it altogether. It’s crucial that every aspect be perfect because without a strong resolve behind what you’re doing, getting anything right will just seem impossible.
I decided to get a box of 3-inch nails and place them just underneath the front tires. I didn’t want to cause too much damage so I only put some at one tire. As you’re about to discover, that was the right decision because as soon as they saw me come inside, someone began screaming not knowing what happened outside.
I was peeping through my window, watching as he carelessly hopped into his car. Then I heard a loud pop! He got down from the truck and started cursing. For a moment there, I thought he saw me but to avoid any confrontation with him.
I went out to my balcony once again hoping that it would not happen for another time when I’m out of sight or have shifted myself under covers in bed trying hard not to make even the slightest noise.
Then no one could realize what’s going on outside our apartment block at such odd hours of the night.
Only cops are supposed to be prowling around this area looking after residents’ security making sure all is safe before they go home too tired themselves because it had been an eventful day for the city.
As it turned out to be, my neighbor ordered an Uber ride which would have made all of my effort voids. I had the night to myself; however, this was not peaceful and devoid of noise but with a heart at unrest.
I then realized that I had been selfish about everything without considering how much money he spent on me as well. To maintain clear conscience for what is right in life, even though difficult sometimes–but being honest always works best–the next morning came quick enough!
I walk into my apartment a little anxious. I have to tell Michael what happened the night before on our date, but how? Sweat slowly drips down my forehead as I gather myself and knock on his door.
He answers with an enthusiastic
“Hey!”
We exchange pleasantries for about two minutes then it’s go time! In all honesty, though he was so understanding of why things went wrong between us last night that we actually laughed together at one point in the conversation.
It felt great to not be held accountable just because other people thought they knew me better than anyone else did (I say this from experience).
I was nervous to see him, so I took a few minutes before knocking on his door. The sweat dripping down my face probably made me look like some sort of crazy person standing outside in the heat for too long!
When he finally opened it, we exchanged pleasantries and talked about what happened last night while carefully avoiding talking about how that stupid raccoon ruined our dinner plans by chewing through all those tires.
Yes, you can. It is quite easy to do. With a little force, a sharp knife can easily pop a tire.
Before you go into your car and rip the patch off of someone’s tire, I suggest that you think about it.
For one thing, this makes a loud noise so if no other people are around then they might not even realize what is happening to their tires in time for them to get help from others or change out the damaged tires themselves quickly enough without any assistance.
Plus many states such as California have laws against tampering with vehicle equipment like changing its contents which currently includes patches on tires according to section 24600-24608 of the Vehicle Code (CA). Lastly please note that most online retailers will refuse returns after items have been used.
Any knife that has an edge will do. If you have a dull kitchen knife with a pointy edge that may puncture a tomato, you have a knife that will cut a tire. A Swiss Army Knife will cut a tire. A “shive” made from a hard object will cut a tire.
A tire is just rubber.
It does have some steel braiding inside that gives it strength. But this strength is meant for dull impacts, hitting curbs or potholes in the road. If you run most knives edges along a tire, the tire will split.
Go to the junkyard and bring a butter knife. You will be able to cut a hole in a tire with even a butter knife! It will take more strength though. Now imagine using a sharp steak knife or a butcher’s knife. You will easily cut a nice-sized hole in any tire.
Tire deflation is very serious and potentially dangerous art. Now that you’re an expert in the field, what will your next move be? Maybe to play a practical joke on someone with this newfound power or maybe even use it for good by deflating overconfident guys at work who peaked high school but are still acting like they’re cool.
Yes, tire deflation can have some seriously powerful effects! So now that you’ve become an authority in this area (after reading our article of course), which path do want to take: using it as a practical joke against one’s significant other or perhaps taking down those ridiculously arrogant dudes from high school whose crowns were too big anyway?
Car vandalism is not a good idea because once the police catch you in that act, there’s a high chance they will arrest you and throw your ass behind bars.
If for instance tires worth $500 were punctured then it would be considered grand theft which carries up to 90 days of jail time along with fines of around $250! Don’t get caught doing such dumb things like this.
Yes. Cutting tires may set off an alarm. Some car alarms are sensitive and they include sensors that are located near the tires. You will have to hit the tires with a sharp knife and that may be enough to set the alarm off.
But you can check the alarm’s sensitivity with a slight kick to the tires. If there is no noise a stronger kick would do. Still nothing? Then let the air out should result in the same event happening.
If you don’t want your victim to have any tires, know that their insurance policy might come into play. If all four of the vehicle’s tires are slashed, this could cause lasting issues for them so be aware!
If you’re going to slash all four tires of your victim, at least know that the terms of their insurance policy will come into play.
So really slashing them might be doing a favor in the long run for him/her!
Tires may lose air due to a faulty valve stem. A worn-down or corroded valve might create leakage as it is the minuscule bulge sticking out of your tire that you unscrew when adding in more air. It can also be caused by free-flowing dirt on and around the stem, which makes it hard for tires to hold its contents inside.
The tire bead is a piece of rubber around the edge of your wheel that acts as an airtight seal. If this seal isn’t perfect, you’ll lose some air over time and have to frequently re-inflate or replace it entirely.
This separation typically happens when your tire hits a curb, rubs against the ground while stopping/parking, or goes through any other process where there’s too much friction between two surfaces (e.g., rubbing).
This separation typically happens when your tire hits a curb or rubs the wheel against the sidewalk while stopping or parking.
Over time, this causes moderate air loss and you may need to get it fixed by a mechanic at some cost.
When your tire hits a curb or rubs against the walkway while stopping, you lose air over time. You should visit professionals to fix this problem; it’s not something that can be fixed alone!
It’s not always possible to prevent having a flat tire. When this happens, drive safely and cautiously while following the appropriate steps: turn on your hazard lights, don’t brake too hard; slowly come to a stop in an open space with no traffic around you.
If you have aluminum alloy wheels, it is important that you check your tire pressure regularly. If the leakage continues, take your car to a mechanic for an expert fix.
If the problem is not fixed, tire pressure will continue dropping until they explode which can be dangerous and costly for owners as well as other motorists on the road.
Everyone’s been the victim of a flat tire at some point in their lives, but have you ever considered how much more difficult it might be for someone who is living on the streets?
All it takes is a sharp object (screwdriver) and some patience.
It’s not hard to do, but be careful when doing so! Puncture the tire with a needle or pin and then inflate it so that only small air bubbles show through the hole. If they see any large bubbles, they’ll know something’s wrong.
Use an ice pick or sharp nail and poke one of the beads on either side of the valve stem near where it meets up with its rim, but don’t pierce all the way through. This will slowly deflate their tire while they drive around without them noticing anything out of place.
Look for a puncture with soap
A puncture, a shoulder or side cut - experienced tire workers will detect such problematic moments quite quickly, without even removing the wheel from the car. Another thing is hidden defects, for the detection of which it will be necessary to resort to a number of tricks.
What will the pros do? First, he pumps the problem wheel to 1.5 - 2 atmospheres and tries to determine the place of the puncture or cut by ear - it is very likely that the tire will emit a characteristic whistle at the place of the defect.
If this tactic does not help, we turn to water procedures with soap. First, we will try to identify a puncture with little blood - we take a soapy solution and pour it over the tire.
If we are talking about the front wheel, you can not even dismantle it, but jack up the car and turn it slowly, spraying the rubber with soapy water. Our goal is to notice the appearance of foam and bubbles on the tire. Sometimes the problem area helps to identify the blurring and simultaneous pumping of the tire with a pump. The puncture did not give itself away again? You can try to remove the wheel and lower it entirely into a container of water, pressing on the sidewalls and again looking for bubbles.
Look for a hidden defect from the inside
However, it happens that it is not possible to find the place of damage during the water-soap procedures. There may be several reasons. For example, a tire can be etched with air due to a very small wire, needle or stud that is not visible to the naked eye, but which can still be felt.
To do this, you will have to disassemble the wheel, arm yourself with a rag or napkin and run it along the inner area of the tire. It is very likely that the fabric will catch on this inconspicuous sharp object.
Sometimes air bleeding can also cause internal damage to the cord, which happens due to careless driving on broken roads. It even happens that on a "spike" when driving through pits, the heel of a spike (mostly hand-made) pierces the tire from the inside. Be that as it may, if you find a sharp object sticking out from inside the tire, look at the situation. If the matter is in a small carnation or a needle, we repair it. If damage to the cord is detected, as well as a hernia, it is recommended to replace the tire - further operation is unsafe.
Micro cracks
Sometimes a problematic spot in a tire cannot be identified either with a foam solution or by feeling the inner surface of the tire. In this case, pay attention to the condition of the sidewalls.
If the tire is old or the owner practices parking close to the curbs, and also stores the wheels on the balcony under the scorching sun, microcracks may form on the sidewalls.
Through them, moisture enters the cord, which is fraught with deformation of the entire frame. Unfortunately, cracks, like hernias, are not repairable. Therefore, if the recesses are small, no more than 1-2 mm deep, we put such wheels on the rear axle and drive for some time exclusively in the city (not at high speeds). Or, as an option, you can contact the tire shop, where such defects will be eliminated on a special machine by melting rubber. But the office most likely will not give guarantees for such work. If the cracks are larger than 2 mm, we already definitely throw out such a wheel and put a new one.
See nipple
It is quite common for a tire to deflate also because of a defective nipple. They can break here as metal structural elements (you can verify this by simply moistening the surface of the nipple with saliva and tracking air bubbles).
In this case, to solve the problem, it is enough to turn the metal spool clockwise.
You can also replace the spool, since the process is not difficult, although it requires skill. We unscrew the old spool and immediately install a new one in its place, and we do it quickly, overcoming the pressure of the outgoing air.
It also happens that air escapes from the rubberized nipple valve. From operation, it can be erased and this will reduce the density of its mating with a metal tube. In this case, again, the road is for you - in tire fitting. There, the wheel is disassembled, the damaged nipple is pulled out with pliers and a new one is installed.
See rim
Finally, it is not uncommon for tires to be flattened due to deformation of the rims. The process may well start the careless passage of large pits, when the suspension reacts to the rebound, the tire is crushed, and the disc rim beats against unevenness. It is quite possible to eliminate wrinkling of the surface of the discs at the same tire fitting.
The cast wheel is rolled on a special machine, and the forged wheel is restored using a special press and rolling. Difficulties arise except with the repair of the most hard forged wheels.
Here, heating will most likely be required to repair the damage, since it is most likely impossible to roll the discs using the machine alone. And it also happens that rust eats up the inner edge of the rim (most often stamped wheels), and the air escapes through the gaps formed. The solution to the problem is obvious - the wheel is disassembled, problem areas on the disk are cleaned and primed.
A self-tapping screw or a sharp stone lying on the road can cause a lot of trouble for the driver. After reading this article, you will have a ready-made sequence of actions to take if you have a flat tire.
If for an experienced driver a wheel puncture is just a small nuisance that takes half an hour to set up a spare tire, then a novice, faced with a similar problem for the first time, will definitely be confused.
Indeed, many questions will immediately arise in his head: “what to do now?”, “How to replace the wheel on your own?” and “can I get to the car service on a flat tire?”. Therefore, we will deal with the situation in order.
Tires with and without tubes
There can be many reasons for a flat tire. If you have a chamber wheel (that is, a chamber is inserted into the tire, which was actually inflated), then it is rather unfortunate to run into a sharp object, and the tire will go down in a matter of minutes. Imagine if this happens at speed... That's why most automakers fit their cars with safer tubeless tires. Drivers drive such cars for months with a screw in the wheel and do not notice it.
The fact is that inside tubeless tires there is no separate chamber, and the pressure is kept due to the tight fit of the tire beads to the disk. In the event of a puncture, a tubeless wheel will bleed air much more slowly. Of course, if the self-tapping screw (or something else) remains at the puncture site.
A special viscous solution is applied inside the tubeless tire, which is glued to the self-tapping screw, “closing the hole”, and does not allow air to leave the wheel.
Four causes of "baiting" of air in the wheel
There are many reasons for letting air out of a tubeless tire. This is not only a puncture or breakage of the spool (this is a valve located in the nipple that regulates the passage of air during inflation), as is the case with a chambered wheel, but also a side cut or peeling of the tire from the disk.
1. Tread puncture
Perhaps the most common cause of a flat tire is a puncture. Nails, pieces of wire or other metal objects, unfortunately, are far from rare "guests" on the roads. What can we say about the sharp pebbles found here and there on a country road ...
In most cases, metal objects get stuck in the tread. And this is good! Firstly, the self-tapping screw is not difficult to notice, thereby establishing the puncture site.
Definitely harder to find an empty hole. Secondly, the object remaining in the tire inhibits the release of air from the wheel.
Many will be surprised, but it is better not to pull a protruding foreign object out of the tread. If the puncture is small, this will allow you to get to a car service without changing the wheel to a spare one, but only periodically pumping it up with a pump, and there you can start fixing it. In addition, with the self-tapping screw not removed in the tire fitting, it will be much easier to find the cause of the air leak, pull out the stuck object and seal the hole.
2. Side cut tire
Tire cuts are much less common than punctures. The sidewall of the wheel is usually damaged: it is much thinner than the running part of the tread.
The cut is usually caused by diving into a sharp-edged pothole or an unfortunate collision with a curb. So park carefully. Sometimes, however, cuts do not depend on the driver - after all, one of the "well-wishers" could try.
In any case, the cut must be examined. In case of minor damage to the wheel, you can still try to restore it (in a car service). If the cut does not reach the cord (rings of soft metal threads that run along the entire inner diameter of the tire), then the wheel usually does not flatten. With a more severe cut, the tire will have to be changed.
In some car services, the masters can offer you the restoration of a wheel with a serious cut. Even if the tire does not deflate, under the influence of pressure it can burst at any time. And, most likely, this will happen while driving, and the consequences can be very serious. So it's not worth the risk.
3. Loss of tight contact of the tire with the disc itself
Driving on "high-quality" Russian roads often leads to disk deformation. Enough to fall into the hole. Inexperienced drivers may also encounter this problem due to a strong impact on the curb while parking or turning (what is called: "not fit").
The disk is deformed, as a result of which the tire bead seal becomes leaky, and air begins to escape into the gap formed.
Violation of the geometry of the rims entails many problems. Firstly, a dent in the disc spoils the tire, on which a “hernia” often occurs. In this case, rubber can no longer be saved. Secondly, disk deformation often leads to increased vibration of the car body or “beating” of the steering wheel. As a result, the suspension will also suffer.
However, this problem can be solved by straightening (aligning) the disk in any tire fitting.
4. Broken nipple or spool
And finally, another reason for a flat tire is a malfunction of the nipple (inlet-outlet device) or spool (valve inside the nipple). It is very simple to diagnose the “etching” of air through the nipple: just lick your finger and smear the outlet with saliva. If the liquid starts to bubble, then the problem is in the nipple.
To stop air leakage, you will either have to glue the place where the nipple valve fits on the disk and then you can’t do without tire fitting (the wheel must be disassembled), or replace the faulty spool and re-inject air into the wheel.
What should I do if the wheel "punches" while driving?
If during the trip you heard loud "squishing" sounds, then, most likely, you have a flat tire. When "breaking through" the front tire, the car can also "lead" to the side. Do not rush to press the brake pedal, despite your instincts. Otherwise, the drift is guaranteed. Try to keep the car on a straight path even if it is drifting to the side. You need to let the car stop smoothly and on its own, ideally on the side of the road. Turn on your hazard warning lights and put up a warning triangle to protect yourself from being kicked in the butt. And then deal with troubleshooting.
How to identify the location of the damage?
First, inspect the wheel and listen. You can often hear air escaping when punctured. This will help you find the hole.
However, it also happens that the tire outwardly looks intact, but does not hold air. In this case, you need to pump up the wheel one to one and a half atmospheres, apply soap suds on it and see where air bubbles appear.
If this does not help, you will have to remove and immerse the entire tire in water.
If these methods do not help, then there is another one. True, you will have to disassemble the wheel and run a rag along the inner surface of the tire. The fabric will certainly catch on to a foreign object.
Driver's lifesaver: spare tire and repair kit
Be sure to bring a pump and repair kit with you. After all, no one is immune from hitting a nail. Well, a spare wheel, a jack and a balloon wrench, of course.
Installing a spare is pretty easy. For this, the girl does not have to strain at all - you can stop a passing car. In Russia, people are sympathetic, they should not leave in trouble!
1. First, unscrew the mounting bolts from the wheel.
2. Install wheel chocks (large stones will do instead), shift into gear, and apply the handbrake to keep the machine from moving during repairs.
3. Raise the desired side of the car on the jack.
At the same time, make sure that the car does not warp in the process of lifting.
4. We change the “punctured” wheel to a spare one.
5. We tighten the bolts on the wheel until they stop, but do not tighten yet.
6. We lower the car.
7. And now we completely tighten the bolts.
At the same time, moving on the dokatka, you should not accelerate much. And of course, in the near future it must be replaced with a full-size wheel.
If the puncture is small, then you can get by with a repair kit by closing the puncture. However, it must be purchased in advance and carried in the trunk of a car.
What if there is no spare?
Can you drive on a flat tire? Theoretically, yes, constantly pumping up the tire (if the air does not leave quickly). However, it is highly undesirable to do this, since the rubber tire quickly breaks, the disk is deformed, and the car shakes violently, which makes movement unsafe.
