Tire swings are ideal ways to spend a lazy afternoon at your garden, with your favorite book on one hand, and feet off the ground. While a gentle swing has a tranquil effect, fast and rapid swings are for an adrenaline rush, like you have never felt before. You can either place the tire vertically or horizontally, but the fun is ensured in both cases.
Tire Swing Ideas
1. How to Make a Tire Swing
If your place has a garden, utilize a wide branch of a large tree to hang a tire from. Nylon ropes are sturdy enough to use for this.
Tire Swing
Now, once you are done with one tire swing, suspend a few more to have fun together with your family.
Image of Tire Swing
2. Tire Swing with Chains
When you use chains, secured with eye bolts, it ensures the much-needed protection from suddenly breaking off the swing. Still, keep it lower if it is your first attempt to make this.
How to Make a Tire Swing
How about adding some colors for a vibrant appearance? Spray paint or use some waterproof shades, so that the colors won’t flake during rainy days.
Tractor Tire Swing
However, instead of changing the entire get-up of the tire, you can just add a single white border with acrylic paint and finish off with a paint sealer.
How to Make a Tire Swing with Chains
3. Polka-Dotted Tire Swing
Since recycled tires are affordable solutions, you may use your saved money for painting polka dots on them for a peppy look. Place two or more side by side so that your kids and their friends can swing together.
Tire Swings
4. How to Make a Horse Tire Swing: DIY
Build a pony out of a tire and see your little one’s happiness. All edges must be smoothened, minimizing the chances of minor cuts.
Horse Tire Swing
5. Yarn Draped Tire Swing
Wrapping a tire with colorful yarns changes its ruggedness instantly.
Light shades like peach, pink, white, and beige are likely to fade away soon, but they have an eye-catching look, more than black, brown and other dark shades.
DIY Tire Swing
6. How to Build a Tire Swing
When you want both the softness of the rope and the sturdiness of a chain, drill a wide tire and insert rope just as shown in the tutorial. Instead of tying the rope, this is a better way to dangle your tire. Moreover, your kid might hurt himself by the chains if they become rusty. So rope is safe.
How to Build a Tire Swing
The same tutorial is applicable even if you have a smaller tire. The two strands of rope give you a proper grip and you may rest your back on them. If possible, add a wooden surface by drilling the bottom and place a cushion so the horizontal swing becomes a more relaxing affair.
Horizontal Tire Swing for Playgrounds
7. Plastic Tire Swing
Plastic tires are light, so the process of building one swing with this would be easier for you.
Check out the instructions and grab your kits.
Plastic Tire Swing
8. Chair Tire Swing
A single tire can be transformed into a chair swing with handles and a surface to sit on. It might sound unbelievable but it is super easy and a fun task too.
Tire Swing for Trees
9. Monochromatic Tire Swing for Kids
Following a basic tutorial, you can get such a vertical swing, where you can slip on easily and enjoy the night sky illuminated with starts.
Painted Tire Swing for Kids
10. Homemade Tire Swing
Woss gears make it easier for you to install a tire from a tree. The inexpensive tools are user-friendly as well.
Homemade Cool Tire Swing
11. Blue Tire Swing
Place a vertical swing beside your porch so that you can always watch your kids while you engross into knitting.
Making a Large Tire Swing out of a Tire
12. Tire Swing with a Thick Knot
Tie a thick knot like this and hang the tire from a heavy wood tree branch.
How to Make Your Own Vertical Tire Swing with Rope
13. How to Build a Tire Swing without a Tree
This tire is like an extension to your readymade swing set. Change your sit once in a while with your partner and enjoy the ride.
How to Build a Tire Swing Without a Tree
Recycling old objects is a sensible approach towards nature. Moreover, making such swings doesn’t affect your budget. Paint it, hang it, and enjoy your homemade swing.
Keep ’em chocked and keep ’em from rolling away.
Your trailer tires will tell you how much weight they can carry, and how to inflate them properly.
This will let you know if the tires are wearing unevenly.
A penny can tell you if the tread is worn and needs replacement.
It’s ideal to cover all of the tires, and the spare, to protect them from UV light. Saves money!
Replace tires every three to five years anyway, even if they seem fine.
A dacha is not only a site where it is necessary to take care of the beds every day and harvest on time. This is a place that can open up the creativity of the owner. In this article we will talk about what crafts from tires for the garden you can do with your own hands.
Throwing away such a valuable material for various crafts is not worth it. There are enough options for how they can be disposed of in a mutually beneficial way.
You can not only decorate the yard or make interesting obstacles in the children's corner, crafts for the garden from tires with your own hands can also bring practical benefits.
A used car tire in the right hands can become anything. You just need to have a sharp knife and chalk in your hands for marking. You are unlikely to experience a lack of material, since a sufficient amount of it constantly accumulates at tire fitting.
Consider the positive properties of crafts from them:
| Cost | Usually the price of used tires is either very low, or they are just given away for free. |
| Time and tool | From the tools you will need:
Work usually does not take much time, since all crafts are quite easy to make. |
| Structural stability | Car tire is designed to withstand all weather conditions. The only negative is that it gets very hot in the sun. Therefore, consider this circumstance when you make products from tires for the garden, for example, furniture and elements for the playground. |
| Maintenance and service life | Virtually maintenance free, just wash with soapy water. The service life of such products is quite long. |
Tip: before starting work, draw the outlines of the future product on paper and you can immediately start marking and cutting the tire.
What do-it-yourself garden crafts from tires you can make:
This is perhaps the most common product made from old car tires.
You can simply put it on the ground and cover it with soil on which to plant your loved ones. We invite you to be creative in this process.
Prepare:
The instructions below will help you understand the process:
Advice: it is better to invite an assistant for this work.
Gradually turning it in a circle, immediately fix the bent elements.
If it is assumed that the flower bed will be without a stand, cover the bottom with plywood or tin, then the earth will not leave it.
Various additional accessories can give it an interesting look, for example, old shoes painted in the same color and installed nearby.
When you have several old tires of different sizes, you can make a multi-story flower bed. In this case, the top can be an old basin or a large flower pot.
Before assembling the whatnot, paint the tires beforehand, because it will be difficult to do later, and then assemble the tiers. Also make a bottom for each tire, otherwise the soil will sag. Such a flower bed can be used for flowers or for growing strawberries.
Tires stacked in a checkerboard pattern will be interesting. Bright and saturated color is obtained after priming the surface and applying paint in two layers.
Practical crafts for the garden from old tires will also be of interest.
Consider two options:
In addition, by the time you get to the house, all the dirt will already fall off your shoes.
These are easy to make - cut the protectors and nail or screw them onto a few cross bars.
A cheap and practical option is a garden ottoman made from an old car tire. Although they are somewhat hard and heavy, they are quite easy to make. In order not to suffer with dragging, select a place for them on the site in advance.
The use of obsolete old items, in particular car tires, allows you to transform the suburban area. The models presented today are only a small fraction of what can be made from them. Stock up on creativity, patience and invent an original item for your site. The video in this article will help you find additional information on this topic.
Do you have a garden or vegetable garden and old waste tires? Then you just have to make a cute craft. It will become the pride of your site if you do everything diligently and accurately. No special financial costs are required for this, but the time is needed from a couple of hours to a couple of days.
Now let's move on to more labor-intensive tire crafts. In fact, they are only slightly more complicated than the previous ones. You will see for yourself when you get acquainted with the master classes.
Making a swan
Manufacture involves cutting, so it is best to use very worn rubber with a longitudinal pattern. The first stage of work is markup. Draw a swan's neck on the tire as shown in the photo. It should take up approximately half the length of the tire. Next, draw the outlines of the head (about 10 cm long) and the beak (slightly shorter). The tail will begin where the beak originates, and therefore will have a forked end.
Make it the same width as the neck, and let it be about 30 cm long.
Now it's time to move on to cutting. Depending on the condition and thickness of the rubber, do the work with a shoe knife, grinder or electric jigsaw. Cutting on both sides of the tire is best done in parallel. Having finished cutting, we proceed to turning the workpiece.
Tire swan — master classThe next step is to strengthen the neck and tail. To do this, along these parts, make two holes every 15 cm. In them you will thread metal brackets that will hold a hard rod. After that, the neck and tail need to be given a beautiful bend.
The final stage is painting. You can make yourself either a white or a black swan. Let the beak be red. That's all.
Glam pot
We have previously looked at simple flowerpots made from tires for the garden plot. Now turn your attention to a more complex and attractive option. Draw a gigzag line on the tire and cut along it.
When finished, turn the tire inside out. The cut off part usually serves as a stand. Now take some outdoor paint of any color and finish your flowerpot.
Silent lake
Today, people are trying to decorate their yards, summer cottages and gardens with whatever they can. Designers received a lot of ideas that can be safely translated into reality. The use of improvised materials such as bus tires has led to the fact that real hand-made masterpieces are located in the gardens and gardens of the plots.
It is worth noting that crafts for the garden and garden can embellish any area. It can even be a sandbox in the yard, a flower bed, a swing or beds.
For example, to make a flower bed from a car tire, you do not need to guess too much. A bus tire is simply taken, covered with earth. But it won't be a masterpiece. Now, if you take paints, decorate the tire from the outside, and even better - put three wheels - one on one - then you get a real masterpiece.
If you want to do something unusual, then you can take tires of different diameters. With the largest one, we begin to lay out the rubber from the bottom.
You can even fix an impromptu flower bed on a tree. To cover the tire on one side, you can use any material that can withstand the weight of the earth.
Fantasists even came up with two cups that are made of tires and stand on the site. The main bowl is cut out, and the handles can be metal tape.
Another idea - figures of animals from used car tires. They will give mood to your guests in the garden or in the garden.
The most popular figurine in garden crafts is a swan. To make a bird, you need a tire that does not have a metal cord.
This will make it easier to cut rubber. We make the markup of our future crafts. We cut the tire with a very sharp knife or hacksaw.
To strengthen the swan's neck, use metal rods. At the end we color the bird.
You can make a turtle, a zebra and even a horse out of old car tires. To make a beast, you need to dig a bar into the ground along with a tire. In order for the animal to look like itself, it is necessary to give certain colors with paint.
Furniture made from car tires will look great at their summer cottage. You can even make comfortable options using various soft linings. Everything that can be useful in this craft is used. If you like to relax in the garden in the evenings, then a few personal chairs that can be placed close to each other are best suited.
There can be no difficulty in making crafts. We fantasize, and it will take you no more than an hour to do everything. It is unnecessary to take thick and rough tires, the reinforcing fiber of which can cause wounds.
Each of us remembers swings from car tires in the garden since childhood.
Pastime then could not do without a swing. And now you can do it with your own hands from old tires. It is worth noting that a swing made of tires will be safest for a child than a swing made of wood or metal. So what do you need to make a tire swing? First, we find a branch that will be strong and will be tilted towards the ground. Secondly, we collect such tools: a knife, a hacksaw, a rope or chains and the tires themselves.
Make a loop at the end of the rope. You need to make sure that the knot is strong. We put the tire vertically. The rope is passed through the wheel, firmly tied above the ground at a height of a meter.
The real fun for kids is the tracks and the different paths that can be made from tires of different sizes. You can make a regular track on the site out of tires. To do this, you need large tires - for example, from a truck. It is only necessary to cut off the part with the tread, and then spread the strips on the site, additionally fixing them to the ground.
As we noted earlier, a variety of improvised materials are used for modern applied art, you can even make crafts from old car tires for the garden and summer cottage.
It would seem, how else can an old car tire serve?
But having shown your creative abilities, you can create truly masterpiece works of art. We will talk about them in this article.
Using old “car rubber”
Despite the fact that tires that have worn out over the years have an unsightly appearance, many unusual and original things can be made from them.
The service life of such crafts for the garden is quite long, since rubber is a durable material that endures temperature changes and dampness.
In addition, rubber is easy to process and can take the most bizarre shapes.
Tires were previously used to fence playgrounds or flower beds. They could cover the ground and grow a variety of plants.
Now, having spent a little of your precious time, you can make a flower bed of tires, figures of various animals (swans, elephants, horses, parrots, turtles, etc.), children's swings or sandboxes, decorative statues, flowerpots for flowers, fitness equipment and much more.
Main, old tires is a very affordable material that can be found at the nearest bus station.
Figurines of white swans look very beautiful and original at their summer cottage. To make such a swan, you will need a car tire, grinder, knife, foam or wood, a piece of tin.
Before you make such a craft from tires for summer cottage , you must thoroughly wash the tire and let it dry. Then a strip is cut out of it with a grinder, which will serve as a swan's neck.
It takes up a little more than half of the tire. Now the tire needs to be turned out.
Take a piece of tin (1-2 mm thick) and cut a strip from it to fix the swan's neck. You can fix it with riveting or self-tapping screws. Now the neck needs to be curved.
The swan head can be made from any material at hand, such as foam and tin. We fix the head in the same way as the neck. When the craft is ready, it remains only to paint.
You can make such a beautiful caterpillar on your site for the delight of children . You will need 4 ordinary tires, 2 plastic can lids and a metal bar.
Tires should be dug into the ground at different levels in ascending order, then painted green. The caterpillar antennae are bent from a metal bar and fixed to self-tapping screws. "Eyes" must first be painted and dried, and then also fixed on self-tapping screws.
For the playground, you can make a lot of crafts from old tires with your own hands.
For example, your children will be very happy with the small swing . To do this, you need to fasten the tire as a seat for metal chains to the pillars. It looks like this.
The tire can be used together with the wheel to make flowerpots.
You will apply a pattern on it (scales, teeth or wave), which you will cut along the contour with a grinder or a construction knife. Now the tire needs to be turned inside out. It should be noted that this process will require significant effort from you.
After this procedure, you will have a very beautiful vase, in which the wheel rim serves as the base. To give the flowerpot a more aesthetic appearance, it must be painted with facade paint. You choose the color according to your taste.
But such a bunny can decorate the front entrance of your country house . Making such crafts from wheels takes time and effort, but you will be satisfied with the result.
You will need two tires of different diameters (one for the body, one for the head), linoleum, pipe, plywood or wood, thick rubber and exterior paint.
The body and head of the bunny are connected with a pipe. The holes in the tires are cut with a grinder. On the section of pipe between the head and the body, it is necessary to drill a hole in the pipe for easier assembly and transportation. A bunny bow is cut out of iron or wood and fixed to a hairpin in a drilled hole.
Plywood is attached to the tire rim using self-tapping screws. At the same time, the plywood is lubricated around the circumference with a sealant for strength. Linoleum is glued on top of the plywood sheet using liquid nails. From the inside, the same sequence of procedures is done.
Paws (front) and ears are cut from thick rubber. You can use all the same tires for this. For support, two tires of medium diameter are used as hind legs, which are dug into the ground. Now you can start painting.
