Photo: istockphoto.com
Sometimes the simplest things can bring the greatest summertime pleasures. Outdoor fun doesn’t have to include expensive, custom-built play sets; you can create instant outdoor entertainment by upcycling an old tire into a one-of-a-kind swing. Read on to learn how to make a tire swing the easy-peasy, old-fashioned way!
Tools & MaterialsRELATED: The Best Tree Swings for Backyard Fun
Advertisement
This project is perfect for beginners, as you only need a few tools and basic knot knowledge—oh, and you need a tree ( a big tree).
Chances are, if you’re looking into how to make a DIY tire swing, you already have a tree in mind for mounting it. Just make sure that it’s large, healthy, and the branch that will hold the tire swing is at least 8 inches thick. If a tree shows signs of decay or has cracks or dead branches, it’s not suitable for a tire swing.
Other considerations include making sure there’s enough clearance between where the tire hangs and the trunk of the tree as well as the ground. And removing large rocks or other tripping hazards from the area beneath the swing.
Photo: istockphoto.com
Any standard-size passenger car rubber tire will work for a swing, though you could use a smaller or larger tire as long as you factor the weight into your specific project. If you find a used tire, be sure it has some tread left to prevent any wires from popping through the surface and scratching or poking swing users.
Give the tire a thorough cleaning with a pressure washer. If you don’t have the right tool, take the tire to the car wash to clean it with one of the high-pressure hoses on the premises.
When you’re ready—that is, when you’re satisfied with the cleanliness of the tire—drill holes in the bottom of the tire to prevent water from pooling when it rains. You don’t want mosquitoes to get wind of any standing water! On that note, you’ll also want to check for bees, wasps, and other insect pests each time you or your kids use the tire swing.
Advertisement
RELATED: Weekend Projects—5 Fun DIY Swing Sets
Photo: istockphoto.com
Determine the maximum weight your tire swing will hold. That includes the weight of kids (or adults) that will use it as well as the weight of the tire you choose. Then select a heavy-duty braided exterior rope that is rated for three times that weight.
Cut a section of rope to the desired length plus a little bit extra for tying a couple of knots. If needed, melt the ends to keep the rope from fraying. Tie a double bowline knot on one end of the rope, making sure to leave a little slack in the loop portion of the knot.
Toss the knot end of the rope over the tree branch. If you need a little help, place a softball in a sock and tie the sock to the knot end of the rope; then toss the ball over the branch. Thread the opposite end of the rope through the loop of the bowline knot and pull it tight. The knot will travel upwards until it finally reaches the branch.
Tie another double bowline knot around the top of the tire, tightening it so the tire hangs at the desired height off of the ground.
Photo: istockphoto.com
Have the heaviest member of your family test the tire swing to ensure its strength. You may not want to tell this person why he or she was chosen…
Let your impatient kid swing already. You can cut off the excess rope later. Pat yourself on the back and admire your handiwork from the street, just like the neighbors will.
RELATED: How to Make a Tire Swing with Chains and Bolts
Got questions about how to make a tire swing? You’re not alone!
Advertisement
One of our favorite DIY tire swing ideas is to find a tire, clean it thoroughly, and hang it by a rope from a sturdy tree branch.
First and foremost, you need a tire. You’ll also need some tire cleaning supplies (or clean it at a self-serve car wash), braided exterior rope rated for three times the weight of the tire and swing users combined, and some basic knot knowledge. You’ll also need a sturdy branch on a large, healthy tree.
The best rope to use for a tire swing is one that is braided, designed to hold a lot of weight, and rated to withstand outdoor elements such as UV rays, rain, etc.
Kick off your summer staycation by adding a tire swing to your outdoor space. This simple project can add hours of fun and relaxation with minimal effort and expense. Just be sure to keep safety top of mind by thoroughly inspecting the tree and branch that you intend to mount it on, and by selecting rope that is rated for the amount of weight that your specific tire swing will hold.
Advertisement
By
Kamron Sanders
Kamron Sanders
Kamron Sanders is a home improvement expert and writer with over 15 years of hands-on construction, remodeling, woodworking, home repair, and landscaping experience.
He has also written for HGTV. Kamron's expertise ranges from troubleshooting saws and lawnmowers to painting kitchen cabinets.
Learn more about The Spruce's Editorial Process
Updated on 07/08/22
Reviewed by
Deane Biermeier
Reviewed by Deane Biermeier
Deane Biermeier is an expert contractor with nearly 30 years of experience in all types of home repair, maintenance, and remodeling. He is a certified lead carpenter and also holds a certification from the EPA. Deane is a member of The Spruce's Home Improvement Review Board.
Learn more about The Spruce's Review Board
Stephen Simpson / Getty ImagesProject Overview
Introducing a tire swing to your backyard is sure to be a decision that you (and, more importantly, your kids) will be happy you made. If you've seen tire swings and assumed they're too hard to install or difficult to make safe, you may be surprised to know that this project is actually very simple.
And, when done right, tire swings can be a safe form of entertainment for both children and adults.
11 Delightful Swing Ideas for Yards of All Shapes and Sizes
There are two popular styles of tire swings. One type features a horizontal tire with ropes attached at three equidistant points. The second type features a vertical tire with a rope simply tied around the top of the tire. For this project, we'll focus on the latter option as it's quick, easy on the wallet, and a more versatile option for users of all sizes.
A tire swing requires a solid branch at least 8 to 10 inches in diameter that is in good health.
Fruit trees, evergreens, and other softwood varieties should be avoided, as these are prone to breaking under pressure. Instead, look for strong, mature trees such as oak trees, maple trees, hickory trees, and other hardwood varieties.
How to Build a Swing
If you don't have one already, recycled tires in good condition are readily available. Check tires stores, online listings, and family and friends. Look for a relatively large tire with a wide sidewall and no dry rot.
Polypropylene rope is perfect for a tire swing, as it won't be compromised as a result of outdoor exposure. When used properly, 3/4-inch polypropylene rope is more than strong enough to hold the weight of a tire and any potential user. The amount needed will be determined by how far your branch is from the ground, but you should aim for a branch no further than 15 to 20 feet high. In this case, a 50-foot rope should do the trick.
Polypropylene rope is a strong, synthetic rope that is resistant to rot and deterioration due to water. While many styles are colorful, varieties that imitate the look of natural rope can also be found.
If you don't have a ladder long enough to lean on the tree branch, there's an easy way to get your rope over the branch. Simply tie string (something like mason line string will do the trick) around a small object like a bean bag and toss it up over your branch. Once over, tie the other end of the string to your rope and pull it over the branch. Repeat this process once more to double the rope over the branch and prevent it from slipping down the branch.
To secure the tire to the rope, no hardware is needed. Simply slide the two ends of the rope through the center of the tire and around the top of the tire twice.
Adjust the tire until it sits 3 feet off of the ground to account for rope stretch. Approximately one foot above the top of the tire, tie a bowline knot with plenty of excess rope left at the end. This will be trimmed later.
Improperly tied knots can pose major safety risk. If you aren't confident in your knot tying abilities, consult with someone who can help ensure the job is done correctly.
Step back and inspect the tire, the rope, and the positioning of the tire from the ground and tree. Once you've verified that the rope is properly knotted and the tire is adequately spaced from the tree and ground, have an adult carefully test the swing. This will allow the adult's weight to set the knots and stretch the rope.
Once the knot has been fully set, trim the excess rope from the knot, leaving approximately 4 to 5 inches. Use a lighter to burn the ends to prevent fraying.
Without drainage, the tire will be prone to collect water, leading to messes and mosquitoes. To add a drain hole to the tire, use a 7/8-inch paddle bit and drill through the lowest point of the tire.
To further prevent pests, consider treating the tire with a bug repellant that is safe for human contact.
Depending on the size of the user, this tire swing can be used by sitting inside or sitting on top. Always hold the rope tightly and avoid swinging toward the tree.
While the polypropylene rope and the tire will likely last forever, trees are living and ever-changing. Make a habit of consistently inspecting the tree branch and the position of the rope on the tree. Should you suspect anything has been compromised, always act on the suspicion and ensure the safety of the swing.
Additionally, tire swings can serve as ideal homes for wasps, bees, spiders, and other biting and stinging creatures.
Always inspect the inside of the swing before playtime and instruct your kids to do the same.
The 9 Best Swing Sets of 2022 for Your Backyard
There are many toys in the land of childhood. Girls are one, boys are completely different. But as soon as a building appears in the yard where you can ride, it attracts children of all ages, both boys and girls. Even if this swinging structure is unprepossessing, the children will still be delighted with it. Such an impression on them will be made even by a simple swing from a tire, which someone caring dad will build with his own hands.
The device of the simplest children's swing made of tires It will bring joy not only to your beloved child, children of the yard, but also to young people who are not averse to swinging on this simple device. Swinging structures, in addition to being fun for children and adults, also strengthen and develop the vestibular apparatus.
Such are the usual tire swings. Any parent can build them.
If a child, when he rides in a car, gets sick, feels sick, then he should swing on this structure at least once a day. When rocking, all the muscles of the body are evenly loaded, and this makes the baby physically stronger and more self-confident. Weakness and dizziness will stop, fear of rapid movement and heights will disappear.
Return to the table of contents
Material Content
Such devices have pros and cons. Positive aspects:
The disadvantage is the smell emanating from the rubber, which not everyone likes. You can get rid of it, or at least reduce it, if you paint the tire inside and out.
It will also make it look more attractive.
Back to the top
First of all, they must be very reliable, as they are set for the most privileged members of society - children. Therefore, a strong tire is needed, without cracks, damage. The tires of SUVs, tractors, trucks are preferred. But it is better if it is of medium size, so that it is convenient to swing for both children and adults.
Hang the tire on a strong rope or metal chain. So that the seat is securely held in a horizontal position, does not turn over, it can be made with triple fixation. From above, the device is attached to a horizontal crossbar, which can be a strong beam, a metal crossbar, or a thick branch of a strong tree.
The distance from the ground to the seat must be such that the child can easily climb onto it. The classic option is a double tire fastening with chains. It is the most durable, very comfortable, safe, because, while swinging, you can hold on with both hands.
It is necessary to install a ground or suspended garden swing in the country so that playing children are always in front of their parents. When assembling ground structures using half rail as a support, always ensure their high stability.
In order for the rocker-balancer not to fall on its side, it is better to use both parts of the cut tire for the base, fastening them together along the entire semicircle. Handles should be made on the lever board for the children to hold on to while swinging.
Back to the Table of Contents
It would seem that with such a limited material, one cannot count on diversity. But home craftsmen do wonders with their own hands. Therefore, tire products are as follows:
This is the classic version of the swing. Not a single playground in the yard can do without such a simple design. Two sit down on the edges of the board-lever and swing, then rising, then falling.
Instructions for making a ground rocker out of tireTo raise one arm of the swing, the child sitting on it pushes off the ground and his partner lands on his feet.
Such devices are of the following types:
To make this DIY balancing device, you will need a solid, smooth board made of wood or some other material and a solid support for it. The original basis for the swing can be two automobile wheels with tires, connected along the axis by a metal cross member, to which a lever is attached in the center.
Children and adults like to swing on this structure. It is also convenient because it can be easily moved around your own yard or summer cottage.
There is another version of the rocking chair-balancer.
Take a wide tire from the wheel of a large machine such as a tractor or tractor, cut it across and use one half as a support. You will also need two boards. One should be equal in size to the diameter of the tire and fit tightly into its upper part, where it is attached to the rubber with nails or self-tapping screws. The second, long, superimposed on the first and fastened to it.
For comfortable and safe rocking, handles should be attached to the board, preferably made of soft material. Holes must be drilled in the bottom of the tire so that water does not accumulate in its cavity.
More stable devices will be those that have two halves of the tire as a support.
They will need to be bolted together around the entire semicircle, and a long board should be attached on top. Rubber for greater attractiveness should be painted in bright colors, apply drawings.
You can make a small swinging balancer with your own hands to decorate a children's room, moreover, without having special skills. The technology of its manufacture is the same, only the upper plank in length should not be more than the diameter of the tire. Swing while sitting on it, you can only sideways, left and right. Armrests must be made along the edges so that the child can hold on to them.
And if you ride the balancer from above, you get a new fun: it will be possible to swing back and forth. On one side, instead of a handle, you can fix a horse’s head carved from wood, and on the other, a tail. Such rocking chairs are very popular with small children. You can come up with a stylized figure of another animal. It depends on the ability and creative imagination of the pope.
They are also very easy to build yourself.
The main thing is to find a suitable crossbar to hang them. It can be a horizontally growing thick tree branch, a beam in a barn, or a specially assembled metal structure. And as a seat, of course, a car tire is suitable.
You need to choose rubber without damage, and reinforce it with the more attractive side up.
Wash the bar well with detergent before attaching ropes or chains. The simplest swing is a tire hanging vertically on one rope or chain. Making them with your own hands is easy. They ride on such a swing, passing their legs through the wheel and hanging them from the other side.
The original design of the suspension swing made of tire They swing with both hands on a single mount. But this is not very convenient. Such a device is usually suspended from a tree near the river itself, and the boys, standing on the tire, or grabbing its lower edge, swing as hard as possible, and then jump into the water. True, not every child will decide on such entertainment.
In the yard or in the country it is better to make a swing, in which the horizontal seat rests on a double mount. It is desirable that it be a metal chain. They attach it to the tire using cargo bolts that have a ring instead of a head. For them, holes are drilled in rubber, fixed, and S-shaped hooks are inserted into the eyes. They are threaded into the lower chain links and clamped with pliers.
Fastening hooks to the tireThe upper ends of the hangers are fixed on the crossbar. For convenience, a round wooden board is placed on the tire, and a pillow or rug is placed on top of it.
There is another version of the hanging swing - a cradle made of tires. It is also made by hand. With a shoe knife or other cutting tool, the protector is cut in a circle to the power ring from the metal cord, leaving only a part of the rubber for the seat. From above, ropes or a chain are attached to the resulting circles and suspended from the crossbar. On such a device, even very small children can be rocked.
You can cut anything out of rubber from a tire. By bending it, you can make a chair with a back. Home craftsmen make swings in the form of various animals and birds. Sometimes near a private house there is a figurine of a horse, on which a baby is swinging, sitting on horseback. Some make rubber birds, dragons, even cars and motorcycles. Children enthusiastically climb onto such rocking chairs. The fantasy of dads is limitless and they willingly share it on the World Wide Web.
Take the kids away from the electronics and get outdoors with a tire swing in the backyard. Tire swings have always been around because they are suitable for all ages and are inexpensive to make.
$
Day
Show all
Boy swinging in tires
Photo credit: Purestock
Purestock
Structures Playhouses Yards OutdoorsBy: Chris Hill
Rock the whole family by building a tire swing.
The iconic swing set is a beautiful piece of America that evokes childhood memories of simpler times and lots of backyard fun. It's just a rope and a tire, right? Well, it is, and it is not. You need to make sure you choose the right tree, branch, rope and of course the tire. The best choice would be hardwood, such as oak or maple. A coniferous tree such as a pine will not cut it because its branches are too resilient. Yes, I'm sure you've seen a lot of swings tied to a pine tree, but let's choose the best one possible.
Once you have chosen a tree, let's start pruning it to the right branch. You want one that will give you enough height to swing but not too tall to work with. Try something around 7 or 8 feet. Now make sure it's at least 6 inches in diameter. Don't understand geometry? Measure around the limb - you are looking for 19 inches or more in circumference. Note: Make sure you have a sturdy stepladder and a helper when tying the rope to the limb.
Choose a place to hang your swing at least 3 feet from the tree trunk.
Choose rope that is at least 3/4" in diameter. From now on, you will have many options, but if you are looking for a natural fiber look, something that is resistant to sunlight, heat and abrasion (you want it to last, right?), then your choice beckons.
Check the label to be sure, but usually manila rope has a working load limit of 695 lbs. You can certainly find higher load limits for stranded polypropylene (1090 lbs and about 15% more per foot) or stranded nylon and polyester (1420 lbs about 80% more per foot), but you'll spend a lot more and not get pretty resistance characteristics like beckoning in the elements. Take a lot of rope - 15 to 20 feet - because you certainly don't want to be short. A good rule of thumb is to set the bottom of the tire at least 12 to 18 inches off the ground.
If cost is not an issue, you can simply buy one new tire. But in fact, a used tire is what you need. There are used tire shops that sell you one tire. You can also try online tire stores to see if you can buy them. This will depend on the network policy. You can also try junkyards or salvage sites. And you might be lucky to spot a tire at a garage sale or a flea market.
Make sure the tire is in decent shape, with no major cracks or cracks. Also look out for a thin tread where reinforcing wires can be seen, which should be avoided.
You can use the same knot to attach a rope to a tire and tie a tree. There are as many opinions about which knot to use as there are knots, but there are two main types you can use: loop or hitch. The simplest loop knot is the bow and probably what you imagine in your mind when you think of tying a knot.
Pass the rope over the limb, leaving about a foot at one end. Now make a loop on the longest side of the rope just below the limb.
Pass the other end of the rope through the bottom of the loop, then around the long end of the rope and through the loop again. Pull to tighten.
A more difficult but very powerful knot, it's a rolling hitch. Wrap one end of the rope around the limb twice.
Cross one end over the other, make a loop and tuck the end into the loop. Be sure to tighten the knot so that both ends of the rope are close and parallel to each other.
Finish off the open ends of the rope by tying an overhand knot (just a simple loop, then skip the end of the rope) as a temporary gap.
Be sure to tighten the knot so that both ends of the rope are close and parallel to each other.
Although not absolutely necessary, you can use the same node on both the branch and the bus. Adjust the cable length and knots to set the desired turning height of the tire.
A good rule of thumb is to set the bottom of the tire at least 12 to 18 inches off the ground.
To avoid fraying, you can try burning the end of the rope (be careful and prepare to extinguish the flame) or wrap the ends of the rope with outer tape.
After hanging the swing, drill drainage holes in the bottom of the tire to keep water from pooling inside the tire, creating a breeding ground for mosquitoes (and a big surprise when someone sits on the tire). Also, do not forget to periodically check the inside of the tire for aspen nests.
Instead of the standard square playhouse, build a piece of art that both kids and parents will love.
Help your kids become business tycoons by building a traffic-stopping lemonade stand. This simple tri-fold design makes it easy to store in a closed magazine.
Instead of a standard jungle gym for kids, build a combination A-frame fort, swing, and climbing wall.
Instead of the standard backyard tree fort, build a piece of art that both kids and parents will love.
Make your backyard more fun by installing a classic stair board.
Create this easy swing for your child to encourage vital outdoor play.
Toy kitchens can be very expensive. Save money by turning a popular (but inexpensive) piece of 1980s furniture into a personal kitchen for your aspiring chefs.
Create a backyard play area around the main kids pool.
