This post contains affiliate links.
Wear and tear can wreak havoc on Power Wheels tires, and there is usually nothing that you can do to prevent it. Plastic will deteriorate over time when exposed to the elements. Power Wheels tires are typically made of thick plastic and can take quite the beating, so instead of worrying about buying a new set of tires each time, you can learn how to fix power wheels tires yourself.
There are many ways that you can repair a Power Wheels tire when it becomes cracked or gets holes in it, such as:
Depending on how bad the damage is, however, you may need to replace the Power Wheels tire.
Finding cracks and holes in your child's Power Wheel can be a little frustrating, especially when you factor in how much the toy cost. Thankfully there are ways to try to repair the tire before needing to replace it. Read on to find out exactly how you can repair your child's Power Wheel tires.
There are a few ways to fix your child's Power Wheels tires when they start to show signs of wear and tear. They are fairly inexpensive and easy to take on by yourself. Let's look at the different methods to repair the plastic wheels of the toy.
You can use a plastic bonder to fill in the cracks that may form on the tires. The bonder comes in two separate tubes that, when mixed, start to set in just 15 minutes, so you will want to work quickly. It takes 30 hours to cure, so your child will need to stay off the Power Wheels for that time.
This bonder is very strong and dries black, which is the color of almost every Power Wheels tire on the market.
It is very easy to use with cracks in tires as it can drip down into every crack easily. Because it is extremely strong, it will not fall off or allow the tire to crack further.
PlasticWeld is a mixable epoxy putty type of sealant that will form a very strong bond after being mixed. To use the putty to seal the cracks, you simply:
The putty can be used in many ways to fix tons of different plastic items around your house. It is a good idea to use gloves when mixing the putty and a mask if you plan to sand the putty.
The best thing to buy when needing to repair plastic wheels will be something that can fill the cracks.
Don't just try to glue the cracks back together.
It is very easy to fix Power Wheels tires, but over time depending on the terrain and climate, they will need to be replaced. When you replace Power Wheels tires, upgrade them to rubber, which will last much longer than the stock plastic.
The rubber tires are still very affordable, yet the rubber will last longer. There are also many great benefits to trading the plastic Power Wheels tires in for rubber tires such as they:
If you have already filled in the cracks on your plastic tires with the methods above and more cracks have formed, it may be time to upgrade. You can find Power Wheel tires here. If you don't want to fully upgrade your tires, you can try a simple DIY hack.
If the Power Wheels wheel well/inner fender allows enough space, you can buy something like a Skid Surf. This can be attached using the sealants mentioned above, and it will help to hold the plastic tire together. It will also help create a better-looking surface that is more durable.
Repairing your child's Power Wheel tires does not take much time and effort. Your child will never know the difference, and it won't cost a lot of money.
If the stock tires continue to break or are beyond repair, you can easily find replacement Power Wheels tires online that are made of either plastic or rubber for a very low price.
Has one of your kid’s power wheels’ plastic tires cracked? Well, if it has, then you’re not alone; most parents have to deal with this issue at some point and some of them end up replacing the tires.
Fortunately, it is possible to repair a cracked power wheel tire in under one hour instead of buying a replacement tire.
The best method for fishing a cracked power wheel tire is using fiberglass kits or duct tape.
Table of Contents
1
How to Repair a Cracked Power Wheel TireAll-new power wheels come with plastic tires designed to tackle a wide range of driving conditions while supporting the driver’s weight.
Unfortunately, these plastic tires are not durable, and since they spin a lot on snow, mud, and grass, they tend to wear down at a very fast rate. With no traction to help the car tackle smooth surfaces, the rate of wearing down increases, and this might result in tire cracking.
Our kids are rough drivers, and the fact that they love trying new routes with their toy cars can result in accidents that can end up cracking one of the tires.
And since riding a toy car with a cracked tire is dangerous, you may need to either replace it or repair it. Unfortunately, replacing all the wheels can be quite costly.
Therefore, you need to repair the crack as soon as it appears to prevent it from growing. And if the tire has lost traction, you need to fix the crack before improving its traction. Luckily, there are a few straightforward methods you can use to repair cracked wheels.
To fix a cracked power wheels tire, you should do the following:
Step 1: Remove the Cracked TireStart by placing the toy car in your workstation and elevate it so as to easily access the four wheels. Make sure the car is steady before proceeding. Alternatively, you can use a mini jerk and elevate the damaged tire.
Once the car is elevated, you can remove the retainer cap on the cracked tire. Slip your flat-edged screwdriver between the retainer cap and the hubcap to lift and remove it.
Some retainer caps are hard to remove, so you should be very patient when removing the retainer cap.
Once the retainer cap, you can loosen the retainer nut using a screwdriver and then remove it.
If any of the tires have lost traction, this may be the right time to improve their traction while repairing the cracked tire.
Make sure you wash the axle of the cracked tire using soap and water or wipe it using a wet cloth.
Step 2: Clean the Cracked TireAfter removing the tire, you can first wash it and remove all the soil or dirt particles in the tire’s nooks and crannies. Next, wash the tire using water and soap in a huge basin.
The dish soap will help remove dirt on the wheel. Next, you can reach the grooves using a toothbrush and ensure that it’s clean before you start repairing it.
Let the tire air dry on a clean surface before removing the remaining grime and oil using rubbing alcohol.
Step 3: Repair the Cracked TireIf the tire also had less traction, you should first sand down the tire to create an adhesive surface before washing the tire. Then, fixing the crack will make it possible for the traction coating that you will apply to serve your kid for a very long time.
Luckily, there are a few methods for fixing a cracked tire that can leave your kid’s power wheels tire as good as new. And the most popular methods for dealing with a cracked tire are fiberglass kits or duct tape.
You can also apply strong super glue on the crack and let it dry before sanding it down, and the tire will be back to normal. With duct tape, you have to be very careful not to apply too many layers as they will affect the tire’s shape.
The fiberglass kit is the best option for fixing cracks since it comes with instructions on applying it.
Apply the fiberglass kit as per the manufacturer’s instructions, and then let it settle. After it has dried, you can add a rubber sealant to the tire to help improve traction. The best rubber sealant for the job is the Flex Seal Spray.
Step 4: Reinstall the Repaired TireAfter the glue has dried and the crack is sealed, you can attach it to the car’s axle and tighten the retainer nut before reinstalling the retainer cap.
Next, remove the jerk or lower the car to the ground and make sure the tire is not wobbling when the car is driven. It would help if you can ask your kid to drive the car and then look at the tire to confirm if it’s in excellent condition and not wobbling.
If the tire is wobbling, then you will have to remove it and then install it correctly.
Are the Tires Interchangeable?If the crack is too big, then you may need to replace it. And if that is the case, then I am sure you’re wondering if the tires are interchangeable, especially since you already have a broken-down power wheel in your garage.
Well, the answer is no; power wheels make unique tires for each toy car. Therefore, if it’s not the same model, you may have to purchase an entire set of tires.
Installing a tire meant for another power wheel model can affect the toy car’s performance. Luckily, power wheels have replacement tires for each model. You can also choose to replace the plastic tires with more durable rubber tires.
The plastic tires that come with power wheels are not durable; therefore, they can wear down faster, and in the worst-case scenario, they can crack. So instead of purchasing a new tire because of a small crack, you can repair the crack using duct tape or a fiberglass kit.
Repairing the cracked tire is quite easy, and you don’t have to take the toy car to the garage every time it gets damaged. But make sure you reinstall it correctly after repairing it.
Your privacy is important to us. For this reason, we have developed a Privacy Policy that describes how we use and store your information. Please read our privacy policy and let us know if you have any questions.
Personal information refers to data that can be used to identify or contact a specific person. nine0003
You may be asked to provide your personal information at any time when you contact us.
The following are some examples of the types of personal information we may collect and how we may use such information.
What personal information we collect:
How we use your personal information:
We do not disclose information received from you to third parties.
Exceptions:
We take precautions—including administrative, technical, and physical—to protect your personal information from loss, theft, and misuse, and from unauthorized access, disclosure, alteration, and destruction.
To ensure that your personal information is secure, we communicate privacy and security practices to our employees and strictly enforce privacy practices.
| Price | |
| Mounting/removing the load wheel | 350 |
| Mounting/removing the tractor wheel | 1200 |
| Mounting / dismantling of the Ural wheel, all-terrain vehicle (Kamaz, KrAZ) | 1200 |
| Removing/installing wheel | 350 |
| Removing/installing double ramp | 500 |
| Spare wheel removal/installation | 350 |
| Repair of through damage to the chamber up to 5mm. nine0058 | 150 |
| Repair of through damage to the chamber from 5mm. up to 10mm. | 200 |
| Repair of through damage to the chamber more than 10 mm. | 300 |
Replacement of truck and agricultural valves. cameras | 750 |
| Troubleshooting truck and tractor tires | 500 |
| Oversized tire troubleshooting | 4000 | nine0063
| Bead treatment with sealant | 500 |
| Cosmetic tire repair | 1500 |
| Truck tire repair | from 3000 |
Price list for the repair of oversized tires
KGS- R
Through cuts
side
nine0180L / H
23.5 r25
26.5R25
29.
5R25
R33
R35
R39
to 130/28
10600
13800
16,000
19200
20 500
24700
to 165/50
12600
16 200
18800
22400
25,000
26600
16,000
19200
23400
25600
29800
33,000
to 230/95
19400
nine005823 200
25,000
30 800
36600
37400
Damage vulcanization: up to 130/28 - 2000; up to 165/50 - 3,000; up to 200/75 - 4,200; up to 230/95 - 5400.
nine0002 shoulder
| to 215/120 | 19200 | 25600 | 32,000 | 36400 | 42800 | 48 200 |
Damage vulcanization - 3,000
running
| to 30 | 11 200 | 14300 | 14400 | 16500 | 18700 | 22800 | nine0063
| to 50 | 13 100 | 15600 | 17 100 | 20 600 | 25 100 | 26600 |
| to 70 | 15 000 | 18 200 | 22400 | 25600 | 35 800 | 32,000 |
| to 90 | 17900 | 23400 | nine0065 28400 | 35 900 | 37400 |
Damage vulcanization: up to 30 - 3200; up to 50 - 4,600; up to 70 - 5,000; up to 90 - 6 400.
KGS- D
plies from 18 to 28
| size | _________ R 25 ___________ R 25/29 R 33 9 R 35 R 39 9017 39 9017 18-23.5 26.5 29.5 | |||||
| to 70 | 8800 | 10 200 | 11600 | nine0065 14400 | 15800 | |
| to 90 | 10 700 | 12600 | 14500 | 16400 | 18 300 | 22 200 |
| to 110 | 13 100 | 15600 | 19 100 | 19600 | 22 100 | 25600 | nine0063
| to 130 | 16400 | 20 800 | 25 200 | 27400 | 32800 | 40 200 |
Damage vulcanization: to 70 - 2000; up to 90 - 3,000; up to 110 - 4,200; up to 130 - 5 400.
plies 32 to 42
| to 70 |
| 15,000 | 19000 | 22,000 | 25,000 | 30,000 |
| to 120 | 19400 | 25 200 | 27,000 | 31 800 | 50 600 | |
| to 170 | nine0156 25 700 | 30 600 | 34500 | 38400 | 60 300 | |
| to 220 | 30,000 | 36,000 | 41,000 | 48,000 | 70,000 |
Damage vulcanization: up to 70 - 3200; up to 120 - 4 600; up to 170 - 6,000; up to 220 - 7 400.
