ATV Gravel Threaded Shaft Skid Kit - For Standard Blade P...
$ 15.95
ATV Plow Blade Control Flap - All WARN Plows - Cut To Size
$ 64.02
ATV Plow Blade Marker - 2 in. High Antenna - Red Rubber T...
$ 32.01
ATV Plow Electric Actuator Switch Kit - Replacement For P...
$ 62.05
ATV Plow Electric Actuator Wire Rope - Replacement For PN. ..
$ 18.20
ATV Plow Flange Extension Kit
$ 205.00
ATV Plow Lift Rope - 8 ft. - Synthetic Rope
$ 36.13
ATV Plow Plastic Wear Bar - 48 in. - 0.75 in. Thick
$ 60.26
ATV Plow Plastic Wear Bar - 50 in. - 0.75 in. Thick
$ 77.74
ATV Plow Plastic Wear Bar - 54 in. - 0.
75 in. Thick
$ 82.32
ATV Plow Plastic Wear Bar - 60 in. - 0.75 in. Thick
$ 82.32
ATV Plow Termination Strap - Replacement For PN[65510/67650]
$ 21.89
ATV Plow Wear Bar - 48 in. - Replacement
$ 37.01
ATV Plow Wear Bar - 50 in. - Replacement
$ 39.61
ATV Plow Wear Bar - 54 in.
- Replacement
$ 41.48
ATV Plow Wear Bar - 60 in. - Replacement
$ 43.50
Bronze Spacer Service Kit For UTV Plow - Replacement For ...
$ 30.77
Heavy Duty Plow Skids
$ 51.49
Latch Hardware Service Kit For UTV Plow - Replacement For...
$ 37.47
Latch Service Kit For UTV Plow - Replacement For PN[71983.
..
$ 57.72
Save $350
SKU: 04.US8-Rincon-650
Model: Rincon 650
Rincon 650
Rubicon 500
Rubicon 520 (2012+)
Variant
Rincon 650 - $1,699.
00Rubicon 500 - $1,699.00Rubicon 520 (2012+) - $1,699.00
Share this product
Best selling nordic mid-mount v-plow kit. Heavy-duty 71" wide snow plow kit fits the following Honda Rincon and Rubicon ATV models - please note which exact model you have when ordering:
Honda Rincon 650 / 680 - with adapter p/n 03.1200
Honda Rubicon 500 & 520 (2012+) - with adapter p/n 03.3200
Front fitted winch required to lift and lower the plow (not supplied with the plow kit)
The snow plow kit is delivered as 3 packing units in carton boxes, which consist of a pre-assembled V-plow blade (p/n 34.3800), pre-assembled V-plow mid-mount push tube (p/n 34.2200), and the mounting adapter/mounting plate (p/n 03.1200 or 03.3200 - depending on the vehicle model it's ordered for) to install your vehicle chassis.
Iron Baltic mid-mount snow plow system is designed for users that require a heavy-duty and reliable plow for serious work with ATVs and UTVs.
The plows have been designed for the toughest jobs like clearing snow or pushing sand, dirt, gravel, and other solid materials.
Plow kit has been designed to use with the vehicles on wheels, if you require a kit for snow tracks fitted vehicles - let us know prior to making your purchase (option is available at additional cost).
V-plow height extends from 15 to 23 inches towards the outside edges, making it possible to move larger snow amounts faster, both blade sides are individually adjustable through the working angle positions from a "V" position to an upside-down V position.
Impact reducing springs helps the plow move over small obstacles without breaking.
Working height adjustment.
Curved design provides better snow and dirt roll-off at any angle.
Heavy-duty, powder-coated or galvanized steel constructed V-Plow to use with the UTV / SSV machines or also with 4x4 ATV-s.
Product is available delivered free of charge within 48 states of USA from Iron Baltic´s fulfillment warehouse in Kansas, USA.
Shipping (LTL) is available also to Canada but additional fees may apply (please check to confirm when ordering).
ORDER NOTES:
Please write your vehicle Model and Year to Order Notes on your shopping cart!
3D Product View
Click here to read more:
ATV and UTV V-Plow systems
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Mini-all-terrain vehicles have recently become increasingly popular among fans of extreme sports. If you also have a plow for an ATV, then this small SUV will not only be a way to get an adrenaline rush, but also an indispensable assistant in cultivating the land of the site where your garden is located.
This technique originally appeared as a means of entertainment, and it served for traveling over rough terrain, overcoming hills, water obstacles and off-road.
A wheeled tractor was taken as the basis, only, unlike it, the SUV was already initially created more maneuverable and stable.
The off-road vehicle was calculated not for plowing hectare areas and transporting multi-ton cargo, but specifically for the needs of one person. Even the smallest ATV has a few horsepower.
ATV trailers and attachments easily transform them from off-road racing and overcoming obstacles into conscientious hard workers.
All this will significantly increase the efficiency of processing your site, where a garden house or cottage is built. Having fully understood and mastered all its possibilities, you will no longer be able to imagine how you managed without it before.
ATV, if desired, will not only allow you to have fun while riding it, but also significantly help in the household. It will not only save your labor costs, but also save a lot of money. With the proper trailer and attachments for it, you can perform the following work:
Plowing and harrowing of the earth is required for anyone who has a private plot. Moreover, allotments can be located in places where an ordinary tractor simply cannot climb or cannot fully plow them due to the small area, because it simply has nowhere to turn around. The strength and agility of this machine come to the rescue.
ATV plowing tool is designed as a conventional cultivator for commercial-scale agricultural tractors. Only it is smaller and consists of one knife, a maximum of two.
The blades are mounted on a trailed frame supported by one or two wheels (depending on the chosen design), which can be raised or lowered as required by a winch mounted on the ATV itself. The frame is attached to the ATV. Its connection occurs with the help of a towbar.
ATV plow, like all such earthwork tools, consists of:
ATV plow blade is made of extra strong steel and has different sharpening depending on the chosen angle of deepening and turning of the raised ground.
When the plow moves, the cropped land is lifted by leaning on the working plane, the dimensions of which are selected depending on the desired plowing depth.
The blade is followed by a plowshare that begins to turn the soil layer. It is usually made in a curved shape, especially for turning the turf.
Next comes the blade itself, which is a plate that finally turns the soil by 180°. The whole structure is mounted on a rack attached to the frame. The frame is attached to the ATV.
Special disc coulters can also be attached to this structure to facilitate the plow's entry into the soil and its further loosening. There can be one or two of them, and they can be located in front or on the side directly from the plow itself.
As a rule, organizations selling this equipment immediately offer all additional accessories in the kit, allowing you to make the most of its capabilities.
Of course, an ATV plow bought right away is the best solution, but you can make it yourself using just a few steel parts.
Starting to make a plow for an ATV with your own hands, first of all, you need to take into account the fact that high-quality plowing of the land occurs when the knife is deepened by 20-25 cm in length. In this case, serious loads will fall on the entire structure, including the friction force.
The plow and all its parts in contact with the ground (to maintain the necessary strength) must be made of iron with a thickness of at least 3-5 mm.
Share and knife are removable for timely replacement or sharpening. For their manufacture, it is best to use alloy steel of at least grade 9XC (it is used for the manufacture of circular saw blades). You can also use 45 steel with a hardness of HRC 50-55.
Blade can be made from an iron pipe with a diameter of 500-600 mm:
Remember:
Countersunk screws are used to connect all parts. Holes for them and threading are made in such a way that they provide a tight articulation of the parts, but make it possible to adjust the angles of the structure if necessary.
The exact dimensions, shape and angles of all parts are calculated based on the model and power of the ATV and the characteristics of the soil to be cultivated.
If the power of the all-terrain vehicle allows, then after the plow you can immediately attach a harrow. Then after the passage you will get a ready area for planting horticultural crops.
Tillage with an ATV and a plow, made or bought, is not at all like cultivating with a tractor or walk-behind tractor.
This is an exciting activity comparable only to racing through the fields. You will get a lot of unforgettable sensations and make your life much easier, ennobling your garden at the same time and increasing the productivity of the land.
Reviews and comments on article
Today, ATVs are very popular in the modern world. This is a small vehicle that looks a bit like a motorcycle, but the ATV has more than 2 wheels. Trunk - the luggage compartment of an ATV, it is designed to carry the necessary things. Panniers can be front and rear, rear panniers are more popular.
Such wardrobe trunks cost a lot separately, so now I will tell you how to make such a wardrobe trunk with your own hands, while saving a lot of money.
In order to create a homemade trunk you will need:
- Foamed plastic or hard foam, there is not much difference here, you can choose any one, the thickness of which will be at least 10 mm, 6 mm can be on the bottom
- Glue for plastic
- Self-tapping screws
- Metal ruler (approximately 1-1.5 meters)
- Bulgarian
- Tools for fastening and fixing
- Screwdriver
If you do not have special tools for cutting plastic, you can take a regular stationery knife or blade. ATTENTION! if you cut plastic with a blade, wear a glove on your working hand, there are many cases when people cause mini-injuries to themselves by cutting themselves on the edge of the plastic.
To make your own ATV case, follow these steps:
1. The first step is to cut out the bottom for your future case. To do this, you need to measure the area where you want the trunk to be located, then all measurements must be transferred to foam or plastic and cut the bottom according to measurements using a grinder.
All precautions should be observed, first of all, protect eyes, hands, clothes during work.
2. Once we have finished making the bottom, we need to make the side walls of the trunk. To do this, we measure again and, having received the necessary parameters, we transfer them to polystyrene or plastic and cut out the necessary pieces from polystyrene or plastic. Next, we fix them well to the bottom with screws and glue.
3. After gluing the side walls, it's already starting to look like a trunk, the next step is to file all the edges so that we get smooth and even corners of the case.
4. Next, after processing the corners, we proceed to the lid of our trunk. In order to make the trunk lid, we again go to foam or plastic, measure the almost completed wardrobe trunk and transfer the resulting dimensions of the lid, cut it out with a grinder, observing all precautions. After we have received the desired piece of foam or plastic, we attach it to the already made wardrobe trunk with the help of hinges that are used in door structures, you can also use other materials for fastening at this stage, because the hinges can take up an amount of space in your case.
5. Now you have attached the case cover, at this stage you have already got a full-fledged case, but for the beauty and attractiveness of the trunk, as well as to match the color of your ATV, you should give the trunk a beautiful look. There are many options here on how to do this. You can paint it in the color of your ATV, you can paste over it with a film and there are many such options, but the choice is yours!
In addition to the hinges we used to secure the lid, other fastening materials can be used to secure the lid.
Also, for convenient storage and transportation of various substances and materials, the wardrobe trunk can be divided into several parts, sections.
The most important thing in this business is not to be afraid to fantasize and experiment.
Do-it-yourself wardrobe trunk is suitable for unoccupied people at a certain point in time, because. for the manufacture of a high-quality trunk for an ATV, it is worth considering that a lot of time will be spent.
