How to detect slow leak in tire


How To Diagnose (And Fix) A Slow Tire Leak

Your tires are where the rubber meets the road – literally – when it comes to the safety and performance of your car. That means, if your tire is leaky, you could be putting your safety at risk.

A leaky tire causes low tire pressure, which can decrease fuel economy, and put you at risk for a blowout. It also decreases the ability of your car to handle properly, making it more difficult to respond to emergency situations or drive in inclement weather.

In this article, we’ll discuss how you can diagnose and fix slow tire leaks. Don’t just ignore that low pressure sensor – check out this guide!

The Most Common Causes Of Slow Tire Leaks

There are three common issues that cause slow tire leaks. Let’s discuss each one of them now.

  • Valve stem damage – New tires typically come with new valve stems, because the old ones tend to wear out. If you have older valve stems, they may go bad over time, due to use, dislocation, and exposure to chemicals on the road, such as road salt. They may corrode and go bad.

    If your valve stem is damaged, there will be a slow and constant leak. This leak could come from either the body of the valve, or the base of the valve, where it meets the tire.

  • Puncture damage – This is probably the most common cause of slow tire leaks. When you run over a nail, screw, or a sharp piece of glass or another piece of debris, it tends to get stuck in your tire.

    Contrary to popular belief, puncture damage usually doesn’t lead to an immediate flat tire or blowout, in most cases. This is because the object usually remains lodged in the rubber, preventing air from leaking quickly.

Diagnosing A Slow Tire Leak

There are a few ways you can diagnose a slow tire leak

  • TPMS (Tire pressure monitoring sensor) – If your TPMS is lit, one of your tires is under-inflated. If you inflate them all, and the TPMS goes off after just a few days, chances are you’ve got a slow leak.
  • Manual pressure readings – You should check your tire pressure manually every week or so, even if you have a TPMS. If one of your tires seems perpetually under inflated, chances are you have a leak.
  • The “spray method” – If you want to confirm that you have a leaky tire, you can mix soap and water in a spray bottle. Shake it up, and spray it all over the tire. If you see bubbling on any surface of the tire, you’ve located the source of your leak!

How To Fix A Slow Tire Leak

If you have a slow tire leak, you’ll want to have it repaired professionally as soon as possible. In some cases, you may want to keep a tire plug or patch kit in your vehicle. These kits are easy to use, and can keep your tire inflated until you bring it to a professional tire repair shop.

To permanently fix a tire leak caused by a puncture, you will need a “plug and patch”. This method of repair involves removing the tire from the wheel, and placing a combination plug and patch on the tire.

If your leak is caused by a faulty valve, you may need to replace it or your tire. Leaks caused by a damaged mounting surface may require you to replace the entire wheel.

Get Help With Tire Repair Now At Ride Time!

If you need to repair a tire damaged by a puncture, or you think your valve or mounting surface may be damaged, we can help!

Schedule your appointment on Ride Time today, and come to our service centre now in Winnipeg, to make sure you stay safe on the roads!

Common Causes for Slow Tire Leaks & How To Fix Them

A slow tire leak is more than just a nuisance. A leak can lead to low tire pressure. Not to mention, prolonged running on an underinflated tire can lead to more extensive tire damage or even cause a dangerous blowout.

If you’re experiencing a slow leak, here are some things to look for:

A tire puncture: It is a common misconception that a puncture will cause the tire to immediately go flat. However, in many cases the object that caused the puncture remains lodged in the tire and prevents the air from leaking out quickly. As with all tire leaks, it is important not to ignore a puncture. Eventually the object will either wear down and/or work its way out of the tire. For more on this read our article How to Repair a Tire with a Safe, Permanent Fix.

Wheel damage: Another common cause for slow tire leaks is damage to the area where the tire bead meets the rim. This type of damage is typically cause by the driver hitting the curb, taking a speed bump at high speeds OR those dreaded potholes! The impact deforms the wheel’s metal surface which may cause the tire to pull away from the mounting surface of the wheel.

Valve stem damage: The third most common cause for slow tire leaks is worn out or damaged valve stems. Time, use and exposure to elements can cause your valve stems to wear out and cause leaks.

Diagnosing your tire leak:

If your vehicle is equipped with TPMS, you will know right away if you have a leak. If the sensor light on your dashboard goes off, you inflate all the tires back to proper pressure and the light goes back on a few days later – you likely have a leak. If your vehicle does not have TPMS, its important to check your tire pressure regularly.

Once you’ve identified that you have a leak, use TECH Chek to locate the source of your leak. Simply spray the product all around the tire. Where the surface of the tire begins to bubble is likely the source of your leak.

So, what do you do now?

It’s important to have your tire diagnosed by a professionally trained tire shop or mobile tire repair service as soon as possible. In the case of a puncture, you may want to use a tire repair kit to keep your tire properly inflated until you can have it serviced. The leak should then be permanently fixed using a proper tire repair consisting of a cured rubber stem and repair unit.

If the leak is caused by a damaged valve, a trained tire technician can typically replace the valve at a minimal cost. In some cases, however, the tire may need replaced.

If the leak is caused by a damaged wheel, a tire technician may be able to reseat and seal the tire using a bead sealer. However, if the damage to the wheel is significant, unfortunately that means you may need to replace the wheel itself.

To read more about the types of damage that can and cannot be repaired, click here!

How to fix a slow leak on a car tire

Slow leaks occur when a tire punctures after driving over a sharp object that is stuck in your car's tire. Common culprits include nails and screws. Air slowly leaks out at the puncture site, reducing pressure and causing your tire to lose performance.

Contents

  • 1 Step 1
  • 2 Step 2
  • 3 Step 3
  • 4 Step 4
  • 5 Step 5
  • 6 Step 6
  • 7 Step 7
  • 8 Step 8
  • 9 Step 9
  • 10 Step 10
  • 11 Tips
  • 12 Warning
  • 13 Items you will need

Step 1


Determine which tire has a slow leak. The tire may be noticeably smaller or softer to the touch due to the reduced amount of air inside. Use a pressure gauge to determine if the tire pressure is lower than the other tires, if necessary.

Step 2


Break a vehicle tire that is diagonally across from a slowly leaking tire by placing a wood block or wedge behind it. Blocking or stabilization prevents the vehicle from moving. If you have a manual transmission vehicle, apply the emergency brake for added protection.

Step 3


Try to find the object causing the slow leak. If you can see it and can reach it safely, you don't need to lift the car. If you cannot see the object, read your owner's manual and raise the vehicle.

Step 4


Inspect the wheel for foreign objects or puncture marks. If you can't see anything, spray the tire with the soapy water you made by adding liquid soap or cleaning spray to the water. You should see visible bubbling at the site of the slow leak.

Step 5


Remove the source of the leak, such as a nail or screw, with pliers or a screwdriver. If you find the puncture site but the sharp object is not removed, the object may have fallen out while driving. Continue your renovation.

Step 6


Insert a plug into the end of the insertion tool included in the repair kit. The cork is a thin rubber cylinder, and the insertion tool is similar to a screwdriver with a "T"-shaped handle.

Step 7


Grasp the T-handle and align the plug with the puncture site. Insert the plug into the puncture site by pressing down on the T-handle, leaving about half an inch of the plug protruding from the tread.

Step 8


Carefully pull the T-shaped insertion tool out of the tire. Now the fork is in place.

Step 9


Add air to your tire using an air pump such as the pump at a gas station and fill to the recommended pressure. Find the recommended pressure inside your car's door jamb, if you're not sure - look for a number followed by "psi" which means pounds per square inch. Pay special attention when adding air in extreme weather conditions, but never over- or under-inflate tires depending on temperature.

Step 10


Lower the vehicle carefully if you raised it and remove the jack.

Check the tire pressure again using a pressure gauge. If the pressure is held at the desired level, you have successfully fixed the wheel. Cut off any excess cork protruding from the tire using a razor blade.

Tip


  • Eliminate slow leaks at room temperature to ensure accurate air pressure readings. Outside temperature affects pressure per 1 psi. An inch for every 10 degrees Fahrenheit.

Warning


  • Fix slow leaks as soon as possible. Continued driving on a slowly leaking tire can cause permanent damage.

Items you will need


  • Tire pressure gauge
  • wheel block
  • tire jack
  • Tire repair kit (plug, plug inserter and rasp)
  • Soapy water in a spray bottle
  • Air pump
  • shaving knife

TOP 5 reasons why a wheel can deflate without visible damage


It happens that a tire loses pressure for no apparent reason and you can’t understand what’s wrong, because you can’t see any punctures or damage . .. What is the problem? Someone may think that supernatural forces intervened, but most likely there is a more logical explanation for the loss of pressure. Find out why seemingly intact tires can lose air pressure and what you can do to keep unexpectedly flat tires from spoiling your mood!

TOP 5 problems why a wheel without punctures and obvious damage deflates slowly:

1. Tire age

Even if the tires are not used, the rubber in the tires ages over time. Just as expired products can look fresh in packaging, old tires can look like new but lack their durability and performance. This is why many tire manufacturers recommend taking tires out of service after 6-10 years from the date of manufacture, even if they have never been used!
Over time, the rubber in tires loses its properties, small, barely noticeable cracks may appear in it. They can be difficult to detect and even more difficult to repair. Air leaks slowly through microcracks in the rubber. If you suspect that one of your tires has cracked due to aging, you should contact a specialist to check its condition.

2. Dry rot

Tire age is not the only thing that can cause micro cracks in tires. Dry rot can also damage the integrity of the rubber compound that tires are made from! But what is dry rot? Dry rot is a term that describes the fragility of a tire, which is caused by degradation of the rubber compound from which the tire is made.
Unlike wood dry rot, tire rot is not caused by fungi or bacteria. Dry rot of a tire occurs as a result of exposure to external conditions that adversely affect the composition of the rubber compound of the tire. As a result, the tire dries out, which is the cause of cracks and flaking.

Several things that can cause dry rot in tires, including:

Extreme temperatures
Exposure to harsh chemicals
Excessive UV damage from direct sunlight0141
Long periods of non-use of tires or long periods of car parking.

Proper tire care and regular inspection will help prevent dry rot. If you plan to leave the car parked for a long period of time, check the tire pressure at least once a month and inflate them if necessary. Make sure tires are out of direct sunlight.
When storing tires for a long time, use special covers. We previously talked about how to properly store tires here.
If you notice signs of dry rot on a tire, usually small spider web-like cracks located on the sidewall of the tire, contact your tire shop for advice on what to do next.

3. Wheel valve malfunction

You changed a tire and after only a few kilometers it started to bleed air, with no punctures on the tire tread and no damage to the sidewalls - anyone would think that this is some kind of curse! But not the one who knows that the problem may also lie in a faulty valve.
The valve is a wheel element that allows you to adjust the air pressure in the tire. The valve consists of several parts, including the body, spool and cap. The spool allows air in and out, and the cap keeps debris out of the valve.
Wheel valve rubber housings can crack due to age, moisture, temperatures, road salt and even UV rays! The spool can also wear out and become unusable. A valve that is damaged in any way may leak air.
Wheel valve problems can be avoided by replacing them every time the tires are changed in season!

4. Air leak on the tire bead

The tire bead is a structural part of the tire, which is a hard rubber edge, thanks to which the tire is securely fastened to the rim. The tire beads are made of special rubber compounds reinforced with metal. This structural element of the tire must ensure a tight and hermetic fit of the tire to the rim.
Air leaks around the board can occur due to incorrect tire installation. Damaged, bent or corroded discs can also cause the tire to loosen to the disc and leak air. In addition, loss of rim pressure can occur after hitting pits at speed, hitting a curb, and other abnormal situations when the wheel is impacted.

5. TPMS malfunction

It is possible that the tire pressure monitoring system (TPMS) is the reason why you think that your tires are losing pressure, when in reality the pressure is normal.


Learn more