A: Click here to contact D&L Sales Dept. for assistance.
Q: Does D&L make downhole tools that are similar to other tools that are available? Where can I get a cross reference guide?
A: Click here for a cross reference guide of available downhole tools made by other manufacturers.
Q: Where can I locate D&L part numbers and/or a parts list?
A: For a product tool part number – click here to go to the Products page, and click on a link (tool name) to see the Sales Data Sheet. For individual replacement component part numbers – please refer to the technical manual for the specific tool (NOTE: For access, current customers will need to login). Or click here to contact D&L Engineering Dept.for assistance.
Q: How can I setup an account and become one of D&L’s customers?
A: Click here to contact D&L Sales Dept. for assistance.
Q: Why do I need a login User Name and Password for D&L’s website?
A: To access technical information and documents.
Q: How can I get a member login to D&L’s website?
A: Current customers can click here to login – OR – click on the Create an Account (top right of any page). Fill out the form with your information, then click on Sign Up to submit your information for review.
Q: Can D&L make premium / special threads?
A: Yes – we have access to many types of premium threads. Please contact a D&L Sales Associate with questions about your specific requirements.
Q: Where can I locate technical information for D&L products? and for a specific size?
A: Login with your member User Name and Password. When the Products page opens, click on the tool size link under Technical Data that you need. If technical information is not listed, click here to contact D&L Engineering Dept.
for assistance.
A: No – D&L is a manufacturer only. We will offer technical assistance to any of our customers regarding their tools. Click here to contact D&L Engineering Dept. for specific needs.
Q: Does D&L offer any tools other than what is listed in the catalog?
A: Yes – D&L is always willing to work with our customers on any custom projects they may have a need for.
Q: Does D&L offer other exotic materials, elastomers, and/or metallics for corrosive downhole environments?
A: Yes – Some of the more common materials we use are 13 Chrome and Super 13 Chrome, but we have worked with other types in the past. Some common elastomers we use to upgrade our tools with are: HSN, Viton, EPDM, ECNER HSN, ECNER Aflas, ATR, and VTR seal arrangements. We also offer electroless nickel plating on most of our product line.
This offers protection against corrosive downhole environments at a much lower cost than exotic materials.
Q: What if I cannot locate the tool(s) for my application in your catalog?
A: Click here to contact D&L Engineering Dept. for assistance – more than likely we have something in our product line that can be used in your application.
Q: What is the shear value of the shear screws on a tool?
A: Click here for shear screw values. (NOTE: Shear values do NOT apply if shear screws are used in a pressure-operated tool.)
Includes Risk Score, Credit Limit, CCJs, Mortgages & Charges, Director & Secretary Timeline, Shareholders, Ownership & Group Stucture. Plus UNLIMITED updates and FREE documents!
Find Out More
Company Name
PRECISION OILTOOLS (ABERDEEN) LIMITED
Company Type
Private limited with Share Capital
Company Status
Non trading
Incorporated On
29 February 2016
Nature of business (SIC)
32990 Other manufacturing n.
e.c. - The company was dormant during y/e 29.02.21.
Accounts
Available to 29 Feb 2020. Next accounts due by 29 Nov 2021
| Name | Role | Date Of Birth | Appointed | Resigned |
|---|---|---|---|---|
| MR ERIC GEORGE STEELE | Director | - | ||
| MRS BEVERLEY ROBERTSON | Company Secretary | - | ||
| MR GRANT DONALD INNES | Director | - | ||
| MR CRAIG ALEXANDER ROBERTSON | Director | - | ||
| MRS BEVERLEY ROBERTSON | Director | - | ||
| Mr Peter Barnes Moyes | Director | |||
| Mr Ronald Alexander Hepburn | Director |
No mortgages or charges have been registered against this company.
| Accounts | |||||
|---|---|---|---|---|---|
| Cash | £0.00 | £0.00 | £0.00 | £0.00 | £0.00 |
| Net Worth | £6,667.00 | £6,670.00 | £0.00 | £6,670.00 | £6,670.00 |
| Total Current Liabilities | £0.00 | £0. 00 | £0.00 | £0.00 | £0.00 |
| Total Current Assets | £0.00 | £0.00 | £0.00 | £0.00 | £0.00 |
View Full Accounts
In modern production, the processing of various parts is carried out using special machines, namely on modern high-precision CNC machines. In the process of processing a part with the use of oil and various coolants, oil mist and steam are released. Over time, the oil settles on the electronics of the machine, and the concentration of harmful substances in the air exceeds all permissible thresholds.
Harmful vapors, getting into the lungs of workers, poison the body. The negative impact often manifests itself in the form of an exacerbation of chronic diseases and allergies of various types. Air purification is the main method of dealing with oil fumes.
The workplace requires daily ventilation. But such an ordinary cleaning method does not completely eliminate harmful fumes. Currently, special filters are used to preserve the health of workers and increase the life of machines. A high-quality and properly selected filter will provide optimal conditions for air parameters in the workplace and reduce the concentration of harmful substances.
One of these new generation filters is Atmosphere - M . The filter is designed to remove oil mist from the working area of the machine. It improves visibility, reduces machine downtime, because the operator must wait until the fog clears to change the workpiece. Atmosphere - M ideal for air purification in domestic enterprises.
When developing the filter, all possible production parameters were taken into account.
Main advantages of filter Atmosphere - M :
Atmosphere - M includes filters of different levels. They do not need frequent cleaning and replacement. Typically, filters are changed once a year. Clean the filters as they become dirty, which depends on the coolant and the operation of the machine.
In order to clean the filters, they are removed from the main unit. Further, with the help of ordinary water or coolant, they are washed and blown with air.
Advantages of Atmosphere - M lies in the possibility of using it as a separate system, and in the integration of existing systems.
The filter can be installed by the customer himself.
Filter connection is easy.
Atmosphere - M connected:
Filter Atmosphere - M is equipped with an exhaust fan. The exhaust fan is specially designed to remove mist and smoke from the workshop. It is quite rigid, which ensures low vibration levels, while it perfectly ventilates the workspace. The system helps to preserve the health of your employees by reducing the amount of inhaled coolant vapors and meets all environmental safety standards, which is important.
Domestic filter Atmosphere - M , in comparison with foreign devices, is one of the most effective and high-quality cleaners.
When using Atmosphere - M :
Filter Atmosphere - M will easily ensure high-quality production and safe air parameters in the working environment
31 of Civil Aviation Services of metalworking and manufacturing of parts according to customer drawings on the equipment of our plant
go to
Most likely JavaScript is disabled in your browser.
You must enable JavaScript in your browser to use the full functionality of this site.
Mounting, dismounting, operation of bearings requires the use of various tools, equipment and materials. We offer a full range of products required for bearing maintenance. This page contains a list of the main groups of products and materials - from modern diagnostic tools to universal and special lubricants from various manufacturers.
FAG mounting tool kits are designed for economical and safe mounting of rolling bearings with a bore diameter of up to 50 mm.
It is also possible to easily mount bushings, distance rings, seals and other similar parts.
The outer races of the bearing are mounted in the bore of the housing, and the inner races, designed for a tight fit, are similarly driven onto the shaft by means of a hammer and a special mounting sleeve (mandrel). This avoids the transfer of assembly force through the bodies and raceways, which can lead to their damage. Coordinated FAG precision parts guarantee an even distribution of forces on the flanks of the bearing rings.
FAG LOCKNUT-SOCKET socket wrenches are used for easy installation and removal of spline nuts on a shaft, adapter sleeve or withdrawal sleeve. They require much less space on the nut circumference than hook wrenches and allow the use of wrenches and torque wrenches.
For greater reliability and safety of work, socket wrenches should be fixed with locking pins and rubber rings.
Therefore, FAG socket wrenches have a hole for a locking pin and a groove for a rubber ring. Locking pin and rubber ring included.
FAG LOCKNUT-HOOK wrenches are used for tightening and loosening spline nuts on shafts, adapter sleeves and withdrawal sleeves. FAG hook wrenches can be used to mount a small bearing on a tapered shaft, adapter sleeve or withdrawal sleeve.
The withdrawal sleeves can also be removed using FAG hook wrenches and special forcing nuts.
FAG LOCKNUT-FLEXIHOOK swivel hook wrenches are designed for tightening and loosening spline nuts (precision nuts) on shafts, adapter sleeves and withdrawal sleeves when there is no predetermined tightening torque.
The use of the LOCKNUT-FLEXIHOOK series wrenches allows mounting or dismounting of slotted nuts of various sizes.
FAG spigot wrenches of the LOCKNUT-FLEXIPIN series are designed for tightening and loosening spline nuts (precision nuts) on shafts, adapter sleeves and withdrawal sleeves when there is no predetermined tightening torque.
With these swivel keys, it is also possible to mount small bearings on a tapered shaft journal.
FAG socket wrenches of the LOCKNUT-FACEPIN series are designed for tightening and loosening shaft nuts (precision nuts) on shafts, adapter sleeves and withdrawal sleeves when there is no predetermined tightening torque.
With these swivel keys, it is also possible to mount small bearings on a tapered shaft journal. Tightening is done in the axial direction.
FAG Double Hook Wrenches are used to mount double row spherical ball bearings with a tapered bore.
Keys are supplied as a set or separately.
The FAG LOCKNUT-DOUBLEHOOK-KIT is a case with a double hook wrench, torque wrench and instruction manual. The use of a torque wrench in the installation allows you to accurately determine the initial position, based on the specified torque value.
Mechanical pullers are used to remove small bearings, with a bore diameter of up to 100 mm, mounted with an interference fit on a shaft or in a housing. Accurate dismantling is feasible provided that the puller grabs the bearing ring that is installed with a tight fit.
The dynamic force of the mechanical puller is realized mainly through the use of a screw. In addition to mechanical 2-, 3-, 4-jaw pullers and hydraulic elements, FAG also offers specially designed pullers.
FAG's PowerPull SPIDER series hydraulic pullers are used when pulling bearings when a lot of force is required.
Pullers of ten different sizes, designed for an applied force from 40 kN to 400 kN, cover a wide range of applications and allow quick and easy dismantling of rolling bearings, gears, bushings and various press-fitted parts. Added to this is the low weight of the pullers, which can be used in any position.
Additional long arms (accessories) allow bearings to be retrieved from greater depths.
FAG hydraulic nuts are used to mount parts with a tapered bore on a tapered shaft journal. The presses are primarily used when the clamping force of means such as shaft nuts and stop bolts is insufficient.
Rolling bearings or small parts (up to 5 kg) can be heated (up to 120 °C) on the FAG HEATER-PLATE with temperature control.
Removable cover provides uniform and fast heating of the part, and also protects it from contamination.
The hot plate HEATER-PLATE-370C is intended primarily for heating aluminum FAG HEATING-RINGs and bearings. The heating temperature of the rings reaches 200–300 ˚С. In this case, the outer diameter of the part should not exceed 350 mm, and the weight should not exceed 20 kg.
Many rolling bearings and other symmetrical steel parts have a tight fit on the shaft.
Heat bearing assemblies, cylindrical roller or needle bearing rings, and steel parts symmetrical about the axis of rotation, such as labyrinth rings, couplings, bands, etc.
Heating rings are used when dismantling inner rings with or without a rigid rib, needle and cylindrical roller bearings. The use of heating rings is cost-effective in cases of non-serial dismantling of bearing rings of small and medium sizes (hole diameter - from 50 to 200 mm).
Heating lasts, depending on the size of the ring, from 5 to 30 seconds.
Heating rings are made of light alloys, equipped with radial cuts, and for comfortable operation - heat-insulated handles.
FAG electric induction devices are designed for dismantling the inner rings of needle and cylindrical roller bearings of medium and large sizes (with a bore diameter over 90 mm).
In addition, they can be used for heating labyrinth rings, couplings and other parts that are symmetrical with respect to the axis of rotation.
Oil injectors supply a small volume of oil; they are used for hydraulic dismantling of rolling bearings and other press connections, provided that the bearing or other part is directly seated on the conical surface of the shaft.
Providing a large volume of oil in the low pressure area (up to 50 bar), two-stage pumps automatically switch to the next high pressure stage, thus ensuring a high speed of work.
High pressure pumps are designed for mounting/dismounting of rolling bearings on shafts with a diameter of up to 250 mm. When a pressure of 4,000 bar is reached, heavy shaft couplings and gears can be hydraulically dismantled using pumps.
FAG hydraulic units
Adapters and inserts FAG
FAG adapters and inserts are used for threaded connection of high pressure pipes and hoses.
Additional materials:
FAG styli
Feeler gauges are used to measure the radial clearance, especially when mounting a bearing on a tapered shaft, adapter sleeve or withdrawal sleeve.
FAG measuring instruments for conical surfaces
When fitting a bearing with a tapered bore directly onto the shaft, the tapered surface of the shaft needs to be machined to exactly match the seating surfaces.
FAG Envelope Measuring Instruments
Transport and mounting devices
Robust, light and easy to handle, the FAG BEARING-MATE special tool is used as an aid for fast and secure mounting of large and medium-sized bearings, also for mounting preheated bearings.
Heat resistant gloves FAG GLOVE1
Heat resistant gloves are required when handling hot bearings or other parts during assembly or disassembly.
Heat and oil resistant gloves FAG GLOVE2
Heat and oil resistant gloves are required when handling hot and lubricated bearings during assembly and disassembly work.
FAG ARKANOL-MOUNTINGPASTE
This multi-purpose paste has proven its worth especially in the assembly of rolling bearings.
The use of paste facilitates the process of pressing on bearing rings, avoids jerky movement, as well as such negative phenomena as scuffing, scoring and diffusion corrosion. In addition, the mounting paste protects well against corrosion. It has a light color and does not stain.
Anti-corrosion oil FAG
Anti-corrosion oil intended primarily for bearings stored loose. Similarly, spraying with oil provides long-term protection against corrosion of unpainted surfaces of devices, assemblies and machine parts located in the room.
Bearing grease Arcanol
Arcanol
Rolling Bearing GreasesGreases SKF
FAG Motion Guard automatic lubricator
With the help of an automatic lubricator, fresh grease is supplied to the contact points of the bearing under constant control in sufficient quantity at a predetermined interval.
As a result, the service life of the bearing is significantly extended. Reliable and cost-effective, it allows you to extend lubrication and maintenance intervals and avoid under or over lubrication.
Automatic lubricator FAG Motion Guard COMPACT
This automatic lubricator is electrochemically actuated. Environmentally friendly citric acid is used as an electrolyte.
Automatic lubricator FAG Motion Guard CHAMPION
The Motion Guard CHAMPION automatic lubricator is operated electromechanically. The robust electronically controlled geared motor can be reused. It allows you to set a constant or variable duration of lubricant consumption.
Lubrication systems FAG Motion Guard CONCEPT6
This system provides a constant, accurate, temperature-independent supply of lubricant to one or more (up to six) points.
Lubricators FAG ARCA-PUMP
Devices are used for metered supply of lubricant to rolling bearings.
FAG grease gun with reinforced hose
When operating a rolling bearing under conditions of increased loads or adverse environmental factors, it often becomes necessary to provide lubrication of the bearing through a grease nipple.
Fine alignment and adjustment
FAG Top-Laser SMARTY2 9 Belt Pulley Aligner0003 The
Top-Laser SMARTY2 is an inexpensive measuring tool for accurate alignment of belt and chain pulleys. The use of the device reduces the wear of belt drives, bearings and seals. In this case, there is less vibration, which increases the reliability and service life of the mechanism.
FAG Top-Laser TRUMMY2 drive belt tension gauge
Handy and robust Top-Laser TRUMMY2 is an opto-electronic device for measuring and setting the optimal drive belt tension.
Shaft alignment tool FAG Top-Laser INLINE
The Top-Laser INLINE Shaft Alignment Tool is a computer-based system for aligning mated shafts in motors, pumps, fans and gearboxes with rolling bearings.
Gauge plates
Used to repair a vertical misalignment detected with the FAG Top-Laser.
FAG TempCheck PLUS infrared thermometer
The FAG TempCheck PLUS thermometer detects the surface temperature by detecting infrared radiation from an object. The non-contact measurement method makes it easy to determine the temperature of hard-to-reach and moving objects.
Temperature measuring instrument FAG TempCheck CONTACT
This portable instrument has a reading range of -60°C to +1000°C.
Together with the supplied surface temperature sensor TEMP-CHECK-CONTACT.SENSOR, it can cover the temperature range from -60 ˚С to +300 ˚С.
Acoustic detector FAG SOUND-CHECK
The use of an acoustic detector provides fast, simple and reliable noise monitoring in a rolling bearing.
FAG Detector II
Mobile device Detector II includes a device for measuring vibrations and a data acquisition system.
FAG Detector III
The Detector III device is made on the basis of the Detector II. Along with vibration control, non-contact temperature measurement and processing of received information, Detector III has an additional possibility of static and dynamic balancing.
FAG Easy Check Series
The inexpensive FAG Easy Check series are vibration monitors for monitoring critical bearing assemblies in machines that are in continuous operation, such as pumps, fans, electric motors, etc.
FAG Easy Check-Online
The FAG Easy Check-Online, unlike the basic Easy Check, is powered by an external power supply.
FAG DTECT X1
The FAG DTECT X1 system allows early detection of bearing damage by means of machine vibration analysis using an individually adjustable frequency range.
FAG WiPro
FAG WiPro, a cost-effective online system, is a condition monitoring system for wind turbines that facilitates the organization of scheduled maintenance of equipment.
FAG VibroCheck System
The online VibroCheck monitoring system is ideal for situations where reliable vibration monitoring of multiple machine components is required on a continuous basis, such as pulp and paper mills, rolling mills, and power plants.
FAG ProCheck
The ProCheck Vibration Monitoring System is a new generation, modular, online bearing monitoring system.
