FREE DELIVERY On orders over £25
CLICK & COLLECTFrom 500+ stores
SHOP OUR SALE
TRADE ACCOUNTSave 5% every day
Back to Speciality Drill Bits & Chucks
Click here for full description
Quantity
Collection
Delivery
Login to save for later
Suitable for drilling sheet metal up to 3mm thick. 1/4" hex shank fitting in a moulded case. Sizes (1/8"-1/2"), (3/16"-1/2"), (1/4"-3/4").
Technical Specification
| Brand | Silverline |
| Manufacturer ID | 151206 |
| Type | Drill Bit |
| Pack Size | 3 |
Reviews
★★★★★ ★★★★★
HSS Titanium Coated Step Drill Set (3 Piece) is rated 4. 5 out of 5 by 49.
Rated 4 out of 5 by Joinerjon from Top job Did the job asked of it , mild steel hole enlargement
Date published: 2022-10-12
Rated 5 out of 5 by Richard 71 from Step drill set Good reasonable priced and excellent quality.
Date published: 2022-08-31
Rated 4 out of 5 by Onyxx from Good for occasional jobs Was great for fitting a safety lock on my van. Sharp and quick enough. If you are not power user, it does the job. The pouch is a good addition. Only downside, for these small sizes everyone uses metic, not imperial sizing. Calculator/vernier is your friend though. Hence the 4 star.
Date published: 2022-07-03
Rated 4 out of 5 by Kevhev from Ok for the price Ok for the price but struggled with stainless steel.
Date published: 2022-04-09
Rated 5 out of 5 by k and t construction from tools very good tool would buy from you again
Date published: 2021-12-04
Rated 1 out of 5 by KnIelectrical from Rubbish Don’t waste your money on these drill bits, doesn’t lost.
Date published: 2021-10-08
Rated 3 out of 5 by tmf21952 from set of 3 step drills Not actually used them yet
Date published: 2021-09-20
Rated 5 out of 5 by Hexy from Great item Good quality, great set! Recommended
Date published: 2021-07-28
Share
This item has not been added to your trolley. Find out more
Let us find your local store, enter your postcode
Your Address
Hey, browse our site often?
ADD TO HOME SCREENFREE DELIVERY On orders over £25
CLICK & COLLECTFrom 500+ stores
SHOP OUR SALE
TRADE ACCOUNTSave 5% every day
Back to Speciality Drill Bits & Chucks
Click here for full description
Selected
4-22mm - (78333) - Each - £13.49 14-26mm - (89314) - Each - £23.19
Quantity
Select from 1 variation
Collection
Delivery
Login to save for later
Need to make holes in tougher materials? The titanium coated step drill is sized from 4 to 22 mm and makes light work of this normally tricky task.
It's relied on by DIYers and professional builders alike, thanks to its impressive ability to speedily penetrate through steel, non-ferrous metals, wood and plastic of up to 10 mm in thickness. You can use this trusted cylindrical shank in three-jaw drill chuck rotary drills, whether you're enlarging a few existing holes or drilling vast quantities of sheet metal.
This reliable tin-coated drill bit is made from a high-grade titanium nitride, which means it's extremely hard-wearing and long-lasting. There's a precision ground cutting edge with multiple flutes, so you can produce accurate holes that are free from burring. It comes with a handy self-centring point to eliminate the need for pre-punching and save your valuable time.
• Will drill steel, non ferrous metals and hard plastics
• Self-centring point eliminates need for pre-punching
• Produces accurate holes free from burring
• Not suitable for use on the hammer action
• Sized from 4-22 mm
Technical Specification
| Manufacturer ID | CS30 |
| Length (mm) | 4-22 |
| Pack Size | 1 |
Reviews
★★★★★ ★★★★★
Titanium Coated Step Drill 4-22mm is rated 4.
5 out of 5 by 89.
Rated 5 out of 5 by Enfield from It’s a step drill This step drill does what it says - it works in steps, so it’s no good for increasing a hole diameter by smaller amounts than the steps on the drill. Works well on steel sheet.
Date published: 2022-11-22
Rated 5 out of 5 by ChrisHartley from What a great device I wish I'd bought one of these years ago! Makes drilling set hole sizes in steel a doddle.
Date published: 2022-10-18
Rated 5 out of 5 by JED11 from Great product Brilliant piece of kit. Sharp, accurate, quick & easy… can’t go wrong getting one of these.
Date published: 2022-09-23
Rated 3 out of 5 by J2D from 50/50 I brought 2 of these, one was blunt and the other did the job.
Date published: 2022-08-05
Rated 5 out of 5 by Batelmo1 from Cut well and stayed sharp I've always looked upon these as being a bit of a bodgers' tool, but had a need to widen some holes on an RSJ flange and was pleasantly surprised how well it cut and its ability stand some quite rough treatment, It stayed sharp too, so now I'm a convert.
Date published: 2022-07-28
Rated 4 out of 5 by AndrewOxford from A step up. Very nice tool and very useful. Just hope Toolstation isn't losing it with so many things disappearing from the catalogue. Even the other lot are better.
Date published: 2022-05-17
Rated 5 out of 5 by JNR from Step drill Step drill is able to cut 20mm holes in the side of a plastic patress box with ease.
Date published: 2022-04-14
Rated 4 out of 5 by JJreviewer from Perfectly acceptable Not much to say really, it drills holes adequately.
Date published: 2022-04-10
Share
Find out more
Let us find your local store, enter your postcode
Your Address
Hey, browse our site often?
ADD TO HOME SCREEN 90,000 cone r1.0x70x120xd88 -15-301
Free call
- Write to WhatsApp
Your cart is empty
Cutter radius
0.
1mm 0.2mm 0.25mm 0.5mm 0.75mm 1.0mm 1.5mm 2.0mm 3.0mm 4.0mm
Shank diameter
3.175mm 4mm 6mm 8mm 10mm 12mm
Model: 8R010L70
Manufacturer: China0067
| R | D1 | L1 | L | D | 2mm | 70mm | 120mm | 8mm |
|---|
R D1 L1 L D Q 1mm 2mm 70mm 120mm 8mm
Radius 1.0mm. Cutting 60mm. Total length 100mm. Shank diameter 8mm. Made of alloy K40UF
Cone cutter is ideal for high relief machining without roughing.
Due to its tapered shape, the cutter has high strength with a small cutter tip diameter. nine0027
The cutter is made of HRC55 tungsten carbide with ALTiN coating.
Production of cutters according to the customer's parameters is possible.
Below you can find the terms of delivery:
Store pickup:
Courier delivery in Krasnodar
Transport company to any point of the Russian Federation
Russian Post (EMS) in Russia and international shipments
More about shipping methods
The following payment methods are available today:
Taper cutter R1.0x60x120xD8 Cone cutter R1.0x30.5x75xD6
Oleg Yukhanov
+7(960) 482-88-66
Evgeny Shevchenko
+7(918) 019-00-09
1x15x50xd3.175 Free call
- Write to WhatsApp
Your cart is empty
Cutter radius
0.1mm 0.2mm 0.25mm 0.5mm 0.75mm 1.0mm 1.5mm 2.0mm 3.0mm 4.0mm
Shank diameter
3.175mm 4mm 6mm 8mm 10mm 12mm
Model: 4R010
Manufacturer: China
Tags: Taper_Two-Thread_D3175
1mm Cone cutter is ideal for high relief machining without roughing. Due to the conical shape, the cutter has high strength with a small cutter tip diameter. The cutter is made of HRC55 tungsten carbide with ALTiN coating.
It is possible to manufacture cutters according to the customer's parameters. nine0027
Below you can find the terms of delivery:
Pickup from stores:
Courier delivery in Krasnodar
Transport company to any point of the Russian Federation
nine0026 Russian Post (EMS) in Russia and international shipmentsMore about shipping methods
The following payment methods are available today:
