Christ Posted on Posted in Tips 2 Comments Tagged with Chevy Cobalt tpms, Chevy tire pressure reset, Cobalt Tire light reset, how to reset tpms light on cobalt
Last Updated on February 17, 2020 by Christ
2010 Chevy Cobalt TPMS Tire Pressure Monitoring System Reset – Chevrolet Cobalt is a compact car created by Chevrolet in 2004 based on Opel Astra. It is produced up to 2010 both in the sedan and in the coupe and replaces the Cavalier and Prizm’s in the US car catalog. It was only marketed on the North American market and was replaced with the Cruze, a model intended for various markets, including the European one.
The SS Supercharged was the high-performance version of Cobalt. The steel body was upgraded with a new rear spoiler and a new front air intake while the interior was made more sporty with the introduction of new pedals and other accessories. Like a propeller, the car used an Ecotec 2.0 SC from 205 hp with 272 Nm torque. It was operated by a five-speed FGP manual gearbox, while the braking system was comprised of four disc brakes combined with an ABS system.
Time needed: 17 minutes.
If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. To relearn or reset the Tire Pressure Monitoring System (TPMS) sensor on your 2008 2009 2010 Chevrolet Cobalt, follow these steps:
Press the INFO and Set/Reset buttons at the same time
Scroll up and select “Tire Pressure Menu”
Press the SET/CLR button
The horn sounds twice to signal the receiver is in relearn mode
For more details, please watch the following video:
This procedure should be work on the latest generation of Chevy Cobalt (2008 2009 2010 model years). Hopefully, the article of 2010 Chevy Cobalt TPMS Tire Pressure Monitoring System Reset useful for you.
The Chevrolet Cobalt is a compact car initially introduced by Chevrolet in 2004 for the 2005 model year. The Cobalt replaced both the Cavalier and the Toyota-based Geo Prizm/Chevrolet Prizm as Chevrolet’s compact car.
The Cobalt was available as both a coupe and sedan, and was based on the GM Delta platform also shared with the Chevrolet HHR and the Saturn ION. Also available was a high performance, Chevrolet Cobalt SS.
A Pontiac version was sold in the United States and Mexico under the G5 name for 2007–2009. It was sold as the Pontiac G4 in Mexico for 2005–2006 and as the Pontiac G5 in Canada for its entire run (where it was briefly known as the Pontiac Pursuit and later Pontiac G5 Pursuit). In all cases, the G5 replaced the Cavalier-related Pontiac Sunfire. While the Cobalt was available as a 2-door coupe and a 4-door sedan in all markets it was offered in, the G5 was only available as a coupé in the United States while a sedan version was sold alongside the coupé in Canada and Mexico.
As with their predecessors, all Cobalts and its Pontiac equivalents were manufactured at GM’s plant in Ramos Arizpe, Mexico and Lordstown, Ohio. The United States Environmental Protection Agency classified the Cobalt as a subcompact car.
The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.Tags: Chevrolet TPMS Reset
You are the proud owner of a recent car, the joy of tactile devices, the integrated technologies should bring you considerable comfort in using your Chevrolet Cobalt, however, which states that the technologies are talking about electricity, and as we all unfortunately often know, there are problems to solve. Today we will look at the tire pressure sensor and exactly how to reset the tire pressure sensor on a Chevrolet Cobalt so that this indicator never appears on the dashboard again. nine0004 To do this, we will divide our content into two parts: first, we will explain the traditional case when the tire pressure indicator appears and the method to follow, and then the case when the tire pressure indicator remains on despite the tires being inflated.
so how to reset this tire sensor on chevrolet cobalt.
First, we will look at the usual procedure for resetting a tire sensor on a Chevrolet Cobalt, which, if it lights up, here are the main steps:
Now that you have tried the common method of removing the tire pressure sensor on the Chevrolet Cobalt, and it didn't work, we'll move on to the second option, which is that the tires on my Chevrolet Cobalt are well inflated and I still want that light to go out. This almost certainly shows that you have Faulty tire pressure sensor. This will require to reset the value on your car's dashboard. However, be careful not to do this while driving as pressure fluctuations will interfere with the pressure sensors.
Generally speaking, you need to look at the parameters of the car, then you should look for an option to diagnose inflation or "deflate detection". While on this tab, you must hold the select button or reset button according to the year of your Chevrolet. Cobalt until a message appears from the car console confirming that the reset has been taken into account (usually it takes a few seconds). You can now turn off the ignition and restart your Chevrolet Cobalt to see if the tire pressure light has gone out. nine0005
You now have all the keys to know how to reset the Chevrolet Cobalt tire pressure sensor. nine0005 To learn more about the Chevrolet Cobalt, take a look at the Chevrolet Cobalt category.
Save article:
The article says:
When the tires are optimally inflated, the low tire pressure indicator (TPMS) does not light up on the vehicle's dashboard. However, in some cases, it lights up even if the pressure is normal. This can't help but be annoying, especially when the tires are inflated normally. In our article today, we will figure out how to reset a tire pressure error.
American and European scientists conducted a study, during which it was found that most drivers do not check whether the wheels are properly inflated before getting behind the wheel of a car.
Only 40% of car owners perform such a check - and even then only once every 12 months. This is the reason for a large number of accidents. nine0005
The TPMS (Tyre pressure monitoring system) system is designed to monitor tire pressure, as well as warn of a malfunction. If the tires are under-inflated or over-inflated, an error will be displayed on the remote control or an audible signal will appear.
What is dangerous too high or, conversely, low pressure? The risk of an accident increases, the car begins to consume more fuel, in addition, the rubber wears out faster.
Photo: Shutterstock nine0005
The above devices operate on the same principle. Let's figure out how information about what tire pressure gets to the control panel.
Consider how pressure is calculated by measuring instruments. Typically, the sensor performs a comparison of the angular rotation of the wheel. Knowing the value of this parameter, you can calculate the distance that the wheel will travel in one rotation.
Obviously, if the tires are under-inflated or over-inflated, then the outer diameter of the wheel will be different.
Visually, a person cannot determine this change. But the sensor notices even such changes. The system fixes non-compliance with the required parameters. nine0005
The sensor will still respond, despite the fact that the wheel circumference has changed quite a bit. In this situation, it is necessary to find out what mechanical reason led to this. Only in this way can you eliminate the misinterpretation of the signals transmitted by the system. This can happen because:
nine0016 Also, the TPMS system gives an error when you install new wheels or rearrange them.
When, after these steps, a tire pressure error appeared, indicating unbalance, you should reset the settings, and then set the basic parameters. In this case, the control signal may remain even if the basic settings have been selected.
Why such problems may occur:
nine0002 See also
"Velcro or spikes: which rubber is better for the Russian winter"
Read more
How to reset tire pressure error? To begin with, imagine that the TPMS system is working properly and the blinking light indicates a problem with the undercarriage of the machine.
The first thing you should do is slowly release the gas. You can not brake sharply, turn the steering wheel. After the car has stopped, inspect the tires to make sure the rubber is not punctured or broken. Then you can check if the tire pressure is normal. nine0005
Pay attention! The TPMS will not always show a tire pressure error. For example, if the tires are slowly deflating, the system will not inform you about the problem. In the same way, she will not notice the error if the tire pressure starts to drop rapidly. This usually happens when a tire ruptures. This feature of the TPMS system is explained by the specifics of identifying and counting nonconformities.
However, in some cases, it happens that the TPMS system indicator is on, but the tires are in perfect condition. How to reset tire pressure error? We understand. nine0005
The complex TPMS system in some cases starts to work incorrectly.
Usually, car owners observe the following picture: a tire pressure error is displayed on the display (the tire is underinflated), but in reality everything is fine with the wheel. You have to reset the tire pressure error. Otherwise, the TPMS system starts to work incorrectly.
Photo: Shutterstock nine0005
You also have to reset the tire pressure error when there is radio interference from high voltage power lines. Or when sources of radio signals are located in the immediate vicinity. But as soon as you move away from them, the pressure error disappears and the system begins to function properly.
The reason for the malfunction may lie in the sensor, which is "failed". This damage cannot be easily repaired. How to reset a tire pressure error if the sensor flashes, while you hear a beep, lose your vigilance and find it difficult to drive a car? There are 4 ways to fix this problem. nine0005
To reset the error, pick up a speed of 80 km / h and continue driving for another 15 kilometers.
This method is the easiest to implement. If your car has this feature, then turn on the cruise control so that the speed does not change. Depending on the model of your car, you will be able to reset the tire pressure error at a speed that exceeds the specified one. After you cover a distance of 15-20 kilometers, maintaining the same speed of 80 km / h, make a stop. Turn off the motor. When you start it again, the tire pressure error will disappear. nine0005
Popular articles
How to choose a subwoofer for your car
19.12.2022
19
From top to bottom, obliquely: how to degrease a car body before painting
12/15/2022
44 nine0005
Chic, shine, beauty: how to remove scratches on a car with your own hands
9.
12.2022
105
Without damage: how to reduce the fuel consumption of your car
11/29/2022
146
nine0054 How much do they pay for advertising on a car11/25/2022
316
Press the tire pressure monitoring system (TPMS) reset button on your car and you should be able to reset the error.
It does not matter what type of low pressure warning system is used. In any case, there will be a sensor on each wheel of your car. Sometimes it may be necessary to reboot the touch system of the car. Read the owner's manual for the vehicle.
It contains information on how to reset a tire pressure error. Most often, the instructions indicate which button to press to reset. nine0005
The ignition key must be in the lock. No need to start the car, just turn it to the “on” (“ON”) position. Then press and hold the reset button, which may be under the steering wheel. We are waiting for the low pressure indicator to blink 3 times. After that, you can release the button. We start the car, it should work for 20 minutes. After this time, the computer will calibrate the sensors on the wheels. Now you can turn off the car.
nine0002 See also
""
Read more
Lower and then re-inflate the wheels.
Failed to reset tire pressure error using the previous method? Then we inflate all tires to 0.2 bar, this is the pressure that should be according to the recommendations of car manufacturers.
Did the error go away? Then we lower the pressure in the tires completely.
Now we pump up the wheels again. The pressure in them should be the same as indicated on the driver's door pillar or in the car's operating instructions. When there are sensors on the wheels, you need to remember about the spare tire. Now you need to drive about 3-5 kilometers, adhering to a speed of 25 km per hour. So you can reset the tire pressure error. nine0005
Remove the battery terminals and then connect it to reset the error.
Each car has a computer that receives data from all kinds of vehicle sensors, including TPMS system sensors. However, any electronics can fail. To reset the error, you will have to reboot the system, for which you need to turn off the power.
Photo: Shutterstock
To do this, open the hood. The battery is located under the hood. Disconnect the negative terminal from it. To perform this operation, use a wrench. Then sit in the driver's seat, turn the key to the "ON" position, but do not start the car.
Now you need to press the signal for 3 seconds. This will use up the energy that remains in the electrical system of the machine. Then reconnect the battery. This way you can reset the error. nine0005
Sensors keep track of tire pressure. However, you need to be sure that they function properly. Of course, you do not need to constantly walk around with a special measuring device and find out the status of the sensors. It just needs to be calibrated from time to time.
It is performed quite simply. The most important thing to remember is that, depending on the make and model of your car, for each wheel there are pressure parameters strictly defined by the manufacturer for winter and summer. These values should be given to the sensors. How the installation and configuration will be performed depends on the controller used. nine0005
Nothing else needs to be configured. 
For current promotions on the Halva card, which will help you profitably purchase household appliances, you can follow here. nine0005
To prevent a tire pressure error from appearing, it is important to calibrate (adjust the TPMS system) every time a change is made. For example, when you installed a new set of wheels, repaired tires, did balancing, and the like. Using TPMS controllers is quite simple. The main thing is to read the instructions for use of the device. And make sure that the tire pressure is the one recommended by the car manufacturer.
nine0002 See also
"What tires can be put on rims 14, 15 and 16: advice from professionals"
Read more
Every car owner gets annoyed if the tire pressure error icon lights up on the dashboard. This indicator informs you that something is wrong with the wheels.
