Having dull, tired and grey looking tires is one of the easiest ways to ruin what would otherwise be a freshly detailed car. So how do you make your tires look brand new?
It’s actually pretty simple, and doesn’t take too long either. In this article, I’ll take you through the essential steps to make your tires look brand new in under 15 minutes. So let’s get started.
To make brown or dull looking tires look new again, clean them using an all-purpose cleaner or dedicated tire cleaner with a hard bristle brush, then rinse. Wipe with a damp microfiber towel and repeat the process until there is no transfer onto the towel. Dry, then apply a tire dressing.
If you’re tires and looking dirty and tired, then the first step to making them look new again, is to give them a good clean.
This can be pretty hard work, and if I’m honest, it’s one of my least favourite parts of detailing a car. But it is essential if you want your tires to look shiny, and the overall car look much newer.
If you can’t remember the last time you cleaned your tires, then this step make take a little longer than if you maintain them regularly. So here are the steps to deep clean your tires.
If you have a pressure washer , then now’s the time to dust it off and get it out of the garage. If you want to dramatically cut down the time it takes to clean your tires, then the wet wash can help a whole lot.
Use a fan-type nozzle and spray your tires down thoroughly. You can get away with using a pretty powerful setting, but use it at an angle and avoid hitting the paint or alloys to reduce the risk of damage.
Scrub the Tires with an APC or Dedicated Tire Cleaner Next, you’ll need to give the tires a good scrub. I use a hard bristle brush to do this. Make sure it’s not too wide though that you’re touching the alloys because it will scratch them.
Car shampoo isn’t strong enough to remove the grease and grub on your tires that has built up over time. So I recommend using an all-purpose cleaner designed for cars or a dedicated tire cleaner. Make sure you wear nitrile gloves to protect your skin.
My favourite products for this are:
You’ll want to give each tire a good scrub and then rinse it down again using the pressure washer.
Link to the brush I use: In2Detailing Tyre Brush.Another really great way of getting the grease and grime off your tires, is to use a microfiber towel.
This needs to be an old one that you have absolutely no intention of using for any other purpose.
You cannot use the same microfiber towel anywhere else on your car after you’ve used it on your tires.
Give the tires a good wipe down using a damp microfiber towel and you’ll notice loads of extra dirt getting removed.
Unfortunately, this process can take a while because it needs repeating a few times. Unless your tires have been regularly cleaned, you’ll probably need to repeat this process at least 3 times on each tire before moving onto the next step.
Ideally, you want as little black transfer on your microfiber towel as possible before quitting.
Okay, so now your tires are squeaky clean, you can move onto the dressing step. This is essential to give your car the shiny, wet-look that makes them appear brand new, even when they may be years old. It also protects them from the elements to prevent drying and cracking over-time.
I personally use the Garage Therapy Tyre Serum which is more than just a dressing as it conditions the rubber as well.
After the first few times of applying it, I noticed that the tires stayed much cleaner between washes and still repelled water.
Here is a link to the Garage Therapy /ONE: Tyre Serum.
You can also use a foam or microfiber applicator to apply the product.
Okay, so now you know how to get your tires to look brand new again. Here are some FAQs you may still have about detailing your wheels.
The tires should be deep cleaned using an all-purpose-cleaner or dedicated tires cleaner every 2-3 months on average. Maintenance cleaning is best performed every every two weeks, by using a softer brush and car shampoo, rinsing and wiping with a microfiber towel. Then the tires can be dried and a dressing applied.
Unfortunately, these tire dressings don’t last as long as you might think. Although most tire dressings claim to last up to a month, I’ve found that they last around a week.
The Gtechniq T2 tire dressing lasts around 2 weeks when you prep the surface properly. Whereas the Meguiar’s dressing lasts around 1 week.
You can get the best durability by ensuring the tires are squeaky clean before applying the dressing. This dramatically increases the time they last for. If you apply a dressing to a dirty tire, you’ll be lucky to get a couple of days worth of shine.
Giving your tires a jet wash, and reapplying a small amount of tire dressing each week is generally going to get your tires looking pretty good most of the time though.
The best way to revive tires that have browned, is by rinsing them and cleaning using an all-purpose-cleaner or dedicated tires cleaner and a hard bristle brush, wiping with a microfiber towel, and then repeating around 5 times.
Brown tires can be a pain, but if you follow the steps above, then you should get them looking pretty good again.
It’s very hard to get them to look black again without a tire dressing though. Often the browning occurs over time, so if you have new tires, make sure you look after them!
So I always recommend a deep clean, followed by the Garage Therapy Tyre Serum which will help to condition the rubber and protect them from browning further.
Thanks for reading! I hope you’ve found this article helpful. Don’t forget to check out the rest of the blog to learn more about getting your car to look it’s best!
Leave a comment
Categories Car Care by Editor
“This post contains affiliate links, and I will be compensated if you make a purchase after clicking on my links.
”
After many days of using the car on different roads, your tires are not as shiny as the first day. Tires will worn, pale and even cracked after a period of use. How to make tires black again without having to change them? Do you want better tires and still keep your tire quality? We will answer in this article.
How to make tires black again
Contents
Tires are the direct friction against the road surface. After a period of use, discoloration and cracking will occur, losing the grip of the tire. Besides, the road surface has worn out tire spikes after a period of use.
The rubber material of tires has very good elasticity. But over time, the abrasion of tires causes rubber surfaces to lose friction. This is dangerous for the driver.
Blackening tires also have a lot of technical benefits. When the tires are black, you can prevent rubber cracking early. When the tire is well cared for, the toughness and durability of the tire increases. Moreover, you will not encounter a tire explosion or deflated tire when using.
Blackening tires for aesthetic reasons. When the tire faded, it looked no longer shiny and less luxurious. Glossy black tires contribute to making your car look new and more luxurious.
The chemicals used to make tires black again
The simplest and most common way is to use oil. Oil is an easy-to-use, cost-effective substance. How to black tire oil is simple. You need to clean the tire, wait for the tire to dry and apply oil on it. But, this way has some limitations.
Oil adhesion on tires is not durable. After a short time, the oil layer drifts after contact with the water. If you do not have the experience, you will make them appear slippery when traveling. Currently, on the market, there are many types of specialized tire polishing solutions.
These types are very diverse with many prices. You can choose the product that suits your economic conditions. These substances often have many effects on tires. For example, making the car more glossy helps prevent cracking on tires. Some also work against harmful UV rays from the sun.
Besides, there is a substance called young rubber (also known as silicon) to black the tires. This is a substance used in car repair shops. They use it to patch tires when the tires punctured.
This substance also works to black the tires when you put them into a solution. But, if you have no experience with vehicles, you should not use this method. If used in the wrong dosage, this substance will make the tires harder and more damaged.
The exterior of the vehicle and especially the tires will cling to a lot of dirt after use. The dirt clings a lot to your tires. Thus, you should clean them before refurbishing. Besides, when the tires clean, the chemicals will grip and keep the color longer.
Clean the tire before blackening
Remember to clean the tire grooves. Those are the places that get the most dirt. It is very important to note that you should not use brushes to clean tires. The brush will scratch and abrasion the tire, the tire will be more likely to damage. Use water spray instead. You should use a high-strength special nozzle. If not, you can use a regular hose and grasp the end of the pipe to increase the force of water.
After making sure your tires are completely clean, let the tires dry. Then use some type of gel or tire balm. These act as a lining to protect your tires.
After these substances dry and completely stick to the tire, move on to the second step.
Depending on the type of chemical you use, they will have different uses. Some solutions need to mix with water, some solutions can spray on the tires. You need to follow the manufacturer’s instructions. The manufacturer-guaranteed ratios ensure that your tires are glossy black. Do not overuse chemicals, they will cause the opposite effect if you use the wrong dose.
Most tire blackening requires use with a brush or cloth. Notice that there is also a special brush for blackening the tires. Do not use regular brushes, they will not work in black paint tires. Some brushes also cause tire damage. Invest in an inexpensive specialized brush, you should invest them.
After blackening the tires, let the solution dry and have a firm grip on the tires. Some chemicals work right when you are doing them, some are dry before you have the gloss.
Besides, do not use the car immediately after you proceed to black the tires. Let the tires rest for at least a day so that the substance can create a certain grip on the tires.
Do not abuse the tire blackener! You should not darken your tire too often. Use only when the tires are too worn out and degraded. If used too often, it will cause side effects. The chemicals will make your tires break down and reduce the life of the tire.
Beware of deceptive tactics on the market. Today many people abuse their love of glossy black tires to make money. They use low-quality tires that only blacken and look like new. But, after a period of use, these poor quality tires are easy to wear and dangerous to the driver. You choose to buy tires or tire blackening service at reputable establishments.
This article has covered how to black the tires and the chemicals used to black the tires. Don’t forget the notes at the end. Hope this article is helpful for you.
If you have any experience blackening your tires, do not hesitate to share them with us. Stay tuned, we will come back with a lot of other useful articles!
Hello, dear readers! Even from the simplest materials at hand, if desired, you can create incredibly attractive things. In today's review, we will talk about old, unused car tires, or rather, we will tell you what to make from tires. There are actually a lot of variations in the use of such tires, it can be swings, chairs, ottomans, garden decorations, flower beds, fences, and much more, details below. nine0003
Contents
Waste bin. A classic of the genre, traditionally old tires separate the area from the path to the flower bed or lawn. Cut the tire in half and bury the cut part in the ground. Such borders, if desired, can be painted in any shade or by showing a creative approach - draw flowers, cars, etc. nine0003
By cutting the tire in half and placing it on metal legs, you can get a rather interesting newspaper or magazine rack (whichever is closer to you).
A great idea for a fence - tires stacked on top of each other, covered with earth with planted climbing plants.
Children will be indescribably delighted with such a wonderful swing. The horse from the tire looks especially impressive (see photo below). nine0003
By cutting the tire in half and nailing a flat board to the cut part, you can end up with an excellent outdoor rocking chair for a child. But it can also be painted in the child’s favorite shade, and then he will spend a lot of time on it.
The next way to use tires, just like the curb, is considered a “classic”, you must admit, flowerbeds from old tires catch your eye everywhere - in small towns, residential areas, villages, kindergartens, playgrounds, etc. Below you can explore the various options for flower beds. nine0003
A wheel on a rope tied to a tree branch filled with food will serve as an excellent bird feeder.
But you can make a great chair out of tires, you can see different variations of chairs in the photos below.
Designers' imagination is really limitless - you can even make a ceiling chandelier out of tires.
Tires cut in half and dug into a row about 8 cm apart make an excellent bike rack.
The round cushion placed inside the tire is the perfect sleeping place for your cat or dog.
The simplest idea to implement - three or four tires stacked on top of each other, inside a large garbage bag, and in the end a great trash can. Painted wheels will look more interesting and neat. nine0003
Tires screwed to a wooden wall with a screwdriver make excellent wall beds.
First you need to flatten the tire by cutting it with a jigsaw, then using a pencil draw the outlines of palm leaves, which are again cut out with a jigsaw, and paint them green.
The resulting leaves are nailed to the trunks of obsolete trees.
The simplest idea to implement is to create a sandbox. Pour sand into a large tire to the top, install a beach umbrella in the center. At night, remove the umbrella and cover the sandbox with an awning, and so that it does not fly away when the wind blows, screw screws along the edges of the tire, and create loops on the tent itself.
Check out how gorgeous the hanging parrot flower bed looks. The tire is cut with a jigsaw, and according to preliminary marks it is painted with facade paint. nine0003
Holes are cut in the tire to fit the width of the folded umbrella, you can try to take large curtain eyelets and fix them on the rail. To prevent the tire from rolling around the room, attach wooden legs to it.
Great idea for a garden pond. A hole is dug to the size of the tire, the latter is covered with a dense film, a hose with water is lowered inside.
Along the edges, the tire is masked by all kinds of flat stones, moisture-loving plants are planted. At the end, the pond is filled with water. The whole process of creating such a pond can be studied in the photo below. nine0003
Tire ottoman decorated with rope looks very stylish. Plywood is nailed to the surface of the tire according to the size of the tire itself, then a rope is taken and glued to the sides and top of the future ottoman with glue. The whole process of creating an ottoman is shown in the photo below.
How do you like this washbasin, very original, isn't it.
Sometimes the site is not on a flat surface, but goes down a slope, so in order not to bother with concreting, you can use unnecessary tires, burying them along a steep slope, forming steps. nine0003
The miniature table turns out to be very beautiful. And how to make it yourself, you can find out by examining the photo below.
Craftsmen make really chic garden decorations from old tires, including: swans, ladybugs, cows, frogs, tea mugs, etc.
Today we showed you a lot of ideas on what can be made from tires. For a garden, a more practical and malleable material is hard to find, and what magnificent garden elements are obtained - a feast for the eyes! The conclusion is simple, in the presence of a summer cottage - worn tires should not be thrown away!
Sometimes improvised materials allow you to make a real masterpiece that will not leave anyone indifferent.
Old car tires help to beautifully decorate the path or make a neat flower bed for undersized flowers. Do-it-yourself tire crafts can decorate any landscape design. They allow you to diversify the surrounding space.
Our material presents a master class of tire crafts. Detailed instructions display all the subtleties of the workflow. nine0003
Brief content of the article:
Car tires allow you to turn the most daring ideas into reality. Dense rubber lends itself well to processing, painting and deformation. It is perfect as crafts for the garden and decoration of your garden. The main thing in this matter is to be careful and be patient.
What tools do I need to prepare for working with tires? For this you will need: nine0003
Small flower beds. Not every amateur gardener thinks about the beautiful design of his flower garden. Flower beds in the form of tea cups will help to diversify the design of the garden.
The base of the container consists of two pairs of tires of different diameters. Smaller tires are fixed from below, and a larger diameter is set at the top. The handle is cut out of an old tire and attached to the side with self-tapping screws. nine0003
You can complement the brightness with bright shades of colors. The finished flower bed is covered with soil and beautiful undersized flowers are planted. These designs will decorate your personal plot.
Animal figures. Such a decorative element will become a real decoration of your dacha. Crafts for the garden add a peculiar zest to the space. Children will surely appreciate this decor. Creative ideas can be borrowed from all your favorite animated series.
nine0003
Use accessories and tools to create a frog princess, a tin soldier or a beautiful stork. Artistic natures like more complex tire sculptures. For example, the Gorynych snake. Many small pieces of rubber perfectly imitate real scales.
Creative individuals will like multi-level structures made of rubber tires with ampelous flowers that will imitate a hedge.
Furniture from old tires. Agree that unusual furniture paraphernalia always looks unusual and even stylish. The simplest piece of furniture is an ottoman made of automotive rubber. nine0003
The main body of the tire remains as is. You can strengthen the structure with a plywood frame, which is located on the inside. The top hole is decorated with a wooden circle.
This ottoman will fit perfectly into loft or minimalist interiors. The surface of this design can be decorated with thick burlap.
Rubber swing. Such an invention delights not only children, but also adults.
The location of the swing will become a favorite place for most households. The main advantage of this material is its high strength. Rubber can withstand up to 80 kg. nine0003
For the manufacture of the structure, it is necessary to prepare a metal frame. If there is no such structure, then a large tree can be used as a support. The main requirement in the process of building a swing is the tight fastening of all parts to each other. Carabiner loops are screwed to the surface of the tire.
Old rubber track. Such a coating is suitable for decorating a garden and a vegetable garden. This will require 10 pcs. tires. The side parts of the tire are cut in half. Further, they are laid on the surface of the earth. nine0003
The main advantage of this paving lies in the low cost of materials. Such a track will last a fairly long period of time.
Surely each of us thought about the presence of a pool in the country.
The high cost of such a design is not suitable for every consumer. We bring to your attention a pool made from an old car tire with your own hands. nine0003
Making such a structure is quite simple. For this you will need:
Before starting the workflow, it is necessary to determine the location of the future pool. The fact is that the lower part is made of thin material that will not withstand constant movement. nine0003
The terrain must be perfectly flat and soft. You can use sand for this. When all the nuances are observed, you can proceed to the workflow. It includes:
The bottom waterproof film will be firmly fixed with the rubber base.
The pool can be filled the next day after the seams are completely dry. Experienced craftsmen recommend pre-testing the structure with 10 liters of water. If after that the liquid gradually leaves the vessel, then all contents must be removed. After that, all places are re-lubricated with a hermetic composition. nine0003
As you can see, everything is quite simple. The main thing in the workflow is to be patient and follow the instructions provided. The photo of tire crafts shows the best options for decorating a summer cottage.
