Rated 4.50 out of 5 based on 2 customer ratings
(3 customer reviews)
€ 36.00
When working on the vehicle’s tyres and carrying out seasonal changing of tyres, you need to know the technical characteristics of tyres and wheel rims. You need to be in possession of proper inspection and mounting/dismounting skills, and you need to be able to advise the customer in safe operation and follow-up procedures. The vehicle’s tyres and wheel rims will give trouble-free service when the tyre and rim condition is attended to by a properly trained tyre-and-wheel professional.
As regards the work and its technical content, there is plenty of information, guidance, experience, and opinions available, both true and false. That is why this study package will provide you with the correct and safe starting point for entering the tyre industry as a field of work.
You will get to know the technical characteristics of tyres, wheels and mounting/dismounting procedures of wheels/tyres, and the impact of the various choices made when doing this work. You will learn the basics of good customer service and be able to guide the customer to make better and safer choices, better and safer vehicle use, and adopt correct further measures.
Find the correct work methods and tools to use in changing wheels/tyres. The steps are shown implemented in two ways: as done by professionals and as done by DIY people. You will notice differences in how the job is done and be able to identify those work stages where most of the DIY mistakes happen.
The focus of the “Basics of tyre work” section is on learning the correct sequence of work stages in removing and refitting tyres/wheels, and how they are carried out in the proper manner without causing damage to tyres and rims.
The course of study includes plenty of pictures of the work stages, and together with the cross-sectional presentation progressing with the work, they serve as a guideline to the actual trainee stage.
In the section “Wheel Balancing” you will learn how wheel imbalance impacts on wheel behavior and how wheel imbalance can be rectified using the right tools and accessories. Study is supported by topic-specific sets of questions and a printable material with applied practical tasks.
Open Product Sheet (PDF)
After completing this online study module, you will be able to carry out inspections of tyres and wheels, understand the work operations required to change a vehicle’s wheels/tyres and perform tyre balancing for the most common vehicle wheels and tyre types.
After completing your module of study and approved completion of the exercises, you will be allowed to take the final exam. After completing the final exam, you can print a Prodiags certificate from your attainments register as proof of your expertise.
Open Product Sheet (PDF)
To fully benefit from your study, you have to be competent with using the tyre work equipment placed at your disposal, and be familiar with use of the equipment in accordance with the equipment manufacturer’s instructions.
This course’s topics and objectives correspond in scope to a conventional 1.5 – 2 day training event.
Once you have made your payment, you get immediate access to the content in the form of a license valid for 12 months. You’ll save time and money by not needing to travel.
Internet connection and PC or laptop with browser. Recommended screen resolution 1024 x 768 or higher.
We want to make sure that you always have the latest version of our product.
Prodiags reserves the right to make real time updates and changes.
This way you’ll always have the best version, without extra fees.
Open Product Sheet (PDF)
1/4 – I’m a mechanic and I want to direct the payment for the training to my foreman, how can I do this?
Open/print out the link’s instructions.Printable order instructions (PDF)
2/4 – How can I provide my mechanics with useful training for example when a customer cancels an appointment?
Read more about the benefits >> Workshop Manager
3/4 – What knowledge is required from me in order to provide added value to my training event with pre-learning and online material?
Learn more >> Trainer / Teacher
4/4 – How can I share and present Prodiags products to my community?
Open Influencer Form >>
Tyres, Rims and Tyre Work Online Training 12 Months Access
When working on the vehicle’s tyres and carrying out seasonal changing of tyres, you need to know the technical characteristics of tyres and wheel rims.
You need to be in possession of proper inspection and mounting/dismounting skills, and you need to be able to advise the customer in safe operation and follow-up procedures. The vehicle’s tyres and wheel rims will give trouble-free service when the tyre and rim condition is attended to by a properly trained tyre-and-wheel professional.
COVERED IN THIS COURSE?
WHY THIS COURSE?
As regards the work and its technical content, there is plenty of information, guidance, experience, and opinions available, both true and false. That is why this study package will provide you with the correct and safe starting point for entering the tyre industry as a field of work.
WHAT WILL YOU LEARN?
You will get to know the technical characteristics of tyres, wheels and mounting/dismounting procedures of wheels/tyres, and the impact of the various choices made when doing this work.
You will learn the basics of good customer service and be able to guide the customer to make better and safer choices, better and safer vehicle use, and adopt correct further measures
Find the correct work methods and tools to use in changing wheels/tyres. The steps are shown implemented in two ways: as done by professionals and as done by DIY people. You will notice differences in how the job is done and be able to identify those work stages where most of the DIY mistakes happen.
The focus of the “Basics of tyre work” section is on learning the correct sequence of work stages in removing and refitting tyres/wheels, and how they are carried out in the proper manner without causing damage to tyres and rims. The course of study includes plenty of pictures of the work stages, and together with the cross-sectional presentation progressing with the work, they serve as a guideline to the actual trainee stage
In the section “Wheel Balancing” you will learn how wheel imbalance impacts on wheel behavior and how wheel imbalance can be rectified using the right tools and accessories.
Study is supported by topic-specific sets of questions and a printable task booklet with applicable practice tasks.
PREREQUISITES (PRE-KNOWLEDGE / SKILLS) FOR TAKING THIS COURSE
To fully benefit from your study, you have to be competent with using the tyre work equipment placed at your disposal, and be familiar with use of the equipment in accordance with the equipment manufacturer’s instructions.
SYSTEM REQUIREMENTS
Internet connection, PC or laptop, Browser with flash plug-in support
LEARNING OUTCOMES
After completing this online study module, you will be able to carry out inspections of tyres and wheels, understand the work operations required to change a vehicle’s wheels/tyres and perform tyre balancing for the most common vehicle wheels and tyre types.
CERTIFICATE
After completing your studies and appropriately completed assignments, you will complete the final exam.
After completing the final test, you can print a Prodiags certificate from your performance record to mark your expertise.
HOW TO BUY?
Just click on this link below or in the description above and this will link you to the Prodiags online training shop
Click here to purchases this course or other courses on Prodiags website
And add it to your cart and complete the order and you will then receive a email with your username and a link to activate the course.
You must activate the course within 3 days of receiving the email and when activated you will have 12 months access to the course.
Note the email you use to place the order will be your username for the course.
It can take up to 24 hrs (Monday to Friday) to receive the activation email
On the support page it has information on how to order and how to use etc, click here to view support page
Only logged in customers who have purchased this product may leave a review.
If you want to ask a pre-sale question about this product, please feel free to use the form below.
Your First Name (required)
Your Phone (required)
Your Last Name (required)
Your Email (required)
Your Question
Tire fitting courses are in high demand, as are tire fitters themselves (tire fitters). Individual specialists are increasingly required for straightening and rolling discs, changing tires, and repairing them.
Universal tire fitters and tire fitters who know how to find an approach not only to cars, but also commercial vehicles, including special equipment, buses, "heavyweights" - trucks, road trains, tractors, are especially valued.
Tire fitting services are relevant in a variety of situations, for example:
Responsible training in tire fitting and balancing avoids a number of mistakes, among them:
If the contact patches are broken, riding becomes unsafe. But inexperienced tire fitters or those who are in a hurry and do not attach importance to this detail often, alas, ignore this point. 
If calibration is not performed, accuracy, and hence the proper result when performing tire fitting work, should not be expected. Ideally, a specialist who has undergone comprehensive training in tire fitting and wheel balancing should have the following things bounce off their “teeth”:
One of the problems, if you want to get comprehensive knowledge and improve your skills in the field of tire fitting, is to find a suitable training center. Still, the direction is highly specialized, and it is not so easy to find it near the house. But thanks to modern technology, there is no need to look for tire fitting courses in Tyumen, a specific area of \u200b\u200bthe vast St. Petersburg, or even more so Moscow. You can purchase access to the electronic interactive program Tires, wheels and tire fitting on the ELECTUDE platform. Classes are available from anywhere in Russia, and not only in Russia, but also in other countries (the course organizers have representative offices in Belarus, Kazakhstan, Ukraine).
The software product is focused on modular learning. The program includes 16 training modules. Particular emphasis is placed on the arrangement of vehicle wheels, service operations, including maintenance and operation of discs, tires, tire pressure monitoring system.
Estimated time for studying the material is 10 hours. But please note: this is an average time. Everyone can work at the most convenient rhythm for themselves and master the program at a more intensive or “stretched” pace.
In addition, it is important to understand that this is not just training, but a comprehensive certification system. Therefore, service station training centers have every opportunity to not only train specialists, but also organize an objective assessment of their competencies, and select worthy personnel for the tire repair area.
Certification system, “sharpened” for tire fitting, is 15 special test modules. The total time for passing the certification is 3 hours.
Hofmann offers a variety of training options to enhance candidates' previous knowledge and skills.
The training conditions are ideal because all our training centers are equipped with a wide range of our first class equipment.
We provide services that enhance the competence of our customers and partners in the automotive industry.
We see ourselves as a key partner for our end users in the analysis and implementation of solutions to develop their competence.
Our culture is to help and support our clients and partners in finding and developing solutions for their business.
The training programs are adapted to the candidates' background, where theory and practice are combined in the best possible way. During the training course, candidates will learn the full capabilities of wheel alignment stands (RUUK), balancing stands, tire changers, car lifts and brake stands.
We care about our customers and partners and their staff by focusing our training on their specific needs. Achievement of learning objectives is carried out through theoretical and practical training using optimal equipment work processes, established structures and standards to improve the quality, safety and profitability of service enterprises.
Professionally equipped seminar rooms, small groups and experienced trainers guarantee a high level of satisfaction for candidates who subsequently perform their work with increased efficiency and professionalism.
The aim of our training centers is to increase knowledge of Hofmann products :
Focusing on the effective use of products, methods and processes, our courses include:
CO Unternykirhen , Germany is equipped with the following Innovation products:
· Tires (Certified WDK)
· Balancies stands
· Ruuk
stands
well -trained techniques - the basis of any service station.
At the International Center for Training and Competence, our clients are trained by professional trainers.
APPLY FOR TRAINING
In June 2019 the new VAS showroom for sales and service opened in Babenhausen, Germany. It is equipped with the latest equipment for bodywork after accidents recommended by the Volkswagen Group. This training center has a RUUK stand with the functions of monitoring and calibrating on-board driver assistance devices, balancing stands, tire changers, lifts and linear dimension measurement systems.
The UC is located approximately 30 minutes from Frankfurt International Airport.
Put an application for training
Correggio, located in the Heart of the "Automobile Valley" of Italy, built in 2017, near the SNAP-ON production plant for garage equipment.
Seminars are constantly organized at UC to ensure the best training and continuous transfer of updated knowledge to our distributors.
