How to reset tire pressure sensor vw passat


How Do I Reset the Tire Pressure Light in a Volkswagen?

The processes are simple, but knowing which is the right one for your year and VW model is key.

By James Tate Jan 31, 2023

Volkswagen

 Article QuickTakes:

Your vehicle’s Tire Pressure Monitoring System (TPMS) is a valuable tool, keeping an eye on the amount of air in your tires and flashing a tire pressure lighting warning when the pressure is too high or, most often, too low.

A common misconception is that a quick tire fill-up should be enough to make the TPMS warning light go away. Most of the time you’ll have to reset the TPMS to bring your instrument display back to normal. For Volkswagen drivers, this can be done in several ways depending on the model you drive, and the year it was built.

There are various methods to reset your VW’s TPMS.

Using the TPMS Reset Button

Most 2009 to 2013 Golf/GTI, Jetta, Passat, Phaeton, Tiguan, and Touareg VW models have an easily accessible TPMS reset button inside the glove box (if you don’t find it there, consult your owner’s manual for the location).

After inflating all four tires to the recommended tire pressure, press and hold the TPMS reset for at least two seconds; you should hear an audible chime, and the TPMS warning light should shut off.

A second method for resetting the TPMS includes applying the parking brake after inflating all tires. Then, wait 20 minutes, release the parking brake, and drive the vehicle at about 16 mph.

Resetting through the Instrument Cluster

If your VW is from the early 2000s through to the 2016 model years, and you don’t have a TPMS reset in the glove box, there’s a good chance it’s accessed through the instrument cluster.

Turn the ignition on, but don’t start the engine. Then, press the “Menu” button on the instrument cluster and use the thumb knob to select “Tire Pressure,” then select “Store.” Some versions of this method recommend driving the car for about 20 minutes at or above 30 mph; others don’t. Once again, check your VW’s owner’s manual to see if this method applies to your vehicle.

Resetting the TPMS via the Infotainment System

If your VW is a 2019 model year or later, you’ll likely be able to use your infotainment system’s touchscreen in the center stack to reset the TPMS.

Again, turn the ignition on without starting the engine. Press the button that says “Car” on the touchscreen, then click on either “Setup” or “Settings.” From there, select “Tires” then “Set.” The system will flash a quick confirmation. Hitting “Confirm” should reset the TPMS.

If none of these methods work, double-check that your tires are inflated to their proper pressure. If they are, consult your preferred VW dealer or mechanic, as there may be an issue with the system itself. It’s strongly advised not to put it off, either. Tire pressure is vital to your car’s performance in terms of efficiency and safety. With the colder winter temperatures causing tire pressures to drop regularly, you will want a functional TPMS for the upcoming winter driving season.

TAGSvolkswagen tiguanvolkswagen touaregvolkswagen passatvolkswagen jettavolkswagen golfvolkswagen gtivolkswagen phaeton

This site is for educational purposes only. The third parties listed are not affiliated with Capital One and are solely responsible for their opinions, products and services. Capital One does not provide, endorse or guarantee any third-party product, service, information or recommendation listed above. The information presented in this article is believed to be accurate at the time of publication, but is subject to change. The images shown are for illustration purposes only and may not be an exact representation of the product. The material provided on this site is not intended to provide legal, investment, or financial advice or to indicate the availability or suitability of any Capital One product or service to your unique circumstances. For specific advice about your unique circumstances, you may wish to consult a qualified professional.

James Tate

James Tate has been writing about cars professionally for 15 years and he remains obsessed with them. He enjoys digging into the incredible technology of new vehicles as much as he likes the tactility and the driving experience of yesterday’s cars. He has written for a variety of legacy automotive magazines and websites.

How to reset the tire pressure sensor in VW models

Resetting the TPMS in your 2016 Volkswagen

By Product Expert | Posted in Tips and Tricks on Wednesday, June 22nd, 2016 at 7:03 pm

How to reset the tire pressure sensor in VW models

We love modern technology and safety features. Warning sounds let us know when we’re straying from our lanes, and even when we just leave the lights on or don’t close the door all the way. It’s these small things that prevent our batteries from dying and keep us safe. At the same time, it can be annoying when you see a warning light and you know you’ve fixed the problem. So if your TPMS system is acting a bit wacky, you may be wondering how to reset the tire pressure sensor in VW models so that you can be sure yours will still give you a correct reading next time your tires are a bit low.

The VW Tire Pressure Monitoring System doesn’t turn off automatically

This should be your first question, whether the system is meant to turn off on its own, and it isn’t. We are assuming you’ve already filled your tires before seeking answers on how to turn off the warning light, but if you haven’t you should know that the proper PSI for your tires should either be listed on your gas tank lid or the inner door jamb of your vehicle.

More FAQs: Why is my VW check engine light on?

Did you know a tire underinflated by just 8 PSI can reduce fuel economy by up to 4%? Well it only goes down from there, and the uneven pressure will almost definitely wear your tires thin earlier than necessary. So be sure to actually fill your tires before resetting the system.

How to reset the Volkswagen tire pressure indicator

Resetting the system is quick and easy one you know how to do it. Once properly inflated, you’re either going to find a small button right in the glovebox if you have a model from the pre-infotainment days, or you’ll turn it off through your touchscreen system. If pressing a button simply make sure to hold it until you hear a beep.

In the infotainment system, the TPMS can be reset by finding the tires section within the setup menu. Hit set, then confirm that your tires comply with the required PSI values.

Read More: Changing the time in your Volkswagen instrument cluster

If you’ve gone through this whole process and your system still won’t reset, double check that your tires are set to the right pressure. Otherwise you may have to stop by our dealership to make sure the system itself isn’t faulty. We hope this post was helpful, and you’ll come back here to the Napleton Volkswagen Springfield Blog to read more posts like this one.

This entry was posted on Wednesday, June 22nd, 2016 at 7:03 pm and is filed under Tips and Tricks. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Reset tire pressure warning lamp Volkswagen Passat

DIY

Frequently asked questions about cars and motorcycles
  1. by car
  2. :
  3. Volkswagen
  4. :
  5. Passat
  6. : Reset tire pressure warning lamp Volkswagen Passat

Volkswagen Passat - Video Lesson

Model: Volkswagen Passat B7 - Years 2010-2014
Part: inspection and maintenance
operation: Volkswagen Passat tire pressure warning light reset

In this video tutorial we will see how to reset the Tire Pressure Warning (TPMS) Volkswagen Passat Series 4; any problem related to a change in pressure in one or more tires, due to which the warning light comes on, must be solved before performing the operation. Then we get into the car and turn on the ignition of the car; opening the glove box we will find a small button that we will press (the "set" button) and keep it pressed for about three seconds. We will then see our tire pressure warning light disappear from the dashboard!

Published on 22 December 2021 by ScegliAuto


Why does the Check Engine light come on?

With this video tutorial we can understand why the engine warning light comes on. When the yellow light comes on, it indicates a less serious problem, however, when the red light comes on, it indicates a more serious problem, so the car should be stopped as soon as possible to avoid damage. The check engine light comes on when one of the sensors associated with, for example, the anti-pollution system detects a malfunction (eg too low or too high pressure in the turbine, clogged particulate filter, etc.). ). If you turn off the car engine and start it again and the light stays on, the problem may be in the electronic system. If the light does not go out, the best thing you can do is to see a mechanic for a diagnosis as soon as possible.

Watch the video!

by ScegliAuto


more videos


Posted on 14 November 2022 by ScegliAuto
  • How to reset the Dacia Duster AdBlue indicator?
    Posted on 30 October 2022 by ScegliAuto
  • battery replacement in remote control Peugeot 3008
    Posted on 30 October 2022 by ScegliAuto
  • How to remove steering wheel on audi a3
    Posted on 28 October 2022 by ScegliAuto
  • How to disassemble the power window motor Peugeot 106
    Posted on 28 October 2022 by ScegliAuto
  • How to change the oil in a Fiat Panda 9 engine0014 Posted on 27 October 2022 by ScegliAuto
  • How to disassemble the Mercedes C-class remote key
    Posted on 26 October 2022 by ScegliAuto
  • How to disassemble mirror Golf 7
    Posted on 25 October 2022 by ScegliAuto
  • How we disassemble the instrument cluster Volkswagen Golf 4
    Posted on 24 October 2022 by Scegli Auto
  • How to disassemble the cabin filter Citroen C3
    Posted on 23 October 2022 by ScegliAuto
  • How to reset the tire pressure sensor in a Volkswagen Passat?

    You are an enthusiastic owner of a recent car, the enjoyment of tactile devices, the integrated technologies should bring you a significant usability of your Volkswagen Passat, however, which is to say that the technology speaks of electricity, and, as we all, unfortunately, know in some cases there are problems to fix. Today we will focus on the tire pressure sensor and specifically on the tire pressure sensor. how to reset the Volkswagen Passat tire pressure sensor so that this indicator never appears on the dashboard again. To do this, we will divide our article into two parts: first we will discuss the classic case of a tire pressure indicator light and the procedure to follow, and then the case where the tire pressure indicator remains on despite the tires being inflated. so how to reset this tire sensor on volkswagen passat.

    How to reset the tire pressure sensor on a Volkswagen Passat? Looking at the pressure in your tires

    First we will focus on the general procedure for resetting a tire sensor on a Volkswagen Passat, which if it lights up, here are the basic simple steps:

    • Volkswagen Passat tire pressure indicators turn on, get out of the road pretty quickly if you are driving on the highway, just in case, hold the steering wheel firmly.
    • Once stopped, visually check the condition of your tires , if one of them is completely flat, change the wheel, if it is not inflated enough, go carefully to the gas station.
    • Check the tire pressure of your Volkswagen Passat using a pressure gauge and follow the manufacturer's recommendations. on a sticker in the driver's door.
    • If you find during this re-inflation that the tire is damaged, it is replaced0039 A logical trick is how to reset the tire pressure sensor on a Volkswagen Passat. The indicator light should have gone out or gone out after a few seconds. . If it turns out that this is not the case, we advise you to review the following sections.

    How to reset the Volkswagen Passat tire pressure sensor that is always on when the tire pressure is high worked, we'll move on to the second alternative, namely, the tires on my Volkswagen Passat are well inflated, and I still want this light to go out.

    Most likely, this means that you have Faulty tire pressure sensor. This will require to reset the value on your car's dashboard. However, be careful not to do this while driving as pressure fluctuations will interfere with your sensors. In general, you need to go through the car configurations, then you should find an option for inflation detection or "deflation detection". While on this tab, you must hold the select button or reset button according to the year of your Volkswagen. Passat until a message appears on the car console confirming that the reset is taken into account (usually takes a few seconds). You can now turn off the ignition and restart your Volkswagen Passat to see if the tire pressure light has gone out.

    Additional solution to reset the tire pressure sensor on your Volkswagen Passat: replace the faulty tire pressure sensor In total, it is

    tire pressure sensor on the valve that is defective or faulty on your Volkswagen Passat .

    Learn more