Add to Wishlist
Product Details:
Our Price: $135.97
Part # P311-5BE0533 Manufacturer # 63990 Condition: New
Winch upgrade kit converts the WARN A2000 to the 2500 Pounds.
Capacity winch. Comes with the contactor, wiring, and Mini Rocker control switch.
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
Box Dimensions 11.00 x 8.00 x 5.00 in
Box Weight 5.00 lbs
Add To Parts List Remove From Parts List
In Stock
Now: $126.54
This kit allows you to plug in a corded remote directly into the mini-rocker switch-no need to drill and install the socket like on existing systems.
This allows you to conveniently winch while on or off the vehicle. Kit includes minirocker switch with socket, corded remote, and all necessary hardware.
For Winches with Mini-Rocker Switches
Special Sizing Chart For This Item
Other Sizing & Product Notes
The use of button modules for switching electrical circuits is not always convenient due to the difficulty of visual position control, especially if there is no light indication on the buttons. Rocker switches are used in applications where constant visual position control is required. The principle of their operation does not differ from push-button ones, but at the same time you can immediately see in what position the switch is.
There are two-position (on / off) and three-position (on / off / on II) devices, the use of one or another type of switch is determined by the requirement for controlling the operation of electrical equipment or an automation and monitoring circuit. The body of the switches and the control link are made of high quality dielectric material, which is resistant to significant mechanical loads in a given temperature range.
| Series | Key features | Material | Mechanical | PDF | |
|---|---|---|---|---|---|
|
|
| Rocker switches of the KH series, designed for operation in adverse environmental conditions, are protected from accidental activation by a protective cap Available with or without illumination Various body color options Many engraving options | Housing: PA 6-6 Backstage: ABS Rim: PA 6-6 | Working temperature: Degree of protection: IP69K Panel thickness: 0.
| |
|
S-SR |
| Rocker switch in single pole and double pole configuration Possibility of panel installation UL approved Electrostatic discharge (ESD) protection - optional Terminal outlet on the side or bottom Max. current/voltage with resistive load:
| Housing and cover: UL94-VO, glass-filled polyamide Drawstring: polyamide Contacts and terminals:
| Working temperature: Storage temperature: Humidity test: | |
|
AS |
| Rocker switch in single pole configuration Black body, various backstage colors to choose from Connection with a soldering lug or directly to the PCB via terminals double insulation UL and CSA approved Max. current/voltage with resistive load:
| Body: PES Drawstring: polyamide Contacts and terminals:
| Working temperature: Service life: | |
|
MT |
| Rocker switch 1 pole 2 position
Possible degree of protection: IP68
Possibility of installation in PCB via terminals | Drawstring: Nylon 6/6 "soft touch" Finish: matt black or bright chrome
Sleeve: chrome-plated brass | Working temperature: Service life: | |
|
7000 |
| Rocker switch in single pole and double pole configuration Numerous designs for panel or PCB mounting Approvals: VDE, UL and CSA Max.
| Housing: diallyl phthalate or high temperature thermoplastic Drawstring: polyamide | Working temperature: Service life: | |
|
57000 |
| Subminiature rocker switch in single pole and double pole configuration Approved: VDE and CSA Connection with a soldering lug or directly to the PCB via terminals Terminal outlet on the side or bottom Various shapes and colors of curtains Possibility of installation in PCB via terminals Class I Current / voltage with resistive load: 3 A 250 V AC - 6 A 125 V AC | Housing: diallyl phthalate Drawstring: polyamide Contacts: silver Finish: stainless steel or tinned steel | Working temperature: Service life: | |
|
FM |
| Rocker switch in single pole configuration with or without illumination Possibility of connection with a soldering lug, directly to the PCB via terminals or "Quick connect" technology class II Approved: VDE and UL Humidity protection double housing | Body, yoke and frame: PA6/6 Contacts: silver Terminals: silver plated | Working temperature: Life time: 10,000 cycles | |
|
S |
| Rocker switch 2 or 3 positions in single pole and double pole configuration Approved: UL Terminal outlet on the side or bottom Possibility of panel installation Lots of backstage options Max.
| Enclosure and Coating: UL94-VO, glass filled polyamide or PES Drawstring: polyamide Contacts:
| Working temperature: Storage temperature: Humidity test:
| |
|
TR |
| Subminiature rocker switch in single pole and double pole configuration Large variety of contact materials Same wiring diagram on PCB as TL, TP and TG miniature switches Wave soldering Max. current/voltage with resistive load:
| Housing and cover: UL94-VO, glass-filled polyamide Drawstring: polyamide Contacts and terminals:
| Working temperature: Humidity test: 21 days at 95% RH (NFC 20-603 - IEC 68-2-3) | |
|
SMT TR |
| Miniature rocker switch in single pole configuration Wave soldering Max. current / voltage with resistive load: 0.4 A 20 V AC or DC Protected against electrostatic discharge (ESD) up to 10 kV | Housing: 4/6UL94-V0, high temperature thermoplastic Backstage: high temperature thermoplastic Contacts: gold-plated brass Terminals: Tin plated brass over nickel layer | Working temperature: Humidity test: EC 512-4 Service life at full load for:
50g (IEC 512-4) | |
|
2600 |
| 3 backstage shapes Protective rim (Model 2600LP) Approvals: UL, CSA, NF-VDE (EN 61058-1) With backlight or without Various colors of backstage Possibility of connection with a soldering lug, directly to the PCB via terminals or "Quick connect" technology | Housing: melamine / polyester Rim: polyamide Drawstring: polyamide Contacts: silver or silver-plated copper | Panel thickness: 0. Service life at full load: 10,000 cycles Operating temperature (silver contacts): -20º C to 85º C Operating temperature (silver plated contacts): -10º C to 55º C | |
|
KR |
| rocker KR series switches Protected against accidental activation Available with or without illumination Various body color options Many engraving options | Housing: PA 6-6 Backstage: ABS Rim: PA 6-6 | Working temperature: Degree of protection: up to IP69K Panel thickness: 0.8 to 4.6 mm Life time:
| |
|
KL |
| Two- and three-position rocker KL series switches Protected against accidental activation Available with or without illumination Various body color options Many engraving options | Housing: PA 6-6 Link: ABS or elastomer membrane Rim: PA 6-6 | Working temperature: Degree of protection: up to IP69K Panel thickness: 0.
| |
|
KI |
| rocker KI series switches Long service life Various body color options Lots of engraving options 3 types of terminals Backlight: 8 colors to choose from | Body and rim: ABS Terminals: silver plated brass | Working temperature: Degree of protection: up to IP68 Panel thickness: 0.8 to 4.6 mm | |
|
KG |
| Two- and three-position rocker KI series switches Approved: VDE (EN 61058-1) With backlight or without Protected against accidental activation | Housing: thermoplastic, UL94-VO Terminals: silver plated brass Contacts: silver grain | Degree of protection: up to IP65 Panel thickness: 0. Service life: 10,000 cycles Operating temperature (on/off): -20º C to 85º C Operating temperature (three position): -10º C to 65º C | |
To place an order, you can contact our managers through the contact form or write to [email protected].
Offices in Moscow, St. Petersburg and other Russian cities.
Most Frequently Asked Questions and Answers
Technical Concepts
The switch is a switch with three contacts. In this circuit, one electrical circuit is open while the other circuit is closed. Other designations for this electrical circuit are changeover magnetic contact or switch.
For example, this type of switch is often installed in a corridor. This way you can turn on the light at one end and turn it off at the other end of the corridor, or vice versa.
This is an example of a classic switching circuit.
The basic principle is simply explained: one switch either connects to another or opens the circuit.
The switch can also be used for switching off. For example, a lamp in a room can be turned on or off, respectively, from only one place. A classic example is a kitchen light switch to turn the ceiling light on or off.
When connected in series, two electrical consumers (eg lamps) can be switched on or off independently of each other. This requires a switch cover with two switching surfaces (rocker switches). They are only twice as narrow as a switch, circuit breaker, or cross (swivel) switch. Other designations are also double switch or serial switch.
Thus, with the help of a serial switch, two consumers of electricity can be switched from one place.
The double switch has two switches in one housing.
Thanks to the compact design, it is possible to save on the dimensions of the flush-mounted switch box during installation.
As with the serial switch, separate (serial) switches are also used.
The double switch allows two electrical consumers to be switched on from two different locations.
The cross switch has four electrical contacts and is also called a polarity switch (reverser). The switch can open or close a circuit independently of any other cross switches.
A common form of installation is cross-wiring, where in a room with multiple entrances the light can be turned on or off respectively from any light switch.
If an electrical consumer (eg a lamp) must be switched on from two or more places, cross switches are used. In this case, during installation, switches are set at the beginning and at the end, and any number of cross switches can be installed between them. When the cross switches are actuated, they interchange the corresponding wires.
If it is necessary to disconnect an electrical consumer from more than three places, a circuit with push buttons and impulse switches is a more economical solution. Because there are enough two conductors for each button. The cross switch requires four wires.
Control switches are used for external lights, external sockets or external bathroom switches.
When the switch is activated, respectively turned on, a neon lamp or LED lights up for control. Therefore, switch covers for control switches have a translucent window in the middle. They can be neutral white or orange, or have a symbol.
Neon lights require a neutral conductor. If there were no neutral conductor, the neon lamp would glow even when the switch is off.
You can control the blind motor with the blind switch. To protect the blind motor, you can always use only one button at a time. At this time, the other button is electrically or mechanically blocked.
Like the serial switch, this switch often uses separate rocker switches. Very often, these switches are indicated by a symbol (arrow up, arrow down).
A pushbutton circuit is a circuit with buttons and relays that often operates with a control circuit separate from the load circuit. Everyone knows this scheme for turning on the lighting in the entrance or the doorbell.
In home wiring, the pushbutton circuit is used when electrical devices must be operated from at least three locations. Although the circuit needs an impulse switch, it is easier to wire it. In addition, instead of an impulse switch, you can use a staircase lighting switch with a timer. The timer automatically turns off the light after a set period of time e.g. 2 minutes.
Other possible uses for the button are a doorbell or a door opener (door buzzer). Here, current flows only while the button is pressed. When the button is released, the circuit opens again and the bell stops ringing.
If the button is pressed after use, it always returns to its original position. For functional applications, there is a strictly defined position of the rocker switch. This results in a uniform appearance for multiple combinations.
Please note:
Pushbutton switch cannot be used for relay or ladder circuits.
Pushbuttons also available as serial switch, cross switch and control switch (illuminated).
Rocker switch already available from some manufacturers, but not compatible with conventional rocker switches.
Frequently asked question and this is a decision in favor of old or new technology.
In general, LEDs are characterized by their durability. LEDs are available in many colors such as red, yellow, blue, green.
Classic neon only available in red/orange. The service life of neon lamps is much shorter than that of LED lamps.
Control switches and buttons (keys) use LED or neon lamps. In houses with stairs, when using buttons (keys), the maximum current of the LED or neon incandescent lamp, respectively, should be taken into account. Otherwise, the staircase relay may be triggered by LED, respectively, neon lamps, which is undesirable.
Leading switch manufacturers offer a range of LED and neon lamps. In many functional applications, neon lamps can be easily replaced with LED ones.
There are many different devices to choose from for dimming. We want to present in this section some important points and information about dimming in order to make it easier for you to choose:
Depending on the consumer of electricity, there are different types of dimming:
Inductive dimmers
For incandescent lamps and high-voltage halogen lamps (230 V), as well as conventional (winding) transformers, the dimming of the light is carried out by inductive phase control.
Capacitive dimmers
Electronic transformers in low voltage halogen systems are controlled by capacitive phase control.
The dimmer can be controlled in different ways. Here you will find the classic dial for light intensity control and touch dimmers. Touch dimmers are controlled using a touch panel cover. A short press on the touch covers turns the light on or off. Long press the touch cover will dim the light.
The possibility of dimming an electrical consumer (eg a lamp) is indicated by a horizontal solid triangle with one or two letters below it.
The dimmer has the following designations:
C
The letter C indicates the possibility of dimming the light with a capacitive dimmer. For example, it is used for electronic transformers of low voltage halogen lamps.
L
The letter L stands for dimming with an inductive dimmer. For example, it is used for conventional inductive transformers of low voltage halogen lamps.
R
The letter R or the symbol for incandescent lamps indicates that only incandescent lamps can be dimmed with these dimmers.
In addition, there are dimmers from ELTAKO or HAGER, for example, which can be installed in the control cabinet, respectively, in the meter cabinet. This type of dimmer is controlled by classic buttons that close the contact. A short press of the button turns the dimmer on or off respectively. Pressing the button longer causes the brightness to change.
Motion sensors can be used instead of a light switch indoors and outdoors. Essentially, a motion sensor is a sensor that responds to changes (movements) or even heating within a given detection range.
The motion detector can be used indoors, for example in the cellar or garage. As soon as you enter the detection area, the light turns on automatically and turns off again automatically after the after-effect time (illumination interval) has elapsed.
For example, the light in the basement is especially handy when your hands are busy with the laundry basket or shopping.
A motion sensor greets guests outside and provides a securely lit path. Intruders, on the other hand, are immediately the center of attention and are held back by the light.
The motion detector itself can be adjusted, for example, for lighting intervals and sensitivity.
Order
You can change your order if the product has not yet been delivered or ordered from the manufacturer. Just call VOLLTA customer service or send us an email.
It is very important to us that you are informed of the current status of your order.
Therefore, we send you the following information about the status of your order by e-mail:
In addition, you can always see the status of order on www.
vollta.ru.
VOLLTA OHG (OTT) provides services to individuals and traders, as well as public institutions and authorities.
You can cancel your order at any time until the moment the order is sent and thereby cancel the purchase.
Cancellation justification is not required. If you would like to cancel your order, simply call us at +49 152 03
0 or send an email to [email protected] with your order number and your name.
Alternatively, you can also use the contact form.
If you have already paid, you will be refunded immediately.
After the first order through our online store, you automatically become a VOLLTA customer.
To do this, you select the products you need and go through the ordering process.
During this process, you will be asked to enter your details (for example, billing address, shipping address, etc.). After completing the order process, you become a new VOLLTA customer and will receive your customer number upon delivery.
You will receive a customer identification number after you order a product from VOLLTA for the first time. You will find your customer identification number on the order confirmation, invoice, invoice and status email.
Name and address can be easily and quickly changed online for the next order.
Briefly describe the process of placing an order in the online store:
At the end of your order, you will receive an email to verify and confirm your order.
You can contact VOLLTA in the following ways:
Phone: +49 152 03
0 Fax: 040/600 38 60
E-Mail: [email protected]
Contact form: go to the form now
We look forward to requesting a quote.
Please send us your request for a quote in the following ways:
by email: [email protected]
by fax: 040/600 38 60 - 60 or use the contact form
Payment Your data is optimally protected when shopping on the website vollta.ru. To prevent unauthorized third parties from accessing your data, VOLLTA uses the most secure Secure Socket Layer (SSL) encryption technology. Public institutions, authorities and commercial customers with a high order volume. VOLLTA OHG Am Neumarkt 38 C 22041 Hamburg or faxed to:
SSL is a standard protocol recognized on the Internet for secure communication. All order data is transmitted in encrypted form to VOLLTA. You can read more about this on the privacy page.
In order to activate a purchase with an account, we need a first written order sent by mail on letterhead signed and stamped:
All further orders can be made with an online shop account.
Individuals
Unfortunately, purchases by account are not yet possible for private customers. In the future, we are working on opening the possibility of buying by account for regular customers, starting from a certain amount of the order.
Please use the available payment methods until then.
You can pay for your order at VOLLTA as follows:
- cash in advance
- PayPal
- cash upon receipt
- on account (currently only for commercial customers, government agencies and authorities)
If you have chosen the PayPal payment method, this payment is automatically insured by Paypal.
For more information, please visit the PayPal website.
Shipping
DHL parcels are insured according to the value of the order. For orders up to 500 euros, standard DHL insurance is used. If you order more than 500 euros, additional insurance from VOLLTA will be valid in the amount of the order value at no additional cost to you as a customer.
When ordering through our online store, you can enter a different shipping address in addition to the billing address.
This is especially useful if you are rarely at home and prefer to deliver goods to work, friends or relatives.
VOLLTA delivers goods abroad.
Please check delivery to your country on the shipping page.
If you would like to deliver to a country not listed, please send us an email at [email protected] or use the contact form .
We ship with our partner DHL.
In principle, orders are delivered in full.
No partial deliveries.
However, we offer partial deliveries to our customers. In this case, please contact us.
Please note that in this case the shipping charges will be recalculated for each partial delivery.
The fastest way to receive your item is with PayPal or cash on delivery.
(Valid only in Germany)
Of course, you can pick up the ordered goods from us.
To do this, during the ordering process, select the type of delivery "self-delivery".
Complaint, return
Yes, you can return delivered goods to us within the cancellation period without giving reasons.
Please see pages " return and/or General Provisions".
Return costs are dealt with in accordance with the clarification of the right to cancel.
In case of a complaint, please first contact our customer service via e-mail [email protected]
In addition, you can also use the contact form form .
Describe the reason for your complaint in as much detail as possible.
Hint: Photos can make things much clearer and speed up your claim processing!
(3) Please wait for a response from VOLLTA customer service
Our customer service will contact you immediately and explain how to proceed.
Important note:
do not send the product back without the approval of customer service.
During the course of each order, you will find our General Terms and Conditions at its last stage by clicking on the corresponding "General Terms" link.
In addition, upon delivery of the goods you will receive the General Terms and Conditions in printed form.
In addition, you will find our General Terms and Conditions on our website below under "General Terms".
Click here on AGB to view the VOLLTA General Terms and Conditions.
All your payments sent by VOLLTA will be refunded to the bank account or credit card account used for your order. This also applies to PayPal payments.
If you paid with PayPal, you will also receive your money back to your Paypal account.
If you paid by bank transfer, your money will be returned to your bank account.
A receipt for the loan amount will be sent to you by e-mail.
Important note:
If you are paying by bank transfer (prepayment), please provide us with your bank details for a bank transfer refund.
Do not use reverse direct debit!
If you nevertheless issue a reverse direct debit, in which case we will charge fees/fees for the reverse direct debit. This means that you incur quite high costs for this reverse direct debit transaction.
8 to 4.6 mm 
current / voltage with resistive load: 
current / voltage with resistive load: 
8 to 4 mm 
8 to 4.6 mm 
8 to 4.6 mm 
