€ 36.00
When working on the vehicle’s tyres and carrying out seasonal changing of tyres, you need to know the technical characteristics of tyres and wheel rims. You need to be in possession of proper inspection and mounting/dismounting skills, and you need to be able to advise the customer in safe operation and follow-up procedures. The vehicle’s tyres and wheel rims will give trouble-free service when the tyre and rim condition is attended to by a properly trained tyre-and-wheel professional.
As regards the work and its technical content, there is plenty of information, guidance, experience, and opinions available, both true and false. That is why this study package will provide you with the correct and safe starting point for entering the tyre industry as a field of work.
You will get to know the technical characteristics of tyres, wheels and mounting/dismounting procedures of wheels/tyres, and the impact of the various choices made when doing this work. You will learn the basics of good customer service and be able to guide the customer to make better and safer choices, better and safer vehicle use, and adopt correct further measures.
Find the correct work methods and tools to use in changing wheels/tyres. The steps are shown implemented in two ways: as done by professionals and as done by DIY people. You will notice differences in how the job is done and be able to identify those work stages where most of the DIY mistakes happen.
The focus of the “Basics of tyre work” section is on learning the correct sequence of work stages in removing and refitting tyres/wheels, and how they are carried out in the proper manner without causing damage to tyres and rims.
The course of study includes plenty of pictures of the work stages, and together with the cross-sectional presentation progressing with the work, they serve as a guideline to the actual trainee stage.
In the section “Wheel Balancing” you will learn how wheel imbalance impacts on wheel behavior and how wheel imbalance can be rectified using the right tools and accessories. Study is supported by topic-specific sets of questions and a printable material with applied practical tasks.
Open Product Sheet (PDF)
After completing this online study module, you will be able to carry out inspections of tyres and wheels, understand the work operations required to change a vehicle’s wheels/tyres and perform tyre balancing for the most common vehicle wheels and tyre types.
After completing your module of study and approved completion of the exercises, you will be allowed to take the final exam. After completing the final exam, you can print a Prodiags certificate from your attainments register as proof of your expertise.
Open Product Sheet (PDF)
To fully benefit from your study, you have to be competent with using the tyre work equipment placed at your disposal, and be familiar with use of the equipment in accordance with the equipment manufacturer’s instructions.
This course’s topics and objectives correspond in scope to a conventional 1.5 – 2 day training event.
Once you have made your payment, you get immediate access to the content in the form of a license valid for 12 months. You’ll save time and money by not needing to travel.
Internet connection and PC or laptop with browser. Recommended screen resolution 1024 x 768 or higher.
We want to make sure that you always have the latest version of our product.
Prodiags reserves the right to make real time updates and changes.
This way you’ll always have the best version, without extra fees.
Open Product Sheet (PDF)
1/4 – I’m a mechanic and I want to direct the payment for the training to my foreman, how can I do this?
Open/print out the link’s instructions.Printable order instructions (PDF)
2/4 – How can I provide my mechanics with useful training for example when a customer cancels an appointment?
Read more about the benefits >> Workshop Manager
3/4 – What knowledge is required from me in order to provide added value to my training event with pre-learning and online material?
Learn more >> Trainer / Teacher
4/4 – How can I share and present Prodiags products to my community?
Open Influencer Form >>
Out of sight, not out of mind - Fitting and balancing wheels at a customers own premises can be challenging. Mobile Tyre Technician provides the skills to provide excellent customer service, in a safe and reliable manner.
Offering you peace of mind, that your technicians are adhering to professional industry standards when working off site. The Roadside recovery element is essential for technicians carrying out wheel removal and replacement at the roadside and have yet to receive formal training. On passing the course it will provide them with an industry recognised accreditation and offer peace of mind to employers and customers alike that the technician is aware of the safe working practices when working safely at the roadside.
Out of sight, not out of mind – Fitting and balancing wheels at a customers own premises can be challenging. Mobile Tyre Technician provides the skills to provide excellent customer service, in a safe and reliable manner. Offering you peace of mind, that your technicians are adhering to professional industry standards when working off site. The Roadside recovery element is essential for technicians carrying out wheel removal and replacement at the roadside and have yet to receive formal training.
On passing the course it will provide them with an industry recognised accreditation and offer peace of mind to employers and customers alike that the technician is aware of the safe working practices when working safely at the roadside.
By the end of the course, you will be able to:
Code - 102
Booking Form
September 7, 2022
December 13, 2022
Tire fitting courses are in high demand, as are tire fitters themselves (tire fitters). Individual specialists are increasingly required for straightening and rolling discs, changing tires, and repairing them.
Universal tire fitters and tire fitters who know how to find an approach not only to cars, but also commercial vehicles, including special equipment, buses, "heavyweights" - trucks, road trains, tractors, are especially valued.
Tire fitting services are relevant in a variety of situations, for example:
Responsible training in tire fitting and balancing avoids a number of mistakes, among them:
Ideally, a specialist who has undergone comprehensive training in tire fitting and wheel balancing should have the following things bounce off their “teeth”:
One of the problems, if you want to get comprehensive knowledge and improve your skills in the field of tire fitting, is to find a suitable training center. Still, the direction is highly specialized, and it is not so easy to find it near the house. But thanks to modern technology, there is no need to look for tire fitting courses in Tyumen, a specific area of \u200b\u200bthe vast St. Petersburg, or even more so Moscow. You can purchase access to the electronic interactive program Tires, wheels and tire fitting on the ELECTUDE platform.
Classes are available from anywhere in Russia, and not only in Russia, but also in other countries (the course organizers have representative offices in Belarus, Kazakhstan, Ukraine).
The software product is focused on modular learning. The program includes 16 training modules. Particular emphasis is placed on the arrangement of vehicle wheels, service operations, including maintenance and operation of discs, tires, tire pressure monitoring system. Estimated time for studying the material is 10 hours. But please note: this is an average time. Everyone can work at the most convenient rhythm for themselves and master the program at a more intensive or “stretched” pace.
In addition, it is important to understand that this is not just training, but a comprehensive certification system. Therefore, service station training centers have every opportunity to not only train specialists, but also organize an objective assessment of their competencies, and select worthy personnel for the tire repair area.
Certification system, “sharpened” for tire fitting, is 15 special test modules. The total time for passing the certification is 3 hours.
Negotiable
| Employment | Complete |
| Schedule | Full day |
| work experience | No experience |
| Education | Any |
Need a tire fitter in Samara.
Requirements: work experience from one year. Knowledge of equipment.
Responsibilities: installation, dismantling, rolling. cooking.
Conditions: work in the Soviet district. Payment of 40% of the proceeds. Working day from 08.00 to 22.00. The tire shop has been running for eight years. There is always work to be done, no matter the pandemic. Traveling place, own accumulated client base.
Samara.
If the phone is not available, try sending a resume
Online Book of Changes
Share:
| Tire fitter needed Samara The company needs a tire fitter in Samara. 45 000 November 01 | 45 000 November 01 | |
| Tire fitter Samara We are looking for a tire fitter in Samara. To Kuibyshevsky district requires a tire fitter and assistants for the season, training is available. Good permeability. Ability to vulcanize and straighten discs. Communication is a must. Equipment: hofmann, teco, sivik-galaxy plus. There is an exit.  |
Employer Description: Requirements: desire to work and earn money, punctuality, responsibility and communication skills. Responsibilities: performing tire fitting works: dismantling, mounting, balancing, tire repair, side repair. cuts, doshipoka wheels. Conditions: timely payment, new 
