We at Tire Hungry, are committed to answering every tire-related question and providing helpful guides to keep your tires last longer. For all intents and purposes, we even covered how to fix slashed tires here for those who have been victimized. So it’s quite ironic to talk about ruining vehicle tires, but we want to have it all for you.
To slash someone’s tires, first, you need a sharp and pointed tool, (a serrated pocket knife works best) then aim for the sidewall and make a quick and forceful strike. Push the blade deeper into the tire while pulling it to the side.
The process of slashing someone’s tires is really simple, what you have to know though, is that you should need to re-examine your intentions, plan your way, and anticipate the consequences.
What's In This Guide?
Tire slashing is making any gash, slit, or lacerations deflate the tires in a damaging manner. Commonly done at the tire’s sidewall, most of the cases of tire slashing are intentional, and the most probable motive is brought by someone who wants to have swift justice by themselves. It may be someone involved in road rage, a co-worker that has a hidden grudge that wants to get even, or in some recent reports, a bold statement of a cheating spouse.
There are also cases where slashing someone’s tire is a necessary and more sensible option. One example is running away from someone chasing you and slashing their tires is the only reasonable way to escape.
Things to consider before slashing tiresBefore you point your chosen weapon to that helpless sidewall, make sure to apply a lot of force, as tires are built to be sturdy and durable.
Slashing tires can also cause a loud, attention-catching noise, so you need do it with precision, and you should guard yourself against being injured while doing so. Since tire slashing is considered a misdemeanor in many states, you also have to consider the consequences of getting caught.
Tires are durable and sturdyThe materials that make up the tires are built to last long. With normal use, a tire can last for up to 10 years! That’s why it will take a lot of force for you to slash them swiftly and quietly. A sharp and pointed tool can greatly help, but it will primarily be based on how you will strike the tire.
Slashing tires can cause attention-catching noiseA normally inflated tire has enough pressure build-up that will produce significant noise when released. Small incisions are the loudest. This is due to the need for pressure equalization as air escapes. In this case, a wide and deep slash works best to keep noise at a tolerable level.
The consequences can range from fines to jail timeAnything that was done to deface, alter, or destroy property intentionally with no right to do so is considered criminal mischief. That includes slashing someone’s tire. Be careful not to get caught as the consequence will not be limited to payment to damages, a fine, court costs plus a surcharge, and jail time depending on the degree of damage.
Again, your safety is paramountYou don’t want to end up in an emergency room because a tire has blown out right in your face when you try to slash it. That said, don’t slash with your face near the tire. A highly pressurized air coming out of the incision can potentially damage your face, eyes, and ears, not to mention the debris that may fly out is not done swiftly.
Tools You Can Use to Slash TiresThe goal here is to be swift and discreet, inflicting more damage as possible and not to be too suspicious. A serrated pocket knife and a regular kitchen knife can be reliable, handy tools. You can also consider using pointed tools such as a screwdriver, awl, pricker, and bodkin though these are designed to pierce through.
Pocket knifeA strong pocket knife could be your best weapon. It draws the least attention and is portable as most designs can be securely folded. Check out for a pocket knife with a serrated blade because it is designed for harder materials that require a good bite to slice through.
Kitchen knifeThe most common and reliable tool you can find is your trusty kitchen knife. However, since you’re using it for everyday slicing duties, make sure the knife should be sharp enough so it can seamlessly slice through the sidewall. Also, it should be big and solid enough not to bend when you do the slashing. The only drawback of using this tool is potentially carrying more suspicion to onlookers if you decide to go with a larger knife.
Screwdriver, awl, pricker, and bodkinThough these are not directly considered as ‘slashing tools’ (except for the bodkin), these can also be an effective tool to inflict enough damage by poking through the sidewalls, inflicting damage at a slower pace yet have the same result as you would when slashing tires.
How to Slash Tires Part 1: Swift and DiscreetYou should aim for the sidewall while standing away with the tire between your legs and strike with one quick slash, pushing the blade deeper as you pull it to the side.
Aim for the tire sidewallNear the rim, this is considered the weakest part of the tire. Plus, you have a clear and open vantage point rather than targeting the tread.
Stand facing away with the tire between your legsThe high pressure forcing out of the slashed area may be harmful to your face and eyes, having a safe distance between you and the tire is recommended.
Strike with one quick slashYou should get the slashing done in a quick and forceful motion. Pushing the blade deeper, pull it to the side.
How to Avoid Getting Your Tires SlashedIf you’re on the other side of the picture, worrying you’ll get a slashed tire anytime soon, you can avoid your tires from being severely slashed if you do preventive measures such as relying on CCTVs, parking in a secure location, trusting with your four-legged companions and lastly, to drive responsibly as the root of some cases of tire slashing is brought by road rage incidents.
Drive responsiblyIt would not hurt so much if we will practice being a defensive driver. Most of the cases of road rage that end up with a vandalized vehicle are rooted in unpleasant behavior and responses when caught up in tension with other motorists when driving.
Count on CCTVsThe mere presence of these cameras already poses a signal to perpetrators that you can identify them if they do such an act. If you will park in a public place, park with the nearest CCTV camera that has a clear vantage point to your vehicle as much as possible.
Your dashcam can be a good device too. Just make sure that you have set to keep on recording even if you leave the vehicle.
If in public space, park in a secure locationPotential vandals will stay away if you are parked in spaces with ample lighting, adequately guarded, and with enough CCTV like mentioned above. It is also highly suggested to park near the entrance or the exit as these areas have a higher volume of people going around.
Guard DogsThey are not regarded as man’s best friend for nothing. Their constant bark to any stranger that will go near your house is enough to cause noise that keeps them at bay.
How to Make Use of Slashed TiresBefore you disposed of slashed tires, and if you don’t feel the additional effort of bringing them to a recycling facility, you can still reuse them for more useful purposes. You can make simple DIY projects out of these damaged tires such as a dog bed, garden chair, an indoor ottoman, and you live on a farm, you can make feeder pots out of these tires.
The point is, even if you ended up in an unfateful scenario, you can still make the good out of it and remember how to avoid getting your tires slashed again in the future.
ConclusionIf you are determined to slash someone’s tires, the process itself is just as easy as slicing through.
| Tire Forge
Page Contents
One life-saving yet dangerously illegal thing to do is slashing a tire. It is a life-saver if you think you are being followed or chased; however, purposely slashing someone else’s tire is a criminal offense. The latter could lead you to jail.
If this act was needed in desperate situations, here is an article on how-to. However, it doesn’t suggest that you go about slashing people’s tires because you are now in the know-how.
How Do You Slash Someone’s Tires?Slashing is defined as a way of making a deep cut into something using a sharp tool, like a knife. When it comes to tires, it technically means purposely deflating the tire.
However, cutting a tire can be a bit tedious because most tires on the road today are strong and durable. It could take you several minutes to achieve your aim.
Along the line, you could be faced with different circumstances – especially the loud noise that comes with the slashing.
For professionals that already know how to slash tires, it comes easy with them – one without noise. As soon as they puncture the tire, it may almost look normal until it gets flat, and ultimately deflates.
That height of perfection may be almost difficult for newbies, which is why this article is important.
In this beginner step-by-step guide, you need a list of tools to get the job done. Also, there are certain precautions you must take as you slash the tire of a car.
What are the Tools Needed?Below are two effective tools to get a tire slashed quickly and seamlessly.
Other tools you will need include:
Before you start with someone else’s car, you need to keep up with an act. While you are at it, you need to be careful. After you are done, you should be a lot more careful. The whole essence is to avoid getting caught. Here is a list of tips that will help.
On how to slash tires, below are the ways to go about it.
With a KnifeStep 1: Get a sharp knife, different from a household/domestic type.
Step 2: Move closer to the tire you want to slash and poke the rubber surface with enough force
Step 3: Remove the knife almost immediately
Step 4: A regular pressurized tire should make a “phsshhh” sound when punctured. It is the release of air from the tire.
Step 5: Repeat for other tires or not.
Step 6: Walk away quietly
With a NailIt is almost the best way to slash a tire, only that it takes a few hours before the effect sets in. In this case, it involves poking.
Step 1: Puncture or poke the tire’s rubber surface with a nail. It could be done once or a couple of times
Step 2: Remove the nail immediately and quietly walk away
Step 3: After a few minutes of air expulsion, the tire becomes flat.
Deflate without Tire SlashAnother method is releasing the tire valve to get rid of air. With the help of a car valve tool, it is possible to deflate a tire without slashing. It can save you a lot of work.
Things to Consider Before Slashing TiresIf you want to deflate a tire intentionally, for one best-known reason or another, you should bear in mind a few things. They are consequential to help you think through the whole process before embarking on it.
Is it Legal To Slash Someone’s Tires?
Slashing tires is illegal. It is considered a dangerous thing to do, knowing that it jeopardizes the safety of a car owner. It may even lead to death, ultimately.
Since it is a criminal offense, a person is either charged with a felony or misdemeanor. The value of the tire depends on what crime it is. However, the slashing of a regular car tire is treated as a Criminal Mischief: Misdemeanor A.
It may result in paying fines and damages or potential imprisonment.
Is Slashing 4 Tires a Felony?
If someone only slashes one tire of a vehicle, it is considered a felony, talk less than 4 tires.
The number of tires determines the gravity of the offense, thus, the higher the fine or damages.
Peradventure, a vehicle owner knows who slashed his tires; he or she may report to the nearest police station.
The police ask if such a person would like to press charges or not.
If they would like to press charges, the police apprehend whoever is responsible and charges them with felony or misdemeanor.
Does Slashing a Tire Make Noise?
Not everyone is good with using sharp tools to puncture the tires of cars or automobiles. If you aren’t an expert, there is a good chance that the slashing process will be a loud one.
The pressure in a tire becomes released when slashed, causing a degree of noise.
Moreover, the quality and strength of the tires determine whether there would be noise when you cut or make a hole into them. Therefore, it is important to thoroughly check, so you know what you might be expecting.
Why It’s a Bad Idea to Slash a Tire?
Following reviews and posts on different websites, tire slash is dangerous. The air coming out of the hole on the tire can really cause damage to your face and eyes.
Therefore, it is somewhat a bad idea if you’re thinking of doing it for pleasure.
ConclusionLearning how to slash tires may seem like a consequential life hack but it doesn’t change the fact that it is a punishable offense by law if perpetrated intentionally.
There are circumstances where you may really find it useful – for instance, when your safety depends on it.
Only until you are faced with such a situation, you shouldn’t deflate or release the pressure in a tire from a car that isn’t yours.
Thanks for reading our article! We've written this article with a lot of thought and care. If you're interested in seeing more of our content, please check out our Tires section and find an answer to your questions!
02/22/2018
Despite the objective importance of the spare tire, not all drivers always have it with them. Some do not carry a spare tire out of hope or belief that their tires are invulnerable. Others deliberately take this step, as they stocked up with a special tool in advance, which, if necessary, can eliminate a tire puncture along the way. What else can be used and how to do it right? Let's figure it out.
Contents of :
Conventionally, all methods for express tire repair can be divided into two categories:
Consider ways to restore a damaged tire on the road. The first three methods are temporary. The latter, with the right approach, allows you to completely restore the tire.
After removing the foreign object, the hole is processed with an awl with abrasive edges: this tool must be inserted into the puncture and cleaned and developed with intensive reciprocating movements several times. Then the raw rubber tow is removed from the package and inserted into the eye of the second awl so that both ends are the same length. The hole in the tire and the raw rubber is treated with an activator. Next, the awl is inserted into the puncture in such a way that small ends of the tourniquet, about a centimeter long, remain outside. After 5 minutes, the excess remaining on the surface is cut off. This method can also successfully eliminate small side cuts.
There is a technique that allows using wire and several bundles of raw rubber to get rid of even extensive side damage to tires. However, it is quite difficult to implement and not every driver will be able to implement it.
Consider a few well-known tools that are most widely used to repair punctures:
Our online store offers a wide range of tire repair products. You can order them through the TopDetal. ru website or by calling 8 800 444-75-16.
Also read on our website about the best liquid rubbers.
Back to list
Is one of your car's tires flat again? And now the wheel is almost on the rim. Because of what this happens, because you can not find visible damage. No puncture, no cut. What happened? In fact, tires can poison the air not only because of punctures. Let's name 7 main reasons due to which problems may arise.
Tires can deflate differently. With different intensity and speed. Sometimes a problematic tire cannot last a week in an inflated state, and sometimes it easily holds atmospheres for more than two or three weeks, until the pressure reaches similar values.
One explanation for these surges is a change in temperature, which results in a change in tire pressure in the wheel. But this is not the reason why the tire is flat.
If the overboard temperature remains constant and the tire(s) on your vehicle bleed over and over again, there is a leak that needs attention. Why is this happening?
age;
chemical contamination;
excessive loads.
All of these, individually or in combination, can cause tire or rim parts to fail over time. So, here are 7 reasons why this happens:
photo: nokiantires.com
Hitting any pointed object can puncture a tire. A tiny nail can puncture and then fall out, causing a slow leak of 0.1 to 0.3 atmospheres per week. Visual inspection of the tire will not give results. You either need to treat the wheel with soapy water and see where it bubbles, followed by a visit to a tire service, or go there right away.
photo: etrailer. com
Made of rubber, tubeless valves can deteriorate over time. Rubber will harden and crack, reducing their tightness.
They can also be damaged by hitting a curb or other mechanical impacts (such as a car wash brush at a car wash). Keep valve stems clean (do not lose caps).
Also, overtightening the cap can damage the valve core. The valve may begin to bleed because of this.
photo: reddit.com
A torn tire is not safe, especially if the break is on the side wall (not uncommon when "grinding" to the curbstone). Driving on a tire with a loose bead, even if the leak is small, is dangerous! Combine this with an under-inflated tire that can overheat and you have a real explosive mixture!
photo: pirelli.com
The bead is where the tire fits snugly against the rim. The bead on older tires that have started delamination may have reduced elasticity and no longer provide adequate sealing. The side ring weakens, the side zone begins to let air through. The pressure drops.
See also
Flat tire, how to find a puncture in a tire
Also, the bead ring can be damaged by frequent mounting/dismantling of tires. The only thing that can save you from a constant headache in this case is buying a new tire.
photo: crsautomotive.com
The problem may be hiding in the rim itself. It can start to corrode (and this can happen both with steel stampings and with light alloy discs) due to old age, improper storage, high humidity, reagents and a number of other factors, up to low-quality disc alloy.
Corrosion where the rim meets the tire bead is a common cause of air pressure loss.
Cast aluminum and magnesium alloy wheels are more susceptible to corrosion. Make sure the tire shop technician carefully inspects the area where the wheel seal and tire ring are located for oxides before changing the wheels. What's more, even a new tire will never fit properly on a badly rusted wheel and will start to corrode and wear improperly.
An often overlooked possibility of pressure loss is the air escaping through the wheel rim itself. The reason is as follows:
poor casting;
severe corrosion;
mechanical damage to the disc - cracks, bends.
In this case, there are two options: repair the disc, if possible, or buy a new one.
Do not pour sealant into a tire to fix a rim problem. It won't help. But at the same time, you can render a normal tire unusable or “kill” the sensor of the wheel pressure monitoring system.
photo: www.smartmotorist.com
You are playing a dangerous game if you think that inflating a bad tire to capacity will increase the time between pumping. In addition to a harsh, noisy ride due to over-inflated tires, an over-inflated tire will begin to “eat the tread” faster, wear out and become unusable.