Tire depth gauge

How to Check Tire Tread Depth?

Written by Steven Schiller

Fact checked by Henry Speciale

January 2, 2023

A tire tread is composed of ribs or grooves throughout the circumference of the tire. This raised portion of the tread expels water making the vehicle safe to drive under difficult weather conditions such as rain and snow.

However, when the tire tread wears down, it loses traction on the road and forces the braking and steering system to work harder especially on wet conditions. It becomes unsafe to drive when the tire tread depth reaches 2/32 inches.

But, how to check tire tread depth? Tire tread depth can be measured using a penny, a quarter, a tire tread wear indicator, or a tire tread depth gauge.

Table of Contents

Ways to Check Tire Tread Depth
- 1. With a Penny
- 2. With a Quarter
- 3. With A Tire Tread Wear Indicator
- 4. With A Tire Tread Depth Gauge
Detailed Steps for Each Way
- The Penny Test
- The Quarter Test
- Tire Tread Wear Indicator
- Tire Tread Depth Gauge
When is the Best Time to Check Tire Tread Depth?
Conclusion

Ways to Check Tire Tread Depth

1. With a Penny

In the US, you can measure tread depth on a tire using a penny.

Insert the penny to the tire groove with Abraham Lincoln’s head going in first.

If you can see all of Lincoln’s head, it means that the tire’s tread depth is below 2/32 inches.
If you have the same result when you check several grooves of the tire, tire replacement is inevitable.
If a small part of Lincoln’s head hides in the groove, it is safe to assume that your tire’s remaining tread is 4/32 inches.

Some recommend replacing tires as early as this tire tread depth measurement because of diminished vehicle performance. The tires may not survive harsh driving conditions.

2. With a Quarter

Another way to check the tread on your tires is using a quarter test.

In this test tread on tires, the tire’s tread depth is measured using George Washington’s head.

The tires are safer to drive if Washington’s head was covered entirely or not visible when placed in between tread grooves. This is typical with new tires having 10/32 to 11/32 inches or 8 to 9 millimeters.
If Washington’s head touches the rib of the tire when you insert it facing down (visible to you), the tires are still safe with 4/32 inches tread left.
If the quarter shows Washington’s head clearly, the tire tread depth is less than 2/32 inches. This calls for immediate tire replacement.

Conducting a penny test or checking tire tread with a gauge can reassure you that you measure tire tread correctly.

3. With A Tire Tread Wear Indicator

You can also check wear on tires without any tools because tires have a built-in tire tread indicator or wear gauge.

They can be seen as six bars throughout the tread ribs. The bar becomes visible as it reaches the minimum legal tread depth of 2/32 inches or 1.6 millimeters.

Some tires were designed with different grades of bar, such as 8/32, 6/32, 4/32, and 2/32. So check all the tread grooves to make sure it follows the tire wear indicator chart.

The tire tread depth of brand new tires of pickup trucks or large vehicles is around 15/32 to 20/32 inches.

4. With A Tire Tread Depth Gauge

If you would like to get a precise tire tread depth measurement, use tire tread depth gauge.

Of course, this tool cannot measure a bald or totally worn-out tread.

Look for the lowest tread depth. Insert the gauge pin into the groove, then press it towards the tread. This tool provides exact readings in inches and millimeters. They can be purchased in automotive shops for around $4.

What to prepare: Penny, Quarter, Tire Tread Indicator or Tread Depth Gauge

Penny – a quick coin test used to check if the tire tread depth is on the 2/32 inches threshold.
Quarter- another coin test that can tell if the tires are in good shape at 4/32 inches.
Tire Tread Indicator refer to the rubber notches that are raised to 2/32 inches. When the indicators are flushed, it means the tires are worn out to an unsafe level.
Tread Depth Gauge provides the most accurate tire tread depth measurement.

Detailed Steps for Each Way

The Penny Test

Grab a penny. Use Abraham Lincoln’s side.
Turn the coin upside down with Lincoln’s head pointed towards the tread groove.
Thrust the penny in between the tread of the tire.
Check if Lincoln’s head is visible. If it is, the tires are unsafe to use because the tread is shallow than the minimum tread depth.

If a part of Lincoln’s head disappears in the groove, the tread is still above 2/32 inches.

Do this test throughout the tire. Check various places, especially the areas that look worn out.

The Quarter Test

Get a quarter. Use George Washington’s side.
Insert the quarter with Washington’s head thrusted towards the ribs of the tire.
If you can see Washington’s head, the tires need replacement.

If the tread covers Washington’s head, the tires are safe to use at 4/32 inches deep.

Conduct this test in multiple areas in the tire. Pay attention to areas that are visibly worn out.

Tire Tread Wear Indicator

Look for the initials TWI (Tread Wear Indicator) on the shoulder of the tread.
Right across that point, you’ll find the tread wear indicators or bars at the bottom of the tread.
If the tread is flushed or exposed the same level as the wear bars, they are considered unsafe or worn out.
Some tires have numbers at the center of the tread rib that indicate the tread depth in millimeters. As the tire wears down, these numbers fade. The visible number when you check the tire indicates the tread left.

Tire Tread Depth Gauge

Check the measuring scale you are going to use (inches or millimeters).
Place the tire tread depth gauge on top of a groove of the tire.
Push the gauge.
Rotate the scale until you find a number with a line below it.
The first number that appears is the tire tread depth measurement.

When is the Best Time to Check Tire Tread Depth?

In general, tire tread depth should be checked every 3,000 miles or 5,000 km. It is also recommended to check the tread on tires seasonally or during changing of winter or summer tires.

Conclusion

Keeping a close check on your tire’s health is possible if you know how to check tire tread depth.

You can measure the tire tread depth with or without a gauge. The coin tests are helpful in providing an estimate of tire tread depth. However, if you would like to prevent vehicle accidents, the best way to check tread on tires is by using tire tread depth gauge.

The standard minimum tire tread depth is 2/32 inches but it is safer to plan tire replacement as soon as they approach 4/32 inches deep.

If you would like to know more about hydroplaning, feel free to share your thoughts.

Categories FAQs

A Few Words From the Author

I'm Henry, the content writer for PPMC Transport. We build our site entirely on experience and extensive market and customer research. My goal is to create a trusted platform where people can go to determine what is best for their vehicles in terms of safety and convenience. Keep an eye out for our useful guide!

- Speciale Henry

Tire Tread Depth Gauge | Depth Gauge | Tread Depth Gauge

Please enter a valid email.

Tire tread depth gauge (depth gauge)

Eelmine 1 Järgmine

odavamad ennem

Toote ID: 340485

Kood: 1001

Tarneaeg väljastuspunkti 1tp / koju 2-3tp

Lisa võrdlusesse

Toote ID: 121207

Kood: 0XTY028

Tootja: Profitool

Tarneaeg väljastuspunkti 1tp / koju 2-3tp

Lisa võrdlusesse

2.88 €

LISA OSTUKORVI

Toote ID: 365969

KOOD: 8057020

TOOTJA: M+

TARNEAEG Väljastuspunkti 1tp / Koju 2-3tp

Lisa võrdlusesse

6.57 €

9000 LISA OSTUKORVI

Toote ID: 340486

Kood: 1002

Tarneaeg väljastuspunkti 1tp / koju 2-3tp

Lisa võrdlusesse

Toote ID: 143423

Kood: SEA TST/DGE

Tootja: Sealey

Tarneaeg väljastuspunkti 1tp / koju 2-3tp

Lisa võrdlusesse

910. 71 €

3 LISA OSTORVI

E-poes saadaval 3tk . Juurdetellimise võimalus puudub. all metal manufactured by sügavusemõõdik. ideal tire tread depth to measure. 0-20 mm. Plastic bag.

Toote ID: 766937

Kood: 52873J

Tootja: JBM

Tarneaeg väljastuspunkti 1tp / koju 2-3tp

Lisa võrdlusesse

11.06 €

~~13.82 €~~ -20%

LISA OSTUKORVI

Toote ID: 22490

Kood: 1003

Tarneaeg väljastuspunkti 1tp / koju 2-3tp 11.87€

~~12.63 €~~ -6%

LISA OSTUKORVI

4 pilti

Toote ID: 629144

Kood: ENG NE00393

Tootja: ENERGY

Tarneaeg väljastuspunkti 1tp / koju 2-3tp

Lisa võrdlusesse

13.03 €

LISA OSTUKORVI

Toote ID: 121206

KOOD: 0XTY029

TOOTJA: Profitool

TARNEAEG Väljastuspunkti 1tp / Koju 2-3tp

Lisa võ

digital gauge for tires tread depth 0-25 mm

• measuring range 0. 0–25.0 mm, • replacement of meetriliste and tolliste mõõtmete sometimes, • nullimisfunktsioon, • accuracy 0.01 mm, • battery included.

Toote ID: 522143

KOOD: C.1363 CW

Tootja: Condor

Tarneag Väljastuspunkti 1tp / Koju 2-3TP

LISA VYRDLUSESE 9000 15.40 €

9000 LISAA OSTUKORVI 9000

4 pilti

Toote ID: 478789

KOOD: 24225t

Tootja: BGS

Tarneag Väljastuspunkti 1tp / Koju 2-3tp

Lisa vhange

16.16 €

9000 Lisa OSTUKORVI

3 pilti

Digital tire tread depth gauge

E-poes saadaval 1tk . Juurdetellimise võimalus puudub. suitable for tire tread depth to measure easy to read LCD display (digitaalkõrgus 7.5 mm) automatic inside- and 5-minutiline automatic shutdown prolongs the kasutusaega battery Mõõtühik millimeetrites or inches, saab at any time teisendada with one with a button light and durable operating temp. ..

Toote ID: 1000364

Kood: JEBM0125

Tootja: Toptul

Tarneaeg väljastuspunkti 1tp / koju 2-3tp

SEALEY Tire Depth Gauge

Digital Tire Tread Depth Gauge. Tough composite sliding gauge. 10mm High figures in LCD display for ease of reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows for comparative measurement.Model No:VS0564Range:...

Toote ID: 163782

KOOD: Sea VS0564

Tootja: Sealy

TARNEAEG Väljastuspunkti 1tp / Koju 2-3tp

Lisa võARDLUSESSE 20,0002 20.15 €

9000 LISAA OSTUKORVI

SEALEY Digital tire pressure gauge, tire tread depth gauge

• Tire pressure gauge together integrated turvise depth mõõturiga and töövalgusega.• Surunupu use LED backlight on display Tire pressure jaoks.• output on available bar, psi, kg / cm² or kPa.• integrated turvise sügavusmõõt on up to 20 mm. • automatic switch-off....

Toote ID: 569422

KOOD: Sea TSTPG11

TOOTJA: Sealy

TARNEAEG Väljastuspunkti 1tp / Koju 2-3tp

LISA Vhange

7 pilti

tire tread depth gauge 0.1 mm

E-poes saadaval 1tk . Juurdetellimise võimalus puudub. Mõõda for tire tread depth Lugemine 0,1 mm sammuga profile depth for precise määramiseks Pimestamiseta lugemine 30 mm mõõtesügavus light and very comfortable stable design on made of brass kõvast Praktilises hoiukotis made in germany net weight: 0.05 kg...

Toote ID: 630277

Kood: Hzt 666-5

Tootja: Hazet (Germany)

Tarneg Väljastuspunkti 1tp / Koju 2-3tp

Lisa vitis

23.99 €

LISAA O000

3 pilti

Digital tire tread depth gauge / Caliper, type: Digital, electronic, accuracy ±0,01mm

E-poes saadaval 3tk . Juurdetellimise võimalus puudub. Digital Tire Tread Depth Gauge – DVSA Approved calibrated and DVSA approved for use with all sõidukiklasside testimisel. tempered and hardened stainless steel gauge. Meetriline and Imperial kalibreerimine them with two teisendamisega. Null-lähtestamise management allows võrdlevat measurements. span:...

Toote ID: 695357

Kood: SEA VS0563

Tootja: Sealey

Tarneaeg väljastuspunkti 1tp / koju 2-3tp

Lisa võrdlusesse

79.08 €

järelmaks 6 €

LISA OSTUKORVI

Eelmine 1 Järgmine

Siin kuvatud andmeid, eriti kogu andmebaasi, ei tohi kopeerida. Ilma TecAlliance'i eelneva nõusolekuta on rangelt keelatud dubleerida andmeid ja andmebaase ning levitada neid ja / või anda kolmandatele isikutele juhiseid sellisteks tegevusteks. Mis tahes sisu kasutamine selgesõnaliselt volitamata viisil kujutab endast autoriõiguste rikkumist ja rikkujad võetakse vastutusele.

Tread depth gauge in the "Auto - Moto" category

Electronic tire tread depth gauge 0-25.4mm TOPTUL JEBM0125 TOP

In stock in Kharkov

Delivery across Ukraine

752 UAH Buy

Tire tread depth gauge 0-20mm, keychain on

Delivery across Ukraine0003

Delivery in Ukraine

281.29 UAH

365.31 UAH

Buy

Tire tire meter 0-20 mm, keychain OO

Delivery in Ukraine

.05 UAH

119.54 GRN

9000 9000 9000 9000 9000 9000 9000 9000 9000 tires 0.01mm oo

Delivery across Ukraine

278.47 UAH

361.65 UAH

Buy

Tire tread depth gauge 0-25mm / 1 inch

in a warehouse in Kiev

Delivery in Ukraine

174.4-212.5 UAH

from 2 sellers

212.50 UAH

250 UAH

Buy a tire tire meter 0-20 mm

at a warehouse in g in g in g in g in Kiev

Delivery across Ukraine

48 — 60. 35 UAH

from 2 sellers

60.35 UAH

71 UAH

Ol000

Buy

Digital thickness gauge measuring tire tread depth set standard HFKLD90DMN OB, code: 2364335

Delivery across Ukraine

229.99 UAH 90dmn SC, Code: 2364335

Delivery in Ukraine

229.99 UAH

500 UAH

Buy

Digital thickness meter of tire tires Komlpekt Standard HFKLD90DMN KB, 236435

9000 9000 9000 22 ° 9000 22 ° 9000 22 UAH

Buy

Digital thickness gauge measuring tire tread depth (set standard)

Delivery from Cherkasy

for 166 UAH

from 2 sellers

166 UAH

200 UAH

Buy

Cherkasy

Tire depth gauge

How to Check Tire Tread Depth?

Ways to Check Tire Tread Depth

1. With a Penny

2. With a Quarter

3. With A Tire Tread Wear Indicator

4. With A Tire Tread Depth Gauge

Detailed Steps for Each Way

The Penny Test

The Quarter Test

Tire Tread Wear Indicator

Tire Tread Depth Gauge

When is the Best Time to Check Tire Tread Depth?

Conclusion

A Few Words From the Author

Tire Tread Depth Gauge | Depth Gauge | Tread Depth Gauge

Tire tread depth gauge (depth gauge)

3 LISA OSTORVI

Tread depth gauge in the "Auto - Moto" category

Learn more