200 lb ft torque wrench

r4e - Digital Ratchet Torque Wrench, 200 Nm / 147 lb-ft Capacity, 1/2in drive

Click images to enlarge.

Features

Includes NIST traceable Calibration Certificate
High accuracy ±1.5% F.S. both CW and CCW directions
Five programmable torque presets ideal for frequent operations.
Selectable units, lbf-in, lbf-ft, kgf-cm, N-m
ISO-6789 Compliant
Pass/Fail mode counts fasteners tightened within programmed High/Low limits, using LED and audible alerts
Peak, peak with auto zero reset and Real Time modes

Torque Ranges

Digital Ratchet Wrench Ranges

Model	lbf-in	lbf-ft	kgf-m	N-m	Drive
GEK030-R2E	13.4 - 265.4	1.12 - 22.12	0.160 - 3.060	1.50 - 30.00	1/4"
GEK030-C3E	13. 4 - 265.4	1.12 - 22.12	0.160 - 3.060	1.50 - 30.00	3/8"
GEK060-R3E	13.5 - 531.0	1.15 - 44.25	0.160 - 6.120	1.50 - 60.00	3/8"
GEK085-R3E	19.0 - 752.0	1.60 - 62.70	0.21 - 8.66	2.0 - 85.0	3/8"
GEK135-R4E	28 - 1195	2.3 - 99.5	0.32 - 13.76	3.1 - 135.0	1/2"
GEK200-R4E	46 - 1770	3.8 - 147.4	0.55 - 20.40	5.2 - 200.0	1/2"

Digital Adjustable Wrench Ranges

Model	lbf-in	lbf-ft	kgf-m	N-m
GEK085-W36E	19.0 - 752.0	1.60 - 62.70	0.21 - 8.66	2.0 - 85.0
GEK135-W36E	28 - 1195	2. 3 - 99.5	0.32 - 13.76	3.1 - 135.0
GEK200-W36E	46 - 1770	3.8 - 147.4	0.55 - 20.40	5.2 - 200.0

Specially Designed Jaws Maintain Consistent Working Length

Consistent working length, whether the jaws are open or closed, assures greater accuracy in measurement (measured from the bolt's rotational axis to the point where load is applied).

Forged Steel Ratchet Head

The 36 tooth gear and double claw ratchet allows a 10° angle and solid movement between clicks.

Wrench Union

Ordinary Socket Wrench Union

The ball in the square drive rests on a tapered surface of the pushpin and can be pushed in without pressing the pushpin, allowing the socket to detach unexpectedly.

Digital Ratchet Torque Wrench Union

The ball in the square drive rests on the small platform on the pushpin and cannot be pushed in without pressing the pushpin, resulting in no accidental detachments.

Optional Quick Spinner and Spinner/Converters

Quick Spinners and Spinner/Converters allow users to quickly rundown the bolt or nut using their fingers before applying torque.

BE2-Q 1/4" to 1/4" Quick Spinner
BE3-Q 3/8" to 3/8" Quick Spinner
BE4-Q 1/2" to 1/2" Quick Spinner

Spinner/Converters have a lower profile than convention adapters.

BAE23 converts 1/4" to 3/8" drive
BAE34 converts 3/8" to 1/2" drive

Quick Spinner	Spinner/Converters

BE2-Q 1/4" to 1/4" BE3-Q 3/8" to 3/8" BE4-Q 1/2" to 1/2"	BAE23 1/4" to 3/8"	BAE34 3/8" to 1/2"

Specifications

Downloads

Buy Now

View Cart

In stock

1 Week Lead Time (Estimated)

2-3 Week Lead Time (Estimated)

Lead Time Varies, Please contact us for availability.

Unavailable

Adjustable and Ratchet Digital Torque Wrenches

Click images to enlarge.

Features

Includes NIST traceable Calibration Certificate
High accuracy ±1.5% F.S. both CW and CCW directions
Five programmable torque presets ideal for frequent operations.
Selectable units, lbf-in, lbf-ft, kgf-cm, N-m
ISO-6789 Compliant
Pass/Fail mode counts fasteners tightened within programmed High/Low limits, using LED and audible alerts
Peak, peak with auto zero reset and Real Time modes

Torque Ranges

Digital Ratchet Wrench Ranges

Model	lbf-in	lbf-ft	kgf-m	N-m	Drive
GEK030-R2E	13.4 - 265.4	1.12 - 22.12	0.160 - 3.060	1.50 - 30.00	1/4"
GEK030-C3E	13. 4 - 265.4	1.12 - 22.12	0.160 - 3.060	1.50 - 30.00	3/8"
GEK060-R3E	13.5 - 531.0	1.15 - 44.25	0.160 - 6.120	1.50 - 60.00	3/8"
GEK085-R3E	19.0 - 752.0	1.60 - 62.70	0.21 - 8.66	2.0 - 85.0	3/8"
GEK135-R4E	28 - 1195	2.3 - 99.5	0.32 - 13.76	3.1 - 135.0	1/2"
GEK200-R4E	46 - 1770	3.8 - 147.4	0.55 - 20.40	5.2 - 200.0	1/2"

Digital Adjustable Wrench Ranges

Model	lbf-in	lbf-ft	kgf-m	N-m
GEK085-W36E	19.0 - 752.0	1.60 - 62.70	0.21 - 8.66	2.0 - 85.0
GEK135-W36E	28 - 1195	2. 3 - 99.5	0.32 - 13.76	3.1 - 135.0
GEK200-W36E	46 - 1770	3.8 - 147.4	0.55 - 20.40	5.2 - 200.0

Specially Designed Jaws Maintain Consistent Working Length

Consistent working length, whether the jaws are open or closed, assures greater accuracy in measurement (measured from the bolt's rotational axis to the point where load is applied).

Forged Steel Ratchet Head

The 36 tooth gear and double claw ratchet allows a 10° angle and solid movement between clicks.

Wrench Union

Ordinary Socket Wrench Union

The ball in the square drive rests on a tapered surface of the pushpin and can be pushed in without pressing the pushpin, allowing the socket to detach unexpectedly.

Optional Quick Spinner and Spinner/Converters

Quick Spinners and Spinner/Converters allow users to quickly rundown the bolt or nut using their fingers before applying torque.

BE2-Q 1/4" to 1/4" Quick Spinner
BE3-Q 3/8" to 3/8" Quick Spinner
BE4-Q 1/2" to 1/2" Quick Spinner

Spinner/Converters have a lower profile than convention adapters.

BAE23 converts 1/4" to 3/8" drive
BAE34 converts 3/8" to 1/2" drive

Quick Spinner	Spinner/Converters

BE2-Q 1/4" to 1/4" BE3-Q 3/8" to 3/8" BE4-Q 1/2" to 1/2"	BAE23 1/4" to 3/8"	BAE34 3/8" to 1/2"

Specifications

Downloads

Buy Now

View Cart

In stock

1 Week Lead Time (Estimated)

2-3 Week Lead Time (Estimated)

Lead Time Varies, Please contact us for availability.

Unavailable

Torque wrench units. How is the force of a torque wrench measured?

Torque is an internal force that occurs in an object under the action of a load applied to it. Any threaded connection has a certain optimal torque, which depends on the material, thread diameter, size and strength class of the fastener. In order to transfer the necessary moment of force to the connection, a special tool is used - a torque wrench. nine0003

Force can be measured in different units. As a rule, several different units of torque are displayed on the scale of a torque wrench. In order to avoid errors during operation and conversion to the desired system of values, before buying and using a tool, you must make sure which units of effort are used on a particular tool model.

How is the force of a torque wrench measured?

The main units of measurement of the force of torque wrenches: nine0003

N/m or Newton per meter;
Kg/m (kgf/m) or Kilogram per meter;
Kg/cm (kgf/cm) or Kilogram per centimeter;
lbf/ft (lb/ft) or Feet pounds.

Force transfer table

nine0028 0.138

	kgf/m	N/m	lbf/ft	kgf/cm
1 kgf/m	one	9.806	7.233	100
1 N/m	0.101	one	0.737	10.197
1 lbf/ft	1.355	one	3.825
1 kgf/cm	0.01	0.098	0.072	one

Using this table, you can easily convert the units of the torque wrench to the required system of values. nine0003

Complete conversion table for typical values

Torque wrench units on tool

The picture shows a dial torque wrench that has two torque measuring systems: kgf/m and lbf/ft.

Shown here is a click-type limit torque wrench that has two scales on opposite sides of the tool in N/m and lbf/ft systems. nine0003

An electronic torque wrench in most cases uses all major torque measurement systems, making the tool not only the most accurate to use, but also versatile, capable of working in different units. Using the menu buttons, the digital torque wrench allows you to select the required measurement system.

Total

When selecting a torque wrench for a car or for other work, it is necessary to take into account the units of measurement in which specific work is performed so as not to convert to the required values. nine0003

Useful materials:

Types of torque wrenches
How to properly use the torque wrench
How and which torque wrench to choose
Bolt Torque Charts

GEARWRENCH Electronic Torque Wrenches 85078 Angle

Torque Wrench Guide
Electronic Torque Wrenches, Micrometer Torque Wrenches, Certified Torque Wrenches, and Beam Torque Wrenches

Electronic angle torque wrenches

Digitally tracks torque and angle measurement. Several warnings when the specified torque is reached to prevent over-tightening of the bolts. The handle vibrates, a buzzer sounds and alerts the LCD screen when the set torque is reached.
Three function modes: peak torque, angle and peak angle
Target Torque Warning and Target Angle Warning warn when approaching the target torque or target angle, so the chance of overtightening the bolt is reduced.
Clockwise accuracy +/- 2% and +/- 3% counterclockwise, 20% to 100% of full scale

Angular accuracy (+/- 1% of reading) + (+/- 1 degree at angular velocity > 10 degrees/sec <180 degrees/sec) + (+/- 1 degree test fixture)
(inputs) Weight
(LBS) 85078 3/8 ′ 01 pound -ground 900 - pound -ground 9 £ November C7: 1 7 25 '675 2.0] 85079 1/2 ¹ - 250 Fut -Fund 01 pound -foot 01 pound -foot 01 pound Nm 01 No.

72 385 1.58 25C 338

Electronic torque wrenches

Several warnings when the specified torque is reached prevent over-tightening of the bolts.
Handle vibrates, buzzer sounds and LED stays on

Torque Target Warning warns as torque is approached, so the chance of overtightening the bolt is reduced. nine0029 0.1 фунт-фут 88.5 дюйм-фунт -1194 дюйм-фунт 1 дюйм-фунт 72 0.70 1.25 15.75 1.88 85077 1 / 2 " 30 nm-340 nm 0.1 nm 25.1 pound-
250 0.85 1.58 25.75 2.79

Beam Torque Wrenches

Pointer moves clockwise or counterclockwise to measure torque in standard or metric scale.
Accurate to +/- 7 degrees
Suitable for service by bending the pointer to zero prior to use
1/4" actuator fitted with ballpoint pen for force localization and accuracy

3/8" and 1/2" actuators fitted palm-friendly handle that rotates on the beam to maintain a constant distance from the drive point to the load point for accurate measurement.

nine0027 2955n 1/4 " 0–80 inches per pound 2.5 inch flunt 0 nm 0.25 nm 29566 "" -lb - 150 ft-lb 550 85065 850 8508550 8 inches DR 5 - Flexible head 75 Foot -Funds

0.50

0 pounds per inch - 800 pounds per inch

50 inch flunt

0 nm - 90 nm

12.00 Nm

16.00

5 lb-ft

0 nm - 190 nm

Meets or exceeds ASME B107.300

Closed head design for exceptional resistance to dirt penetration

Teardrop low professional file head and flush mounted on/off switch for better access in confined spaces

33.9 - 210.2 Нм

1.4 Нм

0.81

1.75

21.9

3.1

85066

1 / 2 "

30 - 250 фут-фунт

2 фунт-фут

54.

2 - 352.6 Nm

Pull the adjusting sleeve to change the torque setting easily and quickly.

Midpoint on handle clearly marked for accuracy

Primary Scale Range - Max.
Torque

Part No.	Disc Size	Primary scale increments	Secondary scale - Maximum torque	10.17 - 105.1 Нм	0.68 Нм	30	0.72	1.4	17.7	2.42
85087	1 / 2 "	30 фут-фунт - 250 фут-фунт	2 Fut -Funt	54.2 - 352.6 nm	2.7 nm	36	0.93	1.75	25.25	3.82

000 Dynamometric key for Microme.0011
Used to test wheel nuts for the manufacturer's recommended torque.

Helps prevent distortion of brake rotors caused by overtightening

Durable "tire protector" rubber coating on head, retaining ring and handle provides cushioning effect, reducing tool fatigue and damage.

Clockwise accuracy +/- 3% from 20% to 100% of full scale

Accuracy clockwise +/- 3% from 20% to 100% full scale

Assists or exceeds the ASME B107.300

The rotary shuttle clamp provides a reliable locking mechanism
9000 9000

Disc size Primary scale range - Max.
Torque Primary Scale
Surcharges 85065 3 /4 " 100 Fut-Fund-600 Fut-Fund 2.5 Pound Foot 152.6-830.6 Nm 3.4 Nm 1.14 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2. 62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.6OUSE

Certified Micrometer Torque Wrenches

A range of torque wrenches can be ordered with a “Certificate of Calibration.” The certification is documentation of the actual calibration of the torque wrench and includes model number, serial number, date, actual torque value, information about test equipment and calibration standards for test equipment

3/8 inch DR 10-100 foot Funds 120xp with a ratchet mechanism

85176CERT

85062

3/8 inches DR

850629

85086Cert

85063

1/2 ″ DR 200 Fut -Funt

85063CERT

85181

200 lb ft torque wrench

r4e - Digital Ratchet Torque Wrench, 200 Nm / 147 lb-ft Capacity, 1/2in drive

Features

Torque Ranges

Digital Ratchet Wrench Ranges

Digital Adjustable Wrench Ranges

Specially Designed Jaws Maintain Consistent Working Length

Forged Steel Ratchet Head

Wrench Union

Optional Quick Spinner and Spinner/Converters

Specifications

Downloads

Buy Now

Adjustable and Ratchet Digital Torque Wrenches

Features

Torque Ranges

Digital Ratchet Wrench Ranges

Digital Adjustable Wrench Ranges

Specially Designed Jaws Maintain Consistent Working Length

Forged Steel Ratchet Head

Wrench Union

Optional Quick Spinner and Spinner/Converters

Specifications

Downloads

Buy Now

Torque wrench units. How is the force of a torque wrench measured?

How is the force of a torque wrench measured?

Force transfer table

Complete conversion table for typical values ​​

Torque wrench units on tool

Total

GEARWRENCH Electronic Torque Wrenches 85078 Angle

Learn more

Complete conversion table for typical values