U.S. models
Instead of directly measuring the pressure in each tire, the TPMS on this vehicle monitors and compares the rolling radius and rotational characteristics of each wheel and tire while you are driving to determine if one or more tires are significantly under-inflated.
This will cause the low tire pressure/TPMS indicator to come on and a message to appear on the gauge.
The system does not monitor the tires when driving at low speed.
Conditions such as low ambient temperature and altitude change directly affect tire pressure and can trigger the low tire pressure/TPMS indicator to come on.
Tire pressure checked and inflated in:
The low tire pressure/TPMS indicator will not come on as a result of overinflation.
The TPMS may not function properly if tire type and size are mixed. Make sure to use the same size and type of tire.
Checking TiresTire and Loading Information LabelTire LabelingDOT Tire Quality Grading (U.S. Vehicles)Wear IndicatorsTire Service LifeTire and Wheel ReplacementTire RotationWinter Tires
The low tire pressure/TPMS indicator may come on with a delay or may not come on at all when:
The low tire pressure/TPMS indicator may come on under the following conditions:
The Vehicle Stability AssistTM (VSA®) system, brake system (Amber), Adaptive Cruise Control (ACC) with Low Speed Follow, low tire pressure/TPMS and safety support indicators may come on in amber along with a message in the gauge when you set the power mode to ON after reconnecting the battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your vehicle checked by a dealer.
You must start TPMS calibration every time you:
Before calibrating the TPMS:
Make sure:
Models with 7-in. Color Touchscreen
When you calibrate the TPMS, do the following.
Switching the Display
Models with 9-in.
Color Touchscreen
When you calibrate the TPMS, do the following.
Audio System Basic Operation Start Up Audio/Information Screen
The calibration process requires approximately 30 minutes of cumulative driving at speeds between 31-62 mph (50-100 km/h).
During this period, if power mode is set to ON and the vehicle is not moved within 45 seconds, you may notice the low tire pressure indicator comes on briefly.
This is normal and indicates that the calibration process is not yet complete.
If the tire chains are installed, remove them before calibrating the TPMS.
If the low tire pressure/TPMS indicator comes on even when the properly inflated specified regular tires are installed, have your vehicle checked by a dealer.
We recommend that the tires be replaced with the same brand, model, and size as the originals. Ask a dealer for details.
The recommended tire pressure for a Honda CR-V is 32 pounds per square inch (PSI) for front tires and 30 PSI for rear tires.
Ensuring your tires have the correct air pressure is key to your safety on the road. Improperly inflated tires can lead to premature tire wear, decreased fuel efficiency, and decreased steering control, all of which can increase your vehicle costs down the line.
In this article, the top-rated
car insurance
app,
Jerry
, will go over everything you need to know about Honda CR-V tire pressure. Keep reading to find the right pressure for your model, learn how to check your tire pressure and reset the dashboard warning light, and even get some tips on lowering your
Honda insurance cost
!
What is the right tire pressure for a Honda CR-V?
In most models, the recommended tire pressure for a Honda CR-V is 32 psi for the front tires and 30 psi for the rear tires. To confirm the PSI for your Honda CR-V model, you can check the sticker on the interior of the driver’s side door or your owner’s manual.
The exact tire pressure for your CR-V may vary slightly depending on the model you drive. For example, the
Honda CR-V EX-L
and EX models have a recommended tire pressure of 33 psi for the front tires and 30 psi for the rear tires.
Another factor to consider in your tire pressure is the type of tire you use. If you’ve added high-performance tires, summer tires, or changed the wheel size on your CR-V, you’ll need to set up your Honda with the correct pressure specifications.
Tire pressure recommendations for other Honda vehicles
Vehicle | Front tire pressure | Rear tire pressure |
|---|---|---|
2022 Honda CR-V | 32 psi | 30 psi |
2022 Honda Accord | 32 psi | 32 psi |
33 psi | 33 psi | |
2022 Honda Odyssey | 35 psi | 35 psi |
2022 Honda Pilot | 32 psi | 32 psi |
2022 Honda HR-V | 32 psi | 28 psi |
How to check Honda CR-V tire pressure
If you’re unsure how to check your tire pressure, we’ve got you covered.
Depending on the model year of your CR-V, the Tire Pressure Monitoring System (TPMS) in your vehicle may notify you that your tire pressure is low via the
tire pressure warning light
.
If your Honda isn’t equipped with that technology, you can check your tire pressure the old-fashioned way! Simply remove the valve stem cap on each tire and insert a
tire pressure gauge
onto the valve stem.
The gauge will display the pressure of each tire, which you can measure against the recommended tire pressure and add or remove air as needed. Tire pressure gauges can be used at home or at a gas station’s air-filling station.
While both TPMS and air pressure gauges are helpful tire pressure indicators, your vehicle may also display certain symptoms to tell you that your tire pressure is too low. If you notice your CR-V has decreased in performance or you’re experiencing difficulty steering or an uneven ride, you may need to refill your tire pressure.
How often should you check tire pressure?
It’s recommended that you check your tire pressure once a month or before you head out on any long trips.
How to tell if your Honda CR-V needs new tires
You should swap out your Honda CRV’s tires every six years. However, if you notice low tread depth or cracks and bulges in your tires, you’ll need to change them sooner.
When in doubt about your tread depth, use the penny method: stick a penny Lincoln’s-head-first into the tread. If you can see the top of the head, it’s time to get new tires.
How to reset the Honda CR-V tire pressure monitoring system (TPMS) light
If you’ve refilled your tires with air but the TPMS warning light is still illuminated on your interface, you may need to
reset your tire pressure light
.
Before you initiate the calibration process, make sure your vehicle is at a complete stop with the shift lever in P and the ignition switch ON.
Next, look for the “TPMS Calibration” button on the driver information interface, located under “Clock and Vehicle Settings”. Once you’ve selected “Enter,” a “Calibration Started” message should appear on your screen.
Next, you can take your vehicle out for an approximately 30-minute drive at 30-65 mph to recalibrate the system. The calibration process will complete automatically.
How to save on Honda CR-V insurance
Keeping up with regular vehicle maintenance, like maintaining the right tire pressure, is a surefire way to save on car-related expenses. By regularly inspecting your tire pressure, you’ll avoid potential costly blowouts, breakdowns, and accidents.
Another easy way to save on ownership costs is to use the
Jerry
app to lower your Honda CR-V car insurance cost! As
a licensed insurance broker
with dozens of partner companies, Jerry can find you competitive quotes for Honda CR-V insurance in under a minute.
Once you find a rate you like better than your current plan, Jerry’s team of insurance agents will handle all the paperwork and phone calls to get you switched over.
“
Jerry
blew my mind, honestly. From start to finish, using the app took me 10 minutes and I ended up with $100 of savings a month. Best of all, customer service answered all my questions about rental car reimbursement and roadside assistance.” —Savanna R.
| DIY
| |||
How to reset tire warning light on Honda Cr V? 2007-2012 responseIf you need to reset your Honda Cr V's abnormal tire pressure warning light, you can do it for free and in a few minutes. Simply enter the settings menu, select "Bus Reset" and confirm. Published: 4 May 2021 by ScegliAuto Related videos (inspections and maintenance) Reset tire warning light for Honda Cr-V How to reset tire warning light on Honda Cr v How to reset tire warning light on Honda CRV How to reset tire warning light on Honda Civic? How to reset tire warning light on Honda HRV 2020 How to reset tire warning light on Honda CR-V? How to reset the tire pressure warning light on a Toyota Yaris How to reset tire warning on Honda Accord? |
| DIY
| |||
Honda CR-V - Video Lesson Model: Honda CR-V MK 4 - Years 2012-2017 In this video tutorial, we will see how to reset the tire pressure warning light on a 2012 Honda CR-V by following these simple and quick steps; Before performing this operation, any problem related to pressure changes in one or more tires must be resolved. Then we get into the car and turn on the ignition; now press the button indicated on the steering wheel to scroll the instrument panel menu to the tire pressure item as shown in the video. Published on 20 December 2021 by ScegliAuto | Why does the Check Engine light come on? With this video tutorial we can understand why the engine warning light comes on. When the yellow light comes on, it indicates a less serious problem, however, when the red light comes on, it indicates a more serious problem, so the car should be stopped as soon as possible to avoid damage. The check engine light comes on when one of the sensors associated with, for example, the anti-pollution system detects a malfunction (eg too low or too high pressure in the turbine, clogged particulate filter, etc.). ). If you turn off the car engine and start it again and the light stays on, the problem may be in the electronic system.  |
Turn on the instrument panel (not the engine, n 
Let's begin with 
We can only confirm the reset of the tire pressure indicator by watching the video to the end! 
