Tire puncturing strip


Tire Puncturing Strip - Crossword Clue Answers

The crossword clue Tire-puncturing strip with 7 letters was last seen on the January 31, 2015. We think the likely answer to this clue is CALTROP. Below are all possible answers to this clue ordered by its rank. You can easily improve your search by specifying the number of letters in the answer.

Rank Word Clue
94% CALTROP Tire-puncturing strip
3% TREAD Tire feature
3% AIR Tire filler
3% RUT Tire groove
3% SPARE Extra tire
2% LATH Wood strip
2% HISS Tire leak sound
2% TAPE Sticky strip
2% SLAT Fence strip
2% PANELS Comic strip makeup
2% EMERY BOARD Abrasive strip
2% NEONS Strip lights
2% UNDRESS Strip
2% TREADS Tire features
2% PLY Tire layer
2% WHITEWALL Tire type
2% DIVEST Strip
2% PEELOFF Strip
2% EXHAUST Tire
2% LEAKS Tire problems

Refine the search results by specifying the number of letters. If certain letters are known already, you can provide them in the form of a pattern: "CA????".

  • At Home With Friends, Convicts Crossword Clue
  • Fresh Hotel In Scottish City Crossword Clue
  • From The Start, Introduces Severely Marxist Ideology Crossword Clue
  • Positive Statement Senoritas Need Translating Crossword Clue
  • Produce Profound Effect With 'I Am A Reporter' Crossword Clue
  • Stockpile Great Crowd Heard Of Crossword Clue
  • To Use One’s Brain Less Than Fully Is Poor Crossword Clue
  • Being Nosy Crossword Clue
  • Jack Of All Trades? Crossword Clue
  • North East London Borough — Streatham Flow (Anag) Crossword Clue
  • Like Samuel Taylor Coleridge's Mariner? Crossword Clue
  • Cooler, Retired Agricultural Worker? Crossword Clue
  • Grey Has Overcome Rise Of Red Squirrel Crossword Clue
  • Ditch Has To Be Found In County Crossword Clue
  • As De Niro Might Say, 'Take A Seat' In An Old Chair Crossword Clue
  • Highest Nest Is One Of These Things Crossword Clue
  • Headline Story From Page Penned By Hack Crossword Clue
  • Nobody Has Time At The Moment Crossword Clue
  • Royal Awards Ceremony's Ending In Hour: Britons Had To Be Decorated Crossword Clue
  • Ringed Zone Around Old Lake And River Crossword Clue
  • Where Cassini Ended Mission, Go Beyond It Crossword Clue
  • Where Ships Are In Peril, Pacific Port Offers Sanctuary To Sailor Crossword Clue
  • Cambridge College Deprived Of Ale Backing Enquiry Initially — Where Check Expected? Crossword Clue
  • Brilliant Episode For One Cast? Crossword Clue
  • A Little Upset, Altruism Lacking In Charity Crossword Clue
  • Cosmetic: Not The Best For Much Longer? Crossword Clue
  • American Crossword Constructor Repulsed By That Man, Guiding Ladies Crossword Clue
  • Cry: Cross By The Sound Of It? Crossword Clue
  • Lifter Defending Techniques? Crossword Clue
  • Look To Catch Duck, Large Duck Crossword Clue
  • Late Night Party Dress Extremely Pretty, Chanel's Never Without One Crossword Clue
  • He Attempted To Get Marriage Annulled, Sardonically We Suspect Crossword Clue
  • Renovate The Pier, Please! Crossword Clue
  • Speaker Less Loud — Whisperer Of Sweet Nothings? Crossword Clue
  • Stuff In Case Emptied Out After Gold Turned Up In Container Crossword Clue
  • Tighten Muff Crossword Clue
  • Forbidding, Foreboding Phrase Crossword Clue
  • Jets, For One Crossword Clue
  • Beat Reporters Crossword Clue
  • Lazy — Crossword Clue
  • Chances Are Minimal In The End, Very Young Earner Has Admitted? Crossword Clue
  • ' Of The Tiger' (Alice Wong Memoir) Crossword Clue
  • Be On The Wrong Side Of A Rout Crossword Clue
  • Photo, For Short Crossword Clue
  • Holder Of Changing Pads And Wipes Crossword Clue
  • Invalidate Legislatively Crossword Clue
  • Mine Or Elevator Passageway Crossword Clue
  • School In The Big Apple Crossword Clue
  • Tent Fasteners Crossword Clue
  • Cattle Farms Crossword Clue

We found 1 solutions for Tire Puncturing Strip. The top solutions is determined by popularity, ratings and frequency of searches. The most likely answer for the clue is CALTROP.

With crossword-solver.io you will find 1 solutions. We use historic puzzles to find the best matches for your question. We add many new clues on a daily basis.

With our crossword solver search engine you have access to over 7 million clues. You can narrow down the possible answers by specifying the number of letters it contains. We found more than 1 answers for Tire Puncturing Strip.

Tire Puncture Tire Seal Strip


Product Introduction:

Better safe than sorry! Planning on a long trip? Keep this auto repair tools handy to stop a leak
before you get stranded. Made for off-road tubeless tires, these also work well for SUV,
wheelbarrows, mowers, and almost all cars.
 

Size No.DiameterLengthPacking Carton SizeGW
6*100mm6mm100mm5pcs/card  6cards/box ,120box/carton51*41*28cm14kg
5. 5*100mm5.5mm51*41*25cm14kg
5*100mm5mm14kg
4.5*100mm4.5mm13.5kg
4*100mm4mm13kg
3.5*100mm3.5mm51*41*18cm13kg
6*200mm6mm200mm5pcs/card  6cards/box ,60box/carton51*41*28cm14kg
5.5*200mm5.5mm51*41*25cm14kg
5*200mm5mm14kg
4.5*200mm4.5mm13.5kg
4*200mm4mm13kg
3.5*200mm3.5mm51*41*18cm13kg 

we have advanced Equipment and can promiss to produce the best quality according to our customer's markets!
We can produce different sizes tire repair seals , and also we have OEM service ,which can help many distributors to make their own design with their brands !




How to Use it ? 

1. Locate puncture and remove puncture object.

2.Put probe onto tire fixer and locked with bolt.Apply rubber cement over surface of probe,insert it into injury and work up and down.To clean and lubricate injury.
 
3.To replace eye needle with probe on tire fixer,then insert PX PUNCTURE PLUG/SEAL and roll centre of plug/seal into eye of needle.
 
4.Apply rubber cement over all surface of eye needle.
 
5.Insert tire seal into injury of tire (nail hole) remain 5m/m plug /seals outside,turn 1/4 and remove the needle.
 
6.Cut tire seals 5mm from tread,but do not stretch.Tire is ready to inflate.

Company information: 


Advantage&Service :

1.200 hours salt testing,strong and powerful using

2.Various sizes available,high corrosion resistance

3.Good reputation,outstanding service,professional quality control

4.The material is non-lead products,eco-friendly

5. Customized design is welcomed

6.We will offer 24 hours online service and reply customers in time.
 
7.We can design the products as customers' requirements.
 
8.We can provide free samples.
 
9.We will provide samples of new series of products for the former customers.

FAQ

 

ContiSeal System

ContiSeal System: Puncture-free tires for mass production

Thanks to the innovative ContiSeal technology, punctures repair themselves. The inner lining of the tire is coated with a viscous and sticky material that instantly heals damage up to 5mm in diameter caused by nails and other sharp objects. This eliminates most of the damage. The binder prevents the loss of pressure in the tire even if the object that damaged it has been pulled out. And this means that you do not have to stop the car, even if you have a punctured tire. However, in the event of a puncture, you should definitely consult a specialist who will inspect the tire and decide if further repairs are necessary. Tires made using the ContiSeal system have a nail symbol on the sidewall. These tires are compatible with all existing rim sizes.

In the event of a puncture, the ContiSeal binder instantly wraps around the object that damaged the tire and thus prevents loss of pressure in the tire.

The benefits of ContiSeal are obvious

  • Eliminates punctures up to 5mm in diameter caused by sharp objects
  • Eliminates a puncture even if the object that damaged the tire has been pulled out
  • With careful driving, the road performance of the car does not deteriorate when a puncture occurs
  • 225/45R18 95W XL FR ContiSportContact 3 ContiSeal 
  • 235/40R18 95W XL FR ContiSportContact 5 ContiSeal 
  • 235/45R17 94W FR ContiSportContact 5 ContiSeal 
  • 205/55R16 94V XL ContiPremiumContact 2 ContiSeal 
  • 255/40R21 102Y XL FR ContiSportContact 5 ContiSeal
  • 285/35R21 105Y XL FR ContiSportContact 5 ContiSeal
  • 215/55R17 94V0012
  • 205/50R17 93V XL FR ContiEcoContact 5 ContiSeal 
  • 215/55R17 94V ContiEcoContact 5 ContiSeal 
  • 215/55R17 94W ContiPremiumContact 5 ContiSeal
  • 235/45R18 94W FR ContiSportContact 5 ContiSeal 
  • 245/45R18 96W FR ContiSportContact 5 ContiSeal 
  • 205/55R16 94V XL ContiPremiumContact 5 ContiSeal 
  • 205/55R16 94H XL ContiEcoContact 5 ContiSeal 
  • 225/55R17 97W ContiEcoContact 5 ContiSeal 
  • 235/55R18 100V FR ContiContact TS 815 ContiSeal 
  • 195/65R15 95H XL ContiEcoContact 5 ContiSeal 
  • 225/45R18 95W XL FR ContiSportContact 5 ContiSeal 
  • 225/55R17 97W ContiPremiumContact 5 ContiSeal 
  • 255/45R19 100V FR ContiSportContact 5 SUV ContiSeal 
  • 255/40R20 101V XL FR ContiSportContact 5 SUV ContiSeal

Barbs for tire punctures

rrdx

The question of using barbs somehow crept into my head unobtrusively.
Anything can arise in ordinary life, what can they say, everyone knows how much bully and crime we have on the roads, then the garage was either propped up by the car, then it was cursed for a parking space, they can kick a bug to a person if he signaled to a difficult brow. Thorn as an alternative to the fight against morons, I think it is a well-founded and effective measure. But in the conditions of a BP, especially with transport mobility, this device is indispensable - you can cut off the approaches to the camp, drop it when following, "scatter it on highways and then loot" - the latter, of course, is too much for me personally.
Maybe someone has some suggestions, application experience, maybe someone has an idea, a diagram of how to fix it yourself.

ScrewDriver78

rrdx
But in BP conditions

There will be no gasoline in BP conditions, so the topic is irrelevant. We will ride everything with a fart ferry.
And whoever has gasoline in the conditions of the BP, he will put you on a scarecrow for this thorn and hang you over the gate.

why111

http://sfw.org.ua/1148964944-shpionskie-shtuchki.html

WerWolf_X

Barbs for tire puncture (

Garlic" you never heard? I knew as a child in the 80-t-shaggy year.
It is wound with the help of a vice and pliers from ordinary nails.

rrdx

More details please!0004 rrdx

There will be no gasoline in the conditions of the BP, so the topic is irrelevant. We will ride everything with a fart ferry.

And there will be a couple of thorns on the fart steam if the last benz is taken away.

ScrewDriver78

rrdx
More details please!

http://en.wikipedia.org/wiki/Ch...new_obstacle)

Not very effective against tubeless tires - the tire will go down, but not very soon, and if you're lucky, it won't go down at all. Anti-automobile must be boiled from tubes so that there is a hole.
I think the f5 steel brake pipe will work well. Or copper, then solder.

rrdx

Tubeless, by the way, also lowers well, even from an ordinary self-tapping screw; I saw on TV but I don’t remember the scheme of bending a sharpened steel bar, it is produced industrially and used by special forces.

ScrewDriver78

rrdx
even from an ordinary self-tapping screw

A self-tapping screw is another matter, there is a thread, it poisons it. And with a nail, you can skate the whole season and not notice.

umarex

"garlic" from the tubes "opens" even a tire with a sealant inside. All four tubes have an internal channel of a decent diameter.

rrdx

And with a nail, you can skate the whole season and not notice.

Depending on which nail...
In general, you need to have 2-3 sets of hedgehogs.
Loot on the highway with small ones, larger ones, scatter
km in puddles. so for 5 from the camp. Well, if the enemies are in the Urals and armored personnel carriers, you will agree that this is a completely different case.

YURAN-99

Purchase or make your own to protect the perimeter from wheeled vehicles of the hedgehog-diana type http://www. prodps.ru/index.php.. .ibdd&Itemid=321 convenient medium, unfolded-folded and, unlike "garlic", can be quickly rolled up...

DMV

Watch TV 😊 on discovery there were stories on this topic... stop. ala new special means of the US police.

udarovod

It will be very interesting to see how the vehicle will poke caterpillars with thorns during the BP.

Boatman61

In dark totalitarian times, some oppressed children worked part-time at the warehouse, knocking down or dismantling wooden packing boxes. I had to disassemble large boxes from good boards. Enti boxes were knocked down with sheet metal brackets in the form of the letter P: the crossbar of the letter is longer than the legs, and the legs themselves are in the form of a dovetail. Once, several staples were thrown into a huge puddle through which trucks and forklifts drove. It was then that their magical properties appeared: the staples pierced the slopes without fail, and it was so great that some cars got stuck in a puddle. After that, irresponsible children threw staples on purpose to argue whether the car would pass or not. Everyone had a lot of fun, except for the drivers.

Taraz999

After that, irresponsible children threw staples on purpose to argue whether the car would pass or not. Everyone had a lot of fun, except for the drivers.

would decrease 😊

Kirakir

Garlic. Eat for health!

Max-Rite

I raised the topic, I want to ask a respected hivemind - does anyone have real developments with homemade spikes? Particularly interested in tubular varieties for quick deflation?

Fox7

in the film "Special" the manufacturing process of the device is shown in sufficient detail.

Max -Rite

criticize

Max -Rite

Fox7
The process of manufacturing a devius is shown in sufficient detail.

What series?

Tor191

These were used by the GTA gang.


Actual and very useful pieces, we need an extremely cheap and easy-to-make sample, for preventive wearing in styling.
Need low visibility and reliable operation on unpaved forest roads.

Interestingly, the assembled anti-personnel petals (PFM-1) and laid out on the road will work reliably on wheels?

wandergraft

in the TV series "Better Call Saul" making the end of the 8th episode of the 2nd season. Application at the beginning of 9toy. It's not difficult to make houses from improvised means!))

Max-Rite

Max-Rite
does anyone have any real experience?
Fox7
in the film "Spets"
WanderGraft
in the series "Better call the salt"


N? Kolauskass

, there is. but they were made not so much against equipment as against enemy personnel. forged 2 pieces of bar and then joined by welding. from wire and nails - unreliable. they tried it from sheet metal - you need a fire cutter.
http://cf.ppt-online.org/files...LEH/slide-4.jpg
our design is the one below. there is also an option, but not for publication here.

N?kolauskass

the design is quite effective, falling as you like, immediately becoming a hot man up. according to the "users" - "the cry of a separatist who stepped on her, resounds for 3 kilometers" (c).

Fox7

So it's not like "Specialists" here. I don’t need it, I remember the plot, because shows the manufacture of this device "on the knee". The design is similar to yours, only the tubes are inserted into the base at a slight angle.

Hunt70

Max-Rite
Criticize

big SUV wheels deflate slowly. Somehow I caught a sharpened trihedral file skated with it for six hours until the wheel was blown away. I pumped up and without changing the wheels I drove to the service. On two wheels pierced by nails otezdil a couple of days periodically pumping up.

kirin58

found garlic in the area of ​​the Vyazemsky cauldron, the Germans dropped horses and vehicles from aircraft against the infantry. 0005

Fox7

Hunt70
large SUV wheels deflate slowly. Somehow I caught a sharpened trihedral file skated with it for six hours until the wheel was blown away. I pumped up and without changing the wheels I drove to the service. On two wheels pierced by nails otezdil a couple of days periodically pumping up.

So the pin is not solid, but from a tube cut and sharpened at an angle. The air comes out quickly through the tube.

Max-Rite

Hunt70
large off-road wheels deflate slowly. Somehow I caught a sharpened trihedral file skated with it for six hours until the wheel was blown away. I pumped up and without changing the wheels I drove to the service. On two wheels pierced by nails otezdil a couple of days periodically pumping up.

Therefore, I plan to use tubes, not nails or rebar, and stick in a bunch so that at least two tubes go into each wheel.

N?kolauskass

http://nepropadu.ru/uploads/im...3/31/c7e4ba.jpg
spike construction from a tube. I want to try to make such a

Hunt70

Max-Rite
Therefore, I plan to use tubes, not nails or fittings, and stick a bunch of

only if it makes sense from the tube wheel.

like this, foresters in the Crimea (still Ukrainian) scattered. The photo is not mine, but according to those who ran over, the tires were immediately replaced.

Cipolat

Theoretically, I see the lack of scattered, not fixed in the ground, "thorns" in the fact that they are steel, and therefore the most cunning g-nukes can hang magnetic ones in front of their wheelbarrows pickers and collect the entire crop of "thorns" before they get under the wheels.
Of course, this is relevant to the PSU, while there are neodymium magnets of various shapes, sizes and strengths on the market. 😊

danc

Max-Rite
Criticize

probably two rows would be better than one. and even if a rigid base is bad. I don't remember where I heard it, but it was like that. either it flips or something else. I don’t remember, but I’m too lazy to look)
in regular means, the tube jumps off the hinge and remains in the wheel, due to which the air comes out quickly. that is, if you do it handicraft, then it probably also makes sense to file the tubes or something

catton007

to make hedgehogs on the basis of segments from rod mowers, combine harvesters. in the village - dormovoy material. makes not a puncture, but a cut

FaceGrabber

You can stick it directly into the road. The dupel is hammered lightly into the asphalt, and pulled out into the light. There is a hole left. You can insert a nail without a hat into the hole, with the tip up. Holes can be pre-drilled. Not visible on the road.

Tor191

lack of scattered "thorns" that are not fixed in the ground

Hmm, and if there is time for a calm disguise of the product?
Make something technologically primitive, with a wooden base and a sharp tube inserted into it.
Dismantled for transportation and put in a backpack.
Or just hammer the pipe into the ground and cover it with forest debris?
Although, for dirt, it won't run through without a base.
Puddles in a rut are all bypassed on the side of the road, there seems to be a good place for installation and camouflage.
Here we must also remember about auto-inflating wheels, such as on the GAZ-66 or modern military models.

I saw how people play with cartridge cases, substituting them under the wheels while the car is being inspected, the pepelats leaves with the cartridge case inserted into the wheel, sometimes you can even hear how the bottom of the cartridge case touches the asphalt when the wheel rotates.
There are no visible problems with deflation, maybe everything happens later. A kind of mixture of a snake and a hedgehog))) Can be cut into pieces of the desired size. I think that when hitting such a hose, it will wrap around the wheel perfectly.

Max-Rite

How long do you think the spike should be?

Max-Rite

danc

and even if a hard base is bad. I don't remember where I heard it, but it was like that.

I will drill holes in the board and put the spikes in tension. Should get stuck in the rubber on impact.

biryuk71

Plus for the hose. In general, I rolled it out on the track. Did not come in handy - wound up in the trunk. But scattering is also needed.

Max-Rite

biryuk71
Plus for hose. In general, I rolled it out on the track. Did not come in handy - wound up in the trunk. But scattering is also needed.

It seems to me that pieces of hose with nails are not the most reliable system. Depending on how to run over, it will bend and no nails will enter.

biryuk71

Sorry to clarify, I would make the placer welded, normal. It’s probably more convenient to sow on asphalt from a car, but I would experiment with a long hose - it’s painfully convenient. Hmm, but as an option: in the RTI store we take 10 meters of rubber, 6 mm well, we put it on strips - yes, the same cm 15. We sharpen full-threaded bolts from the household store and twist them with washers at any frequency. It will turn out lovely 😊 Of course, a tube would be better instead of bolts like on "Diana" in my opinion 😞

Axl_ural_1_52

On "Diana" the tube breaks from fastening during a puncture and remains in the wheel. Conditionally - the fastening of the tube to the tape goes on a "snotty" wire.

Magnum_357

We cut the steel pipe for supplying air to instrumentation devices with the help of a female grinder, drill (or cut everything with the same grinder) holes for air bleeding, cut the "blunt" side with a cross, we bend the resulting petals under 90 degrees and fasten even in a hose, even in a canvas fire hose, even on a board... operations.


biryuk71

biryuk71 9too late Rite
How long do you think the spike should be?

7.5cm

Axl_ural_1_52

Max-Rite
It seems to me that pieces of hose with nails are not the most reliable system. Depending on how to run over, it will bend and no nails will enter.

1) Product 'Hedgehog'. It is a nylon or tarpaulin tape on which steel spikes are fixed.

Length -7 m; width - 0.131 m; weight - 13 kg.

The disadvantage of the product 'Hedgehog' is that the stud that pierced the tire pulls the tape along with it and it wraps around the wheel. Removing the tape from the wheel is a very laborious operation. The item 'Ezh-M' ('Diana') is free from this shortcoming.

2) Product 'Ezh-M' ('Diana'). It is a parallelogram device of variable length and width, assembled from steel plates with removable spikes installed on them. When pressing on the spike with a car wheel, the upper pointed part of the spike pierces the tire, and the lower part cuts off the locking pin that holds the spike on the plate. That is, during the further movement of the car, the spike is in the pneumatics, and the 'Ezh-M' product remains on the road and, at the same time, the possibility of winding it on the car wheels is almost completely excluded, as is the case with the 'Ezh' product.

drafi

Instead of tubes, you can make a longitudinal cut in the bar. Poison air will not be worse, but at the end of a pair of transverse, at different levels, so as not to jump out of the tire immediately. The prepared bar is 8mm in diameter, 5-6cm long, welded to the square with a side of 4cm + -, the thickness of the square is 4mm. When scattered, according to the principle of a tumbler, most get into a combat position. But even a collision with a lying product causes tire breaks.

Accursed

I found one malicious link here http://www.ecoethics.ru/old/b39/0701.html

But on a wet primer, I think garlic is ineffective...

AlexandrDok

And if you combine the bar with the tube put on it?
With the same cut sleeve 😛?

SЁM

Water pipe 1/2", pieces of ~ 7 cm, a thread is cut at one end, the second is cut off at an angle. Where the thread is, put a larger washer and two nuts.
You can buy ready-made sleds.
If there is a 1/2" tap, then make the washers with threads, just screw the tubes there (then 5 mm threads are enough on the tubes).
Instead of a thread, you can use electric welding, if any.
bend the iron (with a chisel) so that the tube does not immediately fall out of the tire. 0005

1. For slow piercing of garlic from a nail from 150mm or more. Cut off the hat with a chisel obliquely, bend both ends at a right angle in a vice, so that both ends are also in the plane at an angle of 90. The picture was cut out from the Internet because it was very simple and effective.

2. for quick puncture - a tube with a diameter of 5-15mm sawn obliquely in pieces of 4-6cm. the tube is stuck into a piece of microporous rubber or similar material. How not to throw always the tip will be up

Tesla380

Collapsible thorn-triangle made of sheet steel 3mm + second triangle in both slots connect two triangles with slots all.
A triangle with a side of 25 cm is perfectly used as a throwing one, when two are connected, a spike is obtained that pierces the tire of the Urals.

terranin

Hunt70
The meaning of the tube will only be if it remains in the wheel.

like this, foresters in the Crimea (still Ukrainian) scattered. The photo is not mine, but according to those who ran over, the tires were immediately replaced.

Exactly the same, for replacement. In our forest, activists use just such a construction against quaders. The cut is wide enough, the tire is blown off by the moment

http://zabarankoi.mirtesen.ru/...-obochechnikam!

Valery22

terranin

Just like that, for replacement. In our forest, activists use just such a construction against quaders. The cut is wide enough, the tire is blown off by the moment

http://zabarankoi.mirtesen.ru/...-obochechnikam!

If there was such a thing selective...

terranin

Valery22

If such a thing were selective...

9

FaceGrabber

The disadvantage of the 'Hedgehog' product is that the spike that pierced the tire pulls the tape along with it and it wraps around the wheel. Removing the tape from the wheel is a very laborious operation. The item 'Ezh-M' ('Diana') is free from this shortcoming.

Is it a disadvantage? It wraps up and stops. You can still ride on a tire with punctures, a kilometer or two.

By the way, evaluate the passage from the hoodlit, who is in the subject.

If you drive several rebars into the ground, stretching them along the road for six meters:

Yes, attach a solid piece of iron to them: fittings:

What will come out?

A peculiar 'beard' of MZP crossing the roadway in a section six meters long.

And why is it dangerous for a car? Isn't that a person walking? What is there to get confused - there are no legs ?!

Yeah:

Many (including us) thought so. So far, at the beginning of the 2000s, cunning guys from one cunning office did not offer such a thing to the FSO. Then there was a case - one pensioner on 'Moskvich-2140' tried to drive to the Kremlin. As a matter of fact - and passed. As long as the fashionable 'Volga' hadn't blocked his way, he would have been skating. For such cases, a device was required that reliably blocks the movement of any vehicle. These are the kids who are hustling. Initially, they were dismissed - nonsense, they say. But the guys turned out to be punchy, got through to the leadership. Those condescendingly chuckled - demonstrate. Stop at least a trivial 'ZIL-130' like this.

To publicly shame the upstarts, one of the leaders of the selection committee, a full colonel, got behind the wheel of the truck. Cunning guys slipped him a motorcycle helmet - you never know what: He snorted, but still took the helmet. For which he soon gave thanks to the Lord.

For a truck that stopped at full speed, in the truest sense of the word, reared up - on the hood. Just didn't roll over. The driver took out the windshield with a helmet and miraculously did not suffer - the seat belts also helped.

So the guys 'washed' all the authoritative specialists. No car, even on wheels, even on anything, has overcome this nondescript barrier. I got stuck in figs, so then I had to bite this thin wire one by one with wire cutters. From everywhere - even from the cardan!

True, the device was never accepted for service - undignified and ugly. Yes, and worth it: mere pennies. This emzepish procrastination was so fucked up that it was no problem at all to get it. Carry tons! Therefore, it was not possible to make money on it. That didn’t work:

Tor191

If you drive several rebars into the ground, stretching them along the road for six meters:

Labor-intensive and time-consuming installation is not ice at all.
The very installation of such garbage already, as it were, suggests being on enemy territory, it’s not worth shining on the road for a long time.
I set it up, covered it with foliage, a branch, and went about my business.
We need a mobile gadget, with installation and masking of a place in 15-20 seconds.
By the way, if you wind hedgehogs out of a fidget, it has cool thorns-blades, though you have to paint the product from a spray can, it's too bright.

The above hose as an anti-personnel gadget?
In general, the Vietnamese things from holes and boards with nails are quite interesting.

And by the way, the question is how and with what to stop a snowmobile, the cable against motorcyclists will not fail, in the forest the speeds are not the same.
I know a case when a man in a car (VAZ four) was almost pierced by a fitting, "successfully" went to a construction site at night.
He told me that the car somehow "strange" went, managed to slow down when it came out almost to the steering wheel))
Probably something like that should be put in a place suitable for a snowmobile.

The second "snowmobile-chasseur" version - a small gift from a water pipe and a canister cartridge on the 12th, will work after, in the back.
As a universal PSU, the product is also quite suitable, compact, you can charge anything.
As an "automobile" version too - the capabilities of the 12th allow you to break through not only the wheel ..
There are two ways - electronics and mechanics, the electric version is more compact, omnivorous for installation with spacing
(fishing line, pressure, radio channel, as a trap in the premises , stop signals on the trail, road or on the way, forest breadwinner, etc.) + easier to manufacture.
But as a long-term and especially winter installation - here you need a mechanic, with a trigger something like a shooting handle, a working direction - you can go to the wheel, you can go to the driver's seat.
It is better to replace soft buckshot with a harder material, counting on a good barrier effect.
The driver took out the windshield with a helmet and miraculously did not suffer - the seat belts also helped.


Learn more