Unsure how to reset the tire pressure light on your Ford after inflating the tires? Your tire pressure monitoring system (TPMS) is critical to ensuring your safety, and it’s important to pay attention to its alerts. However, if the light remains on after addressing any issues, then you can follow these steps from Jim Hudson Ford to turn the light off and learn more about the purpose of the TPMS in the process. And remember, if issues persist, you can always bring your vehicle to the service center at Jim Hudson Ford near Chapin.
If the TPMS light ignites on your dashboard, then check the tire pressure in each tire and inflate them as necessary to the recommended PSI. This figure is located inside the driver’s side door or in your owner’s manual. If reinflation doesn’t work, try out these actions:
What does a flashing tire pressure light mean? This may indicate that the tire pressure sensors need replacement batteries, or that there is an issue with one of the sensors in general.
To diagnose the actual problem, schedule service near Irmo at Jim Hudson Ford. Our technicians can get things figured out in no time!
Having your TPMS light on isn't a reason to worry. There are many ways to turn it off, and Columbia-area drivers can always contact Jim Hudson Ford for more advice on all service-related questions, including how to check car oil or how to unlock a steering wheel.
Although every reasonable effort has been made to ensure the accuracy of the information contained on this site, absolute accuracy cannot be guaranteed. This site, and all information and materials appearing on it, are presented to the user "as is" without warranty of any kind, either express or implied. All vehicles are subject to prior sale. Price does not include applicable tax, title, and license charges. ‡Vehicles shown at different locations are not currently in our inventory (Not in Stock) but can be made available to you at our location within a reasonable date from the time of your request, not to exceed one week.
Although every reasonable effort has been made to ensure the accuracy of the information contained on this site, absolute accuracy cannot be guaranteed. This site, and all information and materials appearing on it, are presented to the user "as is" without warranty of any kind, either express or implied. All vehicles are subject to prior sale. Price does not include applicable tax, title, and license fees. ‡Vehicles shown at different locations are not currently in our inventory (Not in Stock) but can be made available to you at our location within a reasonable date from the time of your request, not to exceed one week.
Nick | November 26, 2020 | Guide, Vehicle | No Comments
Last Updated on November 26, 2020 by Nick
TPMS Reset: Ford Fiesta Low Tire Pressure Sensor Light (2012-2021) – The Ford Fiesta is a medium-sized car from the compact class of the American car brand Ford.
In 1976, Ford introduced the Fiesta as a new model in the compact class.
Ford is already producing the seventh generation of the Fiesta. It has become more prominent and, above all, more luxurious. Ford presented the latest generation of Fiesta in Germany at the end of 2016.
Table of Contents
Whenever tire pressure is adjusted, change a tire, or get it rotated you must carry out the TPMS reset procedure. Depending on the vehicle model you have, here are a few ways to reset the TPMS on Ford Fiesta:
Time needed: 7 minutes.
Follow the instructions below if your vehicle is a US model made in 2012 2013 2014 2015 2016. You’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System on this model. Follow these steps to do it:
Stop the vehicle and turn off the engine
Ensure fully pressed!
If your vehicle has an ignition button, press the START/STOP button once to turn ON the ignition and then press the button again to turn OFF the ignition.
Do this 3 times with the ending in the ON position
Ensure fully pressed!
Do not release the key!
If your vehicle has an ignition button, press the START/STOP button once to turn ON the ignition and then press the button again to turn OFF the ignition. Do this 3 times with the ending in the ON position
The horn will sound twice and the TRAIN LEFT FRONT TIRE message will appear on the screen
Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
A chirp horn will confirm that the sensor has been reset
The TIRE LEARNING message will disappear
Done!
If your vehicle is a European model made in 2015 or 2016, you can reset the TPMS via the infotainment display by using the display controls on the audio unit.
Follow these steps to do it:
If your vehicle is the latest generation of the European models, you can reset the TPMS through the cluster display without using tools. Follow the instructions below:
These instructions are based on the Ford Fiesta owner’s manual.
This procedure should apply to the sixth and seventh generation of Ford Fiesta (2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article TPMS Reset: Ford Fiesta Low Tire Pressure Sensor Light (2012-2021) can solve your problem. Good Luck!
Tags:2012 Ford Fiesta, Fiesta Low Tire Pressure, Fiesta Tire Pressure Sensor, Fiesta TPMS Light Reset, Ford Fiesta Tire Pressure, Ford Fiesta TPMS Reset
Hi! Greetings, I'm Nick. I am an automotive technician and a vehicle enthusiast. I'm an expert in the field of engine oils and lubricants. After working at the dealer service station for more than a decade, I was happy to be the editor and author of the articles on automobiles.
report this ad| DIY
| |||
Ford Fiesta - Video Lesson Model: Ford Fiesta MK 6, Fiesta 6, MK VI - Years 2008-2017 In this guide, we will see how to reset the tire pressure warning light on a Ford Fiesta. Let's turn on the picture. Press the "Menu" button to access the car settings. Scroll down until you get to Car Settings. We press "OK". In the vehicle settings menu, scroll down one position to access the Tire Pressure setting. As indicated on the screen, we will have to press and hold the OK key. Published 1 December 2021 by ScegliAuto | How to reset AdBlue light on Peugeot 3008 1.5 BlueHDiToday in this quick guide we will see the required procedure that will allow us to reset AdBlue light on Peugeot 3008 1.5 BlueHDi. Before resetting the AdBlue warning light, the correct fluid level must be restored; then we get into the car and connect our diagnostic software, as shown in the video. At this point, let's move on to the troubleshooting point or Reset AdBlue to reset it; waiting for the countdown to complete the reset operation! Watch the video! by ScegliAuto more videos
|
| DIY
| |||
Ford Fiesta - Video Lesson Model: Ford Fiesta MK 6, Fiesta 6, MK VI - Years 2008-2017 To reset the Ford Fiesta tire pressure warning light, all tires must be inflated to the recommended pressure. The recommended internal pressure is indicated on a sticker affixed to the inside of the driver's door pillar. When all tires have returned to this pressure value, it will be possible to turn on the dashboard so that the sensors read the new pressure value; if it is correct, the warning light will automatically turn off and disappear from the dashboard forever.  |
Once this is done, a reset message will appear. At this point, just click the OK button again. 
