Ask a question, get an answer ASAP!
GET A QUOTE
Tire Patch Cost
Service Location
Price range for all vehicles
(171,627)Flat tires are an inevitable part of owning a car. Changing a flat tire can be difficult and requires several different tools that you might not have handy.
Fix-a-Flat is a convenient option for plugging the hole in the tire once you’ve identified where the damage is located. It allows you to drive your car safely to the closest gas station where the tire can be filled and repaired properly. It is advisable to keep a can of Fix-a-Flat in your car at all times so that you’re not stranded the next time your tires lose air due to a hole or some other type of damage.
If your car is equipped with tire pressure warnings, please consult the manufacturer before you use an aerosol tire sealer like Fix-a-Flat.
Here's how to fix a flat tire using Fix-a-Flat:
Gather the correct materials - In order to use Fix-a-Flat, you will need to purchase one can of Fix-a-Flat
Stop the car in a safe location - If you’re driving, pull over to a safe location on the side of the road or into a parking lot.
Identify the source of the leak - Once you realize your tire is losing air, it’s important to identify where the leak is coming from. That way, you can decide whether Fix-a-Flat is the appropriate method for repairing your tire issue.
Identify the damaged tire - The damaged tire will look visibly deflated compared to the other tires.
Warning: Fix-a-Flat is not designed to repair completely flat tires. It is also not designed to repair large tears or cracks in sidewall. It should only be used as a temporary solution until the tire can be replaced or a spare tire can be installed.
If the tire is too damaged, get a certified mechanic, such as one from YourMechanic to put on a spare tire instead.
Look for the tear or hole in the tire - Sometimes, this spot will be obvious. If you’ve driven the tire over a nail or if some other object has torn a hole in the tire, then you will probably be able to find the hole easily. Make sure that the damage is not too extensive and not larger than ¼ of an inch.
Open the tire valve - Unscrew the cap of the tire valve and place it somewhere easy to find because you will need to put it back on after repairing the tire.
Prepare to seal the tire - Shake the can of Fix-a-Flat to get it ready for use.
Attach the Fix-a-Flat nozzle - Screw the Fix-a-Flat nozzle onto the tire valve. Make sure that it is secure. You will begin to hear air inflating the tire when the nozzle is completely secured on the valve.
Warning: Fix-a-Flat is designed so that the entire can is emptied into one single tire. Do not use the same can on several different tires.
Close the tire valve - After the can is completely emptied into the tire, unscrew the nozzle and replace the valve cap on the tire.
Drive the car immediately - It’s important that you drive your car immediately after using Fix-a-Flat to allow the tire pressure to increase and distribute the sealant evenly on the tire. You should only drive the car about 2 to 4 miles after sealing the tire.
Inflate tire to recommended psi level - The psi level of a tire is the manufacturer's recommended pounds per square inch level for a tire. After using Fix-a-Flat, you may still need to inflate the tire with air so that it reaches the recommended psi level.
Drive to the nearest air pump
- Any nearby gas station should have air pump.
Fill the tire - Pump air into the tire up to the recommended psi level, checking it frequently with a tire gauge.
Tip: Refer to your car’s manual or check the manufacturer’s website to find the recommended psi level for your car’s tires. The correct air pressure will also be listed on the tire placard attached to the vehicle door edge, doorpost, glove box door or fuel door.
Using Fix-a-Flat is a temporary solution and your tire will need to be replaced or repaired by a professional. It’s important to let the person repairing your tire know that you’ve used Fix-a-Flat so that they know that your tire is sealed with aerosol gases and not just air.
If you notice that some of your car’s tires show uneven wear or if they lose contact with the road, get a professional mechanic, such as one from YourMeechanic, to inspect them as soon as possible.
The most popular service booked by readers of this article is Tire Patch.
YourMechanic’s technicians bring the dealership to you by performing this job at your home or office 7-days a week between 7AM-9PM. We currently cover over 2,000 cities and have 100k+ 5-star reviews... LEARN MORE
SEE PRICING & SCHEDULING
flat tires
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
4.2 Average Rating
Service Hours
7 AM - 9 PM
7 days a week
Phone Number
1 (855) 347-2779
Phone Hours
Mon - Fri / 6 AM - 5 PM PST
Sat - Sun / 7 AM - 4 PM PST
Address
We come to you at no extra charge
Guarantee
12-month/12,000-mile warranty
Our certified mobile mechanics perform over 600 services, including diagnostics, brakes, oil changes, scheduled mileage maintenances, and will come to you with all necessary parts and tools.
Get a fair & transparent quote instantly before booking.
(
171,627
)
161,099
161,099
SEE REVIEWS NEAR ME
11 years of experience
585 reviews
Request Nicholas
Nicholas
11 years of experience
Request Nicholas
by Robert
Honda Accord L4-2.3L - Oil Change - Raleigh, North Carolina
Knocked it out in no time!
by Marc
Honda Pilot - Car is not starting - Durham, North Carolina
came early, done in an hour. did a great job on my 12 year old vehicle. highly recommended!
8 years of experience
23 reviews
Request Nestor
Nestor
8 years of experience
Request Nestor
by Denice
Hyundai Santa Fe V6-2.7L - Tire Patch (Driver Side Front) - Boise, Idaho
Right on time, very knowledgeable and helpful on what needs to be done next.
Thanks!
21 years of experience
1068 reviews
Request Pardeep
Pardeep
21 years of experience
Request Pardeep
by Ellen
Hyundai Santa Fe V6-2.7L - Tire Patch - San Jose, California
Very quick and efficiento
27 years of experience
275 reviews
Request Nazareth
Nazareth
27 years of experience
Request Nazareth
by Jesse
Chevrolet Express 3500 V8-6.0L - Car is not starting - Duarte, California
Very professional, highly recommended.
Our certified mobile mechanics make house calls in over 2,000 U.S. cities. Fast, free online quotes for your car repair.
GET A QUOTE
GET A QUOTE
How to Know What Tires to Buy
Your Your vehicle requires traction in order to accelerate, brake efficiently, and maintain control when you are steering.
In order to do those things well, you need to own good tires on your vehicle. There are hundreds of different tire...
How to Make Your Car Tires Last Longer
A new set of car tires is expensive. Make them last longer with frequent inspections, keeping them clean, and making sure the air pressure is correct.
How to Rotate Car Tires
Car tire rotation reduces blowouts and other tire-related car accidents. Tires should be rotated every 5k-6k miles or at every other oil change.
Passenger's side wheel vibrates
It sounds like you have a faulty wheel bearing. The vibration goes away when you turn because you are loading the bearing and taking up all of the play. Wheel bearings can be checked by jacking up the vehicle, and...
Uneven tire wear and excessive shaking in the steering wheel once hitting highway speeds.
Hi there, thanks for writing in. Based on your description of the symptoms and tire wear, it seems that your mechanic probably is correct. When the tie rod and ball joints (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-tie-rod-end) are damaged, they will cause the suspension to...
Bottome of vehicle makes a helicopter sound when driving at slow speeds
The sound you are hearing is related to the tires moving from what it sounds. The first thing to inspect is proper tire inflation. Tires make strange noises when they are low or damaged. Second needs to be the brakes....
Estimates
Services
Cities
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
1 (855) 347-2779 · [email protected]
Read FAQ
GET A QUOTE
Dear Car Talk | May 20, 2015
Dear Car Talk:
I'm wondering if you would comment on tire-repair-in-a-can products like Fix-A-Flat for emergency tire repair.
I am in the Navy and am trying to ensure that my wife has a backup plan to changing a tire if AAA is delayed for several hours (not a good thing with a 4-year-old in the back seat). Do these products work?
-- Jeffrey
They often do work. There even are a few small cars that come equipped with that stuff in the trunk.
In the first Fiat 500 we test drove, instead of a spare tire I remember finding a can of "flat fixer," a little air compressor and a bottle of Filippo Berio Extra Virgin Olive Oil. The oil must have been for dipping your bread in while waiting for the tow truck if the flat fixer didn't work.
If you have a small hole in the tire -- from a nail, for instance -- or a slow leak around the rim, products like Fix-A-Flat can work well as temporary solutions. The can contains a liquid that's injected into the tire, along with additional air. Once inside the tire, the slime hardens against the inside of the tire and, hopefully, covers up the hole.
But it's a temporary fix.
The idea is that it allows you to get off the side of the road and get home, or get to a tire repair place.
And it won't work for every flat tire. If you have a gash in your sidewall, or you backed over the spikes in a rental car return lot, or sustained any serious damage, a can of Fix-A-Flat is not going to help you at all. Unless, perhaps, you can stuff the can itself into the hole.
And there are other limitations to keep in mind. The stuff freezes when it's below 32 degrees. So if you live where it gets cold, and you keep it in your trunk, you may have to cuddle the can to your bosom in the passenger compartment for an hour or two until it turns back into liquid.
Also, there's not much additional air in that can. So if your tire is really flat and riding close to the rim, the contents of the can won't give you enough air to drive on.
You can address that by keeping a little compressor in the car, like the one Fiat provides. It's powered by the car's power point (aka cigarette lighter).
It's slow, but it gets the job done.
So, leaving a can of Fix-A-Flat in your wife's car, along with a compressor, is not a bad idea, Jeffrey. It may get her out of trouble someday. But because it won't work on every tire failure, you want her to have roadside assistance, too.
And even when it does work, make sure she knows that she'll need to get the car to a mechanic who can fix the tire properly with a patch or a plug.
Get the Car Talk Newsletter
The hardest thing is to start. In order to survive the repair with the least loss of time, effort and money, it is important to know what to do and in what sequence
Photo: Neva Towers, project of the INRE studio
We figure out together with an expert how to repair an apartment, especially if you have not done this before, whether to hire a designer and what issues to discuss with him.
The material was checked and commented by Evgeny Nedoborov, partner of the author's design studio INRE
www.adv.rbc.ru
It is necessary to assess the condition of the premises and its capabilities. In many cases, old apartments undergo major repairs with the replacement of electrical wiring and windows, but are often limited to new windows, doors, and wall alignment. Sometimes it is enough to carry out cosmetic work: to scrape the parquet or lay a new carpet, remove the wallpaper and paint the walls.
Overhaul includes:
If you find it difficult to estimate the extent of the repair and the necessary actions yourself, contact a specialist. It is not necessary to order a design project; You can choose the style and content of the interior yourself. But if the basic parameters are not fully developed, then a situation is not ruled out when a new cosmetic repair will be spoiled due to cracks in old windows or leaks in pipes. The duration, complexity and costs of the upcoming repairs depend on the number of works. The latter should be given special attention: the more plans, the more money will have to be invested in their implementation.
How to sell an inherited property: documents, taxes, nuances
With the help of cosmetic repairs, you can completely transform an apartment. If the budget is limited and a professional designer is not included in your plans, practice "watchfulness". This is best done by collecting examples on interior sites.
Think about what you like: bright colors or restrained minimalism, or maybe the brick walls of the house are ideal for creating a loft or you want to bring the design closer to cozy boho-chic. Save the selected photos to a separate folder on your computer or phone, highlight the characteristic features of the selected examples.
Photo: Neva Towers, project by INRE studio
Designers recommend focusing on interiors created in similar conditions: pay attention to the size of rooms and their functionality, window arrangement. Consider the architecture of the space - in a modern house it makes no sense to make stucco and bas-reliefs, but these details can be beaten if they already exist. If several people live in the apartment, coordinate the chosen styles with them so that everyone is comfortable in the renovated apartment.
Photo: Neva Towers, project by INRE
You can use special applications and online services for apartment design to choose the right combinations and further arrangement of furniture.
Explore trends and anti-trends: these lists often show innovative ideas that you'll love.
Apartment design project: how to create interiors and start renovation
Many tasks can be done on your own, but if you have no experience, it is better to entrust especially complex processes to specialists. Ultimately, this will save on rework and troubleshooting. You do not have to buy materials, expensive equipment and tools yourself. In addition, the work of a professional team is a great guarantee that cracks will not appear on the new ceiling due to non-compliance with the rules and painting technologies, and fresh tiles in the bathroom will remain intact.
It is better to entrust the installation of doors and windows, floor screed, electrical and plumbing work to specialists. You can paint the walls and arrange furniture yourself - this is a matter of desire, effort and time.
Photo: Shutterstock
When you decide on the design and content, you can proceed to the calculations and create a list of necessary building materials and consumables.
It is best to buy them with a small margin. So, if part of the wallpaper is damaged during unsuccessful pasting, you can replace it from a spare roll. In addition, the store may not have the selected tile left, and half a meter of plinth will have to be searched for and ordered with overpayments - bulk purchases are always cheaper. If it is difficult to make calculations on your own, contact professionals. Many companies provide a service for allocating the budget and purchasing everything necessary for repairs, even if you decide to do it yourself.
In addition to building materials and furniture, try to include small things and details in the list: lamps, additional shelves, carpets and decorative elements.
The estimate is useful even at the repair planning stage. You can use online calculators, build a shopping cart in online stores, and rely on your designer's advice. To make the correct calculations, you need to know the exact parameters of the room: the footage, the height of the walls, the location of windows and doors.
The contractor can make an estimate, but in any case, you must provide him with a measurement plan and agree on specific wishes for future repairs. Be sure to announce, or rather document, the types of work, technologies used, categories of building materials, deadlines and desired costs.
The desire to save money is understandable and understandable, but try to turn to professionals when it comes to security. It is better to entrust these repairs to specialists:
On average, a major overhaul will cost twice as much as a cosmetic one. But it's a long-term investment in occupant comfort and safety, and it's not worth skimping on.
After the development of the design project and the purchase of materials, you can proceed directly to the work.
The repair plan should reflect all measurements, layout, location of sockets, switches and lighting. It is best to start work with the most difficult and dirty: replacing windows, pipes, installing window sills. A lot of dust is generated during the rough repair process, so it is incompatible, for example, with tinting the walls in the next room. Often they start with redevelopment and erection of walls, and after laying the tiles in the bathroom, they move on to the kitchen. If you stay in the apartment for the duration of the renovation, make sure that dirt and debris do not spread throughout all the rooms. Be sure to pack your belongings and transfer them to storage from the room in which the work is being done.
Photo: Shutterstock
Try to stick to the work plan; step-by-step instructions will help you not to miss important points:
The tiles are laid after the bath is installed so that perfect joints can be made. Repair mistakes: how to avoid fines and not lose your apartment
Expert comments space and interior design.
First, all the “subtleties of life” of a person are clarified to the details: the number of children, the presence of animals, habits. For example, does the owner cook himself, what time of day does he spend more time at home, does he like to gather guests, does he or family members have hobbies, do customers collect art, who in the family is the first to start getting ready for work, and much more. Based on the set of scenarios, a further visual image is thought out.
The next stage of work is to identify preferences in interior design. This is followed by development and delivery in stages:
Planning decisions.
Styling solutions based on client references. It is important to remember that absolutely everything is impossible to “make friends”. Therefore, designers take into the project only key techniques and color solutions.
Working documentation becomes a drawing for builders. It includes: planning decisions; top, middle and bottom electrics; floor covering with height marks and joints; ceiling with knots and cuts; water supply and sewerage; furniture with basic overall dimensions; list of premises in square meters; wall sweeps indicating the types and types of application of finishing materials.
Design project.
The document is transferred to the customer and builders, which simplifies communication between all parties and significantly saves the budget. An approved design project allows the client to control costs, and it is more difficult for builders to confuse the client, since all the work is calculated. At the same time, the design project is a business plan for the client: he understands what he paid for and how the stages are closed.
Also, the design project allows you to make an estimate for the cost of materials and furniture manufacturing. We even have a special service in our studio, thanks to which you can predict expenses for a month, for six months. In any interior, there are background things that you can save on, for example, finishing materials (wallpaper, paint). But accent elements - chandeliers, furniture, handles - give the interior an individuality, make it unique, so we always explain to the client that high quality justifies the high cost.
If you want the interior to fully comply with the design project, be sure to use the service of architectural supervision. Only in this case, the quality implementation of the project is guaranteed. All those who work on the site - architects, designers, planners, engineers and electricians - solve only their own task. None of them pays attention to the connections and details that arise when solving work issues during the construction process.
And only the architect has a complete idea of how the interior should look like. In order for the project to turn out, you need to understand the nuances for which the author himself is responsible.
Now repair is safe and predictable. Quickly calculate the estimate, sign the contract online and pay for the work performed.
According to the planning decision, the contractor will pour the screed, erect partitions, level the walls, carry out water supply, sewerage and electrics.
Cost, including materials and work:
according to agreed your technical project, the contractor will make a fine finish, install doors, plumbing and sockets.
Cost including only works:
You can choose only the first step and order pre-finishing work, and order fine finishing elsewhere
4 Your money safe
Funds are held in a special bank account and debited in stages after your approval.
We work only with reliable companies.
The cost of repair work is fixed in the contract, and the whole process is reflected in your personal account.
All payments for repairs are made in a secure way: money is stored in a special account and debited with your consent if you accept the result.
Design
Repair calculator
How many rooms?
How many bathrooms?
Default ceiling height - 2.7 m
Support and assistance in resolving disputes is an important part of the service.
Regarding the quality of work, I am not an expert and my assessment will most likely be superficial.
Therefore, I will only say the facts: there are no complaints about the stage of pre-finishing work. The floor is leveled, the walls are plastered, smooth, white :). Finishing work: there are small comments, but not critical.
I want to note that the decorative plaster that worried me so much was applied with high quality and beautifully.
We bought a new building and ordered a design project. First, we met with the designer at the facility, and then we talked online - we coordinated all the drawings and renders, and chose materials for a long time.
The service has a lot of work to do, but secure and contactless payment is lovely! I didn’t have to worry once again and trust strangers.
I was introduced to the designer Anastasia, she drew the project of the apartment, gave her recommendations, listened and directed my thoughts in the right direction.
First I tried the prefinishing finish - whitebox. I still don’t remember the name of the company, because I didn’t do a search.
Responsible for the object Vadim Sivakov just space! When necessary, he kept abreast of events, in other cases he did not touch. When we finished, I decided that I would entrust the fine finish to the same company.
In general, this is not my first repair that is taking place, I knew for sure that I did not want to participate in it in any way, except for money.
M2 has a very cool and convenient payment option through a special account. In short, my money will not come to the contractor until the contractor does the job.
As soon as the contractor completes the work, and I accept them, I am ready to press a button in my personal account and the contractor receives money. Convenient and, in my opinion, as safe as possible for me.
Anastasia works with us on the side of your service - she monitors and controls the work of contractors very well.
The contractor himself also takes a very responsible approach to work, selects high-quality materials, meets deadlines, and conducts architectural supervision.
Your service is also very convenient, I like that the money is kept in the bank, everything is controlled and there is no need to run after contractors. Thank you very much!
I got to know your company through VTB Bank and, of course, this increased trust. I also had the experience of conducting a safe transaction through your company twice and was satisfied.
Then I received a mailing with a proposal for a repair and decided to try it. After communication and pricing policy, I was satisfied and tried to use your service. So far, everything is moving well and my designer Ksenia is working flawlessly!
The designer did a great job, no questions asked. Everything was on time, all wishes were taken into account. It was also convenient to use the secure payment system and the M2 website.
Deadlines met, I have no comments on the designer's work. Payment through the site is convenient, understandable. I would add the ability to print an invoice with a QR code.
Our repair is almost completed 🎉 we were very lucky with the team, the guys are neat, punctual, educated. Everything where you need to advise, prompt. They did it with soul and quickly! The result is pleasing, we are very pleased! Thank you 🙏🏼 I hope we will contact you again!))))
We have decided to slow down the repair for the time being, taking into account the current situation. We accept the project and work on the whitebox, there are a few nuances left to complete.
We hope to continue in the near future, when it will be clear how events will develop in the world. In general, we evaluate the work of the contractor at a high level. We liked everything.
Cases
Turnkey repair
Turnkey repair
Turnkey renovation
Turnkey repair
Turnkey repair
On a turnkey repair
Turnkey repair
7 m 2 Turnkey repair
Services
We will help you to accept an apartment and identify construction defects.
We will help you choose and order furniture for a comfortable life.
Consultation
We will help you think over and agree on the redevelopment.
How is the turnkey repair?
Apartment renovation on a turnkey basis is a complete arrangement of the apartment. You will have to equip the kitchen, bring and arrange furniture. An important difference between such a repair is the availability of an estimate and a technical project, which describes in detail the list of repairs. You will know the exact cost and terms of the repair before it starts.
Turnkey repair usually consists of several stages:
- Complete dismantling of the finish. The service will not be needed in new buildings where there is no finishing or there is only a rough finish.
— Pre-finishing: electrical wiring, plumbing, floor screed, wall and ceiling alignment.
— Fine finishing: installation of floor coverings, wall and ceiling finishing, installation of doors, skirting boards, plumbing, lighting and sockets.
— Garbage removal and construction dust removal. At the stage of project formation and estimates, additional options can be ordered: demolition and construction of partitions, sound insulation, installation of underfloor heating, air conditioning, replacement of windows and the front door.
Why do we need a design project?
Design project is a detailed plan of repair work agreed with you. It reflects all engineering communications, the location of furniture, plumbing, sockets and switches, and the area of the heated floor.
Also in the design process, finishing materials are selected and a list is drawn up indicating the article numbers. The nuances of working with materials are taken into account on the wall and floor sweeps.
The author's project provides for the development of a style solution with 3D visualization of each room, collages and selection of furniture.
To start pre-finishing work, the presence of a design project is an optional condition, work is carried out according to a planning decision, which is included in the cost of work.
The planning solution includes the arrangement of furniture and plumbing, plans for the location of lighting, sockets and switches.
What materials are included in the cost of work?
All rough materials are included in the cost of pre-finishing along with the work.
Draft materials include dry building mixtures, primer, plaster, putty - everything that will create a reliable basis for the finishing stage.
Finishing materials, such as: flooring, paint, wallpaper, tiles, are agreed with you as part of the design project and are not included in the cost of repair work.
