Written By: Hesham Annamer (and one other contributor)
Difficulty
Moderate
Steps
6
Time Required
30 minutes
Sections
1
Flags
0
If you have a wheel lock (wheel nut lock) on your car or truck wheel and do not have a wheel lock key, use this guide to remove the wheel lock.
A wheel lock is used to fasten the wheel on your vehicle, as a regular wheel nut would, but uses a part-specific key to unlock it. It is common to lose a wheel lock key. The wheel lock key can be removed manually.
Before beginning, make sure your vehicle is on a flat surface and all wheels are level. Make sure to have your emergency brake (parking brake) on as well.
No parts specified.
Hold the socket in place.
Use a hammer to hit the socket until it is tight around the lock.
Gloves are recommended to prevent hand injury.
Edit
Now that the wheel lock is off, it will be stuck to the socket.
Insert the screwdriver into the square-opening on top of the socket.
Hit the top of the screwdriver with the hammer a few times until the lock falls out of the socket.
Edit
Grab a regular wheel nut.
Screw on the wheel nut by hand.
Use the tire iron to tighten the wheel nut.
Edit
Almost done!
Finish Line
Cancel: I did not complete this guide.
3 other people completed this guide.
with 1 other contributor
Badges: 5
+2 more badges
com | abn wheel lock removal tool kit lug nut key set 16p saemetric master wheel lock key set lug key wheel lock removal kit Introducing the Price.com browser extension. Get the best price, coupons, and cash back. Add to Chrome
/
Shop All Stores
| Sold By | Price | Financing | Coupon | Cash Back | Earn Link | Condition |
|---|---|---|---|---|---|---|
com sooner! Access, protection
Keys and locks - general information
The standard equipment of the car without fail includes two sets keys, one of which (spare) should be kept in a safe place at all times outside the vehicle.
|
|
Each key fits all car locks, namely:
a) the ignition lock;
b) door locks;
c) glove box lock;
d) trunk lid lock;
e) handle for remote unlocking of the trunk lid lock.
Each set of keys includes a plate with the serial number of the set. Number may be required to make additional copies of keys in return lost. Keep the plate in a safe place, for guarantee, enter the number in notebook or keep it in your wallet with other documents first. need. To make additional copies of the keys, use only key blanks officially approved by Honda.
Remote control single electric lock
Some models may come standard or optional with single lock system. In such cases, the composition of each of the sets of keys is added keychain with remote control (DU) locks.
Engine immobilization system
The key head of models equipped with an engine immobilization system includes a microchip that disables the anti-theft device that immobilizes the engine.
| Damage to the microchip may result in the loss of the ability to starting the engine! Avoid excessive heat keys, do not leave them for a long time under direct sunlight; try not to drop the keys or put heavy objects on them; avoid exposure to moisture, wet kit, gently wipe dry with a soft cloth. |
Engine immobilization device
The standard anti-theft system of some models may include engine immobilization device (easier - immobilizer). The device serves to prevent unauthorized attempts to start the engine and is effective anti-theft agent, protecting the car from thieves.
The engine of a vehicle equipped with an immobilizer can only be started using a microchip-equipped ignition key. Encrypted in a microchip special code, and the anti-theft system only disables the lock if he is identified. Attempting to start the engine with any other key or a master key will disable the engine start circuit.
When the ignition is turned on (the ignition key is turned to the "ON" [II] position) the control lamp of the immobilization system lights up for a few seconds, then goes out.
The blinking of the indicator indicates that the system has not identified the code key. In this case, you must turn off the ignition (the key is in the "LOCK" position [0]) and remove the key from the lock, then try again.
| There is a possibility that the system will not recognize the key code located in the ignition switch if any other key with an integrated microchip. For reliable identification of the code, we advise you to keep each key in a separate link. |
If the system repeatedly refuses to identify the key code, contact Honda service station.
The immobilizer control lamp flashes also when the key is turned to ignition switch from the "ON" (II) position (ignition on) to the ACC (I) (parking) or LOCK (0) (steering column lock).
Do not attempt to make any modifications or additions to the design immobilizer.
This may interfere with the normal functioning of electronic systems. car and make it uncontrollable. In case of loss of the key and impossibility start the engine, contact a Honda Dealership.
Ignition switch
The ignition switch is located on the right side of the steering column. The key can take one of four positions in the lock:
a) LOCK (0) - blocking
b) ACC (I) - auxiliary consumers of electricity (parking position)
c) ON (II) - ignition on d) START (III) - engine start
II ON (ignition)
III START (start)
Position "LOCK" (O) - blocking
The key can be inserted into the lock or removed from it only in this position. When the ignition key is turned from the "LOCK" (0) position to the "ACC" position (I) the steering column is unlocked.
To turn the key from position "ACC" (I) to position "LOCK" (0), it is necessary preliminarily lightly press it, drowning it in the lock a little. In addition, on models equipped with automatic transmission, an additional condition permission to start is the mandatory transfer of the selector lever to the position "R".
The steering column is locked automatically when you try to turn steering wheel after removing the key from the ignition.
Steering column lock sometimes makes it impossible to turn the key to ignition lock. In such a situation, turn the steering wheel slightly to one side or the other (in order to relieve the load), while turning the key in the castle.
| Never remove the key from the ignition while driving! This will inevitably lead to steering column lock. and loss of control. |
In this position of the ignition key, it is possible to operate auxiliary consumers of electricity (audio system, cigarette lighter, fan heater, windshield wipers, etc.).
Position "ON" (II) - ignition on
In this position, the ignition key is permanently in motion, as well as when the engine is idling. At the same time provided electrical supply of all systems and an additional one installed on the vehicle equipment. When turning the key from the "ACC" (I) position to the "ON" (II) briefly turn on some of those located on the instrument dashboard of the car control lamps, confirming the proper functioning of the corresponding control systems.
On some models, when the key is turned to the "ON" (II) position, automatic switching on of the headlights (running lights during daylight hours).
"START" position (III) - start
Turning the key to this position engages the starter. After implementation to start the engine, the key must be released and it will automatically return to the "ON" (II).
If the car is equipped with an immobilization system, the engine start will be blocked, if the anti-theft system does not identify the key code (see above).
Single electric lock
| Each of the car doors is equipped with a release button. Single electric the lock provides the ability to simultaneously lock or unlock all door locks with a single button located on the driver's doors. The buttons of the remaining doors only disable their own locks. |
When leaving the car, you can block the lock of any passenger door from the outside.
doors. To do this, you need to drown the button to turn off the lock on the open door. and then slam the door.
| Front door locks can be locked and unlocked from outside the vehicle with a key. |
Some versions of the vehicle also provide the possibility of unlocking / locking using the front passenger door key.
Door Lock Prevention
This device is standard on some models. If a when leaving the car, leave the key in the ignition, the device will not allow lock the driver's door. When trying to drown button to turn off the door locks, buttons located on all doors vehicle immediately automatically jump to the top position.
Security door lock system
| The system may be standard on some models and serves as to improve the effectiveness of the anti-theft protection of the car and any, the items in it. To initiate the system, it is necessary twice in within 5 seconds, turn the key in the lock towards the front of the car. |
Locking of door locks on models equipped with this system is carried out even with the windows down and the sunroof open.
| Possibility of unlocking locked ones with this the door system from inside the car is also missing! |
Some versions of the car provide for the possibility of initiating increased reliability locking systems using a single lock remote control.
Single electric lock remote control
| Single electric lock system allows locking and unlocking keyless door locks. For simultaneous locking of all two rails, being near the car, press the top button of the remote control "LOCK", unlocking the doors is done by pressing the left button "UNLOCK" . |
When the door locks are unlocked with the remote control, the interior lighting (the light switch must be in the middle position). If after unlocking the locks from the remote control within 10 seconds, no operation is opening any of the doors, the interior lighting will automatically turn off. Repeated blocking of locks from the remote control before the expiration of the agreed 10 seconds, interior lighting will turn off instantly.
If none of the vehicle doors are opened within 30 seconds after unlocking them from the remote control, then all the locks will automatically re-lock.
If the key is left in the ignition or any of the doors are not closed properly tight, then control the door locks with the remote control becomes impossible.
Tailgate/lid release on some models luggage compartment using the remote control of a single lock, - press the lower right remote control and hold it down for about one second.
| If the key is in the ignition, unlocking the door with remote control is not possible. |
Security door lock system
This system may be included as standard on some models and serves to increase the effectiveness of the anti-theft protection of the car and any, the items in it.
The system can be initiated from the remote control remote control, for which you need to press the top button of the remote control twice within 5 seconds.
Door locks on models equipped with this system are even with the windows down and the sunroof open.
| Possibility of unlocking locked ones with this the door system from inside the car is also missing! |
Replacing the battery
About the low battery level of the remote control and the need to replace it the following external signs testify:
a) When pressing the remote control buttons indicator built into the key fob the LED does not light up;
b) Locking/unlocking the doors requires repeated pressing of the remote control buttons.
A "dead" battery should be replaced without delay with a new one, such as CR2025
To replace the battery, remove the round cover located on the back of the remote control.
The cover is removed by turning it counterclockwise. For this you can use small coins. Remove the old battery from the remote paying attention to the polarity of its inclusion. Load a new element into the remote control, turning it side with "+" sign up.
|
|
Install the cover in its proper place on the console, aligning the CC mark on the cover, with the n mark on the body, then turn the cover clockwise.
Handling and care of the remote control
Do not subject the remote control to strong impact, drop or drop it. Do not expose the remote control to excessively high or low temperatures, do not leave long time under direct sunlight. To clean the outside of the remote control, use soft tissue. The use of solvents or aggressive cleaning agents may cause surface erosion of the remote control.
Immersion of the remote control in water or other liquid fraught with its failure.
If the remote control is lost, contact the authorized service station Honda to purchase a replacement unit and program it under single lock system for your car. Simultaneously with acquisition and programming new remote control, it is necessary to reprogram the second remaining remote control.
Child lock
| To prevent children from accidentally opening doors while driving rear door locks are equipped with a special locking device. There is a locking lever on the end surface of each rear door. If the lever is moved to the "LOCK" position with the door open (LOCK) and then close the door, it cannot be opened with inside handle regardless of the position of the lock release button. |
Tailgate/tailgate lock
The tailgate/tailgate can be unlocked using two ways:
a) Pull the handle for remote unlocking of the tailgate/tailgate offices located next to the driver's seat;
b) Insert the ignition key into the door/lid lock and turn it clockwise.
|
|
To lock, simply slam the door/lid.
When driving, make sure that the tailgate/tailgate Branches remained permanently closed. This will help prevent possible damage, and will also prevent the penetration into the cabin containing highly toxic carbon monoxide (CO) exhaust gases.
| The trunk lid remote release handle can be locked using the ignition key, - insert the ignition key into the lock next to the handle and turn it counterclockwise. |
Glove box
| To open the lid of the glove box, press its button to the left handles, the lock snaps into place automatically when the lid is closed; The lock can be locked using the ignition key.
|
Anti-theft alarm
Anti-theft alarm helps prevent vehicle theft or theft valuables from the cabin and trunk. When attempting unauthorized entry into the car or removing the car radio, the sound signal turns on and the devices flash outdoor lighting: headlights, front and rear marker lights, as well as direction indicators. The audible alarm works for two minutes, then the security system is switched back to standby mode. On some versions vehicle, the horn will only sound for 30 seconds. To set the system to standby mode without waiting for the end of two minutes, unlock one of the car's front doors using the key or remote control of the same castle.
| The alarm goes into standby mode automatically after fifteen seconds after all doors, trunk lid and car bonnet. |
After the activation is completed and the anti-theft alarm system is turned on in standby mode opening any car door (without using a key or remote control), trunk lid or hood to trigger an alarm. An audible alarm also sounds when trying to eject car radio from its socket in the control panel or when cutting wiring.
When the alarm is on standby, it is possible to open luggage compartment lid without triggering the alarm, - for this it is necessary use the main ignition key or remote control. The alarm will only sound if the trunk lock is forced or opened with using the button located in the passenger compartment on the driver's door.
Anti-theft alarm does not go into standby mode when one of the car doors, the trunk lid or hood is not closed properly. If the alarm does not activate, look at the indicator lamp for loose closing of doors and luggage lid compartments on the vehicle dashboard (see Section Equipment vehicle, arrangement of instruments and controls ), then manually check whether whether the hood of the car is closed.
Do not attempt to modify the anti-theft alarm system or individual nodes. This can lead to a decrease in the effectiveness of security functions. systems.
Sometimes there is a problem associated with a broken key in the door lock. This is a rather unpleasant situation, but if you follow simple recommendations, you can find a way out of it on your own. In this case, it is important not to panic, so as not to harm even more. How to extract a broken key from a larva?
The following main reasons why a breakdown occurs can be distinguished:
There are the following types of locks:
1. By mounting type:
2. Type of locking mechanism:
Inside them is a crossbar with teeth and machined grooves. These locks have low burglary resistance, so their use to protect valuable items is not recommended.
How to get a broken key from a door lock? The work is carried out using the following tools:
As a rule, it is enough to use only 2-3 of these tools.
To extract a broken key, different methods are used, which are grouped in this way:
In some situations, key fragments are tried to be glued together with glue. However, this method is inefficient, since there is a possibility of the debris jamming, which further complicates the matter.
Also, chemical elements can get inside the castle, which will require replacement of the larva.
How to remove a broken key from a larva? This can be done in the following ways:
Everything must be done carefully, without the use of excessive force. If it is impossible to extract the fragment, the following basic methods are used:
If the larva cannot be removed, you must first remove the decorative trims and return them back after replacing the larva.
Breaking the door is required when other methods are ineffective, the presence of children in a locked house or heavy smoke in the room.
It is highly desirable not to bring to this, but to invite highly qualified specialists with extensive experience and specialized tools.
The main methods of breaking the door include cutting the bolts of the lock with a grinder. It is possible to cut the lock, but this can ruin the door. You can also consider cutting the hinges, but this is not always feasible due to the presence of special protection on many doors.
Periodically inspect the mechanism and lubricate the lock. Immediate repair of the secret mechanism is recommended when jamming is detected. It is advisable not to use a bent or broken key.
In the event that you are unable to solve the problem on your own, it is recommended to seek help from highly qualified professionals:
In the event that the living space is rented, it is necessary to agree with the owners so that they arrive with documents.
It is recommended that you follow some preventive measures that will help minimize the likelihood of problems with the lock:
There are no replaceable batteries for the microchip, - Do not under any circumstances attempt to disassemble key head! 
Remove the key from the lock only after complete stop of the vehicle. Position "ACC" (I) - parking 
For in order to open the rear door locked in this way, it is necessary to raise the release button of the lock and use the outside handle. 
To activate the alarm system, you must lock the door locks from outside the car: using the key, the lock button lock, single lock switch or remote control management. The process of activating the burglar alarm is accompanied by a flashing control lamp of the system built into the assembly of the fuel level / temperature meter instrument cluster engine coolant. 
